originally i've had k-jam ROM on my wizard but then i've flashed it using aWizard with Qtek ROM and then using RUU with RadioROM. before flashing process i did CID unlock of course. but now i'd like to flash it again with this RUU:
ftp://xda:[email protected]_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
but i've a bit doubt about CID unlock, so my questions are:
1) do i have to do it again before using RUU?
2) does this RUU lock CID again so after flashing wizard with RUU will i need to unlock it later?
i already know that using aWizard it's needed to enable RAPI every time but CID unlock matter is not that clear.
just once.. hope that helps
rgs
Jim
Related
Hello Guys,
i unlocked my CID and flashed my Wizard succesfull but now, I want to flash the old original ROM. I want to know, if the CID is now every time a SuperCID or must I unlock my CID again bevor flashing?
If the CID is still a SuperCID how can I Restore the backup of my original CID for warranty?
CID means carrier id, is that right? Therefor i would say that my colleague with the same Wizard from T-Mobile Germany has the same CID, is that aslo right?
I hope you can help me.
I am also wondering how we can restore the original CID lock...!?
I'm S-OFF. My device is recently unrooted, and my version is 1.28.771.10 on the THREE 3 UK network. It seems there isn't an RUU for my phone released by three. Is there any way that I can return to stock so that my phone is as new? Step by step instructions would be appreciated as i'm very new to this. My bootloader is also locked.
I am on 3 UK also.
Have done this many times .
As you have S off you can change your cid (customer or carrier id) from H3G__001 (which is 3 UK)
to so called super cid which is
11111111 (eight 1's)
When in bootloader fastboot usb mode
C:\adb> fastboot oem writecid 11111111
This will allow you to use any version RUU for your model.
Best one is WWE version which has 401 in the place where yours had 771.
I have always been unlocked when doing this. As you have got S off I will assume you can unlock bootloader.
Then download to your pc the appropriate ruu, I would suggest file (very long filename, I will just list first part of filename - will edit post to add download link)
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7
Download this to your pc
http://www.androidruu.com/getdownlo...31.27_10.31.1131.05_release_310878_signed.exe
It's a large file 990 MB .
The following will delete all your data, photos, video, music, txt , etc (phone number should remain in SIM ) so BE SURE TO COPY FROM PHONE TO PC ANYTHING YOU WANT TO KEEP.
Then connect your HTC One to your pc with usb cable (usb 2, preferably) and simply run the program you've just downloaded .
Your phone can be either in fastboot mode or with android running, doesn't matter which .
Follow on screen instructions, ticking boxes as appropriate.
Total process takes approximately ten minutes from starting the program to finish.
When finished you will be on stock 1.28.401.6 which is original Android 4.1.1
However if you wish you can easily update Ota (over the air) through successive versions up to 4.2 by entering settings then about then software updates then check now
Hope this helps
Sent from my HTC One using xda app-developers app
paul_59 said:
I am on 3 UK also.
Have done this many times .
As you have S off you can change your cid (customer or carrier id) from H3G__001 (which is 3 UK)
to so called super cid which is
11111111 (eight 1's)
When in bootloader fastboot usb mode
C:\adb> fastboot oem writecid 11111111
This will allow you to use any version RUU for your model.
Best one is WWE version which has 401 in the place where yours had 771.
I have always been unlocked when doing this. As you have got S off I will assume you can unlock bootloader.
Then download to your pc the appropriate ruu, I would suggest file (very long filename, I will just list first part of filename - will edit post to add download link)
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7
Download this to your pc
http://www.androidruu.com/getdownlo...31.27_10.31.1131.05_release_310878_signed.exe
It's a large file 990 MB .
The following will delete all your data, photos, video, music, txt , etc (phone number should remain in SIM ) so BE SURE TO COPY FROM PHONE TO PC ANYTHING YOU WANT TO KEEP.
Then connect your HTC One to your pc with usb cable (usb 2, preferably) and simply run the program you've just downloaded .
Your phone can be either in fastboot mode or with android running, doesn't matter which .
Follow on screen instructions, ticking boxes as appropriate.
Total process takes approximately ten minutes from starting the program to finish.
When finished you will be on stock 1.28.401.6 which is original Android 4.1.1
However if you wish you can easily update Ota (over the air) through successive versions up to 4.2 by entering settings then about then software updates then check now
Hope this helps
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Hey buddy, I know this is an old threat but you're on the exact same network as me and such.
