I recently bought k-jam, I used to have SPV M1000. I installed pocket controller to i mate , it doesn't work allright, has any body got experience about this tool?
Yes, it works great, but don't use the turbo mode => hard reset :?
pocket controller v5:2
It works very well in this version with K-JAM, and in skins as well
Related
Hi all,
i'm posting you freaks out there a new challenge.
I'm about to install an LCD screen on my car to watch videos and tv as well as pass some mp3 to the car stereo. Of course, i remembered that expensive gadget from XDA2, the backpack wich had a video out port. Now, that i have the XDA3, i was wondering if i could do something like that to pass the video from my pda to the LCD screen.
Any ideas ?
same here!!!!!
Anyone know if this option is available?
I have the Siemens SX66 and i want to do presentations via a vga connector either to a vga monitor or a projector.
here
http://www.margi.com/products/prod_ptg.htm
Re: here
cchris said:
http://www.margi.com/products/prod_ptg.htm
Click to expand...
Click to collapse
So- on their site they have a list of compatible devices:
Presenter-to-Go SD for Select Pocket PC Devices (27000-Series: 27001, 27002, 27003 )
Vendor Model
Dell Axim X3
Axim X3i
Axim X30
Samsung i700
ViewSonic V35 (Requires their SDIO upgrade)
V36
V37 (Requires their SDIO upgrade)
Axim x30 is a Blue Angel device (I think) so does this mean that it will be compatible withother angels such as my XDAIIs?
Hi all,
I was wondering, what options do I have, when it comes to GPS and my XDA. As I understand I need SD card, because maps take a lot of memory. So when do I stick the gps then ??
I found out that there are so called GPS mouses do they solve the trick? If so, which of them work on XDA? I couldn't found any
I appreciate any help
GPS
I bought Tom Tom Navigator 5 wired version. It comes with a SD card, a CD and the GPS device. I bought the extra connection cable at the PDA-shop in Rotterdam. I placed the SD card in the Wallaby, followed the instructions and it works fine. Unfortunately Tom Tom hasn't waterway maps.
Thanks a lot for the info. I have one question, what do you need the extra cable for?
I've checked tomtom.com, and it says it's only compatible with XDA 2 and up. Is that the reason I need the extra cable?
Thanks a lot, for the help.
Do the check again (see www.tomtom.nl) and you'll find:
TomTom NAVIGATOR 5 – Wired GPS - Compatibility:
Dell Axim X3 , Axim X30 , Axim X5
HP iPAQ H2210 , iPAQ H2215 , iPAQ H3970 , iPAQ H4150 , iPAQ H4350 , iPAQ H5455 , iPAQ H5550 , iPAQ H5555 , IPAQ HX2110 , IPAQ HX2410 , iPAQ HX4700 , iPAQ RX3715 , iPAQ RZ1710
O2 XDA , XDA II , XDA IIi , XDA IIS
Orange SPV M1000
Qtek 9090
T-Mobile MDA II , MDA III
Toshiba E-400
The extra cable is needed for the connection of the GPS device to the necessary 12V DC supply
XDA ------------>|
12 V Supply -->|
GPS ------------>|
It won't work without the extra connection for 12 V DC. (Information from the PDA Shop where I bougt the system. )
i believe that you have to use a wired GPS on the XDA 1, as the SD slot is not a true SDIO slot. Thus SD based GPS receivers will not work with the xda 1
Regards
Chris
Thanks a lot guys for all your help. I really appreciate it.
Anyone got this to work with the Kaiser? I have a T-Mobile UK Vario III with stock 6.0 ROM and I recently managed to get a gamepad on eBay however despite using several different versions of drivers including the latest (v1.52 from smartgamepad.com) I am unable to connect and get the error message "Connection Error, we don't support this Bluetooth Gamepad". I tried on my WM5 Vario instead and I get the same message although the desktop drivers work fine so the pad itself works. I can pair it with ok too but this achieves nothing, any got any drivers that do work on the Kaiser? Thanks, Paul.
