PLEASE HELP!! cant connect to the network :( - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Hey everyone ..
i was using my Blueangel normaly and so happy with it until i faced this problem before 2 days ..
I was texting my gf while i was out and kept on even though the battry gave me a warrny that its really low .. i ignored and kept SMS's her until it went off.
i went home charged my device but its not connecting to the network. it shows either "No Service" (where it shows X beside the signal tower) or "Searching" (where it shows ! beside the signal tower).
Please anyone knows how to turn it on im really in a bad situation here.
Note: just to let you know im using WM5 Hemi's rom and upgraded it today to Xplode's rom just hoping it would help.

Well when i tried another sim on my blueangel it worked and my sim card on another mobile it worked also. im really losing my brain

44 views no one have a slight idea..
anyways thanks alot everyone for visiting

Hi,
All I can suggest is to re-install radio rom! prob 1.15.
If not that then ensure flight mode is NOT active, and battery's fully charged
Also when you reset BA, on first screen does the R show a none?
If so reset, twice, its a common problem with BA and WM5, it isn't able to intialise the radio rom before WM5 boots.
It seems wierd that another sim worked on your BA, must be a faulty/damaged sim.
I also note you've tried the non-working sim on another phone and that works! Wierd that too!
Hope that helps,
Sunny

Have you tried to manually select the network in the "Phone" settings screen? I've heard of similiar problems being fixed by that.

well after i asked here and there and got disappointed with I-Mate people.. they know nothing at all
an IT in my company told me the problem is with my sim card. its damaged cause of the change in the battry power (as he says) it damaged the frequency that my mobile use to read the sim so there for it would work on any mobile except mine.
so i would change the sim but it needs me ages to get free and do that.
THANKS ALOT TO EVERYONE ATLEAST READ MY THREAD OR TRIED TO HELP
YOU GUYS HERE ARE THE BEST

By the way
sunny: the Radio is already 1.15 from ages. but thanks alot for trying to help me.
Fraser: I tried to manualy select the network but it says there is no network which is funny cause there is 4 networks in my area.. actuly im working with the same operator so im inside the tower LOL. the signal streth is the best here.
Thanks alot mates

No problem!
Thats what we're here for!
Regards

Same problem
I once had the same problem. Now I'm no genius when it comes to these phones and it actually took me a whole week to get an idea of what the hell happened to my phone. Basically, these phones are Quad Band (GSM 850/900/1800/1900) and for some reason after I upgraded I lost my signal. I found a little application that let me reselect my band (its not built into windows for some reason) and that solved my problem. I just selected "Auto select" and the problem was solved after a soft reset.
Now, I can not remember what that application was but maybe that can give you an idea of what to search for.

No Service issue
sunnyd24 said:
Hi,
.......
Also when you reset BA, on first screen does the R show a none?
If so reset, twice, its a common problem with BA and WM5, it isn't able to intialise the radio rom before WM5 boots.
...........
Hope that helps,
Sunny
Click to expand...
Click to collapse
Hi, is there more 'democratic' way to resolve this issue than reseting BA twice?
After installation of xplode's R4 for noobs an old version of R 1.06 was left on BA. Thinking that this was a reason for No Service of the phone I dumped latest R , but double f..reseting necessity still persists ...
Is that a normal thing to reset twice such an advanced device when you want even just to call smbdy? Thanks

there is a lil bug in my roms, after totally draining both bateries when you power it on it says NONE for radio you have to soft reset it again in order to work. I have never had a band selection problem but it is possible reason for this

xplode said:
there is a lil bug in my roms, after totally draining both bateries when you power it on it says NONE for radio you have to soft reset it again in order to work. I have never had a band selection problem but it is possible reason for this
Click to expand...
Click to collapse
Hi hi there! First of all please accept my deepest appreciation for such a great work you have done to make us - PPC ordinary users - little bit more happy Just one small note - is it possible to upgrade your downlodable R4 file with all necessary ROMs - Radio, etc., etc. With the intention that every Noob trying to upgrade his/her BA, should do it in a push of one button - not searching for separate latest ROMs and HowTo instructions? Thanks for your time!
P.s. Sorry it seems came out little bit off topic....

well it is possible but i have no time to do it. or you can try to copy the radio nbf file into the folder of the nk.nbf and run the upgrade utility

Any solution on this matter ? I am using Helmi MW6 ROM with radio 1.15.00 and i'm having the same problem.
I've searched the forum but found no solution yet.
JP

Related

Problem with WM5 on BA - No Radio...

