ok...i got the error from upgrading from 2.17 hacked rom to the 2.26 official rom. tried to read whatever i can but looks like solutions were given for cingular ipl etc...
can someone help me out? when i run the official rom, it updates to 1% and then i get the nbf error. i tried to run loki but mda not recognized by my usb connection.
stuck now...please help!!!
actually, tried to run machinagod's RAPI unlocker..but MDA not recognized as connected...this was part of xelencin's 2.24 rom updater.
please help!!!
Hi,
you must provide more information if you want someone to help you.
First and most important: what does it mean your phone is stuck? Stuck where? Does the screen come on? Can you get the bootloader screen? (for the bootloader screen: hold the two keys on the right side of the device and press shortly the reset hole; if you see the three colors screen then you have the bootloader!)
bye
i get the screen with the 3 colors, and usb at bottom left. when i run the official t-mobile 2.26 update, the screen goes gray and there is a bar with % done. when that kicks in, i get 1% done then it stops. on my computer screen, i get the nbk error, saying the nbk file that i have is not for my phone.
i looked for fixes but all the fixes require activesync connections which i am unable to connect with. just fyi, when i plug in the usb cable to my laptop, i hear the *ding* for usb noting it is connected but the activesync connection is not available.
thanks in advance for your help.
-mike
m3m3 said:
i get the screen with the 3 colors, and usb at bottom left. when i run the official t-mobile 2.26 update, the screen goes gray and there is a bar with % done. when that kicks in, i get 1% done then it stops. on my computer screen, i get the nbk error, saying the nbk file that i have is not for my phone.
i looked for fixes but all the fixes require activesync connections which i am unable to connect with. just fyi, when i plug in the usb cable to my laptop, i hear the *ding* for usb noting it is connected but the activesync connection is not available.
thanks in advance for your help.
-mike
Click to expand...
Click to collapse
Before your battery goes flat i suggest you to re-install your old rom. Don't know why 2.26 is not working, maybe you downloaded a corrupted archive. To install your old rom it is not required that activesync sees your phone. Go in bootloader mode and flash your old rom back.
i dont think i downloaded a corrupted rom file because i downloaded it from 2 different places, one from Tmobile site directly from my tmobile account.
what bootloader program should i use? please advise and location to download...
thanks,
mike
m3m3 said:
i dont think i downloaded a corrupted rom file because i downloaded it from 2 different places, one from Tmobile site directly from my tmobile account.
what bootloader program should i use? please advise and location to download...
thanks,
mike
Click to expand...
Click to collapse
bootloader program??? There's no bootloader program!
What i'm trying to tell you is:
- Your phone is stuck for unknown reasons. In this state you cannot recharge your battery!
- Before the remaining battery charge becomes too few, reinstall your old rom (the one you had before trying 2.26)
- When your phone -with the old rom- will be working again, then you'll have all the time to investigate on the causes of this failure.
- Now hurry up and install the old rom before it's too late (unless you have a second wizard that you can use to recharge the batteries)
To install the old rom you must go to the three-colors screen (the bootloader), connect to USB (but activesync won't start!) and start the rom installer.
bye
risi,
sorry...how do i get to bootloader screen? is it the tricolor screen? has anyone had the same problem that i'm having, going from 2.17 hack to 2.26 official?
what program can i use to load my original rom with?
sorry for the semi-newbie questions...desperate to revive my MDA...
again, thanks.
-mike
m3m3 said:
risi,
sorry...how do i get to bootloader screen? is it the tricolor screen? has anyone had the same problem that i'm having, going from 2.17 hack to 2.26 official?
what program can i use to load my original rom with?
sorry for the semi-newbie questions...desperate to revive my MDA...
again, thanks.
-mike
Click to expand...
Click to collapse
to go to the bootloader screen you must keep pressed the two keys on the right side of the device and, while keeping them pressed, shortly press the reset button. the bootloader screen IS the three colors screen. when you get the bootloader screen, reinstall your previous rom (2.17).
i plugged the phone in the wall charger and the battery charged up all last night so i am not worried about the battery...
i just cannot figure out how to load the old rom i had.
i didnt bring the phone with me to work...i will try to reflash with old rom...for now...i am using my old hp 6315 (yikes! - remember the probs with this phone?? lol
m3m3 said:
i plugged the phone in the wall charger and the battery charged up all last night so i am not worried about the battery...
i just cannot figure out how to load the old rom i had.
