Database Develop

Unofficial Bluetooth Stack "Upgrade" For iMate PDA

Check out this link from PocketPCThoughts.com for a new Bluetooth patch from Broadcom for the PDA2K...
Fellow MVP Helio Diamant, of Pocket PC Freak, has gotten a fantastic little nugget for iMate PDA2k owners:
Quote:
A friend of mine has just come back from CES and brought with him a little CAB file that was being given by the guys from Broadcom there. They told him we can publish and offer for download, so I am putting it here to you guys too.
When installed, this CAB adds the following profiles to the Broadcom BT stack in the PDA2K:
1. High-Quality Audio
2. Keyboard
This means that those of you holding stereo headsets can now connect them to PDA2k and here music, navigation instructions, etc from the device. As well, Bluetooth Keyboards are supposed to work well.
Early reports suggest it works with a number of devices, including both HTC Blue Angel and HTC Harrier units; it might work with other Broadcom-based (i.e., Widcomm) Bluetooth units, but there's no guarantee. If you're interested in playing "with it, you can download the CAB here. Note: This update is unofficial and unsupported; install it at your own risk, and do a backup first! As far as I know, it's a RAM update, but I haven't tried it. Good luck if you do. "
http://www.pocketpcthoughts.com/images/parekh/misc/PDA2K_BroadcomCorp_BTUpdate.cab

i already installed on my i-mate and had to do hard reset since it hanged in boot mode.
thanks to sprite backup i am back

noviur said:
i already installed on my i-mate and had to do hard reset since it hanged in boot mode.
thanks to sprite backup i am back
Click to expand...
Click to collapse
Noviur,
On which device did you try ? i-Mate PDA2k?
cheers,
bins

install seems not to work
Just tried the cab install (both from my SD card and Program Files location - after resets), but nothing seems to have changed on my i-Mate PDA2k with Rom 1.22.162 WWE.
1. No BT Services were added (still only File Transfer, InformationExchange, Serial Port, Personal Network Server, Dial-up BNetworking Server, Hands-Free),
2. No update seems to have happened, all module versions remained at 1.0.0.3500 (except obviously the BTPluginManagerCE.exe [1.0.0.1]),
3. Despite the dialog box telling it is "writing information for Remove Programs" it can not be found back in the Remove Programs.
Any clues?
cheers,
bins
P.S. Just in case, and like Noviur, reverted with Sprite Backup

The version information in the package suggests 1.6.0.0600
did you install the 1.6.0.0600 upgrade before u installed this?

i installed it.. the new 2 profiles show up but the audio one doesnt work ..
i have pda2k
any help???

I installed the new patch on an SX-66. It doesn't upgrade the Bluetooth stack or provide new services. But it does add 2 new profiles. One for a Stereo audio headset (this won't work with a Hands free device since the profile doesn't include support for a MIC.) and one for a keyboard.
I also switched my Bluetooth stack to the 1.6 version posted here. This seems to be a stack based on Widcom as opposed to Microsoft. Although my device worked and seemed to pair faster my Handsfree device didn't come on when dialing the phone. So I switched back.

Remco, thx, installed the Broadcom 1.6.0.600 cab-file first and afterwards installed the PDA2k cab-file.
Update seems to have worked and indeed have the two new client profiles.
Will check in the store tomorrow if the HQ audio works indeed and if no other nuisances arise.
Will keep you in the loop.
cheers,
bins

Installed it on my Qtek9090 with rom 1.22.00/1.06.00/1337.38/1.22.556
I was able to bond my Logitech DiNovo keyboard to the PDA and use it !
It works very well, very cool to be able to type on a full size keyboard on your PDA.
I don't own a BT audio headset, so i wasn't able to test that.
All other devices like my GPS mouse, Bluetrek G2 headset etc. seem to work ok as they did before.

nop, it was I-Mate PPC. I new it is for PDA2K, but wanted to try it
Previously I installed Widcom BT 1.6.
No luck for me ... for now at least

Did it answer calls through the b/t headset? Mine wouldn't connect to the headset for outgoing or incoming calls. Also if it does work,which PDA2K cab did you use?
Thanks
bins said:
Remco, thx, installed the Broadcom 1.6.0.600 cab-file first and afterwards installed the PDA2k cab-file.
Update seems to have worked and indeed have the two new client profiles.
Will check in the store tomorrow if the HQ audio works indeed and if no other nuisances arise.
Will keep you in the loop.
cheers,
bins
Click to expand...
Click to collapse

anybody tried it on an magician device?

