I'm having a problem when someone calls, I can't hear them but they can hear me. Once I soft reset, everything's peachy. Just today I used my phone (pda2k with i-mate 1.40 rom) several times. Everything was fine. I turned the flight mode a couple times today. Then, I turned on flight mode, let the phone sit for a while and had an incoming call...I couldn't hear them. I told them to call back in 5 minutes. I tried calling another number but couldn't hear anything, did a reset and everything was fine.
This has happened before and after the 1.40 upgrade. Anyone have any reason why?? I've tried turning the flight mode off and back on, but that didn't help either.
Thanks,
Tom
This is an known issue in 1.40 ROMs, and currently there is no solution.
Dont blame ROM 1.40 because you also face this problem when using ROM 1.31
No solution so far but a trick's available here: http://forum.xda-developers.com/posting.php?mode=reply&t=22239
Solution
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
I don't know if this can help to solve the problem but I wanted to mention that I never had this problems when I was using vodafone, but after I changed the sim card this probleme occured
Solution
The Solution is TURN ON your BLUETOOTH and then TURN OFF your bluetooth.
Re: Solution
asim_ag said:
The Solution is TURN ON your BLUETOOTH and then TURN OFF your bluetooth.
Click to expand...
Click to collapse
Unfortunately for me this actually triggers the no sound issue! My device is fine until the first time I use bluetooth then I can almost 100% guarantee that the next call will be silent.
As stated before with the 1.40.00 rom, this issue is certainly linked to the Bluetooth driver, perhaps on use it is switching audio to their driver for headset use and not restoring it?
Are you using sbp Plus, because this application has issue with bluetooth. Try to close all application not to minimize them when you are done with it. Use PocketNav or Magic Button for that.
Re: Solution
ThExSenatoR said:
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
Click to expand...
Click to collapse
Can you tell me if the BT has to be started like you described when you use Tom Tom? Normaly Tom Tom starts the BT automaticaly when it starts. Thanxx
hi
I get this problem a lot when I've had the phone on silent or vibrate and then change it back. I think it mainly happens when I receive a call after this rather than make an outgoing one but after the 1st call even outgoing ones have no sound.
It sounds daft but after a couple of months where I reset whenever it happened I just by chance hit the volume slider & sure enough the in call volume was turned right down. It's worth checking as it's an easy fix for me!!
Kill process
The solution for the problem could be to not run the BT driver. Anyway it's possible to delete from startup the dirver and to run when it need (for GPS or headset...).. But is there a way to kill the BT process without reset the machine (that without BT in the startup does't run the driver) whit a simple "TAP" ?
Thanx... M.
I hope I put my Reply on the right forum, but however...
I recently bought a QTEK9090 via Ebay and also I have the "I can't hear incoming calls..." problem.
Radio 1.06.02 and ROM 1.22.ooWWE. I understand from the postings in this forum that only a few (approx 10 to 15) have a problem and the rest of the world does NOT.
Strange but due to this I am really thinking to replace it by a P910I, as a phone should be able to pick-up calls. I haven't decided because the 9090 is a great machine.
Doesn't anybody have a clue, even not the manufacturer ??
Hi,
i had the same problem. Than i followed the advice above from someone deleting the autostart BT and using the btray.lnk instead. Absolutely fine since then.
greetings
Using the XDA IIs.
Until we get a proper fix, I am using the manual Run_BTTray method to turn on the BT if I need to use my headset.
So what I do is, (a) normally, no BT tray, (b) to use my BT headset, use Run_BTTray to turn on BT tray, (c) use ATBluetooth to actually turn on and off the BT radio, and finally (d) soft-reset to remove the BT Tray when I'm done.
I know it sounds complicated, but is ok after I assign the commands to my buttons (XDA IIs, plenty of buttons!).
What about the pda2k UniDirectional Patch.sa.cab available on the clubimate site.
I had this problem with ROM 1.40 as well as with the previous ROM. I have installed this patch. I have not had this unidirectional problem since then but I am not sure if this will work in the longer term as I have installed the upgraded ROM and the patch only a few days from now.
Love to hear comments of other members who have tried this patch.
Kind Regards
srmz said:
What about the pda2k UniDirectional Patch.sa.cab available on the clubimate site.