Click to expand...
Click to collapse
to load the old rom you must:
- get to the bootloader screen (the three colors one)
- download the 2.17 rom's ,exe archive (download it from the same place you took it last time)
- connect the phone to USB (don't worry if activesync doesn't see it)
- start the rom .exe file
thanks risi...
hope i can get it back man...
m3m3 said:
thanks risi...
hope i can get it back man...
Click to expand...
Click to collapse
I hope so! About the problem you had with 2.26, i don't know why it happened. Is your phone a T-mob USA MDA? If it is not then you must CID unlock it before flashing a different operator's rom.
Bye
yes, it is a tmo usa mda...or i would think so since i bought it from a factory store (not an authorized dealer). anyway man...i will keep you posted...for now, using my trusty hp 6315. lol
Hello,
I have a similar problem. I updated my QTEK 9100
with a T- Mobile 2.24 ROM. Now I need to go back to the original QTEK Rom, namely RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship.exe, but after starting the upgrade process the program refuses to downgrade the device and says get a newer nbf file.
Is there a way to force a downgrade?
Many thanks in advance
Anais said:
Hello,
I have a similar problem. I updated my QTEK 9100
with a T- Mobile 2.24 ROM. Now I need to go back to the original QTEK Rom, namely RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship.exe, but after starting the upgrade process the program refuses to downgrade the device and says get a newer nbf file.
Is there a way to force a downgrade?
Many thanks in advance
Click to expand...
Click to collapse
Is your phone CID unlocked? If so, then you must download the wizard_upgrade_noid tool from the ftp server and use it to install the 'down'grade.
In details:
- be sure your phone has been CID unlocked (and is not a G4)
- download the wizard_upgrade_noid (i don't remember the name exactly) tool
- use winrar to extract the original qtek rom .exe archive
- copy the noid tool to the folder where you extracted the qtek rom
- run it
bye
Hello Risidoro,
At first thanks for your fast answer. Since I have a QTEK I don't beleve it's CID locked. How can I verify if the phone is CID locked? Is there a tool to check this?
I proceeded exactly as you advised. I used Winrar to extract the files and used the Wizard_RomUpgradeUtility_noid I downloaded from the ftp site.
Then I copied the nk.nbf file to the respective folder but the utility after having completed the initial 2 screens says:
ERROR [238] : FILE READ
The update utility cannot open the requested file. Please check your update utility.....
any ideas
Greetings
Hello,
Just some small updates: My phone has currently the Mr Clean 2.3 firmware loaded : IPL 2.24 SPL 2.24 GSM 02.25.11 and OS 2.24.10.1.
Previously I was using RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship.exe and had no problems. After upgrading to xelencin t-mobile based US rom I had trouble when making data transfers over GPRS. Then I decided to test Mr clean. Altough I data transmission has improved a bit it's still not so good as with my original RUU 2.17 release.
Unfortunately I am unable to revert to this version. Also having tried to downgrade using Faria's Custom downngrade file only the IPL was downgraded to 1.05 and the SPL file stayed to 2.24.
I tried then to reapply RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship.exe but I recieved the error message UPGRADE only.
Since apparently this is unstable I decided to reapply Mr Clean and now I have again IPL 2.24 SPL 2.24 GSM 02.25.11 and OS 2.24.10.1.
I suspect that the data problems are due to the fact that these new radio versions are not compatible with our provider. I live in Luxembourg so we use LUXGSM.
Is there a way how I can revert to my old 2.17 software.
Any coments are highly appreciated.
Greetings
Anais said:
Hello Risidoro,
At first thanks for your fast answer. Since I have a QTEK I don't beleve it's CID locked. How can I verify if the phone is CID locked? Is there a tool to check this?
I proceeded exactly as you advised. I used Winrar to extract the files and used the Wizard_RomUpgradeUtility_noid I downloaded from the ftp site.
Then I copied the nk.nbf file to the respective folder but the utility after having completed the initial 2 screens says:
ERROR [238] : FILE READ
The update utility cannot open the requested file. Please check your update utility.....
any ideas
Greetings
Click to expand...
Click to collapse
Hi Anais,
try flashing with the RUU (Rom Upgrade Utility) tools that you find in this thread: http://forum.xda-developers.com/viewtopic.php?t=56088
Download the archive RUU.rar and extract its content somewhere in your PC. Copy in the same location the nk.nbf from the rom and run the .exe.
bye
Related
I got now:
IPL, SPL: 1.03
GSM: 1.4.10.0
OS: 1.3.2.3
ROM versie: 1.3.2.3 NLD
Radioversie: 01.04.10
Can you tell me.. do i need to upgrade? What will be better when i upgrade?