The file is no longer there!
Could someone please upload them agian or e-mail it to me
[email protected]
Thanks

Does this upgrade support the Audio Gateway preference (which enable u to stream mp3s to a BT headset)??

can somebody please email it to mack AT netcom.no ?
(the download URL does not work)

hi,
I have look high & low for it.
can i have the bt upgrade too? my email [email protected]

and that there is of the option of the BT dial up modem??
for when they will troubleshoot this.
greetings

Here's the file
I tried it on my HTC Himalaya. It wouldn't play any sound, not even callers voice. I had to hard reset the unit.
Good luck
Johan

Hi,
I just got my HP bluetooth headphones... and I absolutely love them!!!. The range is ok... not great, but enough to be considered fully usable. It crackles if there is some physical resistance between the MDAIII and the headphones, but other than that, they are awesome...
Anyone that is considering to get them, I highly recommend it. But be sure to have a 3500 bluetooth stack (with the extensions posted here of course) and Radio 1.06.02 (I am not sure whether 00 would do equally, but I recommend 02).
Treo

Me too. Can someone email me a copy of this file?
[email protected]
Thanks!

Blue Angel - A2DP Bluetooth

Hi all
I have got Blue Angel:
ROM: 1.42.00 WWE
Radio: 1.13.00
BT: 3900
Last week I upgraded to the T-Movbile 1.42 Rom. I then installed the A2DP profile patch and was amazed that my Omiz OMS600 headphones were actually working using the high quality audio profile, and they were working very well.
The other day I did a hard reset to sort out a few things and left it at that. Later on when I came to reinstall my A2DP it wasn't working, nor was using the headphones as just a normal headset. I tried all sorts, including downgrading my ROM because at that point I was wondering whether or not it was actually on a previous version that I had it working.
Anyway... eventually I decided it was the headphones that had an error so emailed Omiz who were very helpful and sent me the download for their firmware flashing utility. This upgraded the ROM of my headphones from 1.06 to 1.25. I can now pair my headphones as a headset but not as High Quality Audio. I can get it to add a High Quality Audio shortcut in BT manager but when it trys to connect it says: "connection failed". Before it was also saying "service unavailable on device" or somthing similar.
Any assistance would be good.
Thanks a lot.

s_t_harvey said:
I then installed the A2DP profile patch and was amazed
Click to expand...
Click to collapse
Can you, please, tell me where to find this patch?
Someone knows if it works for wm5??
Thanks!

A2DP & WM5
Hi there,
I got the patch from: ftp://xda:[email protected] Upgrades/BT profiles for build 3500/
But I'm not sure if it will work on WM5, I think I have read that it will not, this is my main reason for not moving to WM5 yet... although at the moment while i can't get A2DP working I am not much better off.
How are you finding WM5? Is it reliable enough to compete with WM2003 yet, or is there still a bit of work needed?

It doesn't work under WM5. WM5 has a Microsoft bluetooth stack, this patch does not apply.
WM5 on the BA is quite stable if you have the time to work with it. I am not going back. If somebody comes up with a BT fix for the stand-by problem that does not drain the battery, all of my issues will be fixed.

A2DP on WM5
Thanks for that... I might consider upgrading one evening when I have nothing better to do!
Do you rekon we'll ever see A2DP on the MS bluetooth stack?

Re: A2DP on WM5
s_t_harvey said:
Thanks for that... I might consider upgrading one evening when I have nothing better to do!
Do you rekon we'll ever see A2DP on the MS bluetooth stack?
Click to expand...
Click to collapse
Yeah I think so. Apparently it's not out in the wild yet, but w/ BT 1.2, a lot of people will be looking to do more with it.