Hi
Tried looking through all the threads and checking what I have done but still no joy hence post.
Have upgraded my old BA PH20B (I have another one so no panic) to WM5 with the latest WM2k5_AKU3.2_32mb_v1.3.2 setting Operator to ORANG001 (Orange UK).
1st time I tried everything seemed fine except although I had a signal from Orange I couldnt ring the phone (went to answer machine) and if I tried calling out the call disconnected with 0min 0sec calltime. I did receive a text message saying I had missed a call (me calling phone to test). But couldn't make or receive calls.
So I tried again from scratch twice and both times I have no signal and in Device Info have "Radio version: NONE" - followed instructions to the letter anyone any ideas?
Cheers
RichardC
ps. I can re-flash ROM OK.
this happened to me, too. but only when i changed batteries...
try to soft reset until the word NONE is replaced by the radio rom version (during boot up).
good luck!
Thanks for that, did soft reset and suddenly I have a radio ROM, so removed battery and inserted SIM then no radio again. Soft reset and radio back...weird
Now I can make calls and receive text but can't call phone (engaged or answerphone, maybe network I guess) but also GPRS connection info wrong so guess better start searching for info on that now. lol.
Thanks for the tip.
Check out my signature - use the links provided.
_TB_TB_ said:
Check out my signature - use the links provided.
Click to expand...
Click to collapse
Makes sense thanks...just the GPRS issue now. lol
Just stepped through GPRS settings not changing anything but clicked OK at the end and it works now. Looks like install didnt configure everything fully.
Weird issue I now have is dialling out cancels and yet the phone I dialled rings about 10 seconds later (very weird).
When receiving a call - nothing happens on the BA, no ringing down phone calling out from then when the network drops the call the BA makes a small burp sound. So it knows it should be ringing but something is stopping it.
Tried upgrade to 1.15 Radio ROM - same. So now going to try downgrade to original WM2003SE Radio ROM version (1.06) and see how that goes unless someone has another bright idea?
same issue here
I am now experiencing the same issue, suspect its battery related though...hope someone can come up with something better than that. :lol:
_TB_TB_ said:
Check out my signature - use the links provided.
Click to expand...
Click to collapse
You'll need to update those links for the new forum it seems.
Tried everything but although it all worked phone usage was inconsistant. Sometimes calling out works, sometimes just drops call with duration 00:00. Sometimes receives a call, other times goes straight to voice mail or un-obtainable tone even when signal fine and 2nd BA running WM2003SE works fine (same operator, Orange UK). Bluetooth also needed re-boot most of the time to be enabled. So reverted to WM2003SE for now .
just for comparison i have an xda iis that works fine phone and all and im in wm2k5......except cam doesnt work lol gunna fix taht later .....i used radio version 12.00
hirsty said:
just for comparison i have an xda iis that works fine phone and all and im in wm2k5......except cam doesnt work lol gunna fix taht later .....i used radio version 12.00
Click to expand...
Click to collapse
Thanks for that I tried 12 and then finally went back to standard WM2003SE radio version out of desperation. Nothing worked.
When I have the energy! I may try upgrading my other (newer) BA to see if that helps but first I need to backup my current ROMS as it works faultlessly under WM2003SE...why am I thinking of upgrading I ask myself
Alhumdulillah
everything is working fine for me
AKU 3.2 owns
CAM is fine
ricardo there must be some other problem i hope u didnt drop the phone too many times
looks more like a hardware problem to me
Hi
Phone is 100% OK with WM2003SE, so not a hardware issue...may try again soon, thanks for input.

Has anyone experienced this kind of Radio Problem?

