a very NOOB alpine owner - PDA2, XDA IIi, 2020i General

hi hello to everybody. i need to know many things. maybe an expert will help me/guide me to the links i needed or maybe reply to me. my gf bought me an o2 xda lli last june. it works fine for me all this time and i have no prob about it. i somehow fried the cradle by inserting a bad adaptor to it and it wont work. so i don't do any backups yet or whatsoever from the pc. all i had was the 1 GB sdcard. i bought an infra red adapter recently and was wondering on trying updated roms with all the hype regarding on better performances as you guys have confessed. now unto my question:
1.do i need to upgrade my rom
XDA IIi
Rom Version: 1.11.00 WWE
Rom Date: 01/27/05
Radio Version: 1.00.00
Protocol Version: 1337.39
ExtROM Version: 1.11.923 WWE
since it never gave me a headache as of yet? honest opinion only please
2.how will i do it? any step by step instruction perhaps since i am very new to this.
3.will i be able to return back to my original rom if i happened not to like the upgrades?
4.again is it safe or worth risking it?any step by step procedure to go back to my old rom would be a big help
what do you think guys?

In my opinion you don't need to update your device! And if I know it right there isn't an update over 1.11.00!

Hi MacGuyver first-of-all Welcome to the XDA community. You have mentioned that you have already burnt-up your cradle, and then have you arranged another yet? Because once you will run-out of the battery completely then you will loose all the information as your XDA will reset to its default position.
As far as the concern about the ROM you have got the latest ROM but I think this Rom is the default rom from the manufacturer, I am using the same rom as well but the edited version (you can see in picture), edited means few features have been altered from the original rom e.g. All the O2’s crap has been deleted and by that the system is using less CPU power. I can help you out if you want that Rom. I am a big admirer of the SPB softwares as they are light and accurate (try the link below) and I am using nearly all of their softwares (pictures attached).
http://www.spbsoftwarehouse.com/products/?en
Sidd

One suggestion would be to check out ebay and some of the other online sites for a replacement cradle and power supply, then you will at least have full connectivity to the computer.

thanks for the warm welcome guys. as you can see i live in the philippines and i am away from the metropolis for the moment till the end of the year. there are no cradles for sale right now at this town. so i might end up buying it by january when i return to work. anyways i have seek help from a local cell shop and the dude there gave me this charger which cost me about 10dollars just to have the unit charged. it was a modified nokia charger, but it gets the job done, so i'm guessing that the infra red device i bought will be of no help for connectivity for my Alpine? actually i never tried it yet with the alpine, because i treasure this baby so much don't want to mess or destriy it and all.
i do consider upgrading the camera though since it looks so dusty. and yes i want to rid it of the O2 stuff as well. so far i am happy with it's performance. got few more questions to ask.
1. by fixing the camera, do i really need to have an entirely new rom on the unit?
2.judging by what you guys said, updating the rom using with the infra red device is not adviseable, or it can be done?
3.do people on ebay really can be trusted sending stuff to remote places like the philippines if i go shopping from there?
thank you and i am very much enjoying my stay here guys

Hey a fellow countryman!
There is a shop that sells XDA series Phones and accessories. It's not a specialty shop but it is the only one in the country. If I remember correctly it is called Brightpoint, located in Araneta Mall.
Been there once, I kinda broke the phone and had to have it reflashedd with the original ROM.
First of regarding "upgrading" the ROM, only the Extended Rom can be manipulated.
The radio version has a newer version, v1.04. Don't know the exact difference and the O2 website doesn't give it to Asian XDA owners (been checking and no upgrades for us in this part of the world).
The WWE ROM is still the same thing as far as I have learned. Although you can change it for another language (Don't know how but a lot of people have been requesting the localized version of the ROMs for their country).
One method of taking out the O2 stuff (without having to reflash) to relieve more memory would be to cancel the installation after a hard reset. It is a bit tedious since the installs are somewhat fast and at times you might cancel the installation of an important program!
Plus, our ExtROM also has the keys and screen locked during installation.
On the other hand you can modify your ExtROM to not install the O2 stuff. That would need a cradle (as far as I have experienced).
Keep reading the forums out there to check if you really want to change your ROM or not.
And if you do want to change your ROM, I also learned from these forums how to do it. Also, one poster gave a website that has it as a step by step. It's not anymore updated (the thread) but is still very useful.
On my next post I'll answer your next questions as long as I am sure of the answers...

