Want to upgrade radio rom - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Hi,
Is it possible to upgrade radio rom and leave other parts untouched?
I have trouble with 01.01.10 radio, GPRS gets stuck often. I want to flash 01.04.10.

I'm to, please

I've already tried 1.9.10 radio from norwegian ROM, - it was useless... I still can't start GPRS without SR .
What can we do with MTS... :?

With norwegian ROM? Soft reset? Fu... MTS! :evil:

I'm not sure it's MTS' fault. My previous Qtek 9090 with the newest radio rom worked fine.
I was told that 01.04.10 has no such problem so I want to try it but cannot find a way.

Vishni: Sure it's not MTS fault, but why I have no problem with other two: Beeline and Megafon :roll: ?
Russian ROM has 1.4.10 radio. If you want it I can upload ntrw dump, but it is 128 Mb...

Button said:
Vishni: Sure it's not MTS fault, but why I have no problem with other two: Beeline and Megafon :roll: ?
Russian ROM has 1.4.10 radio. If you want it I can upload ntrw dump, but it is 128 Mb...
Click to expand...
Click to collapse
Hm-m... I have Russian ROM too but radio is 01.01.10.
1. What is the OS rom version in your Russian ROM? 1.3.9.4 RUS?
2. 1.4.10 radio has GPRS trouble too using MTS, hasn't it?

I have a Jasjar, which was running:
ROM version 1.13.53 WWE
Radio version 1.03.01
ExtROM version 1.13.137 WWE
I ran the radio-only upgrade, which errored the first time but ran without problem the second time. After a soft reset, I now have:
ROM version 1.13.53 WWE
Radio version 1.04.02
ExtROM version 1.13.137 WWE
All my settings/hacks were retained and no information was lost. The radio appears to be stable.

Sorry - wrong forum

My Wizard has no problem at all.
With radio rom 01.12.10

garywizard said:
My Wizard has no problem at all.
With radio rom 01.12.10
Click to expand...
Click to collapse
Where did you got the updated ROM from ?
Arnon

i bought my wizard last week and the rom version is already the latest one.
i didnt update the rom.

ssn04 said:
I have a Jasjar, which was running:
ROM version 1.13.53 WWE
Radio version 1.03.01
ExtROM version 1.13.137 WWE
I ran the radio-only upgrade, which errored the first time but ran without problem the second time. After a soft reset, I now have:
ROM version 1.13.53 WWE
Radio version 1.04.02
ExtROM version 1.13.137 WWE
All my settings/hacks were retained and no information was lost. The radio appears to be stable.
Click to expand...
Click to collapse
Hi ssn04!
Can You post your radio-only upgrade, please.
Tnx.

I visited Russian qtek forum and I've found the problem is on Wizard+MTS network, radio version doesn't matter.
To repeat the problem just make a call, after that you cannot download any byte until SR.
I hope 01.12.10 would help...

vishny said:
I hope 01.12.10 would help...
Click to expand...
Click to collapse
Ïðîøèëñÿ. Íåò, ïîõîæå, ÷òî íå ïîìîãàåò
Òàê ÷òî æä¸ì äàëüøå, ïîêà ÌÒÑ íàñòðîèò-òàêè ñâî¸ æåëåçî...

I've tried. 01.12.10 didn't help

vishny said:
I've tried. 01.12.10 didn't help
Click to expand...
Click to collapse
I don't think your problem is the radio but the OS. I was having GPRS issues until I upgrade the OS to 1.6.7.1 Rom. Since then I have not had any issues.

rkorzuch said:
vishny said:
I've tried. 01.12.10 didn't help
Click to expand...
Click to collapse
I don't think your problem is the radio but the OS. I was having GPRS issues until I upgrade the OS to 1.6.7.1 Rom. Since then I have not had any issues.
Click to expand...
Click to collapse
What kind of issue you were having? I cannot download anything via GPRS connection after any voice call untill softreset.

vishny said:
What kind of issue you were having? I cannot download anything via GPRS connection after any voice call untill softreset.
Click to expand...
Click to collapse
The GPRS issue I was having was the GPRS Icon would show that it was connected but it wouldn't move any data. I had to shutdown the GPRS connection by holding the "End" button and restablish the connection. I haven't had that problem since I updated the OS Rom. However I have only had the new Rom installed for a day.

gprs issue
I am having the exact same issue with GPRS.
No data is transferred until you hold the red hangup button, then reconnect.
i-mate K-JAM
ROM 1.1.9.3
Radio 01.01.10
Network: Vodafone NZ
Seems to happen randomly and typically in Internet Explorer - just sits there saying "Locating..." but never goes to opening the page.