With which ROM do i need to upgrade?
Please help.
Qtek ROM version 1.6.7.1
In my humble opinion; Qteks 1.6.7.1 ROM is the most stable ROM to date. Everything works perfectly for me with all my 3rd party software installed too!!
PS if you haven't already done so, you can totally unlock your phone from T-mobile by following the following instructions. Also do searches for the quted software (download them first):
mackaby007 said:
abgarman said:
hey mackaby007!
I wonder whether you had any problems during new rom installation...
I tried this ROM, but after the installation was finished, Etx_rom installed and system rebooted I got a "device locked message. illegal ROM, given only to customers who bought their wizard/qtek at ...[]" I had to go back thru several instals to restore my original ROM (which i never truely accomplished - i have no ability to change ring tones and assign them to different contacts)
Click to expand...
Click to collapse
Hey back at ya.
First download lokiwiz v2b. Don't use previous versions or you'll not get through this!!
Hard reset your device (not necessary, but it ensures you'll have no hassle with Activesync).
Done that? Good. Extract the lokiwiz v2b .zip folder and copy enablerapi.cab to your memory card or to 'My Documents' folder on your device. Then execute the 'enablerapi.cab'.
Done? Just switch off the device (power button; put it in standby mode).
If you have Activesync already installed, un-install it and re-install directly afterwards (ensure a brand new partnership).
Then when prompted by Activesync, plug in your USB cable PC-PPC and it should recognise as usual.
Then execute the lokiwiz.bat file (in the folder that was generated earlier when you extracted the lokiwiz02b.zip file) and when you see the MS Dos (black screen) choose the option CID Unlock (SuperCID) and wait for it to COMPLETELY finish. You'll know it's finished when your Wizard is re-booting. Plug out your USB cable at this stage.
Once re-booted and back into WM5, re-connect your cable and if all goes well it should re-connect to Active Sync (wait till it has finished syncing or says connected!).
Finally......double click the executable file, which should be:
RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
Hopefully it will now install the ROM without hiccups (about 10 minutes).
Hope this helps. let us know how you get on.
Click to expand...
Click to collapse
I searched the whole forum.. I i unlocked my Vario 15 minutes ago. Thanx a lot!!
Re: Qtek ROM version 1.6.7.1
Will the follwoing also work with the Cingular 8125. I haven't SIM unlocked it yet. Also, is a SIM unlock the same as a CID unlock. Is there tow different things that need to be unlocked. And which do I do first, if there are two things that I must unlock. Thanks for the help...and sorry if this questions has been answered before...
-OnImpulse-
mackaby007 said:
In my humble opinion; Qteks 1.6.7.1 ROM is the most stable ROM to date. Everything works perfectly for me with all my 3rd party software installed too!!
PS if you haven't already done so, you can totally unlock your phone from T-mobile by following the following instructions. Also do searches for the quted software (download them first):
mackaby007 said:
abgarman said:
hey mackaby007!
I wonder whether you had any problems during new rom installation...
I tried this ROM, but after the installation was finished, Etx_rom installed and system rebooted I got a "device locked message. illegal ROM, given only to customers who bought their wizard/qtek at ...[]" I had to go back thru several instals to restore my original ROM (which i never truely accomplished - i have no ability to change ring tones and assign them to different contacts)
Click to expand...
Click to collapse
Hey back at ya.
First download lokiwiz v2b. Don't use previous versions or you'll not get through this!!
Hard reset your device (not necessary, but it ensures you'll have no hassle with Activesync).
Done that? Good. Extract the lokiwiz v2b .zip folder and copy enablerapi.cab to your memory card or to 'My Documents' folder on your device. Then execute the 'enablerapi.cab'.
Done? Just switch off the device (power button; put it in standby mode).
If you have Activesync already installed, un-install it and re-install directly afterwards (ensure a brand new partnership).
Then when prompted by Activesync, plug in your USB cable PC-PPC and it should recognise as usual.
Then execute the lokiwiz.bat file (in the folder that was generated earlier when you extracted the lokiwiz02b.zip file) and when you see the MS Dos (black screen) choose the option CID Unlock (SuperCID) and wait for it to COMPLETELY finish. You'll know it's finished when your Wizard is re-booting. Plug out your USB cable at this stage.