MacGuyver said:
thanks for the warm welcome guys. as you can see i live in the philippines and i am away from the metropolis for the moment till the end of the year. there are no cradles for sale right now at this town. so i might end up buying it by january when i return to work. anyways i have seek help from a local cell shop and the dude there gave me this charger which cost me about 10dollars just to have the unit charged. it was a modified nokia charger, but it gets the job done, so i'm guessing that the infra red device i bought will be of no help for connectivity for my Alpine? actually i never tried it yet with the alpine, because i treasure this baby so much don't want to mess or destriy it and all.
i do consider upgrading the camera though since it looks so dusty. and yes i want to rid it of the O2 stuff as well. so far i am happy with it's performance. got few more questions to ask.
1. by fixing the camera, do i really need to have an entirely new rom on the unit?
2.judging by what you guys said, updating the rom using with the infra red device is not adviseable, or it can be done?
3.do people on ebay really can be trusted sending stuff to remote places like the philippines if i go shopping from there?
thank you and i am very much enjoying my stay here guys
Click to expand...
Click to collapse
Answers to questions:
1. As far as I have learned, the camera fix is a CAB installer inside the ExtROM. More like a patch installer. A new ROM isn't needed unless you want the patch to automatically install after a hard reset.
A copy of the CAB file is just what you need.
If you're thinking of grabbing the camera patch posted here, you'll need to open up the ExtROM file (uploaded here) to get it.
2. I haven't used IR yet but I have had a VERY SLOW experience with it. It took me 20+minutes to receive a 1MB file. (haven't checked my settings, it might have caused the slow transfer)
The ROM upgrades are approx. 50MB total.
From my point of view it's better to go for the cradle.
3. There is the ebay philippines website. Although the cradle doesn't get sold separately there.
As for international ebay, you do shoulder the cost of shipping and would also pay additional if customs over here categorized it as taxable goods.
Try checking out Brightpoint at Araneta Mall sometime, they might have the cradle there as a separate item.
Goodluck and don't forget to backup your old ROM before upgrading!

wow thanks a lot JP2005. that was very informative. yep i heard about brightpoint too. actually i have been there i think last year. my phone came from japan but it is in english. after reading your post i have changed my mind regarding upgrading the rom for the moment, maybe in the future but not now.
i am also interested at this cab file installer for the camera to somehow make it look a bit presentable, if you can fill me in the details or anybody around here to show me some links to it that would be much appreciated. anyways i have printed out the instructions i thought might came handy to me regarding guides. thanks you again good day

can any good soul upload an asian rom [factory default] .nbf file to the server? you know the file being used to backed up in the memory card. thanks
also if i just run the cab files inside the zips of the rom upgrade, will it work or crash? for example the camera fix?

MacGuyver said:
can any good soul upload an asian rom [factory default] .nbf file to the server? you know the file being used to backed up in the memory card. thanks
also if i just run the cab files inside the zips of the rom upgrade, will it work or crash? for example the camera fix?
Click to expand...
Click to collapse
Elo...
I've managed to backup the original ROM sold for the Philippines via the SD card backup.
Unfortunately, it takes the same space as the capacity of the SD card used.
I used the 128MB SD card and have backed up 128MB of ROM data (not the actual size but it uses the whole card).
I'll try to upload it via the download service websites when I have the time. Will PM you or post in this thread the link.
Also, as far as I know you can only flash this file via SD card and bootloader mode.
The necessary programs and instructions I'll try to pack in within an archive file so you don't have to look around for it.

thank you so very much. you just made a pinoy happy

Sorry for late reply...
Here's the link:
Code:
http://rapidshare.com/files/3602200/AsiaIIiBACKUP.rar.html
The file is in .rar format and is 83MB...
Good luck with your upgrades!

does running the camera patch.cab file alone damages the OS of a pocket PC?

