Does anybody know how to config my Blue Angel to play mp3's through my plantronics 510???
Mike Braeuer
Which ROM are you using? Some of them have the capability, some don't... some can have it added, and some can't...
If you provide a little more info then someone will be able to help
Not possible, as far as I know.
The BA can handle it, your headset can't. You can install the A2DP bluetooth profile (needed to stream music via Bluetooth) on your device, but you would still need a (stereo) headset that supports A2DP.
Other than that, I doubt you'd get much pleasure listening to mono music through one ear on a little speaker that's built for cell phone conversations...
If you'd like to listen to music wirelessly, there's a number of bluetooth headsets that support A2DP, all of them stereo and not too expensive.
Related
Hi folks!
Is there some kind of step by step manual how to get to a working solution for the well known BlueAngel Problem with it's headset connections?
I found a thread talking about some registry tweaks, but that only enables the menu option to send the sounds to the headset, but finally doesn't produce any sounds...
What I want to have is the instructions, given by the Navigon Mobile Navigator 5 beeing transferred to a bluetooth device (a parrot free speach device or a logitech headset).
I am already running ROM 1.4 and tried all various BT versions, but nothing worked..
Thanks for your help,
Balu
err.. I am looking for using bluetooth headset to listen mp3 as well, any help and suggestions? :wink:
im trying to figure out how to do that aswell, (listen to media player using bluetooth on my SVP m2000)
me too is there any idea pls
same
You can listen mp3s if your headset supports advanced audio distribution profile and you have PDA2K_BroadcomCorp_BTUpdate.cab installed. But if your "advanced" headset does not support old profiles - you would not be able to use it to listen phone calls.
You CANNOT listen MP3s on normal headsets that support headset and hansdfree profiles. To use these headsets you have to sell PDA2K and buy PDA2.
mamaich said:
You can listen mp3s if your headset supports advanced audio distribution profile and you have PDA2K_BroadcomCorp_BTUpdate.cab installed. But if your "advanced" headset does not support old profiles - you would not be able to use it to listen phone calls.
You CANNOT listen MP3s on normal headsets that support headset and hansdfree profiles. To use these headsets you have to sell PDA2K and buy PDA2.
Click to expand...
Click to collapse
Can you please provide the list of BT headsets (with make / model numbers) that supports this "advanced audio distribution profile"
ht820 does the job!
I have Motorola HT820 on Orange M2000.
The HT820 supports Hands-Free and High Quality Audio profiles and you can playback audio in stereo via the headphones.
I upgraded the BT stack to 3900 and radio to 1.13 and added the extra profiles (instructions are in the Wiki), and it appears to work as both .
When the phone rings, WMP pauses and the left headset button answers the phone. Once you finish the call and hang up, WMP starts playback again.
The only problem that I still have is with intermittent dropout of the High Quality Audio. Anyone got any clues on curing this?
Got mine for around £60 UK sterling.
Is this an hardware limitation? Is this a ROM limitation? BT stack problem?
GSM phone preempting BT handfree?
If not HW, can we expect an upcoming solution to this?
Or, the only "hard" workaround is to plug a BT adapter (like Jabra A210) to redirect mike/spkr, and to desactivate BA BT.
Christmas tree, like.
Re: ht820 does the job!
woodrjh said:
I have Motorola HT820 on Orange M2000.
The HT820 supports Hands-Free and High Quality Audio profiles and you can playback audio in stereo via the headphones.
Click to expand...
Click to collapse
Thanks for the Info.... does the HT850 also supports MP3 playback with BT???????????
have a look at these (even though cant solve the prob on BA)
http://www.itechdynamic.com/html/border22.htm
and this
http://answers.google.com/answers/threadview?id=496339
you might wanna have a look here
http://forum.xda-developers.com/viewtopic.php?p=144425#144425
Registry
Hi again.
So, we didn't really find a solution yet?
I once read something about a little change to the registry, so that a second profile for the normal BT Headset appears.
I searched but I can't find it again.
does anyone know which post I mean?
If so, can you give me a link to that, because I believe that is the right way to solve the problem...
the key is if your source (pda or notebook) is running BT audio gateway. centrino notebooks supports audio gateway. I have a Jabra BT800 and listens to MP3s played from an HP DV1000 notebook but cannot have it working through my XDA II mini (the latter does not support BT audio gateway)
you might find this helpful => http://msdn.microsoft.com/library/d...html/wce50conaudiogatewayregistrysettings.asp
Hi! I have a qtek 9090 and I'm going crazy on this... Is it possible to listen to music on the BT headset (actually a Motorola H350), or is that supposed to be used only to receive calls? Are there any settings I can change, or does it depend on this specific headset? Thanks!
BA works fine with A2DP profile (stere hi fi audio BT profile), but usually not with base firmware. I tried to use it in WM2003 with BT patches and HP headset, but it works really fine with wm5 from helmi with widcomm stack. Now I use it with Plantronics Pulsar 590 - watching movies is quite nice in TCPMP. Anyway you have to remember about few limitations of this technology:
1. BT in BA has very limited range - from backpack to headset sometimes might be too far.
2. While watching movies, remember about short delay (up to 200ms) needed to compress, send and uncompress the sound.
3. in most headsets you have additional buttons for remote control (AVRCP profile), but it works well only in WMP - havent noticed any other software, that works fine with this option, anyway I havent made in-depth testing.
4. Quality is limited by compression algorithm used in A2DP profile, but for most people it is acceptable (I prefer Koss Porta Pro wired headset for music)
It is possible to make your Qtek 9090 play music via Bluetooth, whether you're using WM2003 or WM5, but you can't do it on a mono (one ear) headset like yours. Mono headsets aren't made for listening to music so they don't support the Bluetooth stereo profile.
