Hello everyone im new to the forum, i have a t mobile vario, i have managed to unlock it curtusy of lokiwiz unlock 0.2a. i have a few questions if someone could help me on
1. on the unlocker software there is a option of CID unlocking, what is this?
2. is there any differences between the different variations of the wizard, 02 mini, tmobile vario, kjam, qtek.... which has the better firmware??
3. can i put either kjam or qtek firmware on my vario?
Many thanks peeps :lol:
Speaking as an MDA Vario owner who has reflashed with the k-jam ROM (and now can't go back!) I would say the only benefit of changing ROM is to enable 802.11g network access, which T-Mobile disabled in software.
There appear to be no other benefits. On the downside there are features that come with the Vario that do not work with the k-jam ROM. e.g. the email setup wizard does not work. Hardly a showstopper but an example. There is also an error message on resetting about elatepushservices.exe not found or not signed. Again, it doesn't seem to cause a problem but why klutz your machine up without a good reason to do so? The version numbers of everything that comes with the Vario also seem to be higher than the k-jam ROM, which I'm guessing is a good thing.
Unless you simply must have 802.11g connectivity, as well as 802.11b, my recommendation would be to leave well alone. It will also make warranty support much easier.
oh ok so is that the only major difference then. i find my vario isn't that stable. my device currently reads
rom version 1.3.2.2 enu
rom date 9/25/05
radio version 01.04.10
protocol version 4.0.13.17
extrom version 1.3.2.102
did u use ftp://ftp.clubimate.com/ for your firmware?
insaneclown23 said:
oh ok so is that the only major difference then. i find my vario isn't that stable. my device currently reads
rom version 1.3.2.2 enu
rom date 9/25/05
radio version 01.04.10
protocol version 4.0.13.17
extrom version 1.3.2.102
did u use ftp://ftp.clubimate.com/ for your firmware?
Click to expand...
Click to collapse
I did use the clubimate ftp ROM and my equivalent figures, with the Vario extended ROM remaining, are....
rom version 1.1.9.3
rom date 9/16/05
radio version 01.01.10
protocol version 4.0.13.16
extrom version 1.3.2.102
so all my version numbers are lower than yours excep the extended ROM, which I saved from my Vario.
I don't recall the Vario ROM being less stable than the k-jam but you need to be very careful what software you install as there is a lot of stuff that is not 100% WM5 compatible. It might install and it might run but it might also crash or destabilise your machine. I have only installed the T-Nobile supplied GPRS monitor, Total Commander, TomTom 5.21 and a couple of GPS utilities and that's it.
As soon as you start throwing in today plugins and other system utilities that are less than 100% WM5 compatible you are asking for trouble, IMHO.
Hi there,
I just looked on the FTP, but is there any Dutch K-Jam/Qtek 9100 ROM available for the MDA Vario?
Thanks!!
Jeremy.
on the ftp i can see:
RUU_Prodigy_1030710_110_10410_Qtek_NLD_Ship.exe
-> uploads/htc wizard
this is right for you
JayRayMee.NL said:
Hi there,
I just looked on the FTP, but is there any Dutch K-Jam/Qtek 9100 ROM available for the MDA Vario?
Thanks!!
Jeremy.
Click to expand...
Click to collapse
Just check the XDA-Dev. FTP site.
There you can find the Dutch rom which greddy pointed out.
ftp.xda-developers.com
user = xda
pass = xda
hmmm by the looks of it i might hold out until theres some newer rom updates with significant improvements. at the mo it looks like theres only a few tweeks and i dont wana risk bricking my vario.
t mobile released updates for the mda compact and mda II http://t-mobile.iris-global.com/mdas.html
maybe they'll release some for the vario???
For us we own an english version of Qtek 9100 in which site we'll find the future ROM Updates?
have you tried xda developers ftp site? ftp://xda-developers.com/ or dont qtek have a support area?
Hi there,
Thanks, I didn't see that.
A few questions:
1. HOW CAN I DOWNLOAD THE FILE?? I can access the FTP-server, but when I try to download the Rom, the file stops downloading after apx. 20 - 40%, whichafter I even have to reset my router to get the internet working again. I used both the FTP Explorer and the Internet Explorer.
2. Should I also upgrade the Extended Rom? I want to get rid of these ugly, squared, pink and grey T-Mobile phonepad keys, so is this stored in the Extended Rom?