MacGuyver said:
does running the camera patch.cab file alone damages the OS of a pocket PC?
Click to expand...
Click to collapse
I don't think the camera patch will affect the OS...
The deepest it can tamper is the registry (as far as I know). It creates the required parameters for the camera to operate.
So I think the camera patch will probably do some fixes to the camera (prog) registry...

thanks for the reply. but you are still not very sure about this yet? i am planning on extracting the camera fix from Pugs rom and running it as a cab file fom the ppc. i am still trying to know if my proceedure will work or fail

MacGuyver said:
thanks for the reply. but you are still not very sure about this yet? i am planning on extracting the camera fix from Pugs rom and running it as a cab file fom the ppc. i am still trying to know if my proceedure will work or fail
Click to expand...
Click to collapse
This probably won't hurt the system...
I've tried PUG's ROM (the whole package) and my Alpine didn't go haywire.
Everything was fine but I kinda missed the rotatescreen icon and didn't know how to let it show via registry edit...
So I went and restored the original ROM and just upgraded the Radio from PUG's ROM and cooked my own Ext_ROM.

you just run the .cab file of the radio? if so that answers question of running these fixes while everything is installed

MacGuyver said:
you just run the .cab file of the radio? if so that answers question of running these fixes while everything is installed
Click to expand...
Click to collapse
nope, the radio is flashed...
I just renamed the ms_.nbf and nk.nbf files so they won't flash together with the radio...

thanks a bunch. it clears up everything.
i guess after i do the radio then i have to get sun/globe/smart configs too since they have UK once and that doesn't include our telcos.

MacGuyver said:
thanks a bunch. it clears up everything.
i guess after i do the radio then i have to get sun/globe/smart configs too since they have UK once and that doesn't include our telcos.
Click to expand...
Click to collapse
If you like I can give you the autoconfig files for our networks.