shuffle said:
WM5 has a Microsoft bluetooth stack, this patch does not apply.
Click to expand...
Click to collapse
Did you mean: "the mamaich rom has microsoft bluetooth stack". I really hope we can get WM5 with the same stack I had on w2003. (Broadcom, I think). Maybe it is out there but I can't see it...
shuffle said:
WM5 on the BA is quite stable if you have the time to work with it. I am not going back.
Click to expand...
Click to collapse
I agree. By the moment, I'm very pleased with the performance of WM5 on my BA. It actually runs faster than w2003! And I'm beeing very objective, believe me!
I'm having a big annoyance with writting (sms, word, etc) as the spelling isn't allways what I wrote. On the SMS window, it seems the screen gets redrawn all the time and it loose some words...
The other big is not having A2DP. I think is very frustrating having such a nice machine without a good software that makes all its goodness work! :?
Some delayings on the screen repainting and (I'm using Pocket Informant) slow performance on the everyday tasks as opening the contacts list, or changing toanother program, for example...
shuffle said:
If somebody comes up with a BT fix for the stand-by problem that does not drain the battery, all of my issues will be fixed.
Click to expand...
Click to collapse
What do you mean? To have the BT on a low-power mode more or less?
cheers...

looking 4 answers: ad2p & bluetooth & wm5
somebody with an answer to this theme?
WAS: ad2p & bluetooth & wm5
It is somehow possible?
Anybody there? :roll:

Answer is no, not possible yet.
And to the poster above - yes, just need the bluetooth connect issue solved where it drops connection when it goes into stand-by mode. The fix that drains the battery by keeping the unit out of standby mode really isn't a fix for me.
Not that I am complaining - I'm happy to be an early adopter along for the ride..

shuffle said:
Answer is no, not possible yet.
And to the poster above - yes, just need the bluetooth connect issue solved where it drops connection when it goes into stand-by mode. The fix that drains the battery by keeping the unit out of standby mode really isn't a fix for me.
Not that I am complaining - I'm happy to be an early adopter along for the ride..
Click to expand...
Click to collapse
some URLs????
Thanks!

How do I enable A2DP on my BA??
Hello!!
I have searched the forum many many times and visited wiki, but I could only find 2 threads which is close to what I need to know. This is 1 of them.
I have got Blue Angel:
ROM: 1.40.00 WWE
Radio: 1.12.00
BT: 3900
This configuration came from the recently rom upgrade from o2.
It seems to me that it's possible to enable A2DP on a BA running on WM2003 SE, which allows me to stream music to a bt headphones??
However I just could not find a thread which has an instruction on how to do it. Not even on wiki. After reading some threads, I came to my own conclusion that I need to upgrade me BT to build 3900 and install a patch??
So this was what I did,
Since my BT is already 3900 "offical" version, thus I didn't do anything to it.
I d/l this file BA_OEM_AudioGW (1.33g.00).CAB (83KB) and ran it on my PPC. I then got the audiogw.dll in my windows folder.
That was all I did. It didn't work of course. I have another file, BroadcomCorp_BT1.0.0.3900.cab but didn't use it as I'm already on 3900??
So I was just hoping that someone who has done it and was successful, could point me in the right direction!!! Thanks a lot!!!

anyone tried running both cab loacted at
ftp://ftp.xda-developers.com/BlueAn...age BT 1.0.0.3900 and audiogw.dll - 1.33g.00/
if it works, do let me know. I currently do not have a bluetooth headphones to test with.

I have Omiz headset (with MP3 and radio FM) and due to work with my Magician I had to manually change some registry entries. Point was that my PDA was not correctly identified as a A2DP device (only HF). I paired my PDA with normal BT dongle with A2DP profile, found registry entries with dongle mac adress and copied manually keys coressponding with a2dp service to folder with my headphones profiles. After all that it was possible to chose headphopnes in BT menager as stereo audio receiver.
Maybe its similar and u should look in registry...

jarekt, can you post those registryvalues please?!

Can't get streaming audio to BT headphones
I still have had no luck with the BA_OEM_AudioGW (1.33g 00) Cab or any registry settings under WM5.

BT a2dp WM5
have you tried the file (.cab) i uploaded in BlueAngel under uploads, it let me pair BT Stereo under wm5. Nevermind I looked someone deleted it dont know why. PM me and i can send if you want, I tried to reupload but Uploads appears broken.

I am on thesame situation of errorist.
My machine is on Broadcom 3900, and I want to make A2DP work.
If anyone can shed a light on how to make it work, I'd be very very grateful.
BTW, I have a Motorola HT820.
UPDATE:
I have installed the 3900 stack + audiogw dll even though I had a factory-installed 3900 stack, and I managed to connect in handsfree mode.
I still have not found out how to connect in A2DP mode though...
Any help is appreciated.