I managed to get back to stock, and i'm on android version 4.1.2... but i can't seem to find any OTA android updates? Which is the main reason why I unrooted my phone. Tried the google framework fix too. Got any ideas?
tomquartey said:
Hey buddy, I know this is an old threat but you're on the exact same network as me and such.
I managed to get back to stock, and i'm on android version 4.1.2... but i can't seem to find any OTA android updates? Which is the main reason why I unrooted my phone. Tried the google framework fix too. Got any ideas?
Click to expand...
Click to collapse
If you are supercid (11111111) you will not get ota. You must change cid to one that match you OS base.
alray said:
If you are supercid (11111111) you will not get ota. You must change cid to one that match you OS base.
Click to expand...
Click to collapse
I had to SUPER CID to flash this particular RUU.
If I change my CID back now, will this mean my RUU is redundant and then brick my phone?
And the original CID was H3G_001. Do I need to go back to this one?
tomquartey said:
I had to SUPER CID to flash this particular RUU.
If I change my CID back now, will this mean my RUU is redundant and then brick my phone?
And the original CID was H3G_001. Do I need to go back to this one?
Click to expand...
Click to collapse
no its safe to change CID, you will never get OTA with supercid from this carrier
change back your cid to H3G__001 (2 lower case H3G _ _001)
Code:
fastboot oem writecid H3G__001 [COLOR="SeaGreen"]---> cid change[/COLOR]
fastboot reboot-bootloader [COLOR="SeaGreen"]--> reboot and go back to fastboot usb[/COLOR]
fastboot oem readcid [COLOR="SeaGreen"]--->confirm cid is now H3G__001[/COLOR]
fastboot reboot [COLOR="SeaGreen"]--->reboot to system[/COLOR]
then install ota
alray said:
no its safe to change CID, you will never get OTA with supercid from this carrier
change back your cid to H3G__001 (2 lower case H3G _ _001)
Code:
fastboot oem writecid H3G__001 [COLOR="SeaGreen"]---> cid change[/COLOR]
fastboot reboot-bootloader [COLOR="SeaGreen"]--> reboot and go back to fastboot usb[/COLOR]
fastboot oem readcid [COLOR="SeaGreen"]--->confirm cid is now H3G__001[/COLOR]
fastboot reboot [COLOR="SeaGreen"]--->reboot to system[/COLOR]
then install ota
Click to expand...
Click to collapse
Thank you buddy, will try this soon.
tomquartey said:
I had to SUPER CID to flash this particular RUU.
If I change my CID back now, will this mean my RUU is redundant and then brick my phone?
And the original CID was H3G_001. Do I need to go back to this one?
Click to expand...
Click to collapse
alray said:
no its safe to change CID, you will never get OTA with supercid from this carrier
change back your cid to H3G__001 (2 lower case H3G _ _001)
Code:
fastboot oem writecid H3G__001 [COLOR="SeaGreen"]---> cid change[/COLOR]
fastboot reboot-bootloader [COLOR="SeaGreen"]--> reboot and go back to fastboot usb[/COLOR]
fastboot oem readcid [COLOR="SeaGreen"]--->confirm cid is now H3G__001[/COLOR]
fastboot reboot [COLOR="SeaGreen"]--->reboot to system[/COLOR]
then install ota
Click to expand...
Click to collapse
1- easy on the double posting , then make up your mind, where you wanna post, so people can actually help
2- what ruu are you referring to?
3- no just changing CID back to original (H3G__001) does not mean you're going to get any OTA if the ^^ ruu is not H3G
nkk71 said:
1- easy on the double posting , then make up your mind, where you wanna post, so people can actually help
2- what ruu are you referring to?
3- no just changing CID back to original (H3G__001) does not mean you're going to get any OTA if the ^^ ruu is not H3G
Click to expand...
Click to collapse
I was told to change my RUU to a particular RUU from another user who is on the same network as me.
tomquartey said:
I was told to change my RUU to a particular RUU from another user who is on the same network as me.
Click to expand...
Click to collapse
well if you are on CID H3G_001 then this "change my RUU to a particular RUU" (there is no particular RUU) makes no sense at all, if you are S-Off:
1- you can change CID to unbranded and use an unbranded RUU
2- you can use one of the guides around here to go back to H3G stock
Greetings to all,
I have htc one m7_ul, hboot 1.54 s-on, mid PN07100, cid VODAP102
As you understand all the phone unfortunately is vodafone branding with the annoying vodafone boot logo and other silly vodafone aps.So... i want to ask the community if and how i can unbrand the phone from vodafone an be complete htc stock with latest official htc firmware.