Related

Qtek 9100 RUS problem

Hi all.
I have folowing device:
OS 1.3.9.4 RUS
GSM 1.13.10
ExtRom 1.1.7.105
Date 9/29/05
1. After I install GSM ver.1.13.10, i have most discharging batary (short batary-life). It' not good. :-(
Question: Can I install now ver.1.12.10 (previosly installed)?
2. I have strange problem with GSM.
Phone indicator showing good coverage zone of GSM, but incoming calls may not be received (auto response from operator voice system). Only after I calling to any phone number from my device, incoming calls will be good.
Question: Can I do something, or it's hardware problem?
3. I have strange problem with GPRS.
When I turn device ON, GPRS works OK.
But, after some time (with no changing place, where I standing), device can't connect (!) to GPRS. Soft reset -> GPRS work good. After some time -> same problem. After reset -> good work.
Question: Can I do something, or it's hardware problem?
4. Can I do full ROM backup with any software?
I would like to have a FULL BACKUP on a case of warranty service. So that I could do upgrading on mu choice, but in case of breakage of the device that I could restore a BACKUP and give device to repair without superfluous claims from service-center to insertions.
Question: What software can do that?
1. That's true, Radio 1.13.10 works bad with OS 1.3.9.4. You should downgrade it to 1.12.10, file is here:
ftp://xda:[email protected]/Uploads/HTC_Wizard/Radio_Roms/
2. Try radio 1.12.10.
3. This is MTS(Moscow) problem. Still no way to fix it.
4. There is no public programm yet to backup full rom. But you can do it using SD-Card.
Button said:
4. There is no public programm yet to backup full rom. But you can do it using SD-Card.
Click to expand...
Click to collapse
What?
How can I do a full backup using a SD-Card?
Button said:
4. There is no public programm yet to backup full rom. But you can do it using SD-Card.
Click to expand...
Click to collapse
Also you can use aWizard 1.2, no cards.
But with aWizard, if I create a Backup I understood that I backup only the OS and not the entire ROM (tell me if I'm wrong).
The next question is: can I flash an I-Mate Rom and then (in case of need) reflash back my original ROM created with aWizard? After this I'll have a PDA like now?
3. My fried using I-Mate S110 on the same cellular provider (MTS-RUS, Moscow), and have no that problem. And I see him on ICQ (via GPRS) almost all time (24h).
I'm thinking, that problem is in the device (hard or soft).
I using GPRS versions: 1.10.0, 1.12.0, 1.13.0 and problem not resolved.
Maybe problem in OS? Or ExtROM?
Maybe I must install I-Mate ROM or T-Mobile ROM? Or something else? (what else for Q-9100-compatible?)
gnitvik said:
3. My fried using I-Mate S110 on the same cellular provider (MTS-RUS, Moscow), and have no that problem. And I see him on ICQ (via GPRS) almost all time (24h).
I'm thinking, that problem is in the device (hard or soft).
I using GPRS versions: 1.10.0, 1.12.0, 1.13.0 and problem not resolved.
Maybe problem in OS? Or ExtROM?
Maybe I must install I-Mate ROM or T-Mobile ROM? Or something else? (what else for Q-9100-compatible?)
Click to expand...
Click to collapse
Yes, it is. There is no problem with Magician. But it was. It was fixed by new 'radio' release. But still no 'radio', which can fix it at Wizard.
Kostia said:
But with aWizard, if I create a Backup I understood that I backup only the OS and not the entire ROM (tell me if I'm wrong).
The next question is: can I flash an I-Mate Rom and then (in case of need) reflash back my original ROM created with aWizard? After this I'll have a PDA like now?
Click to expand...
Click to collapse
1. You can find the following in its options description:
<b - Backup OS, Radio and Extended ROM from device>
May be it will not solid file. It seems to me it's convinient enough, you could experiment with different OS, radio ROMs and Extended ROMs.
2 . I guess yes. May be extept splash screen if it is different in I-mate ROM. Somebody already published link for clouds splash flash file.
vishny said:
1. You can find the following in its options description:
<b - Backup OS, Radio and Extended ROM from device>