I had this problem with ROM 1.40 as well as with the previous ROM. I have installed this patch. I have not had this unidirectional problem since then but I am not sure if this will work in the longer term as I have installed the upgraded ROM and the patch only a few days from now.
Love to hear comments of other members who have tried this patch.
Kind Regards
Click to expand...
Click to collapse
The patch works.... atleast I didnt get the no voice problem after the patch (touch wood :twisted: )
So, I've been searching, and this may be covered, but I seem to have the problem in REVERSE. I can hear the other party when using my BT headset, but they can't hear me! On one call, it'll work, then on another, it won't, and then it'll stop working. I have ROM v.1.40.00 and Radio 1.13.00 I don't know what I could do to fix this problem...
Any suggestion would be appreciated...Although I'm not keen about removing the BT tray from the startup, only to soft reset just to remove it...
Thanks,
Q
does this problem remains in the WM5 ?
I wouldn't know...I'm still on WM2003SE....BTW, I have a Siemens SX66.... Anyone? Please?
Related
PLS forget this, after use BT head set several time, the same problem had been happened! Sorry about this!
BT Head set problem of un-resume with incomming call when the device is suspending. how to fix!
@;Download XDA2s_1-12-178-WWE_UK_Extended_ Rom.zip from below.
http://forum.xda-developers.com/viewtopic.php?t=13072
@And extract the zip and find BA_OEM_PD_BT_Headset.sa.CAB
@Copy&Past BA_OEM_PD_BT_Headset.sa.CAB into Blue Angel and tap it to install.
@Make worm reboot and you can already finish work for replacement the new version of BtCEStack.dll (V1.604)
@@@You can also download same CAB file (but i renamed to BT_Headset.cab) from http://www.asukal.jp/BT_Headset.CAB
Now Blue Angel had became the All Mighty Machine!!!! Enjoy it!
you can see same summary on my Blog
http://asukal.seesaa.net/article/1182756.html
Also you can see how to get the missing function of dial network client service on BlueAngel (replacment of the BTWIzardPrifile.dll)
http://asukal.seesaa.net/article/1031857.html
Attention for this thread
PLS forget this,
after use BT head set several times, the same problem had been happened!!
(sometimes effective,but sometimes not effective,also sometimes auto resume the device.not sure it`s side effect or natural function of this patch)
If you want to try this, plese dont forget it is your own lisk!
------------------------------------------------------------------------------
*for The Guys who already installed and wishes to uninstall due to some side effect. You must delete them manually with following steps.
@If you are using BT function, please turn off the BT, and make worm reboot it.
@Connect IIs to PC with Activesync, and use PC explore (Or use failer which can access dinamic librallies on IIs)and find following 3 files in the windows folder of IIs.
BTAudioGW.dll
BtCeStack.dll
HFPUI.exe
@Rename them to the names to eazy find them in next step（Example;"a" or "1", and make worm reboot again, then you can delete it. You can not delete those 3 files without rename. They were untachable.
@Make it worm reboot again. it have finished already and return to the default!
has anyone found this to work?
Has this worked for anyone? This is the biggest problem with the PDA2K...
Didn't work for me. This BT Headset problem really is a pain.
We were all looking for a solution to the voice dialling problem with the BT Headset on the XDAII and there's no solution to that.
Now a year on, a new 'improved?' model and to cap it all there's no solution to even getting a reliable BT Headset connection!
Now new test of solution
http://asukal.seesaa.net/article/1204039.html
Please watch my test!!!! but i am still not sure for myself!
Somebody please post your result with OzBT
Now my bluetooth head set still working with this ozBT.
But i think my result can't say it all for you,guys.
if somebody tried this, pls post your result, worked or not! Please.
After 3 days test, its workable for ME
PLease see folowing new report! seems to be workable!
http://asukal.seesaa.net/article/1219842.html
BT headset problem
Thanks vey much for all this work trying to resolve this Blue Tooth problem. However, as a newbie with my Tmobile MDAIII, where can I get official upgrade files, ROMs, etc. unless it is only from this site? In other words,
is there a Blue Angel support site in English anywhere?
Thanks!
I follow instruction of Asukal and now BT headset are usable after standby of pda2k.
Now the only problem I have are that sometimes ppc wake up without motivation. the problem was present also before use ozbt and O2 patch.
Thank you Asukal!