Hi All
I dont know how useful this is going to be, but i spent ages doing research to get my ht820 and my 02 xda 2s working properly, and when i did, i wrote a semi bad guide here
http://www.corecodec.com/index.php?option=com_smf&Itemid=29&expv=0&topic=2840.0
if its any use i'd be tempted to maybe write it up proper and put in in the wiki, either way, try some of the steps or files ive listed (most of them are from here)
but it gets it working with TCPMP aswell, which is a lot better than WM10 anyhow
good luck

BTW: ivans rom uses the broadcom stack, so the patch may work, however i dont have the headphones to test it with

i've onstalled this two cabs too, but new profile didn't appeared. Bay Be some registry values didn't appied? who did this patch?

Toshiba BT Patch to remove SCMS-T for A2DP

Attached is a little program that will prevent the Toshiba BT stack (in laptops) from only connecting to headphones that support SCMS-T. I.e. all A2DP sink devices should now work.
Whytey

The thread on http://www.MTekk.com.au where the topic began for reference.
http://www.mtekk.com.au/forums/viewtopic.php?t=7862
Whytey

SCMS-T - Am I missing something?
Downloaded and ran the patch yet nothing. How fo I know it's worked?

Same problem - no change to BT headphone prob
Just an FYI, I'm also running into the same problem. Tried running SwitchTosSCMSCheck on top of Toshiba's bluetooth stack versions 3.20 and 4 without effect. (Rather than getting the SCMS error message, I get a more generic error message when trying to pair.) I noticed that the registry entries cited in the original thread weren't found during a search of my registry with either version installed ... wondering if Toshiba has tweaked to defeat this fix in the newer version.
Did some surfing on a related thread regarding BT on a Sony TR1 (which uses the same Toshiba stack but has the option to ignore SCMS). This isn't a hack because the software comes with that option enabled. (In fact, the SONY folks were hacking it to make it work with non-Toshiba products.) However, it installs very simply on my Toshiba M200
Link: http://www.drinnan.com/sw/A5_Bluetooth.zip
... replaces the BT 'antenna' with a more traditional BT symbol, but opens up into the Toshiba BT interface. Once installed, go into Options and make sure the SCMS checkbox is deselected.
This is a good fix but a short-term one. The software is evaluation only, and expires after 30 days. (There didn't seem to be an easy workaround for this.)

Re: SCMS-T - Am I missing something?
mattbatt said:
Downloaded and ran the patch yet nothing. How fo I know it's worked?
Click to expand...
Click to collapse
You need to run it while you're making a new connection, just before you would usually get the error message you run the exe and click next in the usual new connection wizard.

Thanks, Thats much better now
Thanks for this fix. I bought a Moto HT820 headset to use with my PDA/phone, which initially did not support it as the carrier chose to remove A2DP from it, but I added it back and it is great. Also I wanted to use it with my Toshiba bluetooth stack that I had to install in my Sony laptop because Sony did not support bluetooth headset of any kind and Toshiba hit the copywrite barrier, but this utility fixed that nicely, thanks. My other laptop does not support the HT820 at all either, just blows it the same lo-fi like it is a HS820, so off to mess with the stack for it. My point being that it is nice that there are people out there that can make up the slack when the big companies dangle these nice options in front of us and then snatch them back and say we can not have them. Thanks again for the save.

Hi..
thanks djwhyte.I made the downloading of the file and works well.I have Pc Toshiba M100 end BT Siemens HHB-750.

Thanks A Lot ! Patch Works Perfectly

You're the best.
Sincerly

Thanks!
Worked for me too. Thanks a heap.
And screw you to Toshiba for making the problem in the first place.

The tech's at toshiba gave me the link for the patch (SCMS-T) but for some reason XDA will not let me download it. Please help

ssmith7488 said:
The tech's at toshiba gave me the link for the patch (SCMS-T) :
Click to expand...
Click to collapse
HAHAHA! It's good to know that toshiba's tech support is on top of things!

When I try to run the .exe it does not work
I try to run the software but it does not do anything I have stack v4.00.36. Any help?

toshiba (europe) released v5 of the bt stack, it has option to disable scms-t built in...
which is great, but my headphones still lose connection (i rode the short bus to school)

Windows XP+S9+A2DP
Thankyou very much for this fix, it works great.

m400 BT stack v5+vista+S9
no joy
program wont even show in the
process/services when i look at the task manager...
vista problem? (another!!!?)

