Related
As some of you may have found out i-mate launched its FINAL bluetooth patch yesterday only to withdraw it this morning.
Well this afternoon (my time GMT+3) they launched it again. Knowing that quite a few of you folks are NOT members of clubimate and would like to get the patch, I've downloaded them (as there are five flavors of them depending on your which ROM you are using; WWE, FRA, PTB, ITA and SPA)
Device Support - Bluetooth Patch # 2 for i-mate™ PDA2k
i-mate™ is aware of the problems being experienced with the i-mate™ PDA2k Bluetooth. This is the second patch which will improve the bonding between the i-mate™ PDA2k and other devices. With this patch the bonding between the i-mate™ PDA2k and Bluetooth headsets will be more robust, after the PDA2k has entered Power Save (Sleep) Mode. Customers have previously observed that:
- when the i-mate™ PDA2k enters Sleep Mode for a period of time, any in-coming voice call alert is not relayed via the Bluetooth link to the Bluetooth headset, so no audible alert is heard.
- when the i-mate™ PDA2k is bonded to a Bluetooth headset and has entered Sleep Mode, the device will periodically wake-up while in an idle state, without prompting by the customer, leading to unnecessary power drain of the battery.
The patch does not correct the beaming problem between devices using the Brodcomm Bluetooth stack, like the i-mate™ PDA2k, and devices using the Microsoft Bluetooth stack. We are still working on a resolution to this issue. Some Jabra BT250 headsets will also still have audio quality issues and we recommend contacting Jabra for a solution.
The correct patch to install on your device can be determined by tapping Start > Settings > System > Device Information and checking the ROM version suffix, eg x.yy.zzz WWE.
Click here to select the patch appropriate for English devices and Arabic devices and download "OEM_WWE_122_008.sa.CAB" this file is approximately 3.8 Mb in size. Once the cab file installs please soft reset the device to complete the installation.
Click here to select the patch appropriate for the ITA language on your device and download "OEM_ITA_122_011.sa.CAB" this file is approximately 4.0 Mb in size. Once the cab file installs please soft reset the device to complete the installation.
Click here to select the patch appropriate for the PTB language on your device and download "OEM_PTB_122_014.sa.CAB" this file is approximately 4.0 Mb in size. Once the cab file installs please soft reset the device to complete the installation.
Click here to select the patch appropriate for the ESN language on your device and download "OEM_SPA_122_012.sa.CAB" this file is approximately 4.0 Mb in size. Once the cab file installs please soft reset the device to complete the installation.
Click here to select the patch appropriate for the FRE language on your device and download "OEM_FRA_122_009.sa.CAB" this file is approximately 4.0 Mb in size. Once the cab file installs please soft reset the device to complete the installation.
Click to expand...
Click to collapse
Please click on the Click here in the quote above to get the files as per your needs. No fear they are hosted on my server and you don't have to be a member of clubimate to get them.
Bluetooth version on the PDA2K
hey
downloaded the lastest version of the bluetooth patch from i-mate guess what.
The first update they did they upgraded the stac from build 2500 to buid 3500.
Now with the new version they have gone back to version build 3000.
Now he is the problem bluetooth driver still insufficient drivers with both of the stacks.
With stack 3500 when I connect to my Parrot 3300 bluetooth in the car it works fine I even get the network signal saying ok.
Now when I upgraded to the new vesrion which is build 3000 when I connect to the Parrot bluetooth car kit the network signal is not shown anymore so what the hell is I-mate do can they just release the new version or not.
My brother has a Qtek 9090 his upgraded to the new rom he get the license has expired on the Italian version what a joke.
Hows fault is this CD or Broadcom the makers of the bluetooth drivers.
I would like to known so I can pester the right people.
Thanks
Gigino
help!
Help! i´ve installed this "OEM_WWE_122_008.sa.CAB" and my today screen is all messed up! i´ve already done several soft resets but the screen continues all messed up
i can put this in XDA2 or qtek 2020
So which stack does this one up(down)grade it to? I currently have 3500 with no problems, I don't really want to install this one and find out its no good... please help!
sacaman said:
i can put this in XDA2 or qtek 2020
Click to expand...
Click to collapse
I don't belive so, it is for the PDA2K/XDAIIs/MDAIII/Qtek 9090
raiderz said:
So which stack does this one up(down)grade it to? I currently have 3500 with no problems, I don't really want to install this one and find out its no good... please help!
Click to expand...
Click to collapse
If its working don't change it, I perfer the 3500 rather than the 3000 'cuse it works better with my Jabra 100
Re: help!