If you're thinking about getting a stereo headset, by all means go ahead, but consider some of jakubd's remarks; especially the first one. Regarding the third remark: Conduits Pocket Player supports AVRCP as well and is a great music player!
For some info on how to install the Bluetooth stereo profile, see my posts in this thread: http://forum.xda-developers.com/showthread.php?t=258457
So...
...does that mean there is no way to use a BT mono headset in the same way of a wired mono headset, i.e. to listen to anything that goes on on your PPC (music, movies, games, calls... whatever, no matter the quality of the sound)???
As far as I know, there isn't...
bmarzano said:
...does that mean there is no way to use a BT mono headset in the same way of a wired mono headset, i.e. to listen to anything that goes on on your PPC (music, movies, games, calls... whatever, no matter the quality of the sound)???
Click to expand...
Click to collapse
I have tryed avery possible BT software to redirect mp3 sound to a mono headset (Motorola H605 with T-Mobile MDAIII, Custom WM5 AKU 3.2) and my conclusion is that it is impossible, until someone makes some kind of hack for mono devices to be emulated as stereo.... as far as i know there is no such hack
I was checking out the GPS Test program on the Chartcross Ltd. site and noticed this product:
http://chartcross.co.uk/products/WM00004_details.asp
They claim that you can use it to play MP3's etc...over a Bluetooth headset. Has anyone tried using this product to play music on the stereo in your car?
I would prefer to connect the phone to the car directly like you can with an iPod, but I have not seen any software support for that. My car has a 6 disc changer that uses the same port the iPod jack uses so unless I want to tear apart the dash I am stuck.
I think everybody that uses a bt headset has this program.
On Kaiser use this, BTaudio Toggle, it's free and works great.
Isn't that Kaiser support A2DP natively w/o any extra software? I don't have any issue to listen to music using my BT stereo headset or bluetooth head unit.
jackleung said:
Isn't that Kaiser support A2DP natively w/o any extra software? I don't have any issue to listen to music using my BT stereo headset or bluetooth head unit.
Click to expand...
Click to collapse
A2DP has nothing to do with mono audio redirection. This thread is on the latter, not on A2DP.
I've long ago elaborated on this subject at, say, http://wiki.xda-developers.com/inde...t using traditional (mono) Bluetooth headsets
Is there a way to listen to radio or anything audio threw my bluetooth headset? It's just mono. I was able to do so with my 8125 when I had it. Like have the set as wireless stero enabled with my bluetooth headset. I have the motorola HS850
thanks much
maybe -- try this
Remove the bluetooth headphones from the Tytn bluetooth partnerships, then re-pair it to the phone.
I know this is too simple a solution for this site, but I had a problem with my S9 headphones playing only in one ear, and I tried this and it works for stereo music. (I still haven't found a solution to mono-programs such as my audio-books, but I'm still looking...)
There's a BT audio CAB file here on the forum which enables basic sound through a mono headset. Keep searching, you'll find it.
Here is "BTaudio toggle", a simple program to send all audio out thru the BT earpiece.
Here's directions on how to stream radio stations on Kaiser;
http://forum.xda-developers.com/showthread.php?t=350675
Hey people. Having a bit of a problem here. I've got a single ear bluetooth headset that i'm trying to route audio to.
Telephone calls work fine but I need the ability to route notification / confirmation sounds and raw music streams (basically all audio) to the headset.
I've tried a few solutions (VJvolubilis, bluemusic-etc) but every time I enable the audio gateway, I just get a hissing sound that plays over the headset, while all other sound is routed thru my hima.
I was thinking about configging the headset in the registry to support wireless stereo but wouldn't have a clue what settings to enter.
Could someone provide some advice (or a regkey for wireless stereo) on how I could go about routing all standard audio?
Oh BTW, i've tried the broadcomm stack for hima. Apparently the wavedev.dll file included doesn't know how to either recognise the widcomm stack, or work with it to route audio.
Can someone with a wireless stereo headset post a reg backup of their HKLM/Software/Microsoft/Bluetooth directory?
Also anyone with working streaming standard audio to a single ear BT headset, please post both your audioGW.dll & wavedev.dll from \Windows.
I would think that your BT headset does not support the A2DP proflie and therefore cannot be used to stream BT audio.
My stereo BT headphone works just fine using the MS BT stack since WM 5.0 AKU 2.X
Sascha
SaBo, the headset is NOT a stereo BT headset. It's a single-ear handsfree headset (the apple bluetooth headset to be precise).
I know it WILL work with all routed audio because i've synced it with a friend's HP PDA that had a native BT stack and all audio (including mp3s and notifications) played thru the headset.
I'm not trying to enable A2DP, i'm trying to force the phone to route all audio thru the mono earphone of the headset.
Anyone else have any ideas?
As I know, it's impossible in himalaya because of technical reasons.
NxJay said:
I'm not trying to enable A2DP, i'm trying to force the phone to route all audio thru the mono earphone of the headset.
Click to expand...
Click to collapse
Afaik it's not possible on Himalaya.
You will need an A2DP Headset and it will work.
Sascha
I know for sure it can be done. I had other issue, but that was the point.
you have to change some registrity entry, a don't remeber which, as soon as i find it i'll post it for you.
Here is a hack: try it
http://forum.xda-developers.com/showthread.php?t=257415
http://foro.todopocketpc.com/showthread.php?t=128642
Andur, no luck on those 2 hacks.
Tried em both. Nothing happened.
The second hack, i enabled BTAudioOn.exe. All that happened was a hissing sound (kinda like background noise/static) started to play outta the headset, while all other sound kept playing outta my Hima.
Any other ideas? Or even better, any ways to fix the widcomm stack so i can use that to route audio? This MS stack is so useless.