Hi,
Setting up my SBS2003 for push mail on my Qtek 9100.
I have been following the Microsoft setup white papers.
(Step-by-Step Guide to Deploying Windows Mobile-based Devices with Microsoft Exchange Server 2003 )
Trouble is the certificates seem to be causing the problem.
I copy across the only one found in my server clientsapps/sbscert directory ,( its called SBSCert.) to my qtek and it wont run.
It says cannot access certificate.
I tried loading the spaddcert file then adding the certificate and it says not a valid certificate.
CAn someone help me on this?
thanks,
Dave.
Hi,
Check out http://www.msexchange.org for MS Exchange information.
They have lots of information of MS Exchange server stuff. This site is mainly for the XDA/MDA related stuff.
-Tim
I'm going to assume you've already created a certificate (easiest way is through the Connect to Internet Wizard)
On your SBS server run mmc from the Run line. Then go to File - Add/Remove Snapi-n. Click Add and add the Certificates snap-in.
Then open the Certificate snap-in. Drill down to Trusted Root Certification Authorities\Certificates and locate the certificate that you created. Right click , All Tasks, Export. Export to der encoded binary (the first one). Now copy that file to your device, execute and all should be well!
Hope that helps.
thanks but i'm not sure now what I'm looking for.
Anybody who has it working can you provide me with some help.
You need to export the certificate you created and then install it on your device.
To export:
Open internet explorer and then click,
Tools - internet options - content - certificates - trusted root certificates
locate the one you created, highlight it and then click export.
Follow through the instructions, and export it to a location where you can find it.
After you've exported it copy the exported cert' to your device.
Finally on your device navigate to the certificate and click on it.
Well it seems to be working at the moment.
Dr Puttingham has been a great help.
Just trying to sort it out so that I can turn SSL back on but other than that its working just fine.
Introducing the SslChainSaver
Here's a GREAT lil util I found that makes this all just a little easier!
http://blogs.msdn.com/windowsmobile/archive/2006/08/11/sslchainsaver.aspx
I ran into this as I'm writing a cab will install my self gererated cert from my customized Extended ROM along with my many registry tweaks, etc and discovered that it's not that easy!
I am having a similar problem. My work's certificate is issued internally. I used Sslchainsaver to get the root.cr file and installed it on my T-Mobile MDA (on Cingular network). When it attemps to syncronize I get the following error:
You have an incorrect SSL certificate common name in the Host Name field. For example, you may have entered www.tailspintoys when the common name on the certificate is actually www.wingtiptoys.com. Make sure the server name is entered correctly.
Support Code: 0x80072F06
Any help would be really appreciated since I have been trying to get this to work for quite sometime now.
Thanks
@azaouk - my rule of thumb has always been to name this with the Fully Qualified Name (FQN) of my mx record. For instance say my domain is www.whyeatme.com. I would typically create a "A" record for "mail.whyeatme.com" or such. Then I create my self gernerated certificate with that same name. It's telling you what it's complaint is ...
Dr Puttingham said:
I'm going to assume you've already created a certificate (easiest way is through the Connect to Internet Wizard)
Click to expand...
Click to collapse
Hi all !
So... how about assuming I didn't create the user certificate yet...
The thing is, I already had to do that for one user, worked fine, created a user.cer file, and already have a mobile.cer file, if I put them both on a windows mobile device, mails arrive from the exchange server.
Now I have to do this again, but I don't remember how I did it and however I did this all alone last time, it seems I'm unable to retreive that path again...
So, I'm not sure we are talking about the same method here, I do this very very simple, but I'm sure someone here can tell me how I just get that cer file for a specific user.
Thanks in advance !!
Michel
Related
I received these today from I-mate, after I called customer care about Bluetooth problems.
They advised me to try these files, they e-mailed them to me. I don't know what's in them or anything at this point, figured I would get them up first so others can access them.
They mentioned the files were available from www.bluetooth.jazzpel.es I tried accessing this site but it doesn't appear to exist or is offline.
Let the experimenting begin... :lol:
Can you post them here, please.
They are posted, you may need to register your account to see them.
Both files are Pocket Bluetooth Tools, v1012 and v1100.
It appears these aren't driver updates, but an application.
Also, the web address they have is wrong, it should be: www.bluetooth.jazztel.es.
The tool is also for the Microsoft stack, which the PDA2K doesn't use. Looks like the tool is useless.
Sorry everyone!
Those are not for Blue Angel, but for the Himalaya
i extracted those files and checked to install!
it for the MS Bluetooth programs for Himalaya.