Hello,
I've been a BlueAngel (SX66-Cingular Variant) user since a long time. It'd been working great. I re-flashed the original rom several times with the new BA updates/ roms from XDA's Ftp site and they all worked like charm.
ISSUE:
--------
Lately (since a month), I am experiencing some issues with it. It seems to be always searching for Network/ Service, all the time. An ongoing call will get disconnected. And very frequently i'll see a NO SERVICE notification. The NETWORK INDICATOR in the task bar will go to a High Strength and then Searching status. It is usually taking more than 30 mins to search the operator for me to make/ recieve any call. People trying to reach me inform me that my phone is Not Reacheable.
I've reflashed it to different BA ROM combinations but it didn't help.
I dont want to assume that it is a Hardware failure as i didnt do anything which can cause a damage to the instrument.
>>>>>>>>>>>>
What all can i try? What is the BEST SUITED ROM for this Device?
<<<<<<<<<<<<<
>>>>> ONE MORE QUERY :-
My Blueangel Back Cover Shows that this device is PH20B, but the ROM indicates that it is a PH20B1 Device. (This device is actually without a camera) Why do i see a difference here?
>>> USERS in INDIA or NCR Region: Is there any authorised/ recommended place i can get this device serviced?
Any help or suggestion is very much appreciated. Thank you all in advance.
- Harry
My SX66 is now Dead!! Pls. Help!
Desperate to fix this problem, i pulled the battery to power drain the BlueAngel. I even went a step ahead and shorted all the power connectors (which connect to battery) of the device with help of a metal needle. I placed the battery back and now the set is dead!!
I just can't believe this. How can i get this device powered on now??
Thank you all for help in advance!
-Harry
Try to plug into the power supply and see if it work. Let the phone charge for a while if it doesnt power up when u plug in. Try this and see if it work.
As for the "phone keep searching for operator" problem, I have the same problem too. Whenever I go underground and the phone lost signal, it will take forever to recover the signal. What you can do is to go to "Setting"->"Phone"->"Network" tab and select "Find Network" and the signal should recover.. Note to set the "Network selection" to automatic. I had encountered problem when I set it to manual where the phone will show good signal but call cannot come in.
hope this help...
cryptocoder said:
Desperate to fix this problem, i pulled the battery to power drain the BlueAngel. I even went a step ahead and shorted all the power connectors (which connect to battery) of the device with help of a metal needle. I placed the battery back and now the set is dead!!
I just can't believe this. How can i get this device powered on now??
Thank you all for help in advance!
-Harry
Click to expand...
Click to collapse
bioskoh said:
Try to plug into the power supply and see if it work. Let the phone charge for a while if it doesnt power up when u plug in. Try this and see if it work.
As for the "phone keep searching for operator" problem, I have the same problem too. Whenever I go underground and the phone lost signal, it will take forever to recover the signal. What you can do is to go to "Setting"->"Phone"->"Network" tab and select "Find Network" and the signal should recover.. Note to set the "Network selection" to automatic. I had encountered problem when I set it to manual where the phone will show good signal but call cannot come in.
hope this help...
Click to expand...
Click to collapse
Thanks a million Bioskoh! Your power supply suggestion got this device back to life.
I am still facing the network/ radio issue with this device. I already have Automatic set under the network selection settings. I am facing this issue everywhere... Even where the signal should be very strong. I dont know what else to do . Any other suggestion/s are welcome..
Thank you again! Viva la XDA-developers.
-harry
Any other suggestions please....
I have installed Radio 1.13.10 with 1.42 (T-Mob/NL), but this issue still persists. This device has become more slower and lazy in the past few months.
I am still mad at the phone function of this device. Once half of the battery is consumed, It wont even allow me to make/ recieve any call.
Someone on this forum please help. Is there any New ROM update from Siemens (>1.33 Rom) please?
Also friends, how is the stability of WM 2k5 on this device? Would you recommend installing it just to see if it fixes this issue?
One Last Question: What is the BEST ROM combination for this device? Also any customized Ext ROM with all the patches/ fixes included. Links to the location are greatly appreciated.
Thank you all again for your time and help!
-Harry
For WM03 on SX66, you can use the ROM from the SX66 Standardization Project website. Link: http://home.comcast.net/~sx66-blueangel/
As for WM05, I am using the Helmi WM05 AKU3.5 Ver1.4 ROM. It is quite stable. You can go to this website for detail: http://wiki.xda-developers.com/index.php?pagename=Helmi
You will need to have some patience and follow the upgrade procedure to make everything work good. Remember to read/search the forum for answers.
Have fun flashing your ROM!
cryptocoder said:
I have installed Radio 1.13.10 with 1.42 (T-Mob/NL), but this issue still persists. This device has become more slower and lazy in the past few months.
I am still mad at the phone function of this device. Once half of the battery is consumed, It wont even allow me to make/ recieve any call.
Someone on this forum please help. Is there any New ROM update from Siemens (>1.33 Rom) please?
Also friends, how is the stability of WM 2k5 on this device? Would you recommend installing it just to see if it fixes this issue?
One Last Question: What is the BEST ROM combination for this device? Also any customized Ext ROM with all the patches/ fixes included. Links to the location are greatly appreciated.
Thank you all again for your time and help!
-Harry
Click to expand...
Click to collapse
cryptocoder, a number of us have similar issues, but so far it has been restricted to Orange UK users.
Do you find that when you attempt to make an outgoing call that you get three short beeps at least 50% of the time? And that incoming calls either go to answerphone after a delay, or alternatively they fail with a number out-of-service tone?
Finally, do you have issues sending txt messages soon after a failed call. I get the message "The phone is not ready, please try again in 15 sec".