BT stack 5.10.12 upgrade the answer?
trying it now, if i dont come back- dont use it :

upgrade is legit
get it at
http://aps2.toshiba-tro.de/bluetooth/pages/download.php
simple- no need to do anything other then installing

Thanks whytey, I placed the switch on the desk top & it works well with my blue ant
speakers.
Double thanks ok.

for everyone who is confused by this scms-t..
you need to run the switchtosscms right before pairing your devices..
for me, i rand the .exe everytime it went for the next step.. even when its connecting..
toshiba protege m400..
hope this helps.. because it was confusing for me..
the sony A5 thing is junk...

BroadComm Bluteooth Stack

For any who wants to upgrade their existing PPC's Bluetooth stack to BroadComm stack...download from here : http://rapidshare.com/files/67820520/WidcommBluetooth.rar

ather90 said:
For any who wants to upgrade their existing PPC's Bluetooth stack to WIDCOMM stack...download from here : http://rapidshare.com/files/67820520/WidcommBluetooth.rar
Click to expand...
Click to collapse
That's great...
But - have you try it on your Hima? If so... then it's fantastic

sorry i ahvent because my chraging block is broken..and i dnt have a card reader..will sold tomorrow

OK then... I'll try to check it tonight. Plus, I'll recombine this with a patch to a single cab.

gud and thnxx

BT
...for me working corectly great work. thx

Sweet! Finally, i can get rid of that crappy MS stack in my ROM.
Thanks ather & Helmi
EDIT: Stack works perfectly! File transfer is back to what it should be and everything's sweet!
2 questions tho.
1: Does this stack have A2DP? I've put off buying BT headphones cos the MS stack didn't support it, if this one does i'll probs go pick up a pair.
2: Know of any good bluetooth IM clients? A few mates of mine have XDAs and it'd be pretty sweet to chat to each other over bluetooth instead of using GPRS (we all work in the same vicinity (diff rooms) and at times, it'd be handy to send a quick bluetooth IM). I'm thinking if we were all on the same bluetooth personal / public network, the client'd be able to communicate with another client. In which case, it wouldn't need to be a specific bluetooth client (as the stack should, theoretically, transmit inet data over the bluetooth network), just a network client.

NxJay said:
Does this stack have A2DP? I've put off buying BT headphones cos the MS stack didn't support it
Click to expand...
Click to collapse
MS BT stack under WM 5.0 and 6.0 supports A2DP without any modification.
Works great on my Himalayas.
Sascha

NxJay said:
2: Know of any good bluetooth IM clients? A few mates of mine have XDAs and it'd be pretty sweet to chat to each other ...
Click to expand...
Click to collapse
Do you mean voice chat or txt chat? (I'm not an IM expert)
It sounds to me like we could theoretically use our devices more or less like good old walkie talkies

u can get it here : http://www.mulliner.org/bluetooth/btchat/

ather90 said:
u can get it here : http://www.mulliner.org/bluetooth/btchat/
Click to expand...
Click to collapse
that website tells me it's only for Linux. It looks like it's only txt based?

Found this link
http://www.eurescom.de/~pub-deliverables/P1100-series/P1118/D3/VoiceOverBluetooth.html
Only readable in MSIE, horror in Firefox

Maggy said:
Do you mean voice chat or txt chat? (I'm not an IM expert)
It sounds to me like we could theoretically use our devices more or less like good old walkie talkies
Click to expand...
Click to collapse
I was reading something last night about a user who'd hacked MS portrait to run as a PTT (push-to-talk) app over a bluetooth network, looked interesting. [url='http://www.pocketpcthoughts.com/forums/viewtopic.php?p=371262]Blog article[/url] | [url='http://winmobiletech.com/portrait/]MS portrait hacking link[/url]
Another app (currently in beta) is one from hipvoice.com. Apparently it's designed entirely for PTT over any network (bluetooth, wifi, gprs-etc)
TBH either text or voice IM would be good. It'd certainly be a helluva lot cheaper than SMSing friends in different rooms at work/college.
Lastly, anyone know why BT shuts off the second the device goes into standby? I used to have a widcomm stack on WM5 (a long LONG time ago) that didn't have this problem. I used to be able to start BT transfers and leave the device in my pocket (they'd still transfer even if the device standbyed). Now, the second the device turns off, all file transfers are instantly cut.
[url='http://forum.xda-developers.com/showpost.php?p=1072976&postcount=9]Here[/url]'s an old forum post i dug up showing that widcomm used to work in the background on WM5. Any reason why it won't do the same on WM6?

did u try the Broadcomm stack

8Mb of program my god!!! that too resting inside the \windows . the Hima shall crawl and sleep..

ather90 said:
did u try the Broadcomm stack
Click to expand...
Click to collapse
Same difference. Widcomm got taken over by broadcomm, so it's basically the same stack.
Yeah i'm using the stack on page 1 of this thread, works like a charm (apart from turning off during device standby).