Once re-booted and back into WM5, re-connect your cable and if all goes well it should re-connect to Active Sync (wait till it has finished syncing or says connected!).
Finally......double click the executable file, which should be:
RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
Hopefully it will now install the ROM without hiccups (about 10 minutes).
Hope this helps. let us know how you get on.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Re: Qtek ROM version 1.6.7.1
OnImpulse said:
Will the follwoing also work with the Cingular 8125. I haven't SIM unlocked it yet. Also, is a SIM unlock the same as a CID unlock.
Click to expand...
Click to collapse
I don't know if this will work with the 8125, but If under 'Start/Settings/System/Device Information/Identity' it says 'WIZA200', i would assume so, as it was created for the HTC Wizard, but I'm not sure.
As for totalyy unlocking your phone, YES it will. CID Unlock did it for me, but I'm not the developer of this software so am not in the best position to advise if it is suitable for anything else other than a Wizard.
Hope this helps.
I get te following message when I run lokiwiz.bat
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Click to expand...
Click to collapse
The device does not reboot and the ROM upgrade afterwards fails. Any tips?
hav0c said:
I get te following message when I run lokiwiz.bat
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Click to expand...
Click to collapse
The device does not reboot and the ROM upgrade afterwards fails. Any tips?
Click to expand...
Click to collapse
First download lokiwiz v2b. Don't use previous versions or you'll not get through this!!
ROM
When I double click on the new Rom, does it erase everything on the Vario (Programs) ?! Do I first have to sync and then put the new rom on it !?
what r the main diffrences between the roms ?
I have a T-Mobile Vario with a german rom and I'm thinking about putting the RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship or the
RUU_Prodigy_1060701_101_11310_QTEK_GER_Ship
on it, which one is better and again what r the differences between those two and the original ?
or is there even a better one !?
greetz
Absolutely 100% perfect working tutorial. CID unlock worked as did the new ROM. I too changed form MDA T-mobile NL version to Qtek WWE one.
Great tips. Thank you very much, you just saved me a few 100 euro's, and I got a device which is useful and faster.
I was upgrading my t-mobile 8150(?) the k-jam with the new windows mobile 6 and in the middle of it my comp crashed!! now i am stuck at the bootloader mode (3 colored screen) and when i try to redo it i get to 99% and get a 302 error message. i follow the instructions given but keeps going in circles. its a G3 so is my phone bricked or is there a way to save it? i've been looking at this site all day but am now just more confused. lol thanks for your help!
No your phone isn't bricked. As long as you can get into the bootloader screen you should be ok. What you need to do is flash an official carrier rom either tmobile 2.26 or wizard love rom after you that than you can reflash to wm6. look at the stickies in the wizard forums that is where you can find these roms.
Thanks for the info but seems my techno curse continues. I tried the wizard love rom but it was in a different language and whem i tried the tmobile 2.26 i got "error 274 connection." Any more suggestions? Again thanks soo much for an issue I'm sure has been posted here a thouand times.
This happens to me all the time. I always use the Cingular 2.25 rom, it works perfectly and I have an I-mate K-JAM. Then, do the WM6 upgrade, but ensure all of your Norton and Antivirus and background running apps are shut down. Good luck.
yes also take out your mini sd card if you have one. even though its in another language it will work. "AVANTI means next. so just keep hitting that and you will be fine.
hmm been trying to d/l the Cingular 2.25 rom but the link seems to have stoped working...
It;s aaaaaaaaaaaaaaalllllllllliiiiiiiiiiivvvvvvvvvvvvvvvvveeeeeeeeeeeeeeeee!!! for now lol Lets see what happens after i install wm6 I couldn't get the cingular rom but i had already dowbloaded the button rom i found here earlier and it worked like a dream!! quick and easy!! thank you all soooooo much!
hi all. one more little thing. after adding the new rom to get it back to life, now the numbers don't match so i can't upgrade to wm6. i have ipl 1.01 spl 2.26. advice?
flash to the tmo 2.26 or cingular 2.25...that will give you an IPL/SPL of 2.xx
then, you can flash to WM6
i want to delete this message. can't find a way to do it.
there's any other way to flash without usb cable?? sorry to bug in this thread but i lost my usb connection somehow and did a hard reset and still doesn't work. my phone charges. and no is not my computer cuz my wifes phone same as mine does sync i have a tmobile mda also known as the cingular 8125.
fallon75 said:
hi all. one more little thing. after adding the new rom to get it back to life, now the numbers don't match so i can't upgrade to wm6. i have ipl 1.01 spl 2.26. advice?
