Hello everyone,
I performed an upgrade to WM5 on my Orange M2000 on Sunday (September 11th). By the way, I think WM5 is an awesome piece of OS. However, after getting everything to work, I can't seem to be able to configure MMS messenging.
GPRS and SMS work fine. But unlike WM 2003 second edition, MMS container doesn't come up when I go into messenging like SMS and Outlook and I'm not getting any option to configure it.
Does any know how I can get around this? MMS is an integral part of my Blue Angel. Please Help!!! :?:
WM5 - MMS Client Inside WORKING!
:wink:
Related
Recently bought a qtek 2020i. All (rf, blue, wifi, gprs, voice, ...) works fine. However, no MMS Composer soft is to be found on the device. When capturing photo, the MMS Send option directs me to an email interface.
Operator Proximus in Belgium cannot help me. Maybe, you guys/girls can.
Thanks in advance, and Regards,
I have friend who has the qtek 2020i and I have an XDAIIi. I have looked at my friends and his set-up is the same as mine. The Microsoft Standard Messaging interface is common for, text/email/mms. If you send a captured photo, messaging should open up in MMS mode. To manually create a message in directly from messaging. You'll see Accounts on the bottom page, tap and you can select from tex/email/mms, select mms and create your message. These do not come with any other MMS software as standard.
Also please find attached a cab file, for automatic installilation of Proximus GPRS/WAP/MMS which you copy to your qtek and tap to install. I know you said it is already installed, its just in case you may need it.
Got it. Thanks.
MMS ok now.
I have looked and looked nothing posted works. How do you get the freaking MMS to work on the underground WM 6 Rom?
this is what i have.
Cingular 8125 (on the cingular network)
Underground Rom
Arcsoft MMS 3.0.7.19
This is what i have done so far:
I have tried the Regwizard fix - ticking the mms always on
I have deleted all the MMS configure accounts and network settings and redone them.
I have reinstalled and tried different versions of MMS
So far i still get Error Synchronizing no matter what.
Anyone with Cingular get this to work on the Underground Rom?
I have the same issue as you..... I am still looking for a fix. Someone said they had to call Cingular to have them "reset" their MMS account and it fixed it.
eyeless said:
I have looked and looked nothing posted works. How do you get the freaking MMS to work on the underground WM 6 Rom?
this is what i have.
Cingular 8125 (on the cingular network)
Underground Rom
Arcsoft MMS 3.0.7.19
This is what i have done so far:
I have tried the Regwizard fix - ticking the mms always on
I have deleted all the MMS configure accounts and network settings and redone them.
I have reinstalled and tried different versions of MMS
So far i still get Error Synchronizing no matter what.
Anyone with Cingular get this to work on the Underground Rom?
Click to expand...
Click to collapse
Something i noticed that worked for me was to modify the settings of my mms server to use the MyISP connection which is my GPRS connection. worked like a charm
i am experiencing this error as well with TMO USA - i have tried everything and i still cannot get MMS working...
well i know you have to call to have them re-authorize you, but the error synching seems to be something else. I called and asked them to turn it back on and they did and it works fine on my razr just not my 8125 hmmmm it did connect once and said something about being barred
I have the same problem with tmobile USA
mine was too but fixed
eyeless said:
I have looked and looked nothing posted works. How do you get the freaking MMS to work on the underground WM 6 Rom?
this is what i have.
Cingular 8125 (on the cingular network)
Underground Rom
Arcsoft MMS 3.0.7.19
This is what i have done so far:
I have tried the Regwizard fix - ticking the mms always on
I have deleted all the MMS configure accounts and network settings and redone them.
I have reinstalled and tried different versions of MMS
So far i still get Error Synchronizing no matter what.
Anyone with Cingular get this to work on the Underground Rom?
Click to expand...
Click to collapse
I had to re input all my mms settings for cingular.. it comes with a defauld mms loaded so it will still give you an option to send mms.. however all the settings are gone.. you can easily find all the setup settings by google-ing cingular 8125 mms settings.. hope this helps ps.. running most beautiful rom
I saw this message with the Crossbow MBE (had to enter all settings manually), but the message cleared itself after I received a MMS.