May be it will not solid file. It seems to me it's convinient enough, you could experiment with different OS, radio ROMs and Extended ROMs.
2 . I guess yes. May be extept splash screen if it is different in I-mate ROM. Somebody already published link for clouds splash flash file.
Click to expand...
Click to collapse
I don't doubt that it's fantastic to experiment different solutions....
If the only problem it's the splash screen I will reflash a WWE Qtek (ITA Qtek it's not on the FTP) and then reflash back my ROM with aWizard!
Thanks!
Kostia said:
I don't doubt that it's fantastic to experiment different solutions....
Click to expand...
Click to collapse
My be you are right. But someone searches ROMs for better performance or stability etc.
I used this way to find radio ROM to fix MTS GPRS trouble. Unfortunately still with no success...
gnitvik said:
Hi all.
2. I have strange problem with GSM.
Phone indicator showing good coverage zone of GSM, but incoming calls may not be received (auto response from operator voice system). Only after I calling to any phone number from my device, incoming calls will be good.
Question: Can I do something, or it's hardware problem?
Click to expand...
Click to collapse
Had the same problem with my S100, called t-mobile. They said if you have a constant GPRS connection this problem could arrise, so you have to close your gprs connection after use. (was not the problem in my case).
Another cause according to t-mobile was, if you have phone on constantly something went wrong in the network. They advised me to switch the phone-mode off once a day. And then turn it on again so it would register again in the network. This worked for me.
hope it helps.
Greets Migheltje
MTS is now working with this issue. Such a problem with GPRS\MMS exists now in all WM5 HTC devices.
Button: 13 Radio with the latest test ROM. Battery life seems to be much shorter than 1.6.7.9 with 12 Radio. Which OS version do you think suits 13 Radio to reach 1.1.7.9 with 12 radio battery life?
[CpD said:
bob]MTS is now working with this issue. Such a problem with GPRS\MMS exists now in all WM5 HTC devices.
Click to expand...
Click to collapse
:shock: Please specify with which issue exactly? How about GPRS issue:
http://forum.xda-developers.com/viewtopic.php?t=34138
This problem is in Qtek 9100/k-jam only, I guess it's because of EDGE support. I tried to flash various radio ROMs, it didn't help.
[CpD said:
bob]MTS is now working with this issue...
Click to expand...
Click to collapse
Good news . Waiting for results...
Button: 13 Radio with the latest test ROM. Battery life seems to be much shorter than 1.6.7.9 with 12 Radio.
Click to expand...
Click to collapse
What's the latest test ROM? Never heard about 1.6.7.9 before.. Is it russian one?
Which OS version do you think suits 13 Radio to reach 1.1.7.9 with 12 radio battery life?
Click to expand...
Click to collapse
I don't really know, i refused 1.13 because of a bad work (frequent connection losses, 'abonent is not available now'...). It was tested with O2 1.5.4.2.
vishny said:
[CpD said:
bob]MTS is now working with this issue. Such a problem with GPRS\MMS exists now in all WM5 HTC devices.
Click to expand...
Click to collapse
:shock: Please specify with which issue exactly? How about GPRS issue:
http://forum.xda-developers.com/viewtopic.php?t=34138
This problem is in Qtek 9100/k-jam only, I guess it's because of EDGE support. I tried to flash various radio ROMs, it didn't help.
Click to expand...
Click to collapse
Qtek 8300\8310 - the same problem.
Button said:
What's the latest test ROM? Never heard about 1.6.7.9 before.. Is it russian one?
Click to expand...
Click to collapse
Russian one. Newer OS, IPL, SPL.
[CpD said:
bob]
Button said:
What's the latest test ROM? Never heard about 1.6.7.9 before.. Is it russian one?
Click to expand...
Click to collapse
Russian one. Newer OS, IPL, SPL.
Click to expand...
Click to collapse
And what the sense in newer IPL, SPL at all? What advantages?
I don't see them. New OS enables you to use BT-stereo hs, some changes in interface design - at a first glance
And where it is possible to find 1.6.7.9? :?:
[CpD said:
bob]...New OS enables you to use BT-stereo hs...
Click to expand...
Click to collapse
It looks like AKU2, doesn't it? :?