Why wont my touch diamond come out of standby ?

OK
had the touch diamond about 5 days ago. (no network) stuck my orange sim in it from my e650
In that 5 days it has twice failed to come out of standby. Nothing will get it to come alive apart from taking out the battery. Bit of a problem because i use it for alarm clock in morning.
The only things ive done to it so far are
Installed PHM reg editor
Installed PHM soft reset
Installed cab file to get rid of sms threading/conversation
Installed cab file to enable delivery notifications for SMS
Carried out reg hack to not show sim contacts (although thats now reset due to the battery coming out (I think))
Anyone else had this problem and got a fix? I tried pressing the standby/off button, holding the standby/off button pulling out the stylus etc
Hope I havent got dud hardware
Cheers
JP
same problem here with my mda compact IV from T-Mobile, just have the phone for 2 day's now, and it's 8/10 times now it would not come out his standby mode.
first thing i did when i got my MDA, is flashed it to A.Z.T.O.R. V7 Black Diamond Touch Edition.
So I'm kicking this thread up, hoping for some kind of solution of idea!?!?
hello,
thats not normal. use orig. rom from provider and check it again.
if the same than back to seller.
use reset to start the device again and not the battary put out/in.
iam not expert so see this answer only as a proposing.
okokur
Previous related thread?
Still not very happy with my phone so I might send it back to be checked.
i found another thread http://forum.xda-developers.com/showthread.php?t=436000&highlight=standby+freeze
I've had this exact problem, but the reset button on the back does work when this happens. I'm in the US on T-Mobile in NYC using a European Diamond. I work in a building that has very weak T-Mobile coverage and I've found that I only get the problem when I am at work. On the weekends and at night, the problem never happens because I am usually in an area that has either no coverage or good coverage. I have not eliminated the problem, but I have discovered that setting the network type to "GSM" and the band to "UMTS(850+1900)GSM(850+1900)" reduces the incidence of the problem for me to once every few days. I'd love to hear a good solution to the problem as well.
Click to expand...
Click to collapse
I have the same problem only at my work where I get almost no signal.
before my diamond a had a HTC Elf with the same problem only at my work, this phone is switched for a diamond with the same problem now.
I updated radio now, see what happends
The radio is updated to V. v1.00.25.05
i have much better signal now, and no problems at all.
I had the Standby of Death SOD this is when the phone fails to come out of standby with a power button press. This issue only affects some people on some networks. I'm not sure if its a network problem or a software problem but as only a minority of people have it, I suspect its mainly a network problem there is a software solution.
The solution is to change the phone settings band option from auto 3G/2G to either 3G Only (WCDMA + UTMS 2100 in Europe) or 2G Only (GSM + AUTO) depending on your requirements.
Also read this thread http://forum.xda-developers.com/showthread.php?t=540943&highlight=standby&page=2where the resolution was to get a new SIM.
Obviously this only solves the problem when the crash is because of the sim and/or settings which impact the sim. To rule out a software cause its best to start with a hard reset.

