Related
Hi,
Thanks to the very clever people over at www.imei-check.co.uk I now have an unlocked T-Mobile Vario.
http://www.imei-check.co.uk/m3000unlock.php
I now wish to know if I can flash my unlocked Wizard with an Imate K-Jam2 flash?
I know there is another post on flashing the the Qtek 9100 with the K-Jam but I dont know if the T-Mobile Vario will pose any different issues or problems.
What I want to know is :-
1) Can it be done, can I flash my T-Mobile Vario with a K-Jam2 ROM?
2) How do I make a backup of my T-Mobile ROM before taking the plunge?
I am a Sony Ericsson P900 convert so please be gentle with me on your responses. I'm no expert but have got this far (Unlocked) by reading these and other forums.
If any of you can help out I would be most gratefull.
Cheers
Lee
I have (had) a Vario from T-Mobile Netherlands. I unlocked like you and ran the ROM upgrade utility for Qtek 9100, available for download on :-
http://www.beyondthetech.com/blogs/kjam/
It works fine. My Dutch phone now talks to me in English.... phew!
@belgilux
What are the advanges of the qtek rom over the vario ??
Niets dat ik kan bespeuren. Enkel is ding dat zijn in WWE - wereld Wijde Engels - dit is good voor mij aangezien mijn Nederlands niet zo goed is. ..
ok thanks ,
mijn nederlands is goed , dus hou hem liever in nederlands
grtx, arnold
Hey, guys, I have the same problem - I want to change the OS from a german to en english one. My device is the XDA Mini S from O2 Germany. Do I *really* need to pay for unlocking first or I can just flash it?
P.S. How did you back up the ROM before the flashing?
hello ingenious ,
as far as i know , you have to unlock it first otherwise you can't acces the bootloader.
buckup of your old rom can be done (only after unlocking).
you need the program romupdate.exe
disable activesync on usb connection
turn off phone
connect usb cable while pressing camera button
start romupdate
chooice usb connection
enter 'r2sd all' this coppies your phone rom to your sd card (sd card will be erased !!!!!)
next step is to dump the sd card to file to store.
you need ntrw.exe and sd card reader
in a dos box in a dir with ntrw enter 'ntrw read dump.nb1 drive_letter_of_reader:'
that will dump you entire sd card to file.
to restore , but it back with ntrw write .......
reset phone while holding voice an camera button and chooise restore from sd card.
good luck , arnold
p.s. i'm wrinting this out of my memory so forgive me if i have something wrong.
Hey, thanks very much
Just a thing bothers me still... If I unlock the phone (i.e. replace the boot loader) won't I just lose my warranty from O2?
mhh that doesn't worry me to much,
officiali it will only void your warrnaty if they can proof that that is the problem.
if not they can not hold it against you (in holland that is) , but you may have to 'fight' for your warranty.
grtx , arnold
run the ROM upgrade utility for Qtek 9100
hi guys,
i wanna ask a questions about run the ROM upgrade from utility for Qtek 9100.
my pda-phone is mda vario, is it possible if i did it without unlock my phone?
because i tried run the ROM upgrade utility for Qtek 9100, but it said that there is an error with my phone while in process. but in that case, i haven't unlocked my phone.
anyone can help me, please
thank u...
reset phone while holding voice an comm.manger button and chooise restore from sd card.
Click to expand...
Click to collapse
but he boot NOT from the sd card ... where is the trick ?
regards
I have successfully replaced the ROM on my MDA Vario with a K-Jam ROM and now I want to go back to the original ROM. Following the instructions by arnoldl earlier in this thread I created a backup dump.nb1 file and used ntrw_189.exe in a CMD window to dump this to a file. This took bloomin' ages since I have a 1GB card - very tiresome!
Anyway, I have now reversed that process to copy the dump file back to the mini-SD card but when I hard reset my Vario I do not get a prompt to restore from the SD card. I only have options to restore to original settings or cancel.
I have allowed a hard reset to complete and the mini-SD card does not even register in the Vario. Removing and reinserting does nothing. I've tried a hard reset twice and still no joy.
Assuming I have successfully created a working ROM image on my mini-SD card are there any other tips or options for restoring it to the Vario ROM?
anyone knows the keys to press for restore an image from sd card ?
I have tried all combinatiosn of keys, but nothing are working
regards
sorry , it is hold camera and voice comm button while resetting.
previes state must be on!!
grtx arnold
Thanks for that. I just realised it says hold camera and voice comm rather than comms and voice comm, like you would normally do for a hard reset.