Related

O2 V1.11.171 Now Available

Just checked the o2 site and it seems this upgrade is now available, not tried it yet but will tonight
hi, which site are you downloading from?
www.my-xda.com
Any news on whether it is worth upgrading to the .171 ROM? Seems as though the radio is back to 1.00?
bobster007 said:
Just checked the o2 site and it seems this upgrade is now available, not tried it yet but will tonight
Click to expand...
Click to collapse
We are waiting for more info about the new rom!
Might be an anomoly but I tried the 171 ROM modified and my device has hard reset twice, with the original ROM the phone stopped working and needed a hard reset to sort it out, twice.
Think I'll keep to my 162 ROM. How's everyone else found it?
http://www.my-xda.com/xda2i_soft3.html
here's the direct link for 1.11.171 - just downloading and will let you know how I get on after discovering that 1.11.170 (blackberry)didn't work with radio version as supplied.
Hi!
When I have install it. It apeared the radio 1.100
So still old radio, not v1.104
phuong said:
Hi!
When I have install it. It apeared the radio 1.100
So still old radio, not v1.104
Click to expand...
Click to collapse
that is correct. Radio 1.104 is not compatible with the Blackberry system. This is the main reason that ROM 1.11.170 was removed from the o2 website as it had upgraded the Radio version from 1.100 to 1.104.
Hi! I've just bought an O2XDAIIi. I just wonder which ROM version I should use to upgrade my XDA. Could anyone give me an advice?
MrSandman said:
Hi! I've just bought an O2XDAIIi. I just wonder which ROM version I should use to upgrade my XDA. Could anyone give me an advice?
Click to expand...
Click to collapse
I'm using Blackberry and have upgraded to the latest o2 ROM - 1.11.171. If you aren't using Blackberry, try using Pugs cooked version of 1.11.169.
Is there any change to Blackberry functionality on 71 over 69?
Won't be changing if there isn't.
I belive that if your using the o2email open and not the BES version you won;t lose your Calendar options.
We use BES so no need to change then - thanks
Well ROM version 1.11.171 seems to be as stable as 1.11.169 and I don't have to use the workaround to sync Outlook Calendar.
I wonder if o2 are going to release more XDA phones that can use Blackberry - I quiet fancy the o2 Atom but it doesn't list BB which is a shame.
171 ROM is the BT reliability resolved
Symbasean,
Stating that the 171 ROM is as stable as the 169 ROM is a little bit of a two edged sword for me.
When I applied the O2 ROM last October / November it trashed my bluetooth functionality, effectively making my Jabra 250V a large black ear ring and the XDA 11i an electronic chocolate tea pot, for use in a car.
Can you sense my frustration with O2, who offered me £10 off my next bill as compensation and then didn't give it to me.
I switched to one of PUG's home cooked ROMs and this has been 80% successful, but randomly fails to deliver the sound.
His version has been a saviour, but would the 171 be an improvement for the BT stability and reliability?
Sorry for the incredibly rambling first post. :?: :roll:
I upgraded to the new software last night and have noticed one small annoyance. I used to be able to to deactivate GPRS by clicking the connectivity icon in the title bar and tapping disconnect. Now the disconnect option isn't there for GPRS. Eventually I discovered that I could turn off GPRS by holding the end call button.
Re: 171 ROM is the BT reliability resolved
dgt1963 said:
Symbasean,
Stating that the 171 ROM is as stable as the 169 ROM is a little bit of a two edged sword for me.
When I applied the O2 ROM last October / November it trashed my bluetooth functionality, effectively making my Jabra 250V a large black ear ring and the XDA 11i an electronic chocolate tea pot, for use in a car.
Can you sense my frustration with O2, who offered me £10 off my next bill as compensation and then didn't give it to me.
I switched to one of PUG's home cooked ROMs and this has been 80% successful, but randomly fails to deliver the sound.
His version has been a saviour, but would the 171 be an improvement for the BT stability and reliability?
Sorry for the incredibly rambling first post. :?: :roll:
Click to expand...
Click to collapse
two points:-
1. please spell my name correctly.
2. "Well ROM version 1.11.171 seems" - note also the word, "Seems". I make no direct comparison on stablity, only that mine has not crashed - caveat empore......
Apologies
Symbaseian
Sorry for the mistake.
I shall try the ROM and see.
I have to agree caveat emptor is an appropriate warning with this particular device.
If it worked as well as it is should, straoight out of the box, it would be excellent.
But it does have some way to go, and without the likes of these forums, it would not happen.
Dave
Re: Apologies
dgt1963 said:
Symbaseian
Sorry for the mistake.
I shall try the ROM and see.
I have to agree caveat emptor is an appropriate warning with this particular device.
If it worked as well as it is should, straoight out of the box, it would be excellent.
But it does have some way to go, and without the likes of these forums, it would not happen.
Dave
Click to expand...
Click to collapse
I totally agree. When I first got one of these I couldn't use TT3 let alone TT5 without it locking up all the time if I used anything other than my old 128mb Compaq SD card, but having listened and learned on this forum and also on pocketgpsworld I now have a stable XDAIIi with blackberry.
It's taken a long time to get to where I'm fully happy with the device (except camera performance - but I very rarely use that anyway) often involving Tomtom tech support, o2 tech support and these forums. If you feel happy using Pugs ROM version without blackberry please go ahead, but for me that's not an option.
It's just a shame that we have had to co-develope to get a product that is finally starting to show everything that it first promised.....