BT headset problem
I've tried and it works fine with jabra 250 and kondor bt 25.
Thanks Asukal you solved my big big problem.
Thanks Again :lol: :lol: :lol: :lol: :lol: :lol: :lol:
Re: After 3 days test, its workable for ME
Asukal said:
PLease see folowing new report! seems to be workable!
http://asukal.seesaa.net/article/1219842.html
Click to expand...
Click to collapse
Sure it did Asukal :lol: , don't know what to say,
thaaaaaaaaaaaaaaaank youuuuuuuuu
works great on my Qtek-9090
good work :wink:
thanks guys!
Appreciated your posting, guys!
since my last post, noboday reported my work was usefull or not.
i have been afraid i am about to become a faker! :wink:
And glad to hear that was worked for you guys!
But please do not forget, sometimes suddenly fail to reconize BT head set.
, then you can re-detect it again, you can use it again.
Do not panish me if that time come please <very little probablity>
Answer to the Mr,Guest>
@this blue tooth patch was downloaded from this forum
@you had better not to inquire anything to the XdaO2IIs support center, they are not specialized mechanics for the PDA, but just a mobile phone serveice center, they will replay you with quite different solutions to your question, it make you worth. this is my suggestion.
Mr,ilvanni> auto wake up without any motivate.
Yes i knew it, but it was not coz of OzBT, but coz of BT patch. before i tried OzBT, it also happened with BT patch. Hope you watch the battery.
--------------other way of solution for this--------------------------
Some Thailand Guy said, use the softoware to turn off the screen(but the windows is runnning), works for this BT head set problem, too.
You can try this,too. (i forget to the name of soft---may be "Screen OFF" or something like that.)
but sorry i didnt try this. need much more attention for the battery.
Re: After 3 days test, its workable for ME
Hi Guys,
I'm a bit new to this pocket pc business. I can see where your coming from, but when I try this my screen, particularly the Todat screen, wont refresh properly, ie you cant read it!
Any ideas?
Sorry i cant catch what you want to say exactly,i guess two situations.
#1;Does it mean today plug-in soft were can`t be appeared aftre wake up?<with using ozBT>
On IIs(or PPC2003) has some non-conpatible with the previouse version of Today Plugs-in Soft<World Today, tAgenda, or exToday,etc>
#2;or does it mean IIs can`t return to windows? some like freeze with susspend? if this case, i have no exipierience about that yet. sorry.
Sorry for not being clear!
What I am saying is that the video display of the "Today Program" ie the start up screen is corrupt. Any window, such as the Bluetooth driver message, stays on the screen. When you press the start button it appears on top of this and the display is corrupt. The device is still working anbnd clicking an any "full screen" application displays normally. The Today screen remains corrupt when you return to it.
Anonymous said:
Sorry for not being clear!
What I am saying is that the video display of the "Today Program" ie the start up screen is corrupt. Any window, such as the Bluetooth driver message, stays on the screen. When you press the start button it appears on top of this and the display is corrupt. The device is still working anbnd clicking an any "full screen" application displays normally. The Today screen remains corrupt when you return to it.
Click to expand...
Click to collapse
Switching the Today background to something else, them back again, sorted this for me.
Today programs disapear
Now i got it.
i think it was coz of the New OS, even without those patch, some times happen to me.Or memory condition. Blue Angel lost memory very quick and be stacked easly(too much devise resources--wi-fi,bluetooth,keyboadm many hard bottms--- used i think)
(Himala upgraded with 2003Se is better)
the solution fo this,Mr,Sparkeyxda has right answer, i also try to open option----today---and off/on today plugs in, then return to today. they will come again.
I think it coz of un-compatible of old today programs.
So this moment, i gave up use some of Today programs.
sorry if someboday have better solution, please tell him!
I had the same problem and changing the theme back and forth like sparkyxda solved it for me.
is this worth trying on QTEK9090 ?
The bluetooth problem on 9090 is that whoever calls 9090-user wih BT headset, will hear him/herself really well.. it is as if the audio that is suppoed to get to 9090-user-ear *also* is sent back as if that was somthing 9090 used said. very clear audio loopback
Hi Akusal i wonder if you are working to solve the BT hands free problem & if you need anyhelp testing devices or SW i can do that
I'm having the same problem for a week now...