Click to expand...
Click to collapse
keep reflashing buttons rom until both ipl/spl are the same number. if they are different, then the flash didn't complete correctly. (it happens often, so it's kinda normal). just keep reflashing. after both ipl/spl are the same, then CID unlock and then update to an official carrier...then flash a wm6.
can anyone help me??
Check if "USB" displayed when in bootloader mode (Camera+reset) with Wizard connected to PC.
If so, you may try to flash another ROM through bootloader.
starkwong said:
Check if "USB" displayed when in bootloader mode (Camera+reset) with Wizard connected to PC.
If so, you may try to flash another ROM through bootloader.
Click to expand...
Click to collapse
it does shows but how can i flash?? it still won't connect o my pc. my pc doesn't recognize it. but it does recognize my wifes phone.
Try to run RUU straight with Wizard connected and running in bootloader mode
does anyone know why my imate kjame would give an error or Windows/autoconfig.exe doesnt exist.
i have tried a number or roms but the phone failed to upgrade to wm6. it then reverts back to the wm5 after encounting this error.
i have tried the CID unlock but there is no hope
can anyone please assist me urgently.
ghumanfly said:
does anyone know why my imate kjame would give an error or Windows/autoconfig.exe doesnt exist.
i have tried a number or roms but the phone failed to upgrade to wm6. it then reverts back to the wm5 after encounting this error.
i have tried the CID unlock but there is no hope
can anyone please assist me urgently.
Click to expand...
Click to collapse
We need more information than this if you want help...
1. Wireless Carrier?
2. IPL/SPL?
3. Roms tried?
4. How have you been trying to flash roms? What method of flashing?
5. What is your PC's operating system(your computer, not PPC)
EDIT>> Answer these questions for me and I will try my best to help you tomorrow some time. I live in Cental US so I might not get your messages until later tomorrow your time but I will respond in the morning tomorrow.
info
forgive me if there is anything that i dont get correct....
1. Wireless Carrier?
i am assuming that this is the service provider and that is vodacome for me. it is a not the same as vodafone however they have a JV running
2. IPL/SPL?
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
3. Roms tried?
i tried one of the ROMs that my IT team provided to me. i have attached the rom.
i also tried Octvio's rom (ROM_Wizard_OCTAIVOI_OS_1908_v4[1].8_PP6MB)
i also tried CB-AIRAF
4. How have you been trying to flash roms? What method of flashing?
here i loaded the EnableRapi cab file and ran it on my wizard. then i ran the lokiwiz.bat file on my machine. i didnt see any error there so i take it that it ran fine.
5. What is your PC's operating system(your computer, not PPC)
i am running XP SP2 on my notebook.
couldnt attach any of the files... not sure what was causing the problem
ghumanfly said:
forgive me if there is anything that i dont get correct....
1. Wireless Carrier?
i am assuming that this is the service provider and that is vodacome for me. it is a not the same as vodafone however they have a JV running
2. IPL/SPL?
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
3. Roms tried?
i tried one of the ROMs that my IT team provided to me. i have attached the rom.
i also tried Octvio's rom (ROM_Wizard_OCTAIVOI_OS_1908_v4[1].8_PP6MB)
i also tried CB-AIRAF
4. How have you been trying to flash roms? What method of flashing?
here i loaded the EnableRapi cab file and ran it on my wizard. then i ran the lokiwiz.bat file on my machine. i didnt see any error there so i take it that it ran fine.
5. What is your PC's operating system(your computer, not PPC)
i am running XP SP2 on my notebook.
Click to expand...
Click to collapse
Ok I see that you have a G4. Lokiwiz is a waste of your time since you have a G4.
Here is what you need to do:
Because you have a G4, you can't just flash a rom because of the DOC chip.
There are 3 ways I know of to flash a G4.
1. Download shelltools - install enablerapi.cab and cert_spcs.cab and reboot your device. connect with activesync and place the nk.nbf file of the rom of your choice in the shelltools directory and run shelltools and follow the directions in the readme. If you do it correctly, you will end up successfully flashing your device.
Link: http://forum.xda-developers.com/showthread.php?t=293480
2. Download SoftSPL and place the nk.nbf file of your choice in the RUU folder included and run SoftSPL and it is fully automated. It will call the RUU and your device will be flashed in about 7 minutes.