Upgrading Radio Rom ONLY

Is that possible? Everything I've read involving upgrading the ROM; I'm not interested in loosing all my settings etc, I just want a better radio ROM since mine looses EDGE/GPRS connection periodically. Is there a way to do this? Thanks.
This is possible to do. The files are in the usual place, and remember to unlock your CID first.
Be aware that it may claim that it will change your OS Rom version and/ir it may overestimate the time required--this is normal. Your OS Rom will stay the same and it should take only a minute or two.
I upgraded mine the night before last. I didn't use CID unlock or anything. I just d/l'd the file Wizard_GSM_11210.exe from the ftp and double clicked on it. It does tell you that you will lose everything and your OS is being upgraded, but that did not happen, it was just compiled with that installer, that's all, so don't worry.
My signal is stronger and my speakerphone works great now. I lost nothing and nothing else was changed.
Good luck.
Yep - done on my T-Mobile MDA. The stock radio ROM sucked bananas.
Will it adversely affect my Cingular 8125 in any way?
works!
Thanks for the quick reply guys. I installed the Wiz radio rom from the FTP site and it worked. EDGE and even Wifi seemed mroe stable and faster now. And all my data's still there!
As for the 8125, my friend got one of them and I'll ask him to try updating his radio rom with this same file and see if it breaks it.
Wow! It really does make a tremendous difference, thanks fellas!
which is the last version of the RADIO ROM ?
I got 01.13.10 inside the last WWE qtek wizard upgrade (1.6.7.1)
That's probably it. My phone came with 1.09 and the ROM I just applied is 1.12.
Would upgrading my MDA's Radio ROM to 1.13.10 adversely effect my battery life?
Well, if you get signals where you had none before, you might use the phone a lot more, so that would use more energy.
Seriously, I haven't noticed any difference in my battery's state of charge or rate of discharge.
So is it safe to say that the Radio ROM upgrades (1.12/1.13) are better than the stock US TMo MDA Radio ROM? I'm looking to upgrade but don't want to wind up with worse reception and/or a void warranty. Suggestions?
you could always use aWizard and backup your radio so if you need to return the unit for any reason, you could restore the old rom. i backed all of my stuff up and its sittin on in a folder hidden away
Thanks for the suggestion blazin...I'll have to start the process of learning about aWizard and how to use it.
Settings and whatnot
I have been trying to figure out the pluses to tampering, and this is one of the first threads where I have actually found a real positive. I am kinda simple though I have been weighing the options of flashing the ROM to reclaim some storage. I LIKE the voice dial on it right now. I could care less about the pdf viewer. I can download adobe and install it to SD. What other cabs in the extended ROM can I do without, how much storage can I reclaim, and how stable is the ROM I obtain. How difficult will it be to get the settings right to make good calls. I don't use edge or gprs for data. I do use wifi at home and around town. Is there a "for dummies" primer on how to do this. I am not a complete rookie with PPC, but I have no programming knowledge whatsoever. These threads rapidly leave me in the dust. I feel like a mule looking at a new gate quite often. :lol:

Is this an easy fix?

I bought a TyTN II, unlocked HTC model. It seems to be a grey import, alghtough it has a "GB" serial, the box says Singapre/Vietnam.
The GPRS networks are all from Asia/Pacific. I cannot get it to connect to AT&T.
I've searched but cannot find a quick answer (or any, in fact). Any help would be greatly appreciated!
Thanks!
Keith
Try these - the carrier settings for the Kaiser/Tilt are the same as for the Hermes/TyTN, so they should work.....(famous last words)...
From @MrDSL - this post and associated CABs
From @wpbear - this post / CAB
HTH,
Mark.
Thanks Mark, these are Cingular - do you know if that's the same files as needed for AT&T (or are they the same now)?
Any danger of bricking at all by running these?
Keith
(Fellow Brit )
you cant BRICK a device simply by installing settings onto it.
you can brick a device by flashing a device that doesnt have hardspl on it however
andaroo said:
you cant BRICK a device simply by installing settings onto it.
you can brick a device by flashing a device that does have hardspl on it however
Click to expand...
Click to collapse
Hmmm...methinks a typo crept in there
If a device has HardSPL installed, then it is protected from becoming a brick due to a bad flash....
@tanglin - I'm pretty sure that "Cingular Wireless" is the new name for AT&T if I remember right. As @andaroo correctly stated, it won't do any harm to install the Cingular CABs to see if that fixes your Kaiser/TyTN II so that it works with your provider.....let's face it, it's more likely to work than the current Far East networks you've got configured
If you're in it for the duration and considering flashing an updated ROM, you would do well to read the Kaiser wiki - there's a page on there relating to a ROM by Quentin - Q-Mobile 1.2 - which is pretty damn good....plus Quentin has an "AT&T specific" version that will have all the correct settings built in.
There's plenty of other AT&T/Cingular users on the Kaiser forums, so you should get a response from someone who knows exactly what you need.
Enjoy!!
Mark.
So I took a deep breath...
Grabbed the 8525 cab and installed it. Rebooted, and voila, 3G right away with AT&T!
Mark, many thanks for your help. Now I just want to find a way to tidy up the Network Wizard combo list (with all the Asian countries in) and I'm set. But since the phone's working OK, I'm relieved I didn't just drop $800 on a grey import which did not work.
BTW, I am getting good support from the vendor I bought it from, so I don't feel too bad. For example, TomTom is not on this phone, so they provided a link. The s/w I downloaded would not install (invalid PowerPC application), so they said they would send it to me on a 1GB card. Not bad if they actually do! However I do want to put in an 8GB card anyway so I'll probably buy the nav software - it's one of the main things I want the phone for anyway.
If the vendor does come up with the goods, I'll post their name. It was $100 cheaper than the one my colleague uses (obviously the grey import has something to do with that!) but the support seems to be very good from a reseller.
Thanks again for the help!!