Which Extended Rom should I use? There are more of them, so which one is for use with the Dutch Qtek 9100 Rom?
Thanks again!!!
insaneclown23 said:
oh ok so is that the only major difference then. i find my vario isn't that stable. my device currently reads
rom version 1.3.2.2 enu
rom date 9/25/05
radio version 01.04.10
protocol version 4.0.13.17
extrom version 1.3.2.102
Click to expand...
Click to collapse
If you ae comfortable doing this, could you perhaps make a backup of your t-mobile rom. I downgraded to the k-jams rom without doing a backup...silly me, anyway would be grateful if someone would pop a copy on the ftp here.
rgs
Jim
I also done exactly the same, i didn't have a miniSD card, an i was too eager to upgrade so i couldn't backup my rom.
Now i wanna go back to the T-Mobile rom but no one has one on the FTP. would you be able to upload yours?
It would be very much appreciated by a lot of people here.
Cheers
i dont mind creating a back up of my rom, if someone can point me to how i can do this.
i to want to get rid of the rubbish pink phone pad, it looks ugly
jay - are you using ftp://ftp.clubimate.com/ or ftp://xda-developers.com/ ? it should work, unless your connection keeps dropping?
Need to refresh my memory on the back up procedure... get back to you on that later.
Regarding the pink key pad, a bit of registry hacking should sort that out
If you have a registry editor, follow the below, worked fine on Compact II but never got to test it on the vario before the downgrade
HKEY_LOCAL_MACHINE\Security\Phone\Skin
Properties
Dword- Enabled
Value - 0 (default HTC skin - cool blue)
if you change the value to 1 it then displays the T-mobile's wonderful pink and grey pad.
Save the changes and they do a soft reset
Hope that helps
rgds
Jim
insaneclown23 said:
have you tried xda developers ftp site? ftp://xda-developers.com/ or dont qtek have a support area?
Click to expand...
Click to collapse
Yes, i've tried in the FTP site. But in there the roms are backed up from other devices and not directly from Qtek support. First, I would like know if there is problem or there are any diferrences between roms backed up from devices and the other from official support.
In the end, i'm asking if there is a link for official Qtek support where we can find the future rom updates.
There is a nice pdf guide on backing up your ROM here you need to do procedure 'r2sd all' as opposed to 'd2s' as suggested as that guide was for the magician.
rgs
jim
Newest ROM?
Hi,
I own a T-Mobile MDA Vario, too. It is already flashed with a WWE-KJam-ROM. Now I want to know, if there is a possibility to flash a German ROM to it. Or if there is a newer version of the KJam.
My device informations:
ROM version : 1.1.9.3
ROM date : 9/16/05
Radio version : 01.01.10
Protocol version: 4.0.13.16
ExtROM version: 1.1.9.106
Greetz
Micha
t mobile english version
hi to everyone
I have a mda vario with t mobile deutch and I'd like to know if it is possible to flash the rom into english t mobile rom or an other english rom. If possible could u gently explain me how to do?
many thanks
here are so many people with a German MDA Vario.
Isn´t it possible, that one of them reads out the original ROM and set´s it to the ftp so that others, that want a German ROM can flash this?
I am not a professional in this, so correct me if that is not possible...
Micha
Related
Is T-Mobile 1.31WWE new ROM available?
I am not a techie, please help:
Using GetDeviceData.exe (wiki tools) I see (from DeviceData.txt):
PH20B 0 B WWE E T-MOB101 1.12.00 0 0 1.22.168 1.00.00 00.00
My extROM seems to be Italian, I need the English One as well.
2.
If T-mobile new ROM is not available yet, is there a way to install from Asian O2 (available and downloadable)? I ALWASY GET COUNTRY ID ERROR
Thanks and waiting
saulo866
rreally nobody can help me to solve this upgrade problem (country code mismatch) on my MDA III from T-Mobile WWE?
I heard that even xda tools cannot overcome the new encryption barrier which was incorporated into 1.31 ROM XDAIIi upgrade
Thanks and waiting
Saulo866
Just follow this link
jeez, so frustrated
hi, i have the exact same german make as the example in the link you gave has:
http://wiki.xda-developers.com/inde...x20.correctx20.upgradex20.ROMx20.forx20.mex3f.
getdivicedata.exe gave me the same thing,
i downloaded the same files in the links, and used the same fix.bat
the dos screen seemed to have fixed the files. but then i ran the baupgradeut.exe and it still gave me the country code error. i followed everything.
my only mistake was i started off with 1.12 wwe (came with the phone when i bought it off ebay) and tried to upgrade to 1.22---but the only on that worked was the german one---so no i got german 1.22 and i can't understand a thing. jeez,
but the instructions didn't work, anyway you can post your finished upgrade rom, that you used, so all i have to do is download and run the program?
plleeeezzzzeeee, with love :B
oh, i meant to say, can you, or may you, rather the the former
Look if you get a country code error then you have a country code error, its just that simple.