Thanks in advance
Anoubis282 said:
Greetings to all,
I have htc one m7_ul, hboot 1.54 s-on, mid PN07100, cid VODAP102
As you understand all the phone unfortunately is vodafone branding with the annoying vodafone boot logo and other silly vodafone aps.So... i want to ask the community if and how i can unbrand the phone from vodafone an be complete htc stock with latest official htc firmware.
Thanks in advance
Click to expand...
Click to collapse
Brief description: Well if you completely want to modify your phone, you'll need to use rumrunner to get S-Off (that includes unlocking the phone, and other prerequisites for rumrunner)
Once you're S-Off you can change your CID to something more universal such as HTC__001 and use a full RUU (exe) to downgrade to complete WWE stock, and start receiving OTAs to the latest available (depending on which CID and RUU you end up using).
Thanks for your respond
nkk71 said:
Brief description: Well if you completely want to modify your phone, you'll need to use rumrunner to get S-Off (that includes unlocking the phone, and other prerequisites for rumrunner)
Once you're S-Off you can change your CID to something more universal such as HTC__001 and use a full RUU (exe) to downgrade to complete WWE stock, and start receiving OTAs to the latest available (depending on which CID and RUU you end up using).
Click to expand...
Click to collapse
Thanks for your quick respond one more question .Lets suppose that i made the soff and the other things....when comes the time fore the ruu and the processes finish wil i have issues such as tampered, and the other warning notification listed in this forum?
Anoubis282 said:
Thanks for your quick respond one more question .Lets suppose that i made the soff and the other things....when comes the time fore the ruu and the processes finish wil i have issues such as tampered, and the other warning notification listed in this forum?
Click to expand...
Click to collapse
Once you have s-off, you can remove TAMPERED using revone or http://forum.xda-developers.com/showthread.php?t=2477792
and you can even LOCK (as opposed to RELOCKED) using revone or http://forum.xda-developers.com/showthread.php?t=2475914
and once you run the official RUU (exe) even the red text "this is a development device bla bla bla" should go away.
Hey guys I convert my phone to GPE and now I want my phone back to sense but I want keep the bootloader unlock and s off to be able to install twrp and custom roms can you guys explain me the step I have to follow to do that BTW my hboot before gpe was 1.57 and now is 1.54 thanks in advance
mruizco said:
Hey guys I convert my phone to GPE and now I want my phone back to sense but I want keep the bootloader unlock and s off to be able to install twrp and custom roms can you guys explain me the step I have to follow to do that BTW my hboot before gpe was 1.57 and now is 1.54 thanks in advance
Click to expand...
Click to collapse
use the MID change tool also change your CID to match what ever RUU you want to use. flash the RUU and your back to stock. DO Not Lock Your BOOTLOADER
MID_Change_1.01.zip
https://www.androidfilehost.com/?fid=23501681358538634
fastboot oem writecid 11111111
or fastboot oem writecid HTC__001
http://www.androidruu.com/index.php?developer=M7
Will flashing an RUU file in any way remove the S-OFF or SIM unlock I have on my M7? I also changed the CID to the GPe CID, will that change?
will54880 said:
Will flashing an RUU file in any way remove the S-OFF or SIM unlock I have on my M7? I also changed the CID to the GPe CID, will that change?
Click to expand...
Click to collapse
No RUU, will not change S-OFF or anything else.
will54880 said:
I also changed the CID to the GPe CID, will that change?
Click to expand...
Click to collapse
You may need to change CID to whatever RUU you want to flash, if you get CID error.
Okay, I just updated the CID to the Super CID. Now can I flash any RUU without issues?
will54880 said:
Okay, I just updated the CID to the Super CID. Now can I flash any RUU without issues?
Click to expand...
Click to collapse
CID and MID must match your RUU version. If CID doesn't match, you'll not be able to flash the RUU. If CID is superCID, you'll be able to flash it but you'll not get ota update on some versions so better to use the real CID for that RUU.
If MID doesn't match, you'll be able to flash the RUU but you will not be able to install ota updates (you'll get the "variant system error")
So in example:
if you want to use a WWE ruu (x.xx.401.x) use CID HTC__001 and MID PN0710000
If you want to use a GPE RUU (x.xx.1700.x) use CID GOOGL01 and MID PN0712000
If you want to use a Dev edition ruu (x.xx.1540.x) use CID BS_US001 and MID PN0712000
I tried using the Dev edition Cid and mid numbers, and relocked the boot loader and still got a 155 error code, meaning the ruu didn't match the codes.
Sent from my XT1095 using XDA Free mobile app