MMS working fine over Most Beautiful ROM
Guys,
I switched off to this new ROM and my MMS is now working.
According to Molski, this version of MMS is newer and integrated to an OEM ROM. That's explain why we couldn't get the cab out of it.
Hope you all get a solution for the Underground. I really gave up!
I have reverted back to my XDA IIs whilst my Vario II is being repaired. I have managed to set up the GPRS connection and I am browsing the web without any issues. I cannot however access MMS.
Is there issues with MMS on this handset with T-Mobile? The helpdesk seemed to think that it required 'WAP 2'
Cheers
Aidan
install mms enable (however what type of rom do U have?)
Hi Nyuszi,
The ROM is the i-mate v1.40.00 WWE
Included with the ROM is MMS Composer Version 2.0.0.23
Would you recommend mms enable rather than this? Where will I find it?
Thanks
Aidan
well i tought U have a wm5 rom...so anyway i think you won't need it...all you have to do, is to set the parameters for mms...probably U would find it on your service providers homepage (cuz mms communicates on gprs...usually you have to set up a new connection profile and a modem at connections)
Aidan try to flash T-Mobile rom, and all T-Mobile settings are predefined in their roms
ive been into the site soo much and i bought me a tilt and the first night i lashed it with the Q-Mobile ROM.. I love the rom but for some odd problem.. i couldn't NEVER create,send nor receive a MMS message. i could see the settings screen for the composer but was not able to create send or receive one.. anyone could suggest any solutions.. i have no problem changing the MMS settings but the only way ive been able to create an MMS message was when i installed the MMS composer 5.0 but with that version i have had difficulty finding a config screen for the thing..lol
for anyone who uses t mobile with teh Q mobile ROM for the tilt and has MMS working correctly, PLEASE help me out.. i am really having problems.. everything works just fine.. or at leas recommend me a different rom that would work with the T Mobile US network?
Yes, just figured it out. Not sure if anyone else has ever got it working on the Kaiser but I just installed theses 2 CAB files from my ETEN M800 original PRE-INSTALL CABS because they were ones installed that had the MMS working on the M800 and bingo, it works on the Kaiser. Anyone interested in the CABS, let me know. I can send out for someone to host them. They dont seem to do anything else to my Kaiser but MAKE THE MMS WORK!
Raspster said:
Yes, just figured it out. Not sure if anyone else has ever got it working on the Kaiser but I just installed theses 2 CAB files from my ETEN M800 original PRE-INSTALL CABS because they were ones installed that had the MMS working on the M800 and bingo, it works on the Kaiser. Anyone interested in the CABS, let me know. I can send out for someone to host them. They dont seem to do anything else to my Kaiser but MAKE THE MMS WORK!
Click to expand...
Click to collapse
Just a couple of questions.
1.) which ROM are you using. WM6 or WM6.1
2.) What version of ArcSoft MMS are you using?
3.) Which Palm threaded SMS are you using as there are many variations out there.
ROM is WM6.0
Just uninstalled Arcsoft as it is now not needed.
Its the Palm threaded labeled WM6 version.
UPDATE - I just realized its the ETEN PHONE SERVICE 2.0 that enabled the MMS in the Palm threaded! I have not tested incoming MMS's but I was getting them on my M800 with this CAB installed. ****ty Sprint phone is my other service and they are blocking MMS's so I cant send with my other phone but I have been able to send thru the MMS in the Palm with zero problems!
Raspster said:
ROM is WM6.0
Just uninstalled Arcsoft as it is now not needed.
Its the Palm threaded labeled WM6 version.
Click to expand...
Click to collapse
Man I was hoping that you were going to say WM6.1
I have a .cab package that works w/ Arcsoft MMS 4.2.8.1 and Palm threaded SMS.
Well, I have WM 6.1 on my Glofiish M800 and the MMS in the Palm threaded is working no problem in that so I don't think WM 6.1 is any problem.
send the files here.. ill try it.. cuboosh[nospace]@[nospace]gmail.com thx.
This has always worked for me with MMS.
http://rapidshare.com/files/89233954/shogunmark_wm6_threaded.cab
I send/recieve MMS with the original mms prog and the SMS is taken care of by palm threaded...