I was on the street with my BA making calls and all went Ok. I use it for my work, so I do lots of calls a day. Suddenly, I realized, when I call, that the other can not hear me, nor can I hear them! The counter is running, the screen says "Connected". I haven't done anything to change the configuration, nor it have dropped it from my pocket.
I'¡m getting crazy. I don't know what I've done wrong.
Things tried unsuccessfully: Crying or Very sad
-Lots of device resets..... Between tryes and Updates.
- Reinstalled WM5 using a different ROM. Now I have TM 1.3. [http://forum.xda-developers.com/viewtopic.php?t=42632]
- Upgraded Radio to 1.15 (previously, I had 1.13)
- Used a Bluetooth headset. It worked, I could hear the sound from the phone, at least. Only thru the bluetooth headphone. Still, I could not hear any phone-sound from the loudspeaker when I turned off the headphone and the bluetooth headset were disabled, even with the Bluetooth signal ON, as suggested on other post. Each try with a new call. The weird thing is that I CAN hear the loudspeaker when I hear music or the system sounds... :?
- "Installed" the Unidirectional patch (copied the AudioGW.dll file over the old one successfully, reset, etc..)
- Turned off the device and leave it off for a while. Take off the SIM card, touch it (cosmic vibrations Embarassed) Sometimes, before, the SIM card went a little nuts if I resetted the device too much -maybe Confused- or if I got the battery off...
- Last, I've downgraded to the latest WM2003 ROM. Formatted the Storage Space and resseted the Registry Hive. No change. All else is working.
My options are finishing ....
Sorry if this has been posted before, but, at this point, when I've been tried almost (I think) everything, i couldn't find anything relevant using search.
Please, any help will be greatly appreciated!!! Maybe I can use at least a link to another thread..
Thanks
try downgrade your RADIO to 1.13
I've allready upgraded to 1.15 because of this problem. Anyway, I've downgraded just now and nothing same problem..... also: I can not get the handsfree-loudspeaker mode (pressing the "call" button for a while). Just nothing happens
Let's hope mamaich or other cracks read this post
Thanks for ur answer
indra9110 said:
try downgrade your RADIO to 1.13
Click to expand...
Click to collapse
HEEEEEEEEEEEEEEEELPPPPPPPPPPPPPPPP ((
ow... DONT PANIC !!! try flashing once again ... including ROM & RADIO
Rom & Radio flashed again. At no avail
I've used, lastly, the "standard" Rom posted on I-mate website (www.clubimate.com) [ROM: 1.40.00 WWE; Radio: 1.12.00; Protocol: 1337.42], just to checkout and everything (regarding this problem) remains the same.
I've, however, noticed that, before, when I used the volume slider up, first the PDA-volume went up, later the phone-volume. Now it only fully moves up the PDA-volume. I think this have something to do...
Again: Please, help me!!!
Thanks for your answer!!
indra9110 said:
ow... DONT PANIC !!! try flashing once again ... including ROM & RADIO
Click to expand...
Click to collapse
Still the same after 3 flashing sessions
Two days ago, I've sent an e-mail to I-Mate. They have answered me yesterday telling me to hard-reset :?:evil: and if that doesn't work, to send the device to France or Portugal for fixing. Here on Spain there's no place where to send it.
I think it should be a software problem (maybe) that's why I'm asking help here.. Also, the problem with the volume slider up only occurs on W2003, not on WM5
What should I do??
Anyone?? HELLOO?
i've had this problem for a long time, and tried so many different patches non worked, but there is a way to deal with this issue u need to keep ur bluetooth on all da time or remove the file BTTrayCE from this directory
Mydevice>windows>start up
and copy this file to ur storage card if later u want to use ur Bluetooth so wat removing of this file does is that the icon in of bluetooth in tray bar will not appear automatically after u restart ur machine .
hope this helps
At no avail , but many thanks anyway.
I've seen this solution on other posts and I've tried it before. Without luck
Even the 'bluetooth on all the time' alternative. Without luck
Also, I'm now on TuMa 1.3 (WM5). The file relative to bluetooth on the startup folder is "BTIcon", wich I have moved as you stated. Without luck
Maybe the file you tell is for WM2003 ?? Could it be? Is the file named 'BTTrayCE' on WM2003 and 'BTIcon' on WM5?