Problems..
Hi there!
Tried and works great on my hima WM6..
Except 1 thing: i can not connect to my gps... I tried 1000 ways and no solution... It seams the com port part of the stack is wrong...
BTW i wanna uninstall... i tried and it doesnt worked... after uninstall the original bluetooth progs says there is a problem with ure hardware...
How to get back the "old" crappy MS bluetooth??
Thx..

I get this error:
The Bluetooth Radio failed to turn ON due to insufficient driver memory available.
You must perform a normal reset before you can turn ON the Bluetooth Radio.
First i install the stack, then the install do a soft reset and then i install the patch.

I've just switched for the PAN. everything is working fine, except for the SerialPort. I Think this stack need's some tweaking/hacking.
When I tested with my BT GPS, the GPS LED stopt blinking = it means the GPS is connected.
But for some reason the software/application can't find the BT GPS.
BTW does anyone know if it's possible to keep booth stack's on the device? I Love PAN, but still need SerialPort.
Thanks.

I am too stupid to use your software. With your WM6 ROM active sync not working and with other ROMs i get this error using this BT stack:
Error

[SOLUTION] Your Bluetooth disconet?

Your bluetooth disconect when you use your handsfree in your car????
Then try this software: JETware Hands-Free Extension 1.31.
I have four days without disconect.
(sorry for my english).
UPDATE 27-07-2009:
Versions of JETWARE:
1.11 (ShareWare)
1.20 (ShareWare)
1.31 (ShareWare)
1.31.178 (ShareWare)
1.40 (FreeWare??)
the good: The program solutions the disconnects of the bluetooth
the bad: BUT, in my handsfree (Saab 9-3 2008), i can make a call but i cant cut a call (i must to cut the call in the phone)
and if i uninstall i lose mi contacts in the car.
It is not perfect.

Hopefully this works mate.
Gonna try now & report back later
Cheers

Hopefully this works mate.
Gonna try now & report back later
Cheers

This Works so far. Gonna keep on trying & report back shortly. Will post another thread if it continues to be successful as this needs to be seen !

Just right.
This Works.
(sorry for my english again).

Great find hcorreo. This DOES work !
Been testing for a week now and i have had ZERO disconnections.
Thankyou so much mate

How exactly does this work?

Thats the work of 6 month looking for.
Thank you.

Screen won't stay off
I loaded the extension but now my backlight won't stay off. Is there a registry fix for this? Otherwise, it looks like a great BT extension.

Problem of the light:
I have the same problem with the version 1.31.178.1.
Try with the version 1.31.

Could this issue be fixed without having to buy a third party application?
Iam using my X1 with my builtin BT handfree in my Volvo and the problems just keeps coming.
The BT logo newer disappers like ive read about in other threads but the car and the phone seems to have massive communitcation trouble. Adressbook sync like it should but when i try to call from the car, it takes about 30sec until the phone reacts. Same goes for answering. When i press my answer button it takes about 30sec again for the phone to swallow that command. Sometimes it works, but then after 20sec the car reports that it lost its connection and if iam lucky, the connection is restored automaticly by the car.
The strange thing is that ive moved from my HTC Tytn to this phone, and the HTC never had any kind of trouble. I was running WM6 on the Tytn. Could it be WM6.1 that causes the trouble or is it the hardware in the phone?

Updated first post with info of versions and more info.

flashed to EnergyRom WM6.5 and disconnect is gone too
Used to disconnect randomly after 50-80second on my car's bluetooth

I have another problem, my bluetooth headset(SE HBH DS-205) disconnecting when i use WiFI

Jet Ware is good for the bluetooth desconexion.
Someone have a idea about how can i hang a call with the JetWare installed?
Thats the only thing to be perfect...