I had a bad rom upgrade and my ALPINE's stuck on splash screen.I could manage to take it in bootloader mode several times but when I tried to make a connection pc via usb cable it always has gone out from bootloader mode. I tried several times but the result was same.After a few days I couldnt take it in booTloader mode it just shows me a black screen.
I will be very happy if someone help me....
Related
So my mate owns an X1 and he tried flashing a ROM last nigth but somethings gone wrong and now it's stuck in bootloader mode.
I said i'd have a look at it for him to see if i could do anything.
I was thinking of trying the microSD flashing without the need of a PC as it won't sync, but then lies the problem of it turning on and going straight to bootloader.
When charging it turns itself on automatically and loads up bootloader then a white screen with blue loading text.
When ever i try putting it in bootloader mode on charge, it just goes straight to the loading screen and then goes off.
Anyone know a way of fixing or flashing new rom to fix it?
Any help would be much appreciated.
Thanks
Hi,
I tried to flash CM11 in my Phone with Odin but it gave a fail as result. So I tried it again with an other firmware but it wasn't possible.
Everytime I connect my Phone to my computer or to the charger is goes into a bootloop. It gives me a screen that says "firmware upgrade encountered an issue" for 2 seconds and it shutsdown, it restarts and give's me the screen with error back.
I think the problem is the CM11 I tried to flash is for an I8190 and I have an I8200 (I found that out to late
I have search google and this forum for 2 days but I didn't find a working solution.
I tried to get into recovery of dowload mode but that's impossible due to the boot loop.
Kies can't connect to my Phone. I checked my powerbutton and it's not stuck.
I removed the battery a couple of times for more than 2 hours, ...
Does someone know what I can do so get my Phone working again?
Hi all,
I use CM12 from MacLaw in combination with TWRP 2.8.1.0 recovery for about 3 weeks now.
Yesterday the phone didn't respond properly, was very very slow and I basically couldn't use the phone. It felt like the CPU was at 100% all the time, so unlocking the phone, calling and so was nearly impossible. A reboot (battery removal) didn't solve it, also the pin code for the sim card came after a few minutes while usually this will come right after starting.
So eventually I did a factory reset from the menu as I did on other occasions just to get rid of this kind of problems.
Well, right after the Samsung s3 mini logo I get the TWRP logo and it will be stuck in there, I see it blinking every few seconds and that's it. When I connect the phone to USB I hear it connecting-disconnecting every few seconds (bing-bong, bong-bing sound).
After a while I flashed TWRP using Odin again, this didn't give any problem but it will still hang in this TWRP loop.
I found some references to this problem but no real solutions. Someone suggested to use ADB but I don't know how to do that, nor could I find a suitable guide on this.
Can anyone help me? Or is it bricked somehow?? I suspect not, download mode is still working.
Thanks for any help!
Hey
yesterday i almost bricked or maybe bricked my phone. Accidentally changed partition from B to A. Today my phone boot only to nokia logo and stuck on it
Many hours readed about this phone back to life. Recover mode not work, fastboot mode not work. This phone one chance to turn off is completly battery discharge.
If no chance to get back this phone to normal i will get throw it to trash
Classic example of a softbrick can't really call it a hardbrick tbh. PM me all of the details and I'll later make a tutorial if we manage to fix it up.
mati5000 said:
Hey
yesterday i almost bricked or maybe bricked my phone. Accidentally changed partition from B to A. Today my phone boot only to Nokia logo and stuck on it
Many hours reading about this phone back to life. Recover mode not work, fastboot mode not work. This phone one chance to turn off is completely battery discharge.
If no chance to get back this phone to normal i will get throw it to trash
Click to expand...
Click to collapse
I did the same thing.
- Downgrade to Oreo
- unlocked officially bootloader
-fastboot boot twrp.img
booted to twrp- Flashed zip on both slot with latest twrp
Changed slot A to slot B and
we have same problem.
How did you solve your issue?
Did you wait for battery-drain?
Or other combination of buttons.
I tried all the button-combination without success.
Hope you could give advice
Regards
Edit: How to solve!
I simply waited until the battery ran out
When battery was completely dead and no Nokia-logo any more
Then I charged the battery 3% juice without booting
and from there I entered recovery-mode with the help of a USB cable.
Holding the volume+ button while connecting the USB-cable
From TWRP-recovery I changed to the other inactive slot
and whooala, that's it!
I have OEM unlocked my nokia 8 boot loader by nokia official method ,
Then I decide to flash twrp and magick
When boot twrp it give an error that locked
Then I checked some forums and find a way ,
I do what is guided in that forum
Change boot slot b to a ... and I flashed twrp then I flash rom , at the end of flash slide to reboot , then I reboot but after that there is no response in device it went blank and black.....
If I connected to PC in some flash tool it show hs com 3008 and connecting sound in pc but mobile being blank and i cant even get to fast boot mode becoz device get blank ( while connected in pc if I power on or hold power but connection sound will come from my pc but no device or unknown device )
Pls help friends, really dunno what to do
Pls help !
Respond soon pls
Same as me bro.. my ta 1004 is dead after unlocking bootloader official method. And i flash boot twrp and magisk. But my phone always bootlop. I try to flash with ost la. An qfil to recover. But i stuck in download mode. And i try to flash with twrp slide load .
And my phone is dead now.. i can do anithing. My phone can turn on now... i charge it .. but still not respond
Anyone help me
hello to all,
So my problem is that i got a black screen after i flashed with sp flash tool. I am not able to see anything on screen nor put it in recovery or fastboot. If i connect to pc you can here where the pc picks it up. But still cant see anything on the screen. Ive tried charging it, changing cables, reflashing because am able to put it in broom mode so the sp flash picks it up and the result always complets good with the green check mark but you can still not see anything in the screen. Did my screen burn out or what? Can you please help.