Wizard Radio Rom Only Updaters (Updated Topic)

Running this RUU will only update your Radio Rom. You will not lose any settings.
These are all in English.
2.x Radio Roms are for use with 2.x Bootloaders only.
They don't work with 1.x Bootloaders (IPL/SPL Versions 1.x). The good news is that since it doesn't dork your BootLoader if you goof you can still reflash with your original Rom and recover your device or use the Cingular 1.09.10 Radio Only Rom included here.
How To Use This RUU Package
1. Select the Radio Rom you want:v1.09.10 from Cingular 1.08 Rom.
v2.25.11 from the leaked Cingular 2.25 AKU 2.2 Rom. Several users have reported that this improves their reception.​v2.25.11 from the leaked Test T-Mobile (US) 2.24 AKU 2.3 Rom. It is also listed as version 2.25.11 but the file is not an exact match to the Cingular Radio Rom.
v2.07 from Summiter's Cingular 2.17 AKU 2 Rom, which was made using components extracted from a device with what is believed to be the mysterious Cingular 2.23 AKU 2.2 Rom.
v2.19.11 from the T-Mobile UK 2.21.0.206 Rom Release, for our European Brothers (and Sisters).
v2.19.11 from the T-Mobile Dutch Website, for our European Brothers (and Sisters).
v2.21.4 from the Xda Minis 2.24.4.101 Rom, for our European Brothers (and Sisters).
v2.27.11 Prodigy Radio Rom. As provided by ShogunMark.
​2. Download the Zip file.
3. Extract the contents into an empty folder on your PC.
4. Make sure you have established a usb connection with your device (Activesync as guest is okay)
5. Execute the RomUpdateUtility_Wizard_NoID.exe
6. Follow the prompts.
Don't worry it won't overwrite your existing Extended Rom, Storage Area or OS so the PDA side of your device will remain untouched.
Just wondering, isnt this the same radio rom thats in the new beta T-Mobile rom?
nickcerda said:
Just wondering, isnt this the same radio rom thats in the new beta T-Mobile rom?
Click to expand...
Click to collapse
Reply by Kyphur
The version number is the same but there have been numerous reports of better performance with the Radio Rom from the leaked Cingular Rom.
So the answer is Yes and No apparently.
If you're not experiencing noticable issues then why bother flashing it. On the other hand it certianly won't hurt to flash it.
Reply by Gamescan
Before I build the "Mr. Clean" AKU 2.3 ROM I did both a binary compare of the T-Mobile 2.25.11 Radio ROM and the Cingular 2.25.11 Radio ROM.
They are *different* files and do seemingly get different reception. In testing on a WIZA100 device, the Cingular version was noticeably better. I haven't gotten around to testing on the WIZA200 yet, but I'm expecting to see the same performance.
As a result of the tests, I included the Cingular version in "Mr. Clean" and kyphur was kind enough to package it separately after people asked for just the Radio ROM.
I downloaded and used the radio update from this thread with no problems it only updated the radio and left my settings intact.
Thanks for the file I need the improved reception
R
Thanks for the Rom, 4 bars at my desk where I used to have 1.... T-Mo Vario
Well, I just ran the ROMUpdateUtility_Wizard_NoID.exe and it completed the installation with my settings intact (in fact, the install only too a minute, whereas the full T-Mobile ROM took well over 5 minutes to complete).
My 8125 is running the AKU2.3 custom Cingular ROM that already had the T-Mo 02.25.11 Radio version. So, I don't have any absolute way to say that the Cingular 02.25.11 installed successfully, guess I'll have to test the signal now
Thanks for the updated Radio ROM
tokuro said:
i just updated my MDA (1.x ROM). it's no good and i had no radio working. I could not even connect via AS.
I booted my phone to bootloader and downgraded to 1.13 and all is ok.
Click to expand...
Click to collapse
Thanks for the report, I'll edit the Original Messege to reflect this.
Works OK on KJAM 2.16.9.1 stock
Hi there,
I installed Cingular radio 2.15.11 on K-JAM running stock latest image:
2.16.19.1.
It installed OK, works OK and so far reception seems better.
Thanks for all the effort providing that,
Hal.
gamescan said:
I know this goes against conventional thinking, but has anyone tried to flash this to a CID LOCKED device? I'm curious if it will work as it doesn't touch the OS or the bootloader. If it does work it'd be a must have upgrade for pretty much *everyone* out there.
My devices have long since been unlocked so I've got no way of testing it.
Click to expand...
Click to collapse