I'm really desperate.
arran83 said:
i've had this problem for a long time, and tried so many ...
Click to expand...
Click to collapse
umm yeah i'm sorry, mine is running WM2003, maybe u should try downgrading to 2003 as well since i've done it and now i'm having less problems, i really don see much of advantage in using 2005, good luck.
ok here is a patch that is supposed to fix this problem but hasn't worked on mine, i just attach it here it might work on urs, or u might already have used it.
Sometime back, I had come across a post on a similar problem. I think what you have is a erratic headphone jack..I believe there is a micro (?)switch in there which connects headset and disconnects speakerphone.
I had a similar problem sometime back, and just put the headphone jack in there, jiggled it a bit and it started working. basically released the switch. your symptoms point to a similar problem...does not have anything to do with Radio ROM. Has not given me problem since then
here you go..
http://forum.xda-developers.com/viewtopic.php?t=33207
Yup, I've seen this forum before. If it has to do with a headphone problem, then It shouldn't be heard anytime, and I CAN hear music and such from the device when it isn't in a call. Anytime I put the device on the "call" state (dialing, connected, hold, etc..) the sound goes out. :-S
So, it should not be a headphones problem.... should it??
deepakr said:
Sometime back, I had come across a post on a similar problem. I think what you have is a erratic headphone jack..I believe there is a micro (?)switch in there which connects headset and disconnects speakerphone...
Click to expand...
Click to collapse
Yes, I will, for nth time... No solution yet... I will apply the Unidirectional patch again on WM2003 to see... Keep you posted..
arran83 said:
umm yeah i'm sorry, mine is running WM2003, maybe u should try downgrading to 2003 as well since i've done it and now i'm having less problems, i really don see much of advantage in using 2005, good luck.
Click to expand...
Click to collapse
OK, I've tried, for nth time, going back to WM2003SE (112 T-Mobile) and applying the unidirectional patch I've found here (I think is the same posted on the I-mate site I've tested before) and NOTHING changes...
Still the same problem.
Any clues?
hi !
try like me... in bt setting-->accessibility-->disable all access options..
to me this little trick cut off every problems on use the phone....
hi
OK, I'll give a try :? (Again going to WM2003, as I think is that what you have right?)
No Sound on BA
Hi there. Have pda2k, rom-1.40.00, radio-1.12.00. Have previously lost sound during call. Can be heard but cannot hear. Phone have been exchanged under warrantee, but new phone developed same problem after using BT to connect with PC. Currently I turn on the speakerphone in order to converse. Any help?
Re: No Sound on BA
I can not turn on the speakerpone.....
pjax said:
Hi there. Have pda2k, rom-1.40.00, radio-1.12.00. Have previously lost sound during call. Can be heard but cannot hear. Phone have been exchanged under warrantee, but new phone developed same problem after using BT to connect with PC. Currently I turn on the speakerphone in order to converse. Any help?
Click to expand...
Click to collapse
I also have a similar problem - when in phone mode, other side can hear me but i cannot hear them, if i plug a headset with microphone the other side hear me and i also have sound from other side.
if i unplug the headset, i cannot hear the other side but the other side can hear me.
are there microswitches inside the headset plug for both microphone and speaker (two microswitches) ?
thanks, yol.
Most of you would have upgraded successfully from WM 2003 rom to various WM5 rom. For me, I started using Helmi's 1.30 rom, 1.32 rom, 1.4 and 1.4 vanilla rom, Xplode AKU 3.3 and 3.5, and just on Tuesday, tried Helmi/Logout rom (I choose to call this rom as such as pointed out by Helmi, Logout had used more than 90% of his work).
All the roms are great, but each had given me some problems, due to the fact that I have many programs installed, nothing to blame Helmi, Xplode or Helmi/Logout. All the roms when freshly installed gave me very stable results, i.e. BT and Wifi on off. From Helmi's 1.4 rom, I got to enjoy A2DP. From Xplode's rom, I got to enjoy clean basic BA WM5 rom. From Helmi/Logout rom, A2DP and stable BT and Wifi on off.
This the experience that I want to share, and I hope you will find this useful.
For all the roms so far, what I did was to hard reset, flashed the rom, test that BT and Wifi can on and off, and start installing all my other apps one after another without soft reset, unless the app asks for it. Along the way, I will find that BT and/or Wifi will not start.