[BTHTools1012]
BTHSerial.dll
BTHTools.dll
(setup dialog for Virtual serial com V1.012)
[BTHTools1100]
BTHDev.dll
BTHSerial.dll
BTHTools.dll
(setup dialog for Virtual serial com V1.1.0.0)
BTHToday.dll
This may seem like a weird request but I am looking for a way to share folders on my Kaiser. The reason for this is that my wife has a Wizard and I have set up a WiFi network between the two to play games together. I download software and games at work and then need to tranfer the the files to the Wizard.
Now I know that you can transfer it via bluetooth but that sometimes take quite long and since we have a wifi network thought that why not look for a way of utilizing it for the file transferring as well.
I have tried to Google the subject extensively but only got ways of sharing folders between my pc and the ppc's, nothing on ppc to ppc.
Any input regarding this would be appreciated.
I'm also interested in such a feature (so I don't think is weird )! My search on the subject has concluded that even though M$ has SMB server in Windows CE (after all, SMB is a Microsoft protocol!), only the client side is included in WindowsMobile
The closest thing I have managed to achieve is to use an FTP server on the kaiser, and Novell's Netdrive on the PC (http://www.novell.com/coolsolutions/qna/999.html)
hope it helps...
hypest
due to limitations in the windows mobile network stack, network shares are not possible from windows mobile.
you can access and create remote mapped drives with resco explorer, vm net browser, and z2 pocketlan... among others.
ftp may be the only option other than a raw activesync connection or bluetooth/irda
jd
Where there is a will their has to be a way.
Thanks for the responce guys, really do appreciate it.
Surely there must be a way to achieve something like this, if there is one thing I have learned from these forums it has to be that just about anything is possible. I'm sure there as to be something we can do. I will not stop digging till I find a way.
hypest said:
I'm also interested in such a feature (so I don't think is weird )! My search on the subject has concluded that even though M$ has SMB server in Windows CE (after all, SMB is a Microsoft protocol!), only the client side is included in WindowsMobile
The closest thing I have managed to achieve is to use an FTP server on the kaiser, and Novell's Netdrive on the PC (http://www.novell.com/coolsolutions/qna/999.html)
hope it helps...
hypest
Click to expand...
Click to collapse
I'm not to sure what you mean by the ftp server on the Kaiser. Do I create a folder on the Kaiser that acts as a ftp folder and then connect to that or is it still a ftp folder on a server somewhere else and then need internet connection to connect to it. Please could you tell me more about this.
Thanks in advance.
vip3r69 said:
I'm not to sure what you mean by the ftp server on the Kaiser. Do I create a folder on the Kaiser that acts as a ftp folder and then connect to that or is it still a ftp folder on a server somewhere else and then need internet connection to connect to it. Please could you tell me more about this.
Thanks in advance.
Click to expand...
Click to collapse
Yeap, here it is:
You can run an FTP server on the kaiser (like the free Mocha FTP server) which will let incoming network users to access a directory you specify... I have specified the whole root dir "\". Then, you can use any ftp client software on a desktop PC (or another kaiser of course) to access the FTP server that is running on your kaiser. Of course, you have to know the IP address of the server. Once you have verified that the kaiser is accessible and the files downloadable, you can use the Novell's Netdrive (free also) to create a virtual disk on the client PC that will actually use FTP! That way, any program on the PC can access the kaiser's files, just as normal filesystem files. Apart from the delays and latencies, the scenario works great. As a matter of fact, I use it within my development cycle, where I have a post-build action that copies my program's compiled executable directly to the kaiser.
I hope these made it more clear
have fun,
hypest
hypest said:
Yeap, here it is:
You can run an FTP server on the kaiser (like the free Mocha FTP server) which will let incoming network users to access a directory you specify... I have specified the whole root dir "\". Then, you can use any ftp client software on a desktop PC (or another kaiser of course) to access the FTP server that is running on your kaiser. Of course, you have to know the IP address of the server. Once you have verified that the kaiser is accessible and the files downloadable, you can use the Novell's Netdrive (free also) to create a virtual disk on the client PC that will actually use FTP! That way, any program on the PC can access the kaiser's files, just as normal filesystem files. Apart from the delays and latencies, the scenario works great. As a matter of fact, I use it within my development cycle, where I have a post-build action that copies my program's compiled executable directly to the kaiser.
I hope these made it more clear
have fun,
hypest
Click to expand...
Click to collapse
Thanks a lot for the info, I'm definitely gonna play around with this. Will post back here with my results when I'm done.
Thanks again!!!