HTC Diamond WiFi issue, help needed

Hi all,
I wonder if anyone can resolve/give suggestion for my problem.
Basically i have experience problems connecting via Wi-Fi i.e the after activating wi-fi the phone will scan for available networks and give you the list. I then try to connect to my router (bt home hub which is actually speed touch) it does connect and stays connected for some time then suddenly the connection is dropped and under wifi it says that my access point is unavailable. If i turn wifi off/on again and scan for networks it comes up with "No visible Networks detected" even though there are like 5 access points in my house and i can connect to any of them using my laptop and old nokia e60. If i wait a while it will connect again but will not keep the connection. I have tried at home, work and some public places-every time is the same story.
Things i tried:
Soft reset/hard reset (many times)
Tried disabling phone radio in case3g chip interrupts
I tried with secure networks, open networks, different types of authentication/encryption, different router (more than 10) and every its the same story. I also tried several ROMS and ALL RADIO's available with the same result.
I am currently on Duttys_Diamv2.3 WWE RADIO 1.00.25.08, its a clean flash, nothing else is installed. I also have SPL-1.40Olinex installed (not sure if that could have an impact) The phone is vodafone branded btw (i had the same issue with vodafone rom which is why i decided to try other roms). I wonder if anyone has any thoughts/suggestions and would appreciate any help. Thanks in advance.
The same situation happened to my Diamond. I took it to the local dealer for HTC and after several days, I am told that the main board will need replacement. I am still waiting for it to be repaired as the parts had to be braught in from another country. I was also saud if the phone was less than a month old (which it is not) they would have replaced it with a new phone.
Good luck repairing yours and keep us updated.
omar302 said:
The same situation happened to my Diamond. I took it to the local dealer for HTC and after several days, I am told that the main board will need replacement. I am still waiting for it to be repaired as the parts had to be braught in from another country. I was also saud if the phone was less than a month old (which it is not) they would have replaced it with a new phone.
Good luck repairing yours and keep us updated.
Click to expand...
Click to collapse
Thanks Omar, I was kinda thinking that it may be hardware issue, but I don't anymore, I am trying something else actually as we speak. The only thing I haven't tried before is another hard SPL and I think that's the problem, I installed another version hspl1.34 and it seems more stable now and wifi keep connection, also with another hspl version (it was hspl 1.24) RAM under devise info>hardware showed 128, now it is 192. I will test in intensively and post my results here in case nay one else have the same issue. Hopefully I will not have to send it away for repair. Thanks for your info anyways.
In risk of sounding lame ...
Have ya tried 'Start' / 'Settings' / 'System' 'Wireless LAN'
Under Wireless LAN click 3'rd tab (strømtilstand in Danish - could be power-settings)
On that tab - pull the marker way to the left in order not to minimize the power consumption when tryng to hookup with the WiFi.
I had massive problems to get my local WiFi working at home - until I did this trick.
Best luck, Kindly
Kwasmir said:
In risk of sounding lame ...
Have ya tried 'Start' / 'Settings' / 'System' 'Wireless LAN'
Under Wireless LAN click 3'rd tab (strømtilstand in Danish - could be power-settings)
On that tab - pull the marker way to the left in order not to minimize the power consumption when tryng to hookup with the WiFi.
I had massive problems to get my local WiFi working at home - until I did this trick.
Best luck, Kindly
Click to expand...
Click to collapse
Yes i have thats the first thin you do anyways . I am now more than sure that the issue was with HSPL version 1.34, as soon as i got rid of it (installed hspl 1.24) all is fine.
With my phone, i tired all Hard SPL versions and even went back to stock SPL & Rom 1.37 & 1.93 and it still didn't fix the WIFI issue. it will work for 5-15 minutes then it will not work.
Anyway, I got a replacement phone as apparently they couldn't fix it.
pufeks said:
Hi all,
I wonder if anyone can resolve/give suggestion for my problem.
Basically i have experience problems connecting via Wi-Fi i.e the after activating wi-fi the phone will scan for available networks and give you the list. I then try to connect to my router (bt home hub which is actually speed touch) it does connect and stays connected for some time then suddenly the connection is dropped and under wifi it says that my access point is unavailable. If i turn wifi off/on again and scan for networks it comes up with "No visible Networks detected" even though there are like 5 access points in my house and i can connect to any of them using my laptop and old nokia e60. If i wait a while it will connect again but will not keep the connection. I have tried at home, work and some public places-every time is the same story.
Things i tried:
Soft reset/hard reset (many times)
Tried disabling phone radio in case3g chip interrupts
I tried with secure networks, open networks, different types of authentication/encryption, different router (more than 10) and every its the same story. I also tried several ROMS and ALL RADIO's available with the same result.
I am currently on Duttys_Diamv2.3 WWE RADIO 1.00.25.08, its a clean flash, nothing else is installed. I also have SPL-1.40Olinex installed (not sure if that could have an impact) The phone is vodafone branded btw (i had the same issue with vodafone rom which is why i decided to try other roms). I wonder if anyone has any thoughts/suggestions and would appreciate any help. Thanks in advance.
Click to expand...
Click to collapse
...I have the same problems with you
However, I think the problem may caused by different ROM versions.