Link: http://forum.xda-developers.com/showthread.php?t=329147
3. Use the HardSPL(CID UNLOCK) and unlock your device prior to flashing. This will allow you to just flash roms at your leisure with no problems whatsoever from now on BUT it is still in developement so use at your own risk.
LINKS: http://forum.xda-developers.com/showthread.php?t=332330
http://forum.xda-developers.com/showthread.php?t=332320
I hope this helps you. I personally have a G3 so this is not my area of expertise...
wm6
thanks alot me. it upgraded properly
i am trying get all add ons.
ghumanfly said:
thanks alot me. it upgraded properly
i am trying get all add ons.
Click to expand...
Click to collapse
No problem... Now you're at the fun part. Add ons!!
add ons
when it comes to add ons,I was reading on the Rom Kitchen thread and and I couldn't see much more that could be added to the rom that Faris V5's nbf file.it seems to be one of thee most comprehensive files that I have come across. the only issue is that it runs a bit slow but it cool.I might just need to do some memory management.
other than that I would recommend the file.
do you have any other recommendations?
have u seen the article that microsoft wants xda dev... to remove all of its roms from the website?
ghumanfly said:
when it comes to add ons,I was reading on the Rom Kitchen thread and and I couldn't see much more that could be added to the rom that Faris V5's nbf file.it seems to be one of thee most comprehensive files that I have come across. the only issue is that it runs a bit slow but it cool.I might just need to do some memory management.
other than that I would recommend the file.
do you have any other recommendations?
have u seen the article that microsoft wants xda dev... to remove all of its roms from the website?
Click to expand...
Click to collapse
I personally use the TNT.1437 TouchFlo and TNT.1437 Professional+HTC Home roms personally modified to have a 10MB page pool. They are quite fast and are almost 100% stable with only minor bugs that are barely noticible...
Here is a link to the 10MB Version of TNT.1437 Touchflo
http://www.megaupload.com/?d=TM2N1W2R
Here is a link to the 10MB Version of TNT.1437 Prof+HTC Home
http://www.megaupload.com/?d=RZFKY868
If you would like, I can speed up the performance of faria's rom also and then upload the new nk.nbf file for you to try. Just let me know.
speed
Yes, please.... speed it up for me. if there are any other applications (add ons) that you feel should be added to the nbf file then please add them.
i have already shared the nbf file with many guys at work. we would be grateful if you can assist.
one last thing, i noticed that there is a 3G icon under the comms manager. one of the guys said that we should not have any issues accessing 3G even if the phone didnt come with it. is it possible to use 3G on these phones?
cmd> prompt when i use mtty
--------------------------------------------------------------------------------
hi,
i;ve managed 2 screw up my wizard
everything was going well
i flased sucessfully 2 three different roms..
then i flased the tnt latest beta rom
i worked fine
i reflased the same rom by mistake as i wanted 2 flash a diferent rom
this is when the problem sarted..
the upgrade got stuck at 66%
i waited for 15 minutes..
then i disconnected the usb from the phone & since then the phones stuck in the bootloader..
i've used mty
this is where i'm in unknown teritory..
it gives me cmd> prompt
no USB prompt..
any sugestions??
ok, some urgent help needed, yesterday ok, today will not start. only get as far as, 'smart mobility' R1.27.12.32 G22.45.88.07H D 1.56.00.00
phone is standard WM6 HTC. i have the 6.1 image for upgrading and tried to load using SD card, i get past tri colour screen, then loading, then checking then 'not allowed' and back to tri colour. it says KAIS130, SPL-1.93.000 CPLD-8. what?next
any help appreciated guys......
gazzacbr said:
ok, some urgent help needed, yesterday ok, today will not start. only get as far as, 'smart mobility' R1.27.12.32 G22.45.88.07H D 1.56.00.00
phone is standard WM6 HTC. i have the 6.1 image for upgrading and tried to load using SD card, i get past tri colour screen, then loading, then checking then 'not allowed' and back to tri colour. it says KAIS130, SPL-1.93.000 CPLD-8. what?next
any help appreciated guys......
Click to expand...
Click to collapse
To Flash a ROM you'll most likley need Hard SPL
Follow the "Getting Started" Link in my Sig.
If you cannot get WM to boot, you'll need to re-flash your orginal carriers ROM.