I've tried a boot with the correct buttons and could see nothing at all on the screen. I now realise there is something but without a backlight it is nigh on impossible to see. Anyway, I spotted that too late and started button mashing to try to get the thing to spring into life. It is now staring at me with a big clear white (lit) screen that dims briefly periodically. I now have no idea what is going on and whether this is the correct behaviour or not.
How long should the reflash take? Will having a 1GB card mean it takes 8 times as long as a 128MB card as it has to read the whole thing? How do I know if this is working OK?There are no progress bars or anything - just a plain white screen.
i did say comm and voice , but i just changed that
reflash was prety fast when i did it , within a minute i thought (256mb)
Oh dear :-( Mine's been blinking at me for 15 minutes now.
I just restarted the process and I managed to see a "Format BinFS Success" message and a progress bar at the bottom which I think said "Upload OS" or something like that - too difficult to read properly in today's miserable grey daylight. But I'm now staring at the plain white screen once more.
Maybe my ROM image is fried. Any ideas how to get hold of a clean T-Mobile UK MDA Vario ROM file?
EDIT : Further info......
Bored of the blank white screen I pressed the reset button on its own. The device reset and this time with the benefit of the backlight being on I could see the Format BinFS success message, a couple of checksum checks and something about downloading ROM and extended ROM. This all took only a minute or two, which seems positive. But then I saw a message about formatting FAT (or FAT32?) and while that was being displayed the screen faded/disolved to plain white and has resumed its periodic dimming.
Unfortunately I now have HTC Innovation and imate branding all over the thing so I can't just pop it back to T-Mobile to fix it. I wish they had a full ROM upgrade/replace image in a .exe, like qtek and imate.
hello,
what means "previes state must be on!! "
i have an 512 mb card and no chance to boot the sd. Has anyone
try the qtek german bin on the xda ftp server here ? i write this
image via ntrw on my 512 mb card, press the camera and voice button and also reset, but the sd card want recognize ...
help! I want this german qtek rom on my wizard.
regards
greddy said:
hello,
what means "previes state must be on!! "
Click to expand...
Click to collapse
i only got in this mode when resetting with the buttons pressed when phone was on.
when i first shut it down and then reset it didn't work.
grtx
Having left the white screen for a couple of hours there is no sign of anything useful happening. I reset the device and now I am dumped directly to the bootloader screen - there seems to be no software on the device now.
So it appears I can only get this thing up and running again with the k-jam ROM (or presumably Qtek) by running the .exe ROM upgrade file. But for me my option to go back to native Vario software seems to have vanished forever. Maybe I'm just really unlucky but this might serve as a warning/caution for others who want to flash their Vario.
Hi everyone,
I don't know if this is possible (have been reading most post in this section) but is it possible to do a romupdate from the mini SD card?
I know on my old ipaq this could be done. but I have now idea how to do this on my m3000. I would like to update to the latest Qtek rom.
So far I have the romupdate setup file, but that's just about it. since I dont have my usb cable I would like to know if there is any other way to do the update..
all suggestions are welcome
Nghia
What device do you have?
Is it a UK MDA Vario version of the K-Jam?
it's a Dutch Orange M3000 device which I would like to upgrade with the latest qtek rom or I-Mate rom, depends on which one is better (WWE or Dutch, doesn't really matter to me).
Do you mean backing up your rom on to sd?
If so yes you can. Bear in mind try uise a samll sd card as rom will be size of your card.
Next thing if you wnat to update rom with out backing up.
Run lozwiz, again, but this time run unlock your CID tool.
Then you can just the exe rom updtae with out any vendoe code issues.
Hi,
Is it possible to upgrade my Qtek 9100 without using an USB cable but a SD card. The reason is that my mini USB connection on the Qtek is broken. So I can't connect the Qtek with my computer.
If it is possible to upgrade with a SD card can anybody tell me how.
I havn't heard of doing it this way in a while. My old T-Mobile Pocket PC Phone Edition. "Space Needle" used to be flashed this way. You would load the Rom onto the SD card and use some type of key combination at boot to load the rom... I'm not sure that it exists with this rom and hardware...
can be done, I do it on my spare wizard that also as a broken usb socket, however you must first have a memorycard with a rom image first.
ratcom said:
can be done, I do it on my spare wizard that also as a broken usb socket, however you must first have a memorycard with a rom image first.