Yep it will work. It's really just the initial and secondary program loaders that are affected by the CID.
Thanks, Kyphur, for posting the Radio ROM
Installed w/o any problem, runs also very well
Cheers
hrb
cingular radio > tmobile radio
I've tried both and I noticed that the cingular is better. Why? Because with the tmobile one my push email would never sync properly on the mda. The cingular is fast and perfect. How fast you might ask? Well my mda receives the notice of new email faster than my Outlook client. But the original tmobile rom, my signal never dropped below 2 bars. The cingular drops 2 bars but that's 60% signal from the reading I get from Voice command. But I've talked for longer than 10 minutes on my phone and it's worked just fine. Kudos to Kyphur for sharing this with us.
gamescan said:
mengesb said:
Hey kyphur,
Well, Summiter put in the radio rom from Cingular's 2.25.11, and I tell yah, I'm still suffering from the same problems. the only choice I have left is the original 2.17 radio code, which I guess I'll have to try once I get around to seeing my home computer - been mobile for 3 days, haven't even seen my own grass... sigh ...
AKU2.3 Radio rom based on t-mo ... failed wifi on pre-n
AKU2.3 Radio w/Cingular 2.25.11 ... failed wifi on pre-n
MengesB w/no Wifi on pre-n ... pre-n failed MengesB!
Click to expand...
Click to collapse
Have you tried a different router? The one thought that pops to mind is that perhaps something in the firmware of the pre-n router isn't completely 802.11b compliant? After all, no 802.11n routers are final yet. It's quite possible there are still bugs on that end.
Click to expand...
Click to collapse
I know officially the stack on Q.11n isn't official, but the router is set to be compatiable with both G and B flavors of Q.11 sequences. What's more disturbing is that it was working with 1.8.11 WWE (stock). I know the firmware in the router is good, works with a Dell TruMobile Wifi, Moto G Wifi, Centrino internal Wifi, and Broadcom Wifi cards... so we've been around the block with Pre-n connecting on a G and B platform systems - it simply does not like my phone. I do have the G hack enabled through Sum Sum, and tried removing it - no difference.
I haven't tried other G routers, besides my SRX100 router, and even with this one its spotty at best - requies disable/enable occassionally when it 'loses touch' with the AP.
I'm wondering if 2 hours of ethereal logs might be required to find out where in the Q.11 stack stuff is messing up. Networking is my ball of wax, and it doesn't make sense to me if a device ARPs for an address, and the device REPLIES saying, "Yeah sure buddy, here you go: x.x.x.x" and the device simply IGNORES it ... kinda confuses me - like a Cisco 2600 that just came back from repair and the stupid idiot soldered a jumper cause 'it was loose'... ugh... numbskull
has anyone in california had good signal with the 2.21.4 radio rom??
ERROR 300 INVALID UPDATE TOOL
Hi,
I've a i-mate k-jam with English rom 2.16.9.1 and radio 02.07.10
When I try to upgrade the radio with the: Cingular_2.25.11_Radinly I received the following erro:
ERROR 300 INVALID UPDATE TOOL
Many thanks
Re: ERROR 300 INVALID UPDATE TOOL
gerard001 said:
Hi,
I've a i-mate k-jam with English rom 2.16.9.1 and radio 02.07.10
When I try to upgrade the radio with the: Cingular_2.25.11_Radinly I received the following erro:
ERROR 300 INVALID UPDATE TOOL
Many thanks
Click to expand...
Click to collapse
Is your phone CID Unlocked?
yes it is unlocked
similar problem....
I am on the imate rom: 2.16.9.1 WWE, radio 02.07.10
I have tried updating to the XDA MINI S Radio rom, and it seems to be succesful, however it still shows as radio rom 02.07.10
any ideas??
gerard001 said:
yes it is unlocked
Click to expand...
Click to collapse
Next question, are you extracting the contents of the zip file into an empty folder? might you have extracted into a folder containing an unhacked version of the updater program and by mistake running it instead of the NoID version?
I unpacked to a new folder.
I think the problem is with the rom that we already have installed that "maybe" is bloking the update ?
kyphur said:
This is the Radio Rom version 2.25.11 From the leaked Cingular 2.25 AKU 2.2 Rom. Several users have reported that this improves their reception.
Click to expand...
Click to collapse
Ok, well my problem has been fixed by using the cingular radio rom.
Successfully showing Radio Version: 02.25.11
maybe try that one gerard?
I will try it, but I think it's the same that I already used...
Thanks