Bump! Anyone?
I recently bought a second hand HTC Universal (either an 02 or Tmobile branded, case says one thing, fw says another) as I couldn't afford an HTC Ultimate (the ones with nvidia gpu).
Anyways, upon trying to use my Targus Universal Wireless Keyboard with the Universal, it didn't work, but it worked fine with my Sony PSP (through homebrew software).
I was using a driver downloaded from a driver storage site (can't remember which one). I read somewhere after a bit of research that the keyboard wouldn't work on pocket pc 2003SE (as opposed to plain 2003).
Is there anybody else with this keyboard? Have you found a driver that will run on windows mobile 6.1 pro (a lovely cooked ROM from here on xda-dev)? Is there any generic IR keyboard driver avaliable which might be configured to use this keyboard?
Hello,
I have smart bluetooth keyboard KB600 (about four years old) and I'm looking for driver for my HD2, any idea?
Thank you.
did you try pairing it directly without a bt driver?
Pairing HD2 and bluetooth keyboard
I am trying to pair the same device: My HD2 finds the keyboard, and is able to connect via SPP slave. But I am not able to type anything? ... anybody? I am using a COM2 port for the connection, and the HD2 is "always visible", I have no clue why it's not responding! ANY help is appreciated
Same problem here............ PLEEase help
HTC HD2 and BK600 COM ONE/OMIZ/FREEDOM bt keyboard issue
Hi,
first, accept apologies, because i repost a message posted in the wrong thread (same problem, but not same phone)
Home \ HTC Diamond: Touch Diamond, MDA Compact IV \ Touch Diamond, MDA Compact IV Accessories \ Bluetooth Keyboard BK600 problem
anyway, they explain that my com one bk600 is the same than omiz and freedom KB600. So, i've tested 2 drivers
1) Installing omiz one, it proposes me several choices (my model is not in it), but i've used to have this installer (older version) work for my old acer n50 and my pharos. I guess i've to choose a model with arm and widcomm bt.
No success, it seems that the software installed, but the application claims it's not a valid ppc applicaiton (strange because it worked one time and fails saying that there is not enough memory when clicking activate)
2) i've tested the freedom universal keyboard (second choice)
The driver installs perfectly; on the htc hd2 side i've paired the devica and grant connexions (the wizard report that the device is connected and the keyboard double green blink -- thats mean it's ok ) , but when i go to program files freedom utility and start it and click on connect, it claim that the device is not paired.
here where i'm. To bad, because having it works onACER n50 and HTC pharos.
Quoting another user, to pay $80 for 3 years lifetime...
Any ideas ???
Best regards,
Ludovic.
got the same problem. (BK600 and HD2)
Any success yet?
got the same problem here. i tried many drivers i found on the internet, none worked for me
next step is: i try to find a universal driver that can select a com-port manually to link with the bluetooth comport. maybe some infrareddriver can do this, because infrared also uses com-ports.
the problem is, the drivers are for microsoft bluetooth stacks and i.e. a hd2 uses broadcom as far as i know.
i hope anyone can find a solution
SPP keyboards do not work for WM builds 6 and over. This problem has existed for years and no one has found a solution.
I suggest you ditch the SPP keyboard and go with one that supports a HID profile.
Hi guys,
I had the BK600 keyboard and found these drivers to work:
It installs the proper program and works only through the programs. Do not bother trying to pair it with WM settings.
This also works on Symbian. I attached the files for you to test.
I am wondering whether there is an Android version that I can use with my HD2?
I was able to get the freedom BK600 keyboard working succesfully with my old windows mobile 6.1 Treo 800w phone. I found your WinCE.zip (30.0 KB) driver worked best with windows mobile 6.1. It places an executable called BTKeybd under the programs menu.
For Android users, please use Key Pro by Mobile Gears. It is the only SPP bluetooth enabled app that I can find. Works perfectly with my Android.