What devicedata shows you is what it finds on the phone, now if somebody flashed it before you got it of ebay, then that is what you get. It is maybe not what it was shipped as.
The German t-mobile is only sold as GER and has a QWERT keyboard. T-Mobile has sold a WWE version. (in other countires)
You are saying that yours was WWE, well WWE and GER are not the same.
So if you used the fix bat in the example like you said, then you tried to tell the device that it is GER and thus got a country code error.
I fail to understand how flashed it with a german version (which is not in the instructions of the posted link).
SO after all that, What do you want to do?
mdaiiiuser, thanx for replying. it's not that complicated. it used to be a german model, with german flash.
it was flashed befor i got it, i think in australia, with wwe 1.12.
and my dumb ass flashed 1.22 in german.
darn.
so, i'm lost and surfing aimlessly thru the internet for a solution. i alrady racked up a good 15 dollars in long distance bill to england today. i wll probably call germany tomorrow. but i must persit. lemme know if you OR ANYONe, has any ideas., thanx.
Boy would I enjoy not having to read this in every 2nd new tread.
Ok a reacp of what I understand.
You have a German MDA III with a qwertz keyboard. (that you got from bla bla).
You flashed it with a GER T-mobile rom using the ship.exe (and no fix.bat) which proves that the op and country code are good.
Its now in German and thus no good to you.
You are now trying to flash it with any WWE rom and get a country code error. This includes the I-mate 162 of wiki, which you have followed the steps to the letter and had no results.
Based on this my conclusion is the follwoing.
Your new GER rom has the new encription which means that what ever is checked is found at a different place than before thus the Country code error.
To prove this you need to run the Fix.bat against the GER rom and see if you get a header error (checksum or password). This in a OPEN dos window to beable to read it. Post your results if only for information reasons.
In the mean time I would redo the Imate 162 flash, drop the device number in the fix.bat and swap the postion of op and county code. (this is a hunsh never was able to prove it).
Post the name of the rom you used the fix.bat (relavant parts) and what ever you get as a message.
i started another thread, with COUNTRY CODE error, that outlines everything i did. maybe i didn't use the 162. i will try that now.
can you upload your modified files that you used? or email them to me, or exchange through im? please let me know, thanx.
i the original 1.12 and flashed that, and at least i have english now. but a german 1.22 external rom, lol.
WOOO HOOOOO
hehhehh, if anyone is bored enough to find my last 5 posts, you will find that, no only did i misflash my blue angel to german, but i didn't know how to fix it, and didn't know how to manage cab files.
i had a very limited understanding of my $800 cell phone.
because of this website, i found the only working firmware shipper, 1.12, and now i have flashed to 1.12, with and external cook of german 1.22, and wwe applications packages. i know how to upgrade the radio and bluetooth files, but don't see a need yet, the german 1.22 is working better than the stock 1.12 i had before. I'm content
i have learned, how to flash
how to use, manage external rom and cab files
downloaded a wealth of apps and knowlegde
thanks to the good people of this website
no i will proceed to donate some mula,dinero,okane,bani, cold hard glorious cash for my appreciation
this website and the community made my $800 mda worth it
thanx to:
beyondtheteck
mdaIIIuser
prophet,
and everyone else
:twisted: :lol:
IF THIS WEBSITE EVER HELPED YOU OUT OF A BIND, DONATE!
So now
maybe i didn't use the 162.
Click to expand...
Click to collapse
, well thats a great start.
Have fun, I give up
just donated 18 euros ($ 25 dollars -- thank you Mr. Bush for screwing up our US Currency).
if i had more, i'd give more---would you all consider $18 euros enough?
hence, my 1 DONATION STAR YEEEEE
Dear GCPreda
Yes, not being a techie, I also would very much appreciate if someone, with our same setup, (MDA III T-Mob Ger) could work out a fully functional 1.31 WWE ROM + ExtROM to simply download (from anywhere, any ftp site) and launch.