Wich ANTI THEFT program is better?

hi guys, I have my precious HTC touch diamond for a week now, and because of its beautifull shine, everyone wants to have one.
That's why i did some searching on the web about anti theft programs, and I found these 3
Ultimate Theft Alert v3
W.I.M.P.
Sprite Terminator
They all look pretty good, but before buying anything (or downloading ) I want to know wich one is best to pick, could you guys help me with that? also keep on mind that the program has to work on a VGA screen
Thanks, Markos Wahid
Tried three of them also and decided to (actually buy) sprite terminator with a coupon disc 50% (forgot where i got it thou), reason to buy:
- support
- price (very cheap!!!)
- easy to use
a program called mobile justice thats free and does the job, if you burn it in to a ROM before you flash the ROM to your device it will resist hardresets as well unlike most programs out there.
http://sourceforge.net/projects/mjustice/
not to mention a steel chain with a steel lock, one end at yr diamond, second one around yr neck
jokes aside, ultimate theft alert is the most popular.
i am sorry to see that the diamond in his actual configuration doesn't support the very slim chance that somebody will find it and be willing to return it, i am talking about OWNER INFORMATION!! gone in the invisible "today" screen
I need some advice to burn Ultimate theft alert to a ROM on diamond.
Is this possible?
^probably... check the developer forum..theyd be better at answering that...
i think the guy who makes ultimate theft also posts here...It seems the nicest.. the other alternative is sprite...the middle one doesnt look nice. i dont really know since i never had a wm device. im just saying from what ive read...
I tried to install Theft Alert but the instalation crashes...
Has anyone the same issue?
KukurikU said:
i am sorry to see that the diamond in his actual configuration doesn't support the very slim chance that somebody will find it and be willing to return it, i am talking about OWNER INFORMATION!! gone in the invisible "today" screen
Click to expand...
Click to collapse
Settings --> Owner information --> Options --> "When the device is turned on, display: Identification Information"
Sprite terminator requires some additional editing. It says my GPS location is in China somewhere.
Ultimate Theft seems to work alright, but I havent tested it yet with the sims, which I'll do in a few minutes.
I like the ULT 3.5 better.
what i'll like to know is how to burn. the developer section have no guide on actual burning and takes for granted that we're rom cookers so i for one, understand nothing T.T
Baronic said:
what i'll like to know is how to burn. the developer section have no guide on actual burning and takes for granted that we're rom cookers so i for one, understand nothing T.T
Click to expand...
Click to collapse
I agree. All these softwares are useless as most people would hard reset the device.... As far as cooking goes, I really want to get into doing this - I just need the 'beginner' tutorial, before the 'hardcore' tutorial..
Even the SPL must be protected against reflashing of the phone then. Is that possible?
So locking the SPL so no new SPL can be flashed either, and new ROM flashing is impossible then.
There are too many smart people who just fix that 'hot' phone with UTA or any program to original. And the thing you want is you phone back.
Riel said:
Even the SPL must be protected against reflashing of the phone then. Is that possible?
So locking the SPL so no new SPL can be flashed either, and new ROM flashing is impossible then.
There are too many smart people who just fix that 'hot' phone with UTA or any program to original. And the thing you want is you phone back.
Click to expand...
Click to collapse
Well I do know that HardSPL has overwrite protection and you cannot flash a new SPL after you've installed it. Although there will be a 'downgrade' package soon so you can get back to stock SPL.
I don't understand why there isn't such a flash and/or hard reset protection...it's just very frustrating when you lose the device(like I did once) knowing the next 'owner' could simply hard reset (or flash a new ROM) to use it as his own device. I know, cooking some settings into a ROM solves a little piece, but more and more people are aware of XDA-dev and know about flashing. So you could cook your anti-theft into your ROM, but agianst flashing there is nothing u can do
Well, I thought, it should be possible to lock SPL flashing, by encrypting the bootloader by (my own) password?
On the moment one makes flashing without my password impossible, a antitheft program can be installed in the ROM and running always, even with hard-reset.
One should vind an easy way of providing MY sim card data into that rom prior to flashing.
Hi Folks,
But back to the topic, is there any anti-theft programs that really works in the first place for Diamond? I had tried Star Enforcer (it can't get the current IMSI number), Mobile Justice (it can't send out SMS) and RemoteTracker (can't run... I need to research more on this..).
Cheers.
mobile justice, did you install the certificate? most problems are as a result of that not being done, give me a PM if you want a hand and ill talk you through it, it does work well, but as already been mentioned all it takes for any software is a full flash, if you install many of the apps to the ROM before flashing it you can at least survive a hard reset.
Thanks Dazza,
I had missed installing the certificate.
But now, after some testing, I found out that it was only able to send out SMS unless I select "Disp.MsgBox".
Is this something expected? May be MJ needs to be re-rewritten or recompiled for WM6.1?
I'm aware of the hard reset issue. Am planning for myself to learn how to cook up a ROM, with my details in, to prevent this.
Cheers.
Tried UTA 3.5. and WIMP
Both can send out Text messages to designated telephone no.
But i thought UTA 3.5 could monitor the sms and phone calls going in or out of the phone. but it didnt seem to work. it crashed. and when you inserted a new sim it kept on asking whether i wanted to run the .exe file not very good.
Am testing out WIMP at the moment and seems to be ok.
but not alot of functionality if compared with UTA that is if UTA worked.
That would be a very good idea if you can input it into the ROM. but will you not have to mess with the registry to 'register' the product and keep your data.?
Well,
When I did a hard-reset last week, I observed that the device begins installing some software onto itself, just like it did when I first powered it up. May be we can cook up something into a cook ROM to do something identical? E.g. the settings required for MJ?
But then, I'm a noob at this stage (with a full time job and family). So, I'll have a very long way to go.
Cheers.

Noob with ???