Click to expand...
Click to collapse
Is it possible to make a rom image on a SDcard out of the the ROM's availiable om this forum? And how can this be done.
ratcom said:
can be done, I do it on my spare wizard that also as a broken usb socket, however you must first have a memorycard with a rom image first.
Click to expand...
Click to collapse
would you please tell breifly how can we have rom image on sdcard ????
To restore from an SD image, your wizard has to be CID unlocked first or else it won't update.
yes i have cid unlocked imate kjam
clemsyn said:
To restore from an SD image, your wizard has to be CID unlocked first or else it won't update.
Click to expand...
Click to collapse
I have CID unlocked my phone so that's no problem. But how do I upgrade with a SDcard and how to make an image on a SD card.
Who can help.
put your phone in bootloader mode (make sure you have minisd in the slot)...disable activesync on your computer by stopping wcecomm process...then plug in the phone (while it's in bootloader)..then run romupdate_115.exe (look for it in the xda ftp). Then choose the usb connection (I think it's wcusb or something)..press enter..cmd> should appear...then type r2sd all (this will backup everything in the phone to the minisdwhen it completes).
Then when you put it in the phone you want to upgrade..put that minisd in the phone you want to upgrade and put that phone in bootloader. It will ask you if you want to update and press the voice command button to upgrade. Goodluck!
Can I make an image of a romupdate availiable in the xda ftp on a SDcard and upgrade my phone without connecting it to the computer.
sanderjohan said:
Can I make an image of a romupdate availiable in the xda ftp on a SDcard and upgrade my phone without connecting it to the computer.
Click to expand...
Click to collapse
Not as far as I know my friend ..... sorry
sanderjohan said:
Can I make an image of a romupdate availiable in the xda ftp on a SDcard and upgrade my phone without connecting it to the computer.
Click to expand...
Click to collapse
If needed, PM Me and you can send me a MiniSD card to load a rom onto for you. and I'll ship it back. Let me know which rom you want loaded, and I will do it for you.
Actually somebody with an CID unlocked wizard can create an SD image and then upload it to the website for you to upload and use but it will definitely wipe out the data on their SD.
I'm in the same boat. My miniUSB port fell in. I need to get the t-mobile ROM back onto the phone so I have a chance of repair. If anyone could upload a ROM onto the forum that will let me update using a miniSD card I’d be very grateful.
At least I’m not the only one who's USB port has broke!
I have teh stock tmo ROM on a 128 MB miniSD. Doubt that would help, but if someone needs it...just tell me how to get the image off and I'll post it.
bittermormon said:
I have teh stock tmo ROM on a 128 MB miniSD. Doubt that would help, but if someone needs it...just tell me how to get the image off and I'll post it.
Click to expand...
Click to collapse
Assuming /dev/sda is the device pointing to your SD card reader, and /tmp/sd.img is the sd card image file, in Linux you can extract it with this command:
Code:
dd if=/dev/sda of=/tmp/sd.img
And you can write it back on another SD card with this command:
Code:
dd if=/tmp/sd.img of=/dev/sda
in Windows you can use psdread.exe and psdwrite.exe, see the wiki for instructions:
http://wiki.xda-developers.com/index.php?pagename=XdaUtils/psdread.exe
http://wiki.xda-developers.com/index.php?pagename=XdaUtils/psdwrite.exe
If anyone makes an Original SD ROM of tmobile...Please upload it at ftp. It would help lots of people here in the forum..
Upload of stock TMobile Rom to SD card
bittermormon said:
I have teh stock tmo ROM on a 128 MB miniSD. Doubt that would help, but if someone needs it...just tell me how to get the image off and I'll post it.
Click to expand...
Click to collapse
I looked on the FTP and did not see this, so if anyone has it let me know. My mini USB fell in as well seems to happen alot. I have 7 days..... (Sounds like The Ring)
peraltah said:
I looked on the FTP and did not see this, so if anyone has it let me know. My mini USB fell in as well seems to happen alot. I have 7 days..... (Sounds like The Ring)
Click to expand...
Click to collapse
My file isn't from teh FTP, its from my phone. I made a b/u before I installed X's rom on day 3 of my MDA ownership. Like I said, I think there's a way to pull the image off the card, but I'm not going to spend my time looking. If some one wants to find me instructions as well as links to programs needed, I'd be glad to post the image.
Restoring Tmobile USA Rom from SD card
Thats for all the info folks it worked perfectly and I will not have to cough up any money for me voiding the warrenty!!