Problems with WiFi (QTEK 9100)

Hi,
Ever since upgrading to 2.17 (official QTEK version) I can no longer get a stable WiFi connection - I get poor signal displayed even though I am next to the AP and it can take anything from 5 to 20 attempts to get connected.
The 9100 came with 1.6.7 installed which not perfect more or less connected first time, but I hoped the later ROMs would fix some other stability problems.
I have tried AKU 2.3 and I still get the same issues (plus I miss the battery indicator in the top bar).
Also, I cannot get back to 1.6.7 (I managed to get the OS back to it but the other 2 were stuck at 2.4) as every time I try I get vendor ID is wrong.
Any ideas?
Cheers,
Taomyn
I have the same problem, but even worse. I see the network after connecting it says it is connected but I cannot browse or do anything on the "socalled Internet" DHCP says that it found an adress in my case at home 192.168.1.33.
I am not sure if an upgrade would help.
My wifi version is 01.04.10
I am looking for any idea too.
Just an update, though the problem remains.
I have downgraded the OS to 2.17 as it seems better than the later ones posted and is at least a QTEK one.
Still hit and miss with the WiFi
Does anyone know if there are any later QTEK ROMS available?
search this forum to find a solution to downgrade the rom version to 1.x then do CID unlock using aWizard.
or you should try upgrade to cingular 2.25WWE rom to see if there is any improvement.
huangyz said:
search this forum to find a solution to downgrade the rom version to 1.x then do CID unlock using aWizard.
or you should try upgrade to cingular 2.25WWE rom to see if there is any improvement.
Click to expand...
Click to collapse
I did try various of the downgrade tips but none seemed to work even though I've got a G3, so hopefully the LokiWiz will be updated soon to work on v2 ROMS.
The Cingular 2.25 ROM didn't work very well either and I hated the extra rubbish it comes with. The radio ROM I happen to be using was from that same one.
I suppose I could go for the 2.25 OS but not the Extension - would that leave behind the Cingular crap?
Taomyn said:
I did try various of the downgrade tips but none seemed to work even though I've got a G3, so hopefully the LokiWiz will be updated soon to work on v2 ROMS.
The Cingular 2.25 ROM didn't work very well either and I hated the extra rubbish it comes with. The radio ROM I happen to be using was from that same one.
I suppose I could go for the 2.25 OS but not the Extension - would that leave behind the Cingular crap?
Click to expand...
Click to collapse
I now run 2.25rom without its original Extrom. It works perfect for me.
huangyz said:
I now run 2.25rom without its original Extrom. It works perfect for me.
Click to expand...
Click to collapse
Thanks. I have now loaded the following but with the QTEK 2.17 Extension ROM:
IPL: 2.24
SPL: 2.24
GSM: 02.25.11
OS: 2.25.11.1
I will have to wait until tonight to try the wireless at home.
One thing I've noticed is that I don't have a battery indicator at all now, neither in the Today window or the bar at the top. I'll dig around more to see why this has happened.
Taomyn said:
huangyz said:
I now run 2.25rom without its original Extrom. It works perfect for me.
Click to expand...
Click to collapse
Thanks. I have now loaded the following but with the QTEK 2.17 Extension ROM:
IPL: 2.24
SPL: 2.24
GSM: 02.25.11
OS: 2.25.11.1
I will have to wait until tonight to try the wireless at home.
One thing I've noticed is that I don't have a battery indicator at all now, neither in the Today window or the bar at the top. I'll dig around more to see why this has happened.
Click to expand...
Click to collapse
it looks a little strange that you have a 2.25OS with 2.24IPL/SPL. :?
you could put a bat. icon on task bar by running Windows\Init_Tray.exe
Ok so I still can't get WiFi working :-( but at least I've sorted the the battery indicator out (thanks to a reg tweak for AKU2.2)
Which leads me to this AKU stuff. I keep reading about 2.3 but I'm not sure if this is an official release or something that someone has put together. I'm willing to give it a try but not if it's just 2.2 with some tweaks or something like that.
Can anyone shed some light on the AKU releases? Mine definitely says 2.2 at the moment.
Oh and can I simply create an upgrade file with just the 2.3 OS file in it?
TIA