First, this is a great site and I have looked at many threads. But I still need some help.
I got a sd card (4G) and started moving some file to the card like the owners manual said. But I guess I moved something I shouldn't as my phone went crazy. It wouldn't get a service signal and among other things.
So I preformed a HardReset and reset the phone. But that seemed to cause the same problem. So I researched the web awhile and read of an update for moble 6, so i downloaded and flashed my phone. Now the problem is that I can't perform a HardReset.
My ??? are:
What can I do to fix this?
And without getting a cooked ROM, are there any good "cab's" that would improve my phone?
ummmm i dunno of any actual cabs.... But why not a "lite" custom rom? since it sounds like your looking for memory.
I wasn't planning on a Rom, because I read that it voids the warrenty. But after finding out that my warrenty has expired and t-mobile won't do anything. Are there any current Roms that are good. Must have internet sharing.
I currently use OpenTouch Project 7.7 Lite, Its been smooth running with lots of free memory... But it doesnt have Internet sharing...I do believe that a CAB can be downloaded to get that option though.... itll just take me a bit to find a good one... If you want I can look. However...... I KNOW that ITsPapaBlack 6.1v2 has it as I have used it.... But I believe there are some windows vista isues
I think I know where to look to get the cab for internet sharing, but would I have to input the information that t-mobile put on the phone. Or would it be already on it with the cab? As for OpenTouch Project 7.7, where could I find info about it?
Her ya go man.... All OTP 7.7 Roms thats a link to the downloads... as for info TTrans OTP 7.7 Thread. And btw ANY info you need on the mo network is available via their website. you can get step by step walkthroughs on how to setup the network. but the OTP 7.7 has a network setup wizards so it should do it all for ya!
I believe most ROMs have the network wizard built in, so you should be fine. As far as light ROMs go, there's a few (most of my ROMs are lite, too.) If you want ultimate in space and RAM, JustME or Just2Clean might be a good choice. (70MB FREE of storage.) But really your best bet is to try different ones and see which ones you like best. Try a little opentouch, a little itspapa's, a little just's, etc and see what you like best.
Not to hijack a thread but I have tried the OpenTouch ROMs and I notice that the MS Direct Push is no longer available. Is that due to Office 6.1 not being loaded in that ROM?
Lance
Thanx for your input. I think I'll try a few to see how they work and which one fits my needs. Right now I am trying out some .cab's and picking the ones that helps.
Oh, and do any of those ROM's ha Internet Sharing? If not, I take it that I'll have to install a .cab. But if I do that, do I have to input the information so I can use it. This is important as IS is my only internet access. Thanx.
Not sure as I only use my own ROM. I know that my most of my newer ROMs have it and as long as you run the network wizard (which runs automatically on my ROMs) then it will work without any settings having to be inputed. Just read up on the ROM's thread and you'll find out if a particular ROM has it or not.
Well I had to send my wing back as the OK button was broken so I'm trying to acquire a new one. However I flashed the 7.5 of Open Touch and noticed that it wasn't there...I'll look around for the network wizard as I've been reading all the threads and didn't see anything on that. May I ask what ROM you run? When I get a new one I'll flash that and see what I get.
Thanks
Lance
Robertsonland said:
Well I had to send my wing back as the OK button was broken so I'm trying to acquire a new one. However I flashed the 7.5 of Open Touch and noticed that it wasn't there...I'll look around for the network wizard as I've been reading all the threads and didn't see anything on that. May I ask what ROM you run? When I get a new one I'll flash that and see what I get.
Thanks
Lance
Click to expand...
Click to collapse
I run a modified version of my own Just2Clean. (It was a test built but I haven't had a chance to change it in a while.)
JUst2Clean
ivanmmj said:
Not sure as I only use my own ROM. I know that my most of my newer ROMs have it and as long as you run the network wizard (which runs automatically on my ROMs) then it will work without any settings having to be inputed. Just read up on the ROM's thread and you'll find out if a particular ROM has it or not.
Click to expand...
Click to collapse
Ok, thanx. I do believe I took a quick look at your Just2Clean. So I think I look at it more in-depth.
Yeah I was thinking of looking at the Just2Clean and the JustMe ROM I think. youmanmike, if you load it up let me know what you think of it. I just bought a new wing on Ebay tonight so hopefully when it gets here I'll be able to flash it. I'd like to hear what you think about the ROM you go with.
Lance
Well youman mike.... looks like ya got plenty of info... Ive yet use any of the "Just" ROMS but I DO plan on making my own ROM eventually.... so his cooking class may help me! I start 3rd shift next week Ivan.... I may start you classes then =) Hopefully youll be around to answer my silly questions =P Let us know what ROM you flash and how it goes youmanmike!
ROM??? Looking at Manilla
I still haven't figured out what ROM to use. I kind of got side track on Manilla. I like the way it looks and from what I've read it sounds like it works good also. Now I'm trying to figure out how to use/install it. LOL

Categories

Resources