I'd love to flash the latest DOPOD ROM onto my trinity, I'd love to play around sticking new and funky ROMs onto it, but I have one big problem...
I can't extract the current ROM from it, I can't find it for download anywhere, so if something DOES go wrong, I can't re-flash the original ROM back onto the device to send it back to Orange
So unless some Orange user has managed to extract the UK Orange ROM from it, I'm going to have to live with what I have
I believe there is little risk in flashing with the new dopod rom, your phone keeps 3 sections for memory wich is basically:
NOW:
1.Ram memory
2.Storage memory (Orange rom)
3.Backup memory (Backup Orange Rom)
AFTER FLASHING:
1.Ram memory
2.Storage memory (Dopod rom)
3.Backup memory (Backup Orange Rom)
The new rom will only write to storage memory while the orange rom you origionally had will stay in the backup storage. (unless you use an 'extended' rom, this will clear your 'backup' memory and make it 'storage' memory and remove the orange version)
So if you have huge problems with the dopod rom you just have to follow the hard reset instructions in the spv manual. ( press the two buttons above the 'send' and 'cancel' (red/green) keys and push the reset button next to the usb port with your stylus) This will reload the Orange rom from the 'backup memory' and restore your phone to its origional state.
Ive just flased my SPV M700 to the new rom and everything seems to be fine bar the gprs/edge settings.
See this site for a breif walkthrough:
http://www.pocketpcmag.com/blogs/in...the_now_gps_enabled_htc&tb=1&pb=1&disp=single
funk
(as usual if anything goes drastically wrong neither i nor xda are responsible )
funkus said:
I believe there is little risk in flashing with the new dopod rom, your phone keeps 3 sections for memory wich is basically:
1.Ram memory
2.Storage memory (Dopod rom)
3.Backup memory (Orange Rom)
The new rom will only write to storage memory while the orange rom you origionally had will stay in the backup storage. (unless you use an 'extended' rom, wich will clear your 'backup' storage and remover the orange version)
So if you have huge problems with the dopod rom you just have to follow the hard reset instructions in the spv manual. ( press the two buttons above the 'send' and 'cancel' (red/green) keys and push the reset button next to the usb port with your stylus)
Ive just flased my SPV M700 to the new rom and everything seems to be fine bar the gprs/edge settings.
See this site for a breif walkthrough:
http://www.pocketpcmag.com/blogs/in...the_now_gps_enabled_htc&tb=1&pb=1&disp=single
funk
(as usual if anything goes drastically wrong neither i nor xda are responsible )
Click to expand...
Click to collapse
I've just flashed my SPV M700 with the latest Dopod ROM and it works just fine, give it a try.
Alan
For some reason when i hard reset the device it doesnt flash back to the orange rom.
Obviously this is weird so, for now, DISREGARD MY PREVIOUS POST!!!
With the HTC CHarmer a rom could be restored via hard reset but im unsure why the HTC Trinity isnt restoring. So if your worried hold off till this has been sorted.
Has anyone ever restored the factory rom on a trinity yet?
Looks like I'll be waiting then
I have complete confidence in the new DOPOD rom, I just want to be able to go back to the Orange one in case it needs to go back, thats all.
It's a bit annoying that the bootloader on the Trinity doesnt let you backup the ROM, not sure why they disabled that feature.
There must be some way to backup the original ROM so I can reflash if there's a problem, just nobody seems to be able to suggest anything, sigh
OK
I've dumped the ROM from my M700 got part00.raw, part01.raw and part02.raw.
The rest, making it into a flashably ROM, is way above my head, if someone can do the rest, I'll send the files across.
any progress on that flashable rom Antimus?
Take a look here http://forum.xda-developers.com/showthread.php?t=308152
I had a similar problem. My second Trini (Orange SPV from France) died during OS module transfer. In my case the reason was a faulty mini-SD inserted into the PDA. Should this be your case, remove the mini SD card and re-flash.
Your case of a partial flashing stinks similar to mine.
In my case, using Olipro's Custom RUU updater, I could flash individual modules of the ROM (obtaining no error but getting no actual results in the Trini), except the OS, for which the screen faded off and the Trini hanged.
This happened the same way with any ROM (WWE, Spanish, WM6...).
Using MTTY (supported by POF - very known guy of this forum), we obtained hundreds of errors.
Just removed the SD, re-flashed and the French SPV opened its ears to life as a pure Spanish GPS-enabled HTC P3600.