My hTC version Diamond initially flashed a Chinese version ROM, and the WiFi connects well, while I changed to Dutty's most updated ROM, this problem comes and I cannot figure out why untill now.
Some friends also suggested to go to the Power Management and change WiFi to "Best Performance", I tried and failed again.
WiFi can open and connect to Routers located in library of my university, nevertheless it cannot open any pages.
I'm also waiting for any person that can solve the problem and then help us figure out why....
thanks in advance!
I got the same problem as most of the people have. and i think "Fail to turn on wifi" is a very common among guyz who got HTC TD.
I dont know what should be done, i almost tried every thing. actually my phone was locked to 3 mobile Sweden and i unlocked it but my wifi was'nt working before unlocking too but i did'nt gave attention to it. Now i noticed it.. is that any one know how to lock it again soo that i can send my mobile for repairs or, any one know what should i do.
I would recommend upgrading your radio and your rom.
Ive been rocking the setup in my sig for some weeks now and its been flawless, stable and fast.
which rom and radio you are using. can you please help me in this matter.
and i think its not a hardware problem because its showing that hardware is connected to my device as its shown in the screen shoot
Hi,
Im using AlphaZero V7 NLD,
Im have 1 wifi point in my house, downstairs.
even when im on the attic i have 80% signal strengt.
My router is a draytek 2820G router.
Wifi for me is very good. .. correctly, AZTOR V7 NLD is very good for me.
im on t-mobile network.
Radio Radio v1.00.25.05 , Radio v1.00.25.08, Radio v1.00.25.16, where all good,
now testing Radio v1.08.25.20, HDSPA signal is bit weaker atm.
my best radia atm i think, v1.00.25.08.
im betting, that the starter of this toppic, who has 5 access points in his house all have the same SSID. This is not the way.
Or make 1 big AP aera, bij connecting the AP's to each other.
of try to set every AP its own SSID, and its own Channel.
Louis
WIFI problem in HTC Diamond.........
I am trying connecting to my home wireless network. It finds the network but unable to connect to it. Any help please? Has anyone managed to get it connected to any Wifi? I ahve already set the power management to "best performace...no succes.......
(My laptop and O2 stealth does get connected to the same network and it an open wifi connection)...........PLZ Help.....
pranavsethi said:
I am trying connecting to my home wireless network. It finds the network but unable to connect to it. Any help please? Has anyone managed to get it connected to any Wifi? I ahve already set the power management to "best performace...no succes.......
(My laptop and O2 stealth does get connected to the same network and it an open wifi connection)...........PLZ Help.....
Click to expand...
Click to collapse
i am also having this problem, it can find the network, and can spend a minute or 2 trying to connect, and nothing happens. you posted this in february, did you find an answer?
Wifi & Bluetooth not detected by HTC Diamond
Someone pl help. My HTC Diamond is not detecting bluetooth devices neither is detecting wifi. It was earlier doing so and working fine however I believe after installing tweak TD & t3d config it has stopped working. I have installed new ROM also but to no avail. Can someone pl help!!!!!!!!
Wintermoonlight said:
i am also having this problem, it can find the network, and can spend a minute or 2 trying to connect, and nothing happens. you posted this in february, did you find an answer?
Click to expand...
Click to collapse
i also have the same problem. it detects a wifi (my router at home Aztech brand), then trying to connect to it, and then it always showed the wifi as "unavailable". i put my phone 2 mm distance from the antenna of my router it also won't connect. i have change dozens of roms, win 6.1, 6.5, 6.5.1, different cook, MTTY, all with no success.
i've looked for internet and google for answers, i seen quite a lot of forum has described this issue, but with no solution. most of the ppl suggest in various forums to pull the wireless slider to "Best Performance", ofcourse i have done that, but is just the same result.
i'm still trying searching for a solution for this, i hope is not a hardware issue because my warranty has already ended. i'm currently using Gen Y R4.1B rom
pufeks said:
Yes i have thats the first thin you do anyways . I am now more than sure that the issue was with HSPL version 1.34, as soon as i got rid of it (installed hspl 1.24) all is fine.
Click to expand...
Click to collapse
Ok consider now wifi will work by re-flashing the spl.
But what is the relation between spl (os/winmo loader) with wifi?
another dang unsolved diamond wifi?
bravo.
same problem with wifi on diamond2
With Original stock WM6.1 i was unable to connect at all, after flashed official WM6.5 upgrade everything worked fine. However i decided to put cooked rom because of battery life and perfomance issues. Dutty HG6 for Topaz seems to be with glitchy radio, it works sometimes, very rare, and i'm still not up to the pattern when does it happen and why. Pretty sure it's not a hardware problem - so everybody relax, we will find the solution.
which rom and radio you are using. can you please help me in this matter.
and i think its not a hardware problem because its showing that hardware is connected to my device as its shown in the screen shoot
wjenya said:
With Original stock WM6.1 i was unable to connect at all, after flashed official WM6.5 upgrade everything worked fine. However i decided to put cooked rom because of battery life and perfomance issues. Dutty HG6 for Topaz seems to be with glitchy radio, it works sometimes, very rare, and i'm still not up to the pattern when does it happen and why. Pretty sure it's not a hardware problem - so everybody relax, we will find the solution.
Click to expand...
Click to collapse
nope, i also put Gen.Y WM6.5 then the problem still arise.
i'll wait any solution until my diamond is totally wrecked