With Helmi/Logout rom, I did the same as above. After a number of apps installed, I experience again either BT and/or Wifi problems. Then something hit my mind! Why don't I do a soft reset after each app installation and after that, check for BT and Wifi power on and off. Guess what, I managed to install majority of the apps to my BA and BT and Wifi still powers on without problem. Here's a list of apps I have:
1. PocketZen Phone
2. Pocket Dashboard
3. GPSGate
4. Mapking 7
5. Garmin Que
6. Spb GPRS Monitor
7. Spb Time
8. Spb backup
9. Spb Imageer
10. Resco Explorer
11. Resco Audio Recorder
12. Virtual Pool Mobile
13. Bubble Buster
14. SKTools
15. XCPUScalar
16. GB-Soft Tweak
17. Tengo Thumb
18. Bejeweled
19. Ezdial
20. Lexisgoo English Dictionary
21. psShutXP
22. Styletap Launcher
23. MS VC 1.6
I still have a number of apps that I had not installed but with 23 in and still running fine with BT and Wifi, I'm very satisfied. So I suggest to those who complain about BT and Wifi problem, or any other problem, try what I had done, i.e. do a soft reset after installation of each app and share with others your success.
Hope all of you will find this useful.
Cheers and thanks to Helmi, Xplode and Logout.
Damn, noone figured that out before, that some apps may screw the settings!! :| Gotta do some tests...
So basically we should not bother with preparing an Ext Rom with all the programes we want, and instead Install and Soft Reset each one seperately?
I'll try it next time i flash my rom, thanks!
That was a good share zard!
WiFi now misses firing up in the helmi/logout ROM when it used to be working fine, unfortunately I didn't know which program I installed when it stopped working.
Just some thoughts, if somehow bluetooth/wifi registry settings gets screwed up after prog installation without soft reset, would it help if we change registry file type from hive to file-based? Registry changes gets written immediately each time with file-based, that is what I read somewhere.
Anyway, I really wouldn't mind doing 20+ soft resets just to get that 100% WIFI/BT powering up!
Thanks again!
Fast Battery Drain Problem found
dear all
we Really appricate your post since i have found AKU 3.5,rom 5.04.10wwe
with extend rom Logout 5.04.10 by helmi.
There is Serious issue i have found,Battery Drains in actual Usages for 8hrs.
but may be some fixes may resolve this issue I hope,This rom Very much Stable as i have not checked only WIFi but other applications and third party Softwares does work fine as till now.
after insatlling standarize2.cab and powermanagementpatch_116.cab still this problem not solved for me.
There is One Extreamly diffrent behavior found back light of BA auto swithon if phone is All Keys locked mode or not ,without touching Ba the lights does shows this behavior.May some people has used this rom found this Unique problem till now.
Other problem I found With MS voice Command 1.06 doesnt work with incoming call aleart<other features works perfectly like MENU- profile- music-and etc
I Am very much statsfied with this Rom The most Successful and Stable rom i found Atlast........Thanks to Helmi
Hi Zard
Hi Zard
Thanks for your information, it is very useful.
I am also running on Helmi's / Logout's rom.
I managed to install a lot of programs without affecting BT/WIFI.
I can turn both on / off without a problem. However, I have problem with BT, I can not have two BT devices connected at the same time. When I have my BT headset connected and I try to connect to my BT GPS receiver, it will not work!!
Do you have this problem or do you have a solution for this issue? I did not have this problem on Helmi's 1.4 rom (did not try vanilla though).
Thanks again.
rhmartin said:
That was a good share zard!
WiFi now misses firing up in the helmi/logout ROM when it used to be working fine, unfortunately I didn't know which program I installed when it stopped working.
Just some thoughts, if somehow bluetooth/wifi registry settings gets screwed up after prog installation without soft reset, would it help if we change registry file type from hive to file-based? Registry changes gets written immediately each time with file-based, that is what I read somewhere.
Anyway, I really wouldn't mind doing 20+ soft resets just to get that 100% WIFI/BT powering up!
Thanks again!
Click to expand...