SH4YD33 said:
This has always worked for me with MMS.
http://rapidshare.com/files/89233954/shogunmark_wm6_threaded.cab
I send/recieve MMS with the original mms prog and the SMS is taken care of by palm threaded...
Click to expand...
Click to collapse
hey
i've installed it now
and if i press the sms icon...it doesnt take me there..it goes to like either windowslive..outlook and such..no more sms? anyway to fix this??
TIA
SH4YD33 said:
This has always worked for me with MMS.
http://rapidshare.com/files/89233954/shogunmark_wm6_threaded.cab
I send/recieve MMS with the original mms prog and the SMS is taken care of by palm threaded...
Click to expand...
Click to collapse
i want to smack you.. this guy claims MMS is working from inside the palm app..no need for ARCsoft
That is correct. I will email you the file tonight to host it. Its a small cab that does not do anything elce that I can tell other than enable the MMS part of the palm threaded. Only problem I have is when I take a picture that is set to 3 megapix it does not scal the picture down to 300k or smaller. Is there a way to set something to send up to 600k...? A reg hack or change? I had to set my camera to 1 megapix to get the picture file to 300k or less. I know the treo 750 would auto crop down the picture but this is not working on other phones that have it. It also seems alot more stable than the ARCsoft MMS. I was getting every pic, voice, vcard that came thru 100%. I also installed the CAB to my friends 8525 and it works on that also. Looks like it works with any GSM phone ATM... Very nice find as I like the threaded in the palm version better than the one in WM6.1.
bapass, You gotta set it up to direct you to the palm threaded somehow. I thought when you install the palm threaded app, it automaticly sets that. Atleast for me it did. What version of the palm threaded are you using..? If you are using the HTC home plugin, the SMS on that will send you to the palm if its installed. Then you can do the REG edit to get rid of the ARCsoft or just un-install the CAB if you are using that version but since the TILT has the MMS out of the box attached to the SMS, it should get rid of it for you when you install, but this is different with every different version of the palm threaded out there. Mine is the one labeled WM6 PALM THREADED. Hope this helps.
cuboosh, you got mail.
ok, as raspster stated it actually works! now i need to find the regedit to disable arcsoft from taking the MMS before i fully uninstall it.. damn it i know it was on 4winmobile.com b4 but now i cant find it.. but yes i can verify i can send MMS from inside the palm app on my tilt!!!!!!!!!!!!!! CONGRATS MAN!
there is a reghack for 600k ill try to find it and reply back.
ok i tried regedit to 600k its not sticking.. but i have it sucessfully working both ways.. if you use exchange for email u can just disable arcsoft by making the following change..
edit the registry to rename HKLM/Software/MS/Inbox/SVC/MMS1 to MMS1OLD, Soft Reset.
now you dont have to uninstall it!
i am sucessfully sending/receiving MMS inside of the palm app using the cab file raspster posted and this regedit.
UPDATE!!! ive also figured out how to get it to auto re-size picture.. im currently testing it once i get it to work flawless ill post intrsuctions! its looking good so far though!
Thats great cuboosh!! I am so glad we got this working right! The palm threaded is by far the best I've seen for WM. Now it is finally complete! If you can get the re-sizing to work, we will be golden as then I can MMS the million PIC's I currently have that were taken at 3M. LOL
GREAT NEWS! it WORKS! fully 100% including picture resize! i will be posting the .zip file which contains the files/.reg files you need + instructions! and ill link to this thread once done
cuboosh said:
ok i tried regedit to 600k its not sticking.. but i have it sucessfully working both ways.. if you use exchange for email u can just disable arcsoft by making the following change..
edit the registry to rename HKLM/Software/MS/Inbox/SVC/MMS1 to MMS1OLD, Soft Reset.
now you dont have to uninstall it!
i am sucessfully sending/receiving MMS inside of the palm app using the cab file raspster posted and this regedit.
UPDATE!!! ive also figured out how to get it to auto re-size picture.. im currently testing it once i get it to work flawless ill post intrsuctions! its looking good so far though!
Click to expand...
Click to collapse
I have a Palm Treo 680, do you have anything that will allow me to recieve my pictures in regular size?
Charles P.