Ok, my WiFi is still borked, it sees AP's all over the place but the ones I know it should connect to the phone just will not lock on to - it tries for a few seconds then simply says "Unavailable".
Currently I have on the phone a combination of:
IPL: 2.24
SPL: 2.24
GSM: 02.25.11
OS:2.24.10.1 WWE
Protocol: 4.1.13.12
ExtROM: 2.17.7.102
WM5 5.1.95 (14955.2.3.0)
I've actually tried what should have been a later OS, 2.25, but the AKU was 2.2 and the copyright message shows 2005 where as this one is AKU 2.3 with 2006 displayed.
I'm thinking now that perhaps the Extended ROM which is from the latest QTEK build I could find. Can anyone suggest a good replacement for it that doesn't have a load of baggage and only useful customisations?
As a last resort I'd like to try downgrading back to full 1.x ROM (QTEK 1.6.7 I think) but as I understand it this may not be possible. If it can be done, can anyone point me in the right direction i.e. which downgrade ROM to try? Yes, I have gone through this forum but it's almost "information overload" and very confusing,
TIA
if you update to shipped Cingular 2.25WWE rom, you can bypass all the extrom and see if wifi works normal (before you install other apps.)
Mine is ok.
the AKU2.3 one is a custom test rom which may cause slightly unstable.
while this still doesn't work, i think there's no means except sending your device back for checkup and repair.
Thanks, but how do I "bypass all the extrom"? Is there a clean extrom I can use with it?
Ok, I'm making progress.
I followed the instructions for downgrading, which although says it won't work for 2.21 or above, sort of does.
I downgraded to the custom 1.5.4 which succeeded but left SPL still at 2.24 but everything else had changed. I then ran the LokiWiz v0.2b and that seemed to succeed too at least there were no errors.
I then tested WiFi and it locked and connected first time - yay!!
Next I have taken the 1.6.7 QTEK ROM (which the phone originally had) and when that finished both IPL/SPL were downgraded to v1.x - WiFi still working.
At least now I know that WiFi is not borked but it's some strange ROM issue.
I'm going to try QTEK's 2.17 ROM and see what happens - at least I know I can get back to 1.x if it still doesn't work.
This is fun - not!!
Taomyn said:
Thanks, but how do I "bypass all the extrom"? Is there a clean extrom I can use with it?
Click to expand...
Click to collapse
after the RUU completed and restart automatically, after those init setting you must follow(eg. align screen, select time zone, etc.), at the moment when u see "customize within 3 seconds", poke the reset hole as quick as you can. Then you Bypass the extrom installation.
Thanks - you are being a great help, it's much appreciated.
I went back to 1.6.7 then added the Cingular 2.25 OS ROM but with the QTEK 2.17 extended ROM. What a mixture that is! WiFi would not work. I then hard reset and used your bypass technique - WiFi now works.
It seems that an extended ROM application is screwing up WiFi so I need to get everything up to the latest and greatest, bypass the extended ROM then one by one run them to see which is the culprit.
The plot thickens......
Well it looks like *any* v2 ROM screws up the WiFi on my phone and I have no idea why :x I have tried various combinations of ROM parts (proving the phone is most definitely CID unlocked :wink: ) and I either have no WiFi or some which progressively gets worse as time goes on to the point it stops connecting again.
I'm back to the original 1.6.7 QTEK WWE shipped ROM and WiFi works flawlessly but I'm now missing all the nice tweaks of v2 and I'm sure my BT headset doesn't work as well as before.
Maybe the next release will be better :?
Just to conclude this thread. The 2.26 ROM recently released seems to have cured my WiFi woes and it has made my phone run so much better than before.
I recommend it to anyone
Taomyn said:
Just to conclude this thread. The 2.26 ROM recently released seems to have cured my WiFi woes and it has made my phone run so much better than before.
I recommend it to anyone
Click to expand...
Click to collapse
Cheers!
wifi probs with 2.26
i just upgraded my MDA USA to this ROM. My wifi now doesnt connect. It was working fine with ROM 1.08. Any suggestions? I havent tried bypassing the ext ROM, will this work? thanks
Same problem here as above
I got same wifi problem when upgrading from 2.25 to 2.26 .
i am going to revert back to 2.25 which is from the imate website. and hope it sorts it.
will get back to you when done.