Ta
Dave
thanks for quick reply DaveShaw. fell at the first though, site for 'Cmonex's HardSPL 3.29SD' is blocked here in UAE, dont know why. are there any other links?
gazzacbr said:
thanks for quick reply DaveShaw. fell at the first though, site for 'Cmonex's HardSPL 3.29SD' is blocked here in UAE, dont know why. are there any other links?
Click to expand...
Click to collapse
You shouldn't be using cmonex's SD method the first time round. It is for upgrading only.
I have downloaded the package from point 2 (you should follow the USB method in post 3, NOT the SD set) and have upload it onto my site, please let me know when you are done with it.
http://taeguk.co.uk/xda/HardSPL and CidUnlocker.zip
Ta
Dave
ok, thanks DaveShaw, i have downloaded those files. the method in step 2 involves copying the jump progs to the device memory, which i do not have access to as it will not start. can i just copy to the sd card? thats why i was trying to flash a standard rom. i need a solution that will work just from the card. will the RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship.rar load using what i have on my phone now? i assume that the spl gets replaced when i upgrade to 6.1 with htc ruu. i can try anything as i have nothing to lose now (do i?)
gazzacbr said:
ok, thanks DaveShaw, i have downloaded those files. the method in step 2 involves copying the jump progs to the device memory, which i do not have access to as it will not start. can i just copy to the sd card? thats why i was trying to flash a standard rom. i need a solution that will work just from the card. will the RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship.rar load using what i have on my phone now? i assume that the spl gets replaced when i upgrade to 6.1 with htc ruu. i can try anything as i have nothing to lose now (do i?)
Click to expand...
Click to collapse
Enter your bootloader and try flashing any ROM supplied by your carrier to get into Windows Mobile.
What screen do you get stuck on? If it is the tri color screen check out the link in my signature.
Ta
Dave
Hi again, i am not actually 'stuck' on the screen as i can get into the loader, its just that i get the message saying that the (newer) rom will not load. i am extending my (c)rapidshare as free will not let me down load the 'standard' rom, then i will try that (just had to re-initialise my paypal and the passwords are on eWallet the phone, so ive reloaded the eWallet on my pc and ....so it goes on zzzzzzzzzz its funny how these things spiral down - not).
is there any way to update the spl only from the sd card?
gazzacbr said:
Hi again, i am not actually 'stuck' on the screen as i can get into the loader, its just that i get the message saying that the (newer) rom will not load. i am extending my (c)rapidshare as free will not let me down load the 'standard' rom, then i will try that (just had to re-initialise my paypal and the passwords are on eWallet the phone, so ive reloaded the eWallet on my pc and ....so it goes on zzzzzzzzzz its funny how these things spiral down - not).
is there any way to update the spl only from the sd card?
Click to expand...
Click to collapse
No.
Can your phone boot into Windows or not?
Ta
Dave
Hi, no, it will not boot to windows. just been reading around while 'RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship' is downloading. ive got connected with mtty and get cmd>. when i type boot i get 'Command Error !!!' i assume thats not good, i think rom is corrupted. tried standard HTC 6.1 RUU_Kaiser_HTC_FIN_3.29.414.0_radio_sign_25.83.40.02_1.65.17.56_Ship version 3.14.4.1 again on USB and after phone says 1% also message saying that it will not load error 294: invalid vendor id
gazzacbr said:
Hi, no, it will not boot to windows. just been reading around while 'RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship' is downloading. ive got connected with mtty and get cmd>. when i type boot i get 'Command Error !!!' i assume thats not good, i think rom is corrupted. tried standard HTC 6.1 RUU_Kaiser_HTC_FIN_3.29.414.0_radio_sign_25.83.40.02_1.65.17.56_Ship version 3.14.4.1 again on USB and after phone says 1% also message saying that it will not load error 294: invalid vendor id
Click to expand...
Click to collapse
Yeah, you need the ROM your carrier supplied.
Where is the Phone from?
Does a Hard Reset help?