I know I am asking too much, but I still hope
Thanks
Saulo866
does someone knows where to download the latest ROM and ExtROM for
MDA III T-mobile WWE
or
MDA III T-mobile ENG
Thanks a lot
saulo866
I see there are a bunch of ROMS in the FTP, I am at a loss to which one I should be using however. I've been trying a few and some of them run laggy yet others run fine but have some stuff missing (one of them didn't have a button to disconnect from GPRS?)
I'm pretty new to this, I have a "Orange SPV M3000" from Orange NL but I don't want the Dutch ROM on there..
Just a simple question, what English ROM is currently the best one I should be using, and what Extended ROM files should I have as a necessity?
the one from Qtec 1.6.7.1 is the best i think
PM Me with it?
Since all the WM5 ROMs have been removed from the FTP site could someone please PM me with the Qtek ROM mentioned above? Or upload it to yousendit.com and post a link to this thread (or PM it).
Not sure what you're talking about - it's still there;
HTC_Wizard/Roms/Qtek/Qtek_9100_1_6_7_ENG__OS_ONLY.zip
Hey, is it possible to unlock and rewrite the Extended Rom on this version?
What I've heard is that past version 1.6.x.x that the Extended ROM is READ ONLY.. I've been having problems trying to put things into my Extended ROM. I even reverted to an older firmware just to update it, without success I might add.
Is there any work around??
oh i thought that the 1.6 not have the rom locked :-(
Go for the WWE AKU2 rom. I am using the 2.8.7.1 one from Qtek on the Vario.
There are operator specific cabs available for ie gprs and mms
Its stable!
hello,
I have HTC QTEK 9100 with:
ROM VERSION - 1.6.7.1 WWE
ROM DATE 11/28/05
RADIO VER 01.12.10
PROTOCOL VER 4.0.13.23
EXTROM VER 1.6.7.101
if this ROM vers are good and are there need to upgrade it ?
if yes from where i can download working rom vers ?
10x
See this post:
http://forum.xda-developers.com/viewtopic.php?p=301921&highlight=#301921
I would prefer this rom ftp://xda:[email protected]/Wi...digy_2170702_21707102_20710_QTEK_WWE_Ship.exe
Its AKU2
Straight upgrade without the need to unlock your device.
Does not void your warranty
Safer.
meschle said:
I would prefer this rom ftp://xda:[email protected]/Wi...digy_2170702_21707102_20710_QTEK_WWE_Ship.exe
Its AKU2
Straight upgrade without the need to unlock your device.
Does not void your warranty
Safer.
Click to expand...
Click to collapse
hi, what are diference between my ROM and your adviced ROM ver ?
Hi, i used to use your rom before my current and it was quite a good rom but the aku2 rom i suggested is better
1. Has push email - so your email arrives in a way that your sms's does, almost instantly.
2. Rom is more stable - no more spontaneous soft reset's or dropped calls
3. Battery life is noticeably better.
4. Device is a bit quicker
5. Calls using the phone are better because it has an updated radio.
6. Downside is 2 line date - can be sorted with lvmtime and battery on taskbar - can be covered with same program.
hope that helps
meschle said:
I would prefer this rom ftp://xda:[email protected]/Wi...digy_2170702_21707102_20710_QTEK_WWE_Ship.exe
Its AKU2
Straight upgrade without the need to unlock your device.
Does not void your warranty
Safer.
Click to expand...
Click to collapse
Hi ,
Is this the latest normal rom, i mean not tweaked, tinkered or modified ?
I looked in the FTP server but the numbering system for the roms is not really clear...
Since i am Dutch i don't mind a Dutch version...
Does it have A2DP ?
rgrds Mike
I assume you have a t-mobile vario - latest official dutch rom is here http://www.t-mobile.nl/zakelijk/med...y_2210205_22102108_021911_TMO_NL_DUT_Ship.exe
You can stop the t-mobile extras installing by doing as soft reset just before they install. None of the roms mentioned include a2dp but there is an easy addon for that look at the a2dp addon thread.
meschle said:
I assume you have a t-mobile vario - latest official dutch rom is here http://www.t-mobile.nl/zakelijk/med...y_2210205_22102108_021911_TMO_NL_DUT_Ship.exe
You can stop the t-mobile extras installing by doing as soft reset just before they install. None of the roms mentioned include a2dp but there is an easy addon for that look at the a2dp addon thread.