New Radio Rom on WM5

ok, here is the deal.
I flashed the WM5 to my device (Blue angel-qtek 9090), works great !!
standard the radio rom is 1.13.00
a newer is avail. namely 1.15.00
but (as operah says...)
i'm unable to flash the radio rom to my device, yes i checked the forum and read all the BA items....
any suggestions.
greets
ger (the Netherlands)
Go back to WM2003
You can also use the original Provider Package(here you can replace the RadioRom File).
Try to flash the Radio and then revert to WM5 again.
For me it worked.
Last time I had WM5 onmy device I flashed an new radio to see if it worked (was a VERY long time ago).
Have you followed the wiki Radio 1.15 page ?
Thanks for the info!
downgrading to 2k3, updating the radio to 1.15.00.
after that upgraded to 2k5 again.
thanks
by the way what do you mean by ... VERY long time ago....
gr,
ger
Checked wiki and based on my own updates I come up with November 2005.

Flashing OK but ROM not changing

I'bought my Cingular 8125 and I've unlocked it with lokiwiz03a. Then I've flashed diferent ROMs Faria's AKU 3.3 / Molski / Qtek spanish. I have even downgrade it to CUSTOM ROM 1.01. Flashing goes OK, splash screen changes, IPL/SPL also, but ROM version stays 1.5.4.2 WWE / ROM date 11/08/05 / Radio version 01.12.10 / Protocol version 4.0.13.23.
Someone can help me? any idea of what I am doing wrong? or what is the problem?
Thanks.
did u try using this method?
http://forum.xda-developers.com/showthread.php?t=285435
i dont think it uses the lokiwiz03, but instead 02
I tried but says something like "couldn't copy update version of itutils.dll / try to restart device or activesync" (also tried but nothing).
Don't know what to do
Where can I get a Cingular ROM???
Thanks.
How many times you unlocked you device? once?.. you better make it twice or more..
Problem solved. Thank you all.
hhmm...
you have a very unique problem..
had you tried the shelltool to upgrade?
alehardware said:
Problem solved. Thank you all.
Click to expand...
Click to collapse
share with us what solved it incase others have the same problem...

Categories

Resources