I have checked out Mocha FTP server and downloaded it. Will test it tonight, it looks like it will do the trick though. If I run Mocha FTP server on both ppc I should be able to copy files from one to the other without a problem.
vip3r69 said:
If I run Mocha FTP server on both ppc I should be able to copy files from one to the other without a problem.
Click to expand...
Click to collapse
of course in that case, you will need an FTP client on each device... but I guess that is the easy part...
I know at least one FTP client that is a file manager at the same time (TotalCommander... the one I use )
Perhaps there is a similar way to NetDrive, to map an FTP site onto a local path on the ppc so to be "visible" from any application, but I haven't used/tried any.
hypest
Definitely Worth Trying ..
hypest, you ROCK
hypest said:
of course in that case, you will need an FTP client on each device... but I guess that is the easy part...
I know at least one FTP client that is a file manager at the same time (TotalCommander... the one I use )
Perhaps there is a similar way to NetDrive, to map an FTP site onto a local path on the ppc so to be "visible" from any application, but I haven't used/tried any.
hypest
Click to expand...
Click to collapse
Thanks you, it works like a dream. Tested it last night and at first didn't use my head. Every time I went into the FTP folder there was nothing, little red cross over the FTP connection at the top. I then created another ftp and still all I got was the little red cross( My wife then interrupted me for dinner, thanks. Cleared my head a bit) After dinner when back to it and deleted the one ftp and it was then when I saw you have to click "Connect", while clicked it and there was the folder that I shared on my ppc. Copied a couple of files and it works 100%. I use Resco Explorer 2007, works like a dream and its got a couple of other extra uses.
I'm not to pressed to have the client on both because I normally have all the stuff on mine and then copy it to my wife's. Won't do any harm to have it on both though. This is probably a little longer route than normal file sharing but it works perfect. Still going to try what you suggested above, will keep you posted.
Thanks again hypest.
vip3r69 said:
Thanks again hypest.
Click to expand...
Click to collapse
Glad you're quite satisfied with this "solution"
I really hope though that someday a SMB server will come forth (free hopefully)!
Great irony: SMB server software does exist for Symbian!!! Symbian users can export a local dir, while WindowsMobile users CANNOT!!! And this (kaiser) is supposed to be a 800euro (in Greece) BUSSINESS phone! Shame...
In South Africa the Kaiser is about R8000,00 if you were to buy it cash.
I've got it on a MTN contract costing me R419,00 per month for 2 years. For that I only get the phone and 120 anytime minutes. (BIG RIP-OFF)
Anyway I will keep playing with this and will let you know if I get a breakthrough.
Thanks again for your input.
hi all,
i was wondering...
i am looking for a proper Webserver and SSH server (daemon) for my Kaiser.
first.
i want to connect to my phone via SSH (like putty). Does any body know a good piece of software (or cab file) ??
second.
my friends wants connection to my phone webpage. Does any body know a good piece of software (or cab file) ??
many thanks in advance for all the replies !!
How about PocketPutty, http://www.pocketputty.net/. Very much like Putty.
Did you search, man? See my sig.
Not Looking For Client
thanks...but...
i am NOT looking for the client app. but for the server (or daemon) application
to make it clear...i want to run the server part on my HTC kaiser
thanks in advance
m
MWS
megasounds said:
hi all,
i was wondering...
i am looking for a proper Webserver and SSH server (daemon) for my Kaiser.
first.
i want to connect to my phone via SSH (like putty). Does any body know a good piece of software (or cab file) ??
second.
my friends wants connection to my phone webpage. Does any body know a good piece of software (or cab file) ??
many thanks in advance for all the replies !!
Click to expand...
Click to collapse
you could try this:
http://www.sphinx-soft.com/MWS/index.html
thanks...web server running..
thanks...web server running..
now i still looking for the SSH server for the Kaiser
anybody has an idea ??
m
If you like PHP..
There's also another PPC webserver called PocketHPH which will let you run PHP scripts on the phone: http://mobileleap.net/hph
Pretty neet, free for personal use. I've messed with it before, but haven't reinstalled it since reflashing.. Looking at the site, they've apparently updated it with fopen() support, which kicks ass. Now I can write webapps for my phone which interact with my website (also PHP)
w00t!
--Weasel
Be nice if this was useful with the cheap data plans from ex-Cingular, but alas, natted.. I kept thinking "It'd be nice to be able to pop a quick connection to my phone and look at some status" but just won't work.
Tried Hamachi?
There's a PPC Hamachi client which is free.. Then you get VPN capabilities, no more NAT, poof.. Access to your mobile from a computer! The only downside is that Hamachi has to be installed on the computer you're accessing from..
HTH,
--Weasel
EDIT: http://www.hamachi.cc is the address.