Click to expand...
Click to collapse
Hi thx for the info.
Your're right i have an MDA Vario
Btw is this the latest ever or just the latest dutch ?
And is it newer than the above mentioned Qtek ?
rgrds Mike
Its newer than the above qtek rom the first few numbers give it away 2.21 vs 2.17 the higher this first number the newer the rom.
There is a newer qtek rom 2.8 something but its a test rom but you can get it in dutch. Only problem is that when you boot up it says test rom and some people have noticed a memory leak, but it does have a2dp included but many have reported it does not work that well with this rom.
re
meschle said:
Hi, i used to use your rom before my current and it was quite a good rom but the aku2 rom i suggested is better
1. Has push email - so your email arrives in a way that your sms's does, almost instantly.
2. Rom is more stable - no more spontaneous soft reset's or dropped calls
3. Battery life is noticeably better.
4. Device is a bit quicker
5. Calls using the phone are better because it has an updated radio.
6. Downside is 2 line date - can be sorted with lvmtime and battery on taskbar - can be covered with same program.
hope that helps
Click to expand...
Click to collapse
hmmm, sounds good
send me link to this ROM please. i use my mobile with English and Bulgarian languages. Is it work with ENG and BG ? I think Yes, but ...
re
please give me link to AKU2 ROM version for my mobile: HTC QTEK 9100
with Eng and Bulgarian support. Mobile Operator : Mobiltel Bulgaria. 10x
hi, i upgraded ROM to AKU ver 2.17
but please help me to remove the new batery and GPRS icons
from the top info bar... the icons appeared after upgrade.
10x
Those icons are part of the ROM. All ROMs of the AKU 2.1 variety are going to have those icons in place.
That said, if I were you I would immediately downgrade back to a 1.x ROM and do a CID unlock before upgrading. You don't NEED to do it if you stay with operator ROMs, but if you ever want to use a custom ROM in the future it's something you'll want to do.
The CID encryption changed somewhere between 2.17 and 2.21 and the unlocking tools no longer work. If you upgrade to a bootloader that is version 2.21 or higher you will not be able to use the current downgrader tool and you will not be able to use lokiwiz02b to unlock the CID. At that point the only option is to pay imei-check.co.uk to do the job. Might as well take the free route while you can.
re
why I need to upgrade ROM again ? this ver is working OK till now
i have not operotors ROM.
darkheroz said:
hi, i upgraded ROM to AKU ver 2.17
but please help me to remove the new batery and GPRS icons
from the top info bar... the icons appeared after upgrade.
10x
Click to expand...
Click to collapse
I use lvmtime - it covers over the battery icon and levenum has done a good job with it. (new version expected soon) see here http://forum.xda-developers.com/viewtopic.php?t=45084
Help, I have Qtek 9100 on the O2 network in England, it doesn't have all the O2 customisations so I'm thinking it is a basic Qtek ROM. At the moment it is running the 1.1.7.5. ROM. I'm looking to upgrade the ROM, the 2.1.7 seems to be the best. But despite reading through the forum I have some questions.
1 - Does the Qtek 9100 need CID unlocking? I've read that if I install the Qtek 2.1.7 upgrade I won't need to CID unlock the phone.
2 - Is the latest ROM shown on the Qtek site the 2.1.7. version?. I have tried to log on to that site but its says it does support the IMEI I've entered.
3 - What is Cingular?
4 - Could some one post the link to the 2.1.7 Rom English upgrade?, I've found a step by step guide to upgrading and loads of links to different ROM's But want to be sure that I've got the link to the right one.
5 - Is it worthwhile carrying out the upgrade, and how likely am I to bust my phone?
Thanks in advance for the advice, In short all I want the best upgrade with the least amount of hassle to upgrade.
Hi,
If you stick with the Qtek rom, you dont need to CID unlock...but it is worth doing for future use...as you can not CID unlock a v2 ROM....yet.
Cingular is a US phone company...like O2, T-Mob etc.
If you follow the instructions, you should be ok, i have done a couple, and touch wood have all been ok.
I think you need a ROM from this lot:
ftp://ftp.xda-developers.com/Wizard/Roms/Qtek/
but I dont know which one is the newest...most stable etc.