Click to collapse
I don't know about what is the difference between registry file type of hive and file-based but whoever knows and can do something about it would be good. Though it was terrible to do so many resets and I guess its worth it after all.
creations_31 said:
dear all
we Really appricate your post since i have found AKU 3.5,rom 5.04.10wwe
with extend rom Logout 5.04.10 by helmi.
There is Serious issue i have found,Battery Drains in actual Usages for 8hrs.
but may be some fixes may resolve this issue I hope,This rom Very much Stable as i have not checked only WIFi but other applications and third party Softwares does work fine as till now.
after insatlling standarize2.cab and powermanagementpatch_116.cab still this problem not solved for me.
There is One Extreamly diffrent behavior found back light of BA auto swithon if phone is All Keys locked mode or not ,without touching Ba the lights does shows this behavior.May some people has used this rom found this Unique problem till now.
Other problem I found With MS voice Command 1.06 doesnt work with incoming call aleart<other features works perfectly like MENU- profile- music-and etc
I Am very much statsfied with this Rom The most Successful and Stable rom i found Atlast........Thanks to Helmi
Click to expand...
Click to collapse
I just tested MS VC 1.6 and the incoming call alert seems to work only when Notifications is set as 'Annouce notifications through device speaker or wired headset only'. Probably, the BT is still not perfect but still, I'm more than satisfied with the BT now since A2DP works for Media Player, Mapking 7, Garmin Que and even voice dial through Mic of BT headset and voice instructions from BT headset when you activate MS VC 1.6 through the hardware button. Voice dial won't work through BT headset if MS VC 1.6 is activated from BT headset. I'm using i-Tech Clip radio BT headset.
just yesterday, i had that same old problem of BT not turning on... after countless soft resets after either turning BT on comm manager or BT settings, it still wont turn on. wifi is ok, just the bt. so i gave up and went on my day without BT. and just now, after reading these latest posts, decided to test BT again. and it works fine again! no new app installed, nothing changed. it had also happened in the past. hmmmm got you all thinking again i wonder
how do u guys manage to install application in Helmi AKU 3.4 v1.4? Using EXE or CAB?
i just flahsed mine yesterday and when i try to install CAB...it seems that the application is NOT installed correctly..
Hi all,
can anyone let me know where i can find this rom (Helmi/Logout) and may be some installation instructions ?
Thanks in advance
Chris
have u checked thru the forum?
the link for logout rom is existed inside helmi v1.4 thread too.
Hi everybody..
I've recently flashed my Diamond to WM 6.5, Radio v1.11.25.01, ROM [Kitchen][WWE] LD21234-R1.00 [WM6.5][21234][2.07 Base], using S2U2, works (worked) perfectly, after 2 days I'm not able to accept calls on the phone, calls display normally but neither the hardware button nor S2U2 works to accept the call, can only ignore or mute. Thought it might be because of BT being turned on, didn't help, can only accept calls via BT handsfree.
Anybody having an idea what that might be? also I'm not satisfied with the signal strength, went down by approx. 30% according to Radio v1.00.25.05.
THX for all help..
if u uninstall s2u2 does it work??
If yes then might be some application is conflicting with s2u2
try the latest version of s2u2 if you are not using it
THX, I was on the 1.37 version (an oldish one, I know), uninstalled it, the button now miraculously works, will try the 1.62 version and will give feedback.. thanks in advance.
Writing the feedback as promised, S2U2 seems like working fine, no bugs or anything, time will show..
THX again..
My X1 has had problems with it's Bluetooth cutting out during calls ever since I got it. Even after a replacement phone and the new R3A firmware the problem persists. So now I am going the custom route...
Can anyone recommend to me a custom ROM for the X1 that has had improvements to the Bluetooth implementation?
jhbodle said:
My X1 has had problems with it's Bluetooth cutting out during calls ever since I got it. Even after a replacement phone and the new R3A firmware the problem persists. So now I am going the custom route...
Can anyone recommend to me a custom ROM for the X1 that has had improvements to the Bluetooth implementation?
Click to expand...
Click to collapse
Never heard any cook do BT differently exept base on differenr WM built. I do patch the driver w/ HD one such that Cyberon VC over BT works. I never had bt cutting out during call but sometime AFTER the call (and it's a well known issue to all HTC device)
Perhaps it is worth to try other radio (you don't have to change rom, just update radio). I'm really not sure, but radio probably contains Bluetooth drivers too. Is that right?
netbat said:
Perhaps it is worth to try other radio (you don't have to change rom, just update radio). I'm really not sure, but radio probably contains Bluetooth drivers too. Is that right?