Cannot offer any help beyond that.
I was mistakenly copy the wrong rom into the SD card and run the cheetah unlocker - it starts to flash the rom. After that the TREO750 is dead and soft & hard reset will not help.
I can only go into the bootloader with 3 color screen. Pressing PTT and reset button.
Anything i can do to make this TREO750 work again ?
ojtan said:
I was mistakenly copy the wrong rom into the SD card and run the cheetah unlocker - it starts to flash the rom. After that the TREO750 is dead and soft & hard reset will not help.
I can only go into the bootloader with 3 color screen. Pressing PTT and reset button.
Anything i can do to make this TREO750 work again ?
Click to expand...
Click to collapse
If you can access the tri-color bootloader screen, then your Treo 750 is NOT dead.
The ROM is bad or wiped but the bootloader is good...that is sufficient for you to flash a good ROM & get it up & running.
What do you see on the bootloader screen?
Which ROM did you copy into the mini-SD card?
You could copy the .nbh file from the original WM6 ROM Upgrade package & change it to CHEEIMG.nbh into a freshly formatted (FAT32) mini-SD card & flash using the mini-SD card method.
thanks konker. I finally figure out the way to flash it with original ROM.
ojtan said:
thanks konker. I finally figure out the way to flash it with original ROM.
Click to expand...
Click to collapse
Great! I'm glad you got your phone working again.
glad to know its working again
Hi everyone,
I have a big problem and I need urgent help please. I have ATT 750 unlocked and I'm outside the States now. My Treo was 6.0 then I upgrade it to 6.1 so far so good.
Then I saw a custom rom that I thought it was interesting. the custom rom was for HTC Dimond I think. without paying too much attention. I started the upgrade. It went 70% before the upgrade crashed.
Now my Treo is not responding to anything. I have the original ATT 6.0 SD upgrade and I have the 6.1 lite upgrade. I'm using CheetahUnlocker to flash the SPL (that is working) but when I try to install the 6.0 or 6.1 using Kaiser Custom RUU v1 it crash.
I saw the post above that suggest to place the original 6.0 on a freshly formated SD and install from there. that is not working either. when I try to install the software it goes into these steps before it crashes: btw, I have the tri-color bar and it has the following info:
CHEE100
IPL-0.20
SPL-1.40.01iNex
while update in progress i see the following:
CHEEIMG.nbh
SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - Fail
OS -
After the crash I get this msg: "Update Terminate Update Failed"
Any suggestion please? need more info? then let me know
Thanks in advance
Sam
Any answer
Hello Sam,
I actually had the same problem, did you get it fixed?
Please let me know, how?
Thanks a lot
Same problem here
In the 3 colored screen just displays this.
Palm Tr
IPL-0.20
Palm Tr
SPL-0.21.0000
When i insert the freshly Fat32 formatted SD card with the rom , apears "loading" for about 2 seconds and then just ends with the tricolored display.
Thanks for any advice.
Apoapo said:
Same problem here
In the 3 colored screen just displays this.
Palm Tr
IPL-0.20
Palm Tr
SPL-0.21.0000
When i insert the freshly Fat32 formatted SD card with the rom , apears "loading" for about 2 seconds and then just ends with the tricolored display.
Thanks for any advice.
Click to expand...
Click to collapse
You need to run Hard SPL first before flashing any ROM.
Your display would look like safisam's if you had run Hard SPL. (SPL-1.40.01iNex)
safisam said:
Hi everyone,
I have a big problem and I need urgent help please. I have ATT 750 unlocked and I'm outside the States now. My Treo was 6.0 then I upgrade it to 6.1 so far so good.
Then I saw a custom rom that I thought it was interesting. the custom rom was for HTC Dimond I think. without paying too much attention. I started the upgrade. It went 70% before the upgrade crashed.
Now my Treo is not responding to anything. I have the original ATT 6.0 SD upgrade and I have the 6.1 lite upgrade. I'm using CheetahUnlocker to flash the SPL (that is working) but when I try to install the 6.0 or 6.1 using Kaiser Custom RUU v1 it crash.
I saw the post above that suggest to place the original 6.0 on a freshly formated SD and install from there. that is not working either. when I try to install the software it goes into these steps before it crashes: btw, I have the tri-color bar and it has the following info:
CHEE100
IPL-0.20
SPL-1.40.01iNex
while update in progress i see the following:
CHEEIMG.nbh
SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - Fail
OS -
After the crash I get this msg: "Update Terminate Update Failed"
Any suggestion please? need more info? then let me know
Thanks in advance
Sam
Click to expand...