GOOD LUCK
I'm in a similar situation here, I've currently got the O2 Supplied 2.21.4.1 WWE ROM, most people here seem to be upgrading to other ROM's such as those supplied by QTEK... looking at the Wizard ROMS on the FTP, which one should I be upgrading to? And what are the 'prophet' ROM's on there?
think I've got it it sorted now, shouldn't need to CID unlock if I use the Qtek 2.1.7 release. Not sure I need any other companies Roms unless someone is going to tell me they have some features I can't live with out ?
Which ROM(s) can boot as quick as 2.25 and is the most stable? I am using 2.25 and don't like it because of the dropped calls issue. I've used 2.17 but the reboot times are attrocius.
TIA
You can try my Rom from www.molski.biz
It's a T-Mobile 2.26.10.2 Rom, but then Cleaned from all the T-Mobile stuff.
You can find the description/details of what is in the Extended Rom of my Rom on the page where my Roms are.
Regards,
Molski
I've been using Gamescan's Mr. Clean AKU 2.3 for a couple months now on an 8125 using TMO. It's very stabe, has excellent reception, and is very fast.
At first one finds a shorter battery life. However, after a week or so, the battery life seems to get back to normal.
I have had the least issues with this ROM. I never have to soft reset.
molski how to enter your site?
I know it's a dummy question, but I can see only homepage - no option to proceed (IE & Firefox checked)
In the left frame (under the logo) you should see a Java Pulldown Menu. There you can navigate on my website.
If it doesn't work here are 2 links directly to the Rom Files
2.26.10.2 Dutch Rom
2.26.10.2 WWE Rom
Regards,
Molski
p.s. All my websites work in IE and FF on my laptop
Maybe it's a MS Java issue, it doesn't like original Sun's release (I've got both on my PC)
Thank you very much for the links :!:
My website should work with the Sun Java Packages. I also use Sun Java instead of MS Java.
But for now you got 2 direct links to the files you want
Molski
I have installed Molski's ROM into my Vodafone VPA Comtact II and I think it is the best one that I have ever seen until now.
Thanks guy!
Qtek or one of the other brand's?
Hi
Did you changed the T-mobile to Qtek branding on this Rom?
All the programs on the Qtek original Rom are available on this one?
Do you notice any Speed increase running programs like Igo or Tom tom, in my standard Qtek Rom 2.17 the GPS programs seem a bit slow.
Tkx
molski said:
You can try my Rom from www.molski.biz
It's a T-Mobile 2.26.10.2 Rom, but then Cleaned from all the T-Mobile stuff.
You can find the description/details of what is in the Extended Rom of my Rom on the page where my Roms are.
Regards,
Molski
Click to expand...
Click to collapse
Molski, thanks. Just wondering how I can add the cingular extended rom stuff after installing your ROM? Thanks.
@anubus12 - What Cingular extended stuff do you need ?
If you need the Cingular Connection Wizard look here Tmo 2.26 ROM with Cing customizations
Dr Puttingham said:
@anubus12 - What Cingular extended stuff do you need ?
If you need the Cingular Connection Wizard look here Tmo 2.26 ROM with Cing customizations
Click to expand...
Click to collapse
That's a great question. I feel stupid. What usually goes into a Cingular Extended ROM?
molski said:
You can try my Rom from www.molski.biz
It's a T-Mobile 2.26.10.2 Rom, but then Cleaned from all the T-Mobile stuff.
You can find the description/details of what is in the Extended Rom of my Rom on the page where my Roms are.
Regards,
Molski
Click to expand...
Click to collapse
Molski, installed your ROM and everthing is working great. Thanks. Just wondering, I tried to run a few apps and I get an error that I do not have the latest version of .NET Compact Framework installed. Where do I get and how do I install the latest version? Thanks!
anubus12 said:
molski said:
You can try my Rom from www.molski.biz
It's a T-Mobile 2.26.10.2 Rom, but then Cleaned from all the T-Mobile stuff.
You can find the description/details of what is in the Extended Rom of my Rom on the page where my Roms are.
Regards,
Molski
Click to expand...
Click to collapse
Molski, installed your ROM and everthing is working great. Thanks. Just wondering, I tried to run a few apps and I get an error that I do not have the latest version of .NET Compact Framework installed. Where do I get and how do I install the latest version?
Thanks!
Click to expand...
Click to collapse
You can get the latest version [version 2 I think] of .NET Compact Framework at freecabs.de it will be in a .cab format, so just download it via wi-fi on your PPC or to your PC, then Active sync and copy file to your device or storage card. Execute the file from the device.