Click to expand...
Click to collapse
When flashing generic ROM you flash a corresponding radio (R3A with 1.14, R2A with 1.11 or 1.10). So this is probably no solution, but always worth a shot.
Diferent RADIOs are NOT the solution (I tried more than five radios).
I have tried more than 30 diferent ROMs in spanish and english, with WM6.1 and WM6.5, and no one go right with the Bluetooth.
I call Sony Ericson and they said that is normal because to save energy. It´s my first phones that disconect the bluetooth.
I've had all kinds of BT problems.
It usually turns of by itself, even in the middle of a call. (not so fun in the car, driving)
An I've also tried different ROM's and radios, no better.
BT is not very good on X1 I'm afraid... : (
mattiL said:
I've had all kinds of BT problems.
It usually turns of by itself, even in the middle of a call. (not so fun in the car, driving)
An I've also tried different ROM's and radios, no better.
BT is not very good on X1 I'm afraid... : (
Click to expand...
Click to collapse
Would you say that this problem affects all Windows Mobile devices? For example, if I get an HTC Touch Pro 2 am I going to have the same issues?
I have no idea really, I only have the Xperia.
Any htc owners here ?
jhbodle said:
Would you say that this problem affects all Windows Mobile devices? For example, if I get an HTC Touch Pro 2 am I going to have the same issues?
Click to expand...
Click to collapse
jhbodle said:
My X1 has had problems with it's Bluetooth cutting out during calls ever since I got it. Even after a replacement phone and the new R3A firmware the problem persists. So now I am going the custom route...
Click to expand...
Click to collapse
A friend and me, we both have the same problem as described by jhbodle since approx 6 months back.
During almost every call the sound is transferred back to the phone (as if I would have shut down the headset).
The weird thing is that bluetooth is still on and the headset is still treated as if it would be connected, meaning that I can still end the call by pressing the call button on the headset.
I can get the sound back to the headset (during the conversation) in two ways:
By choosing "Turn hands-free off" and then "Turn hands-free on" from the phone, or by shutting down the headset and then starting it again.
We have narrowed it down to that this happens whenever the phone disconnects from dataconnection (which seems to happen from time to time when using Activesync with Push - it disconnects and then directly reconnects). It does not matter if the phone is in 3G or GSM mode.
Have any of you noticed any similar problems during calls?
We are using the Swedish Telenor network. It might be possible that they have changed something that triggers the dataconnection to reset, and you on other networks are not beeing disconnected and therefore have not noticed this issue?
Maybe most of you are not using your dataconnections that heavely?
Those who are - could you test to disconnect the dataconnection while in call with TB headset..?
My friend have kept his phone with stock ROMs - he have had this problem with 3 or more different headsets.
I am flashoholic and have tried every ROM release from the top five cookers since the Hard SPL release for the Xperia. I have had the phone replaced once for a month ago - I have had this problem with both phones.
Hope you can help me to narrow this problem down even more, and most of all, I would like to know if we are alone with this problem..?
I have searched the forum for similar problems, but only found this one, so I did not want to create a new thread even if I it should be in the "General" category...
Oops... apparently I did not search enough - i have now found some other threads discussing this issue, but without any solutions.
I know that the most common BT issue for everybody is the BT deactivating itself after a call (I have had this from time to time aswell -especially after I have installed the MSVC software).
I don't want to start cross linking and dubbel posting, so I will wait and see if anybody has something to add to my previous post over here...
Would be nice to know if others, having this issue, can also link this to the dataconnection disconnecting.
How long are you talking on the phone for? I don't talk on mine for more than a few minutes, but occasionally I do get the 30+ minute calls that I have to deal with and I've never had blue tooth just shut off for no apparent reason.
For both me and a friend of mine, this happens during most calls regardless of the call duration (my calls usually take between 30sec and 10 minutes).
Sometimes, when I know that the conversation will take time, I reroute the sound back to the headset, but the same thing can happen again during the same call.
As I said, for me this happens whenever dataconnection disconnects on the phone.
Are you using dataconnection alot? Could you please try to disconnect the dataconnection during a call?
thanks