Click to collapse
Have you tried re-downloading the ROM in case you have a bad file? Also, have you tried a different SD card, or re-formatting the SD card you are using? Sometimes that will help, and make sure the CHEIMG file is the only file on the SD card.
startngate said:
You need to run Hard SPL first before flashing any ROM.
Your display would look like safisam's if you had run Hard SPL. (SPL-1.40.01iNex)
Click to expand...
Click to collapse
Thanks man, i was looking for any way to HARD SPL directly from the older loader, i couldn't find any.
But i already solved loading in the SD card an "original" ROM from palm.
Now i got this treo working again
Hi all
I have the same problem, after some progress during the update it stops and now I can see just the Palm logo inicialyzing...
I stil can get the Bootloader Screen (3 collors), but when I try to pass other ROM It says "file image corrupted"...
I´ve been trying with 4 SD card that I have (512Mbs up to 2Giga), but nothing works...
It seems that the Treo doesn´t recognize the SD card!!!!
How could I Pass a ROM not using the SD card??
Any help??
Palm treo 750 storage memory problem after flashing!Please help
Please help me!!!!!!!I have occurred this problem in my Palm treo 750 after flashing:i get this
message error:"Storage memory is critically low.i the storage momory is not increased. other
programs may not be able to star.Use file explorer to delete files that are no longer needed or
move some files to strage card".
And when i look the memory storge i see only:
-4.82 MB(Tatal memory storage)
-2.3MB in use and
1.78MB free
And like you know the real total memory storage is: 60MB.
Please help me!!!!!!It happen after i update it to Wm6.1
And hard reset, soft reset don't help.Help please!!!!!!!!
darabah said:
Please help me!!!!!!!I have occurred this problem in my Palm treo 750 after flashing:i get this
message error:"Storage memory is critically low.i the storage momory is not increased. other
programs may not be able to star.Use file explorer to delete files that are no longer needed or
move some files to strage card".
And when i look the memory storge i see only:
-4.82 MB(Tatal memory storage)
-2.3MB in use and
1.78MB free
And like you know the real total memory storage is: 60MB.
Please help me!!!!!!It happen after i update it to Wm6.1
And hard reset, soft reset don't help.Help please!!!!!!!!
Click to expand...
Click to collapse
First of all, please indicate which ROM you loaded on your device.
Secondly, it would help the community to help you if you could state what software modifications you've performed on the phone. eg. HardSPL etc
Lastly, a list of installed software on your phone would be useful too.
Palm treo 750 storage memory problem after flashing!Please help
I had windows mobile6 Treo 750 2.27 ce os 5.2.1239(build 17746.0.2.4) original and i update to 6.1 Treo750_OS5_2_19199WWE_STD.rar. i used CheetahUnlocker, MAGIC_UNLOCKER and Treo750v_ExtROM_Unlockers with SD method
Like it descripted to the forum.
Plaese help me! Thank you for your reply!!!!!
darabah said:
I had windows mobile6 Treo 750 2.27 ce os 5.2.1239(build 17746.0.2.4) original and i update to 6.1 Treo750_OS5_2_19199WWE_STD.rar. i used CheetahUnlocker, MAGIC_UNLOCKER and Treo750v_ExtROM_Unlockers with SD method
Like it descripted to the forum.
Plaese help me! Thank you for your reply!!!!!
Click to expand...
Click to collapse
From your description, it seems both of them are original stock ROM. Is your Treo a telco branded model or a unbranded unlocked model?
If the latter, you did not have to run the other utilities to unlock the phone...just flash the ROM.
I see that you ran the ExtROM unlocker...why did you have to do that?
The ExtROM is used to store device specific ROM customization that you should not have to bother too much if your ROM is a unbranded ROM (ie. not AT&T ROM etc).
If you left the ExtROM in it's unhidden state, that could be why the system is reporting the amount of free space to be so low. You should hide the ExtROM & then hard-reset the device again to see if that solves the problem.
Palm treo 750 storage memory problem after flashing!Please help
Thank u for your reply!
My Treo is unlocked model but i don't know if it is unbranded and it is from Palm Rom not AT&T ROM.
I'm news, can u tell me how to hide the ExtROM(Can u explain how to proced please?).
Thant u for all!!!!!