Vega said:
Help! i´ve installed this "OEM_WWE_122_008.sa.CAB" and my today screen is all messed up! i´ve already done several soft resets but the screen continues all messed up
Click to expand...
Click to collapse
Just after the setup, I had exactly the issues on my QTEK9090. Go in the parameters -> Today and change the theme. After this, you shouldn't have any more screen problem. After a short test, it seems the Bluetooth problems with my Jabra 200 fixed! Good luck
thanks...
Thanks, A320!
MDA III Warning
Just installed the Bluetooth patch on my MDA III and was presented with a completely black screen after Soft Reset. The only way around this was to Hard Reset. Yet to test the performance of the patch, but thought I would pass on the warning.
Had same problem on MDAII (black screen after reset - hard reset to cure) so am using previous patch
hi all
please i wanna help .. im in deep trouble whan i was tryin to upgread my PDA2K the screen become black and word Serial v2.06 or USB v2.06 is in the screen... i tried to hard rest but there was no response.. the screen now is empty and i dont have any information to back it again!!! please any 1 here can help me
but where they on clubimate :?:
there only last ROM. Has not understood humour. :shock:
Could someone upload these patches to our xda-developers ftp server under the blueangel directory. There should be a bluetooth patches directory somewhere there......
Thanks
All you should need to do is remove it from the cradle,then put it back in the cradle and restart the upgrade again. It should start to run again.
If that doesn't work,there are a couple of other things you can try.
Anonymous said:
hi all
please i wanna help .. im in deep trouble whan i was tryin to upgread my PDA2K the screen become black and word Serial v2.06 or USB v2.06 is in the screen... i tried to hard rest but there was no response.. the screen now is empty and i dont have any information to back it again!!! please any 1 here can help me
Click to expand...
Click to collapse
i can't download OEM_ITA_122_011.sa.CAB
where i can find it?
10x
links are dead. Please PLEASE re-upload!!
cannot download WWE version
xda IIs users
Can somebody confirm that it works for XDA IIs please? cheers
Resurrecting DEAD threads from December 2004 will only serve to confuse the unwary! If you NEED this patch, go to the iMate website, register your phone and download it. *sigh* FYI: The patch has been incorporated into the WM2003 ROMs released since.
Tuatara ,
Is this patch incoorperated in Helmi WM5 Rom ? If not, any effect if i install this patch into BA Helmi WM5 ?
Thanks!
After upgrading to 1.40, connecting to GPRS is hit or miss. When the problem occures it is normaly after the GPRS connection has been disconnected for a while, then when connecting again, I get the error "Cannot Connect". The only way out of this is to soft reset or turn ON then OFF "flight mode" (restart radio). The real problem in troubleshooting this issue is, I can not make it happen on a consistant basis, in fact, I can not duplicate it at all (it happens when it wants to). If you also have this issue, please offer any info you have on WHEN it happens or sequence of events that makes it happen.
Problem: "Cannot Connect" error when connecting to GPRS (all connection settings are correct).
When: ?????
Work around: restart radio
Note: This is not the same problem as "red phone button disconnects GPRS" ("Flags2") as discussed in http://forum.xda-developers.com/viewtopic.php?t=21972&sid=ff63b7f3db5fceffff1cd54fe61ffd27
the same for me!!
don't know why!!!
Does it seem to happen after a couple of hours after a soft reset?
Also, I have noticed turning flight mode ON then OFF only works for the next connection, after that I get the "Cannot Connect" error. A soft reset may work for several connect/disconnect cycles before it craps out.
Please post when it happens for you.
Got the same for a while now. Started to occur indeed after installing 1.40. My use is quite simple: an hour in the morning and an hour in the evening; in the evening it won't connect; soft reset and the thing goes again.
Did not found a woraround yet but will keep trying and share it with you if so.
XdaIIi - Cannot Connect GPRS
My XdaIIi is also giving the same problem. Turning Flight mode on/off gives some relief; buy only temporary. Compared to soft rest, this is far better. Why O2 is not providing any solution.
nraj
India
Norwegian devices with the 1.40 ROM is also having this problem!
Oystein
This seems to be the fix!!!!
efjay
Posted: Thu Jun 16, 2005 08:17
--------------------------------------------------------------------------------
I posted this before, I had the same problem with GPRS not reconnecting. Now i am able to use GPRS without any problem. My solution was to downgrade my caller id version to 1.20 build 17957. When i first upgraded to AKU_RC 20 was when i first had the problem, tried the later version RC21 and still didnt work. I tried this several times, only the caller id version being changed produced the problem. Try that and see if it works for you
_________________
Rom version 1.40 WWE
Radio 1.12
Ext Rom 1.40.147 (Cooked)
ftp://xda:[email protected]/BlueAngel/CAB_Files/Caller ID/IA_CallerID_1.20_WWE.CAB
Thanks to efjay!!!!!!!!!!!