EDIT 2: Hard to find from the main page, it's actually here: https://secure.logmein.com/labs.asp (near the bottom)
EDIT 3: For those lazy types: https://secure.logmein.com/labs/hamachi-0.0.3.1.cab
I found this: OpenSSH ported to Windows CE!
http://www.codeplex.com/wiki/view.aspx?projectname=CESSH
It's alpha, at v0.0.1..
Download link is a weird AJAXy popupish thing, so I can't grab the URL without some legwork, and I'm feelin' kinda mellow (read: lazy) right now.. but no registration required, just click the "Download Now" button on the right..
About to d/l and try it out.. Hope it works!
HTH,
--Weasel
weasel5i2 said:
There's a PPC Hamachi client which is free.. Then you get VPN capabilities, no more NAT, poof.. Access to your mobile from a computer! The only downside is that Hamachi has to be installed on the computer you're accessing from..
HTH,
--Weasel
EDIT: http://www.hamachi.cc is the address.
EDIT 2: Hard to find from the main page, it's actually here: https://secure.logmein.com/labs.asp (near the bottom)
EDIT 3: For those lazy types: https://secure.logmein.com/labs/hamachi-0.0.3.1.cab
Click to expand...
Click to collapse
Hmm, VPN. Yeah, that could work. I wouldn't use whatever solution the above is, most likely, but a general VPN could do the trick as long as it reconnects on its own and such. Thanks for the suggestion!
weasel5i2 said:
I found this: OpenSSH ported to Windows CE!
http://www.codeplex.com/wiki/view.aspx?projectname=CESSH
It's alpha, at v0.0.1..
Download link is a weird AJAXy popupish thing, so I can't grab the URL without some legwork, and I'm feelin' kinda mellow (read: lazy) right now.. but no registration required, just click the "Download Now" button on the right..
About to d/l and try it out.. Hope it works!
HTH,
--Weasel
Click to expand...
Click to collapse
Thy this as a direct link: http://www.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=CESSH&DownloadId=4858
First of all: Hello world
I am a new and proud owner of the Nexus One Everything is just fine BUT one thing. Maybe we can sort that out..
My college uses WPA Enterprise 802.1X (TTLS+PAP) with a root certificate. Thats not the problem Android 2.1 supports it
I am able to connect, Nimbuzz and Opera Mini work, BUT none of the standard apps (Browser, Mail, News, Weather...)
I know I have to use a HTTP proxy, and I kinda think the standard apps are too dumb to do so ... (Thank you google: Issue 1273)
Is there any way to get atleast the Mail to work? I dont really get why Nimbuzz works, but shouldnt something like K9-Mail work too?
I was so worried that WPA Enterprise might not work that I totally forgot about the proxy
My Nexus one is not rooted!
Thanks in advance
Breece
Ps.: And I really dont get why the cellphone doesnt simply use the Mobile connection if WiFi doesnt work -_- That would be atleast somewhat acceptable...
How did you manage to install a root certificate on the Nexus? Apparently it just supports .p12 files, not .cer.
In the case I just have the public key, there is no way to create a .p12 file out of it. I'm lost here.
Our wireless here at work doesn't require a certificate as far as I can tell, but my N1 (2.1 or 2.2) won't ever connect to it, shows it as WEP
In Linux, I have wpa_supplicant set as:
eap=TTLS
phase2="auth=PAP"
But it just doesn't work
henriquesp said:
How did you manage to install a root certificate on the Nexus? Apparently it just supports .p12 files, not .cer
Click to expand...
Click to collapse
You can use openSSL to convert between certificate formats, if you're on windows I believe easySSL (ezSSL?) which comes with openVPN is an easy way to obtain a binary version.
Same issue here, how to get cert?
My company wifi is
eap=TTLS
phase2="auth=PAP"
and requires certificates to install. I've been googling the last 5 days and still haven't found an answer yet. Any one know how to convert .cer to .p12 for androids?
how did u instal the root cert?
Have a look here for troubleshooting: searchnetworking.techtarget.com.au/articles/41635-How-to-fix-Android-Wi-Fi-problems
It should be possible to install certificates under Settings/Security and Location(dunno the exakt term,it's all in German on my phone), if it's on your SD Card.
If however it fails, try realmb.com/droidCert
I think it's pretty much the same thing though.
//edit: somehow, it's something different...I couldn't really figure out what this is all about, 'gonna read more stuff next couple of weeks...
If you got another format, you can use this website sslshopper.com/ssl-converter.html to convert your certificate. Or just google OpenSSL convert ...something like that.