GSM not working but 3G works

Hey. Today is not my day
My phone wont work with GSM anymore, it works well with 3G but when it tries to connect to a GSM network it just dies :/ i have no clue what it could be. It was working well yesterday, i have tried to do a hard reset but still wont work. any ideas? Thanks.
Sorry for bad english!
by the way, there is a strange sound in the speaker when it tries to connect to a GSM network.
and it doesnt die if i have it on charge.
has you have set the telefonsettings to gsm network or to automatic?
My phone also needs the manual setting to GSM.
fraham said:
has you have set the telefonsettings to gsm network or to automatic?
My phone also needs the manual setting to GSM.
Click to expand...
Click to collapse
On automatic it sets on 3G becurse i got 3G here, and if it losts the 3G connection and tries to connect to GSM it dies. ( thats how i found out about this problem on the way too school this morning. )
in my network i observe problems with connects to GSM: Sometime i lost the GSM connection/signal, where my Wizard has a safty connection.
It can be a standard Problem with the current Radio ROM
I think about change the radio ROM. pse look to Diamond ROM development to find a instruktion. the ".25.05" should be the best Radio Rom with a better energy performence and better Signals. http://forum.xda-developers.com/showthread.php?t=407956
BUT i have not change in this time, while i test my Battery performance after a reducing of background software/applications.
fraham said:
in my network i observe problems with connects to GSM: Sometime i lost the GSM connection/signal, where my Wizard has a safty connection.
It can be a standard Problem with the current Radio ROM
I think about change the radio ROM. pse look to Diamond ROM development to find a instruktion. the ".25.05" should be the best Radio Rom with a better energy performence and better Signals. http://forum.xda-developers.com/showthread.php?t=407956
BUT i have not change in this time, while i test my Battery performance after a reducing of background software/applications.
Click to expand...
Click to collapse
Yea, but how come it just pops up this morning and the phone just dies completly when it connects to GSM? :S i have the .03 radio, and about upgrading that i dont know if i want to, what about guarantee and such if it wont fix the problem? i still can return it back. I dont want to loose warranty.
Thanks
w3pp3 said:
Yea, but how come it just pops up this morning and the phone just dies completly when it connects to GSM? :S i have the .03 radio, and about upgrading that i dont know if i want to, what about guarantee and such if it wont fix the problem? i still can return it back. I dont want to loose warranty.
Thanks
Click to expand...
Click to collapse
die completly = shut down/swith of the Diamond?
This i not have obervate.
If you follow the instructions, the Radio update is out of problems. If you will get the old radio version, so you can get it back with the original provider update of ROM.
for german Vodafone there is a download by vodafone.de under "technischer Support". i think the most providers has a update download. Look to your provider, if there be a ROM update.
fraham said:
die completly = shut down/swith of the Diamond?
This i not have obervate.
If you follow the instructions, the Radio update is out of problems. If you will get the old radio version, so you can get it back with the original provider update of ROM.
for german Vodafone there is a download by vodafone.de under "technischer Support". i think the most providers has a update download. Look to your provider, if there be a ROM update.
Click to expand...
Click to collapse
Yes it completely dies, like a shortcut
I'll have too check it out, im from .SE so i'll need to find a radio that works here then?
Thanks
before you look for a new Radio, make a reset or a hard reset. My be, that it "repair" your problem.
By my WIZARD i has update the Radio.
I think, that the radio ROMs for the Diamond are also standards (how by the WIZARD) without differences.
Radio ROMs look to:
http://forum.xda-developers.com/showthread.php?t=407956
or
http://forum.xda-developers.com/showthread.php?t=432770
Instruction for Flash: http://forum.xda-developers.com/showthread.php?t=416211
in this both threads must be a information for select the right Radio Rom.
fraham said:
before you look for a new Radio, make a reset or a hard reset. My be, that it "repair" your problem.
By my WIZARD i has update the Radio.
I think, that the radio ROMs for the Diamond are also standards (how by the WIZARD) without differences.
Radio ROMs look to:
http://forum.xda-developers.com/showthread.php?t=407956
or
http://forum.xda-developers.com/showthread.php?t=432770
Instruction for Flash: http://forum.xda-developers.com/showthread.php?t=416211
in this both threads must be a information for select the right Radio Rom.
Click to expand...
Click to collapse
Thanks for the advices!
Now im damn happy. for some reason it works like a charm again, i just had to fully charge the battery... :S dont know what went wrong. :s
I will stil flash my device tho : P
Thanks alot!
OK, i hope you get a better Signal after changing the Radio version.
so as i have read, is version 05 the optimal version with stable signal and lower battery consumption.
pse read self the linked threads to find your optimal Radio ROM.
fraham said:
OK, i hope you get a better Signal after changing the Radio version.
so as i have read, is version 05 the optimal version with stable signal and lower battery consumption.
pse read self the linked threads to find your optimal Radio ROM.
Click to expand...
Click to collapse
I will thanks for your help!
I just flashed unsigned HardSpl and it works so far
Thanks!
OK, i'm happy, that i can help you...
good night and greetings
Frank
I said it was working... yea it WAS while it got 100% battery power, when it sinks the GSM net losts connection, and when the battery is under approx 60% the phone starts to die.. anyone got any new tips today? : )))
hi all,
got this damn problem now too, yesterday and the 2 months before all works fine, and now ive got no gsm signal, 3g works but gsm not. did anyone found a reason? i try all... reflash radio (different versions) soft and hardreset but nothing works
please help me if anybody can
TomDaDj said:
hi all,
got this damn problem now too, yesterday and the 2 months before all works fine, and now ive got no gsm signal, 3g works but gsm not. did anyone found a reason? i try all... reflash radio (different versions) soft and hardreset but nothing works
please help me if anybody can
Click to expand...
Click to collapse
Hey, I did never solve the problem, i have sent mine back on warranty so i hope HTC will fix it for me.
No flashing will fix this problem, so you dont need too try that anymore.
I did all i could think of and didng make it so i let HTC fix it for me
If they say something about whats was wrong when i get it back i will tell you
w3pp3 said:
Hey, I did never solve the problem, i have sent mine back on warranty so i hope HTC will fix it for me.
No flashing will fix this problem, so you dont need too try that anymore.
I did all i could think of and didng make it so i let HTC fix it for me
If they say something about whats was wrong when i get it back i will tell you
Click to expand...
Click to collapse
hi,
i dont know whats going on with my device
today at my home in the morning nothing works, one hour later exactly at 8 o' clock when i arrived my work all WORKS, i've got the gsm signal under 1 second (yesterday at night my diamond search over 10 minutes for gsm signal, then it cames, but no gprs connection was possible). now i was very angry because i do a hard reset yesterday and i had to install and copy over 2 gb of data!
TomDaDj said:
hi,
i dont know whats going on with my device
today at my home in the morning nothing works, one hour later exactly at 8 o' clock when i arrived my work all WORKS, i've got the gsm signal under 1 second (yesterday at night my diamond search over 10 minutes for gsm signal, then it cames, but no gprs connection was possible). now i was very angry because i do a hard reset yesterday and i had to install and copy over 2 gb of data .
****ing htc! (sorry to say that because i loving my diamond and other devices so much)
Click to expand...
Click to collapse
Mine did work when i have a fully charged battery, but when the power dropt it just died again
w3pp3 said:
Mine did work when i have a fully charged battery, but when the power dropt it just died again
Click to expand...
Click to collapse
i read your problem....
but now iam really going crazy, now i arrived @ home from work....
now what do you think... NOTHING works now... it looks that i have a anti gsm antenna @ my home
but i think its a software issue... i try now to reflash my original tmobile stock software with radio ( i do this 1 month ago because i became this error now for the second time)
hope it helps - i will post the results....
it IS a software issue!
now after reflash to original stock 1.37 + stock radio 1.03 , gsm connection works immediatly!!!!
hope this info help other poor guys which have this ****ing !!BUG!!
greetz
Congrattulations )
Im still waiting for HTC too fix mine : P

Categories

Resources