What is the best way to update the Caller_ID cab? When I update, it tells me that it is available in ROM. Can it be done without doing a hard reset i.e. re-installing all over again?
You have to move the following files from \windows directory to a temporary location before installing the cab.
CallerID.dll
DisplayCID.dll
IA_CID_StartUp.exe
IA_CID_StartUp.lnk (From /windows/startup)
IACIDSync.dll
iacontacts.dll
After re-installation, change all the dll files in the temporary location to txt file. Softreset. You can then delete these files in temporary location.
Hope this help.
Chris,
I tried what you suggested but I still get the message re file windows/ai???.dll is in ROM. I do not have any of these dlls in the windows directory or at startup.
Please let me know if you have other ideas. Thanks.
SK
You have to use gsfinder or resco explorer to see all system files.
Anybody else try this or the people who did it before today, Is it still working? I have the same issue. I just applied this fix, but it is too early to tell if it did anything...
thanks for the replies
It worked for me! Thanks very much to everybody who helped to discover and post this fix. It saved me from having to downgrade my entire rom, because I was cheesed off with having to do flight mode off/on every time I wanted to connect to the internet via cellular line, which I do often, because I've got an old Genie SIM with free WAP (not GPRS).
I found the instructions easy to follow, and I didn't even need to use gsfinder or resco explorer - I just set File Explorer to Show All Files.
Cheers,
John
_____________________
I-mate PDA2k Model No PH20B
Rom 1.40.00 WWE from club-imate
Radio 1.12.00
Protocol 1337.42
ExtROM 1.40.176 WWE
BT Build 3990
Network: O2 UK
From with files in ROM
Next time install safemode, then install your updates in safemode.
Cheers!
This fix has worked great for me (xda IIi ROM 1.11.00 Radio 1.00.00 ExtROM 1.11.923). When prompted that certain files are in ROM or in use, simply changing the file name of the files in question did the trick. For the first time in a very long time of using the XDA II and now the XDA IIi, I can reconnect to GPRS without a hitch.
Same Problem Here. I am going to try the Fix now
Moving to caller id version to 1.20 build 17957 worked great for me. No more GPRS cut outs at all.
Working Good Here. even the Wifi reconnects very very Nice THank you
Problem solved!!, This upgrade works great, thanks!!!
hi,
i was searching for about hour and didnt find any .cab witch fix gprs problem on wm6 so i ask you.... how to fix it?
cheers
blah, i simply inatll another, diffrence rom.
(it help xd)
cheers
Hi,
Yesterday i finally brought a HTC TYTN2 (Kaiser) it is used for 3 months.
I noticed that the keyboard backlight is not w0rking
I ckecked & tried with unchecking the (Enable keyboard backlight auto sensor in Settings > buttons) but nothing
I also hard reseted my device, and it is still no keyboard backlight w0rking.
Can you please help ! Thank you in advance !
Yesterday i upgraded to
WM 6.1 3.28.405.0 WWE
Radio 1.65.16.25
OFFICIAL HTC TYTN2 ROM !(downloaded from the Kaiser FTP section)
But still no keyboard Backlight.
Before that i was with the stock wm 6.0 Kaiser ROM that came with the device, and after i upgraded to this one i saw that the call durations are still the same (so that means that the new ROM did not entirely reset the device)
Do you think that if i unlock and upgrade to some custom xda ROM will let the keyboard lighting up ?
Please help!
Any suggestions
OK guys, any suggestions ? I must ask in the "Wizard" section in order to get some help for my TYTN 2 ?
Everybody is kind over there and helps with everything!
I called the HTC service, they told me that they must send the device to another country to fix it, because here they dont have the rights to open it, and it will take about 1 month !
Please HELP !
HELP !!!
PLease HELP !
Is there a fix action for this? I have the same problem and it's driving me crazy! None of the buttons on my phone light up even when the phone is ringing.
Hello guys,
I've read for a very long time this forum, and now is the time to make my entrance with a question
I have a HTC Touch Diamond bought second hand. When i had the original ROM(I think it was original) the FM radio didn't worked, the application started but there was no signal, just that sound, and only in one earpiece. The hands-free are ok, in WMP both work. Right now i have Gen.Y D2 R4.3 ROM and 1.13.25.24 Radio and still the same problem
Can you help me make this running? Thanks in advance.
P.S.- I've searched the forum and i know about the "solution" with registry editor and deleting the keys. I've done that, deleted even the entire folder and still not working.
Edit - C'mon ...nobody knows?