Ta
Dave
woo hoo, yippeeeeeeeeeeeeee. the kaiser lives. back to standard 6.0 rom. cheers, i owe you a beer (or 2) if you are ever in abu dhabi, let me know ;-)
i can reload all from sprite backup (only from yesterday) to get me going again
but..... next will try to replace spl and then load 6.1. not sure why HTC standard would not let me update, i thought the ruu would update any htc phone
HardSPL 3.29 is first (yes?) then will try Kaiser_HTC_ASIA_HK_WWE_3.34.721.2 which sounds good. one more thing, my phone is not locked so do i need to do the 'SIM and CID-Unlock'
gazzacbr said:
woo hoo, yippeeeeeeeeeeeeee. the kaiser lives. back to standard 6.0 rom. cheers, i owe you a beer (or 2) if you are ever in abu dhabi, let me know ;-)
i can reload all from sprite backup (only from yesterday) to get me going again
but..... next will try to replace spl and then load 6.1. not sure why HTC standard would not let me update, i thought the ruu would update any htc phone
HardSPL 3.29 is first (yes?) then will try Kaiser_HTC_ASIA_HK_WWE_3.34.721.2 which sounds good. one more thing, my phone is not locked so do i need to do the 'SIM and CID-Unlock'
Click to expand...
Click to collapse
That's right, flash the HardSPL 3.29 first (SIM unlock is optional, CID unlock isn't needed - Hard SPL takes care of that - but it comes as part of the SIM unlock) then flash a WM6.1 ROM.
Ta
Dave
gazzacbr said:
not sure why HTC standard would not let me update, i thought the ruu would update any htc phone
Click to expand...
Click to collapse
Only if it's from the same region the RUU was intended for eg the European TyTN II's won't accept the latest Hong Kong WWE ROM by default because of this so as already suggested hardSPL works around this. My WM 6.0 UK original TyTN II upgraded to WM 6.1 OK but that was using the HTC UK provided ROM update. That updated everything required including the SPL and Radio to the required HTC versions. I'm back on the original WM 6.0 version though due to reliability issues with 6.1 and poor GPS performance.
OK. Decided to upload a new ROM as my phone was getting slow and unusable.
It's an O2 XDA (Touch Diamond) with:
Touchflo v3 Build 29946
ROM 1.93.206.6 WWE
09/08/08
Radio 1.00.25.05
Protocol 52.29.25.12H
Boot R1.00.25.05
I downloaded Olinex's unsigned developer Hard SPL and I extracted the NBH file and renamed it DIAMIMG.NBH following the advice here:
http://forum.xda-developers.com/showpost.php?p=2707841&postcount=4035
On soft reset I pushed the vol down and back buttons to get the boot loader stripes, then let go.
I now have a screen which says "Loading..." and has done for 20 minutes. I have now got the phone on charge while I wait for some help to see what to do next, just in case this is a critical stage - don't want to brick it.
Reading through again I am concerned that this was a procedure for rom upgrade not Hard SPL install, can someone tell me please?
Thanks in advance for any help.
Well, I ended up taking the battery off to get it to reboot. It seems to boot fine back into the old ROM.
I still intend to upgrade it (to SwiftBL's v7.5) but have a few questions:
1. Can the HardSPL be run from the internal storage card? If so is it simply running the exe from the unpacked zip from within a folder? ActiveSync is a bit too flaky for me.
2. Do I need the SIM card in the phone at any stage of the ROM upgrade?
3. On the original ROM I get a drop down menu to setup the phone to the UK O2 network settings. If I load a new ROM, will I need to know these settings?
Cheers
1. HardSPL cannot be run from storage. Only Activesync or Bootloader
2. No. You can flash without SIM card
3. You can use connection setup on any new ROM. Usually starts straight after initial setup.
OK here's where I'm at now.
Downloaded jockyw2001's HardSPL 1.24
Ran it and it got as far as prompting me to run on the phone. I said 'Yes' and the HTC screen went black as expected.
Next stage was to run the DiamondCustomRUU.exe file which I did but this is waiting for ActiveSync. ActiveSync will not sync with the phone now, I guess because the phone is not 'on'?
Where do I go from here?
Use the Hard-SPL in my sig with your RUU.
Thanks, will do (it's not the one mentioned in the ROM author's description though).
So how do I recover the phone from the black screen now? Is it safe to remove the battery to reset?
Battery pulled after reading this post:
http://forum.xda-developers.com/archive/index.php/t-427945.html
I'll try the SPL you mentioned now.....
Had a good search but can't find out. This Olinex zip contains just one file RUU_Signed.nbh.
Where do I get the other files from to run this?
use the attached . It has the RUU exe and the nbh.
Thanks. This is a signed version I see, was going to use SwiftBL's ROM which requires unsigned.
May take a look at other roms that use signed unless you think that I can load the SwiftBL rom with this version?