I haven't tested it, so I can't say if it works in the end, but I might find out on Thursday...Or next semester because that's gonna be the last day for the next 10 weeks I'm gonna be at uni
Try the http/s thing out yourself, I can't post links, because I'm a new user-.-
AndyBurns said:
You can use openSSL to convert between certificate formats, if you're on windows I believe easySSL (ezSSL?) which comes with openVPN is an easy way to obtain a binary version.
Click to expand...
Click to collapse
Have you tried to use any of these tools for that?
It is indeed possible to encapsulate a public + private key within a .p12 (PKCS#12) format, but if you try to create a .p12 file out of a public only key (.cer file), it will keep asking you for the private key.
So, I have no clue on what to do next. Which private key should I use?? I don't have the private key, since it is another party certificate!! So asking for a private key in this case doesn't make sense at all.
AFAIK, PKCS#12 format is to encapsulate public + private keys only, and cannot hold a public only file. Or is this assumption wrong?
CyanogenMod supports WiFi proxy. It is one global setting (not per SSID).
is it possible to connect to WPA Enterprise networks via WiFi? because I'm searching for a ROM which would allow to connect to the network on my university, which runs the following configuration:
SSID: eduroam
type: WPA-Enterprise
key exchange scheme: TKIP
authorization: EAP-PEAP-MSchapv2
IP: via DHCP
I tried it with the Energy ROM from the forum, but it doesn't allow me to enroll the certificate or it doesn't want to accept it. the other way round it doesn't allow me to enter a user name, I can only put in my password.
could somebody give me a hint what to do? I was searching the forum, found some registry hacks, but none worked
Try to change:
HKLM\\Comm\TNETW12511\Parms\WPAMixedMode
from 1 to 0.
ok, I tried it, but still the same happens:
I enter everything in the configuration menu of the comm manager, click 'next' and then I have to choose a certificate to log on - a little bit lower is a button called 'Enroll', which does nothing when hit. When I try to click 'done' it says that I have to enroll a certificate, so there's only cancel left ...
still doesen't work
well ... can somebody help please?
//edit:
well, as it seems nobody really knows how to work that out ...
Because I'm at my university every two weeks for the weekend, I'll be able to test this way of trying to connect to the WPA enterprise network in a week. but perhaps somebody else can confirm or obey this workaround:
Connect your device to your desktop/laptop and when WindowsMobileDeviceCenter (Win 7: just type the name in the search field in the start bar) opens go to Mobile Device settings >> More >> Get Device Certificates >> I know What Certificate I need to Enrol >> User ... then click enroll. Watch your device as you will be prompted to install the cert. Follow the prompts and after a few seconds you're done. When you setup your wifi connection choose PEAP and enter all the needed information.
Click to expand...
Click to collapse
It's help I got from microsoft social answers, perhaps somebody can try that out ...?
in case you understand german
http://www.rrz.uni-hamburg.de/fileadmin/internet_kommunikation/smartphone/htc-hd2_uhh-wpa.pdf
it's from my university. it also contains the instructions for eduroam.
in addition to that manual, I had to uncheck "check server certificate" in the certificate tab of the secureW2 plug-in
jones23 said:
in case you understand german
http://www.rrz.uni-hamburg.de/fileadmin/internet_kommunikation/smartphone/htc-hd2_uhh-wpa.pdf
it's from my university. it also contains the instructions for eduroam.
in addition to that manual, I had to uncheck "check server certificate" in the certificate tab of the secureW2 plug-in
Click to expand...
Click to collapse
yes, indeed, I understand german
thanks a lot for this tip, it looks a little bit different on a customized ROM and stuff, but in general it worked - I'll try it on friday or saturday, then I'll be at my university and able to give feedback!
when it'll work, I'll post a translated how-to in this thread...
sorry, I wasn't able to establish the connection with the tip by jones23 ... perhaps it works with WPA2, but not here ...
Hello,
what is the status of this? Did you find a solution?
I have the same issue since I flashed the EnergyROM.
Any ideas?
unfortunately it's truely not possible, I wasn't able to connect to the configuration from the first post using the HTC Diamond II ... damn thing!
but I'm gonna try this weekend something different: imho it's just a software problem, it's got nothing to do with hardware ... so I'm gonna try a dual boot with android and connect with that, perhaps this will work. I'll give feddback
ok, during clicking around on the device I found the solution:
Comm Manager -> Settings -> WLAN -> Network Cards
Here you can ignore the certificate and enter login data for the WIFI network.
Hopefully someone else can use this information.
@ taschenuhr
thats great to hear
@ others
perhaps you can use a notebook for testing purposes, since the connection & login data is the same. there's a windows (mac) version of that same client software.