Unsuccesful Unlock - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I buy unlocked tool from unlockitnow.com.
I try all instructions how they write.
I have an Internal Error.
What is a problem?

CID unlock.. enable RAPI?

hanmin said:
CID unlock.. enable RAPI?
Click to expand...
Click to collapse
I use to pay them for the service and it seems that they send to me the same lokiwiz2 that is usually offered in this site as free.
I use to contact first imei-check.co.uk and they wrote me back with the following:
Hello,
they do support it (not listed as O2 but is same as this one):
http://www.unlockitnow.com/Qtek/9100.php
The service uses the technology from us so it is SIM and CID unlock for G3 and G4 devices with ANY firmware in ANY language.
Regards,
IMEI-CHECK Team
Any help from someone???

Do you know the EnableRAPI.cab file you are suppose to run on the phone. Whats the steps you've used.
And.. if you were to be a bit more hardworking searching through the forum ... or just going through the wiki, probably you've got it done by now and save you a few $$. read the wiki, top horizontal bar, "XDA-Wiki".

hanmin said:
Do you know the EnableRAPI.cab file you are suppose to run on the phone. Whats the steps you've used.
And.. if you were to be a bit more hardworking searching through the forum ... or just going through the wiki, probably you've got it done by now and save you a few $$. read the wiki, top horizontal bar, "XDA-Wiki".
Click to expand...
Click to collapse
Dear All,
With the help of www.imei-check.co.uk I did unlocked my G4 device. I use to pay for the www.unlockitnow.com and they send to me faik tool, the one that is provided for free in this website.
Thank you again www.imei-check.co.uk

Related

Sorry peeps another noob question

I have a vodafone U.K G4 Wizard,i understand some are CID locked some are not.I cant find any info explaining how i can tell though,should i just try and flash to another operators rom and if it refuses its locked?The phone is sim unlocked.
Cheers Tony
maxoutput said:
I have a vodafone U.K G4 Wizard,i understand some are CID locked some are not.I cant find any info explaining how i can tell though,should i just try and flash to another operators rom and if it refuses its locked?The phone is sim unlocked.
Cheers Tony
Click to expand...
Click to collapse
If you personally haven't unlocked it it is most likely CID locked. For a G4 you will have to go to the pay site to CID unlock.
There is also a G4 sub-forum of the Wizard forum that might have a good bit of information that you would find useful.
maxoutput said:
I have a vodafone U.K G4 Wizard,i understand some are CID locked some are not.I cant find any info explaining how i can tell though,should i just try and flash to another operators rom and if it refuses its locked?The phone is sim unlocked.
Cheers Tony
Click to expand...
Click to collapse
Use this app http://forum.xda-developers.com/showthread.php?t=295038 to read the CID block and report its status
Nice one Mestrini! Just checked and as suspected its CID locked,damn,blast and phoo lol.

how to do???

i had a question is there any way to do a superCID withou paying or do i have to pay for it thanks?
luis_valerio said:
i had a question is there any way to do a superCID withou paying or do i have to pay for it thanks?
Click to expand...
Click to collapse
You must pay and you can have it for free... (check the Wiki)
luis_valerio said:
i had a question is there any way to do a superCID withou paying or do i have to pay for it thanks?
Click to expand...
Click to collapse
If you have a G3 you can do it yourself for free, read the stickies to find out how.
If you have a G4 you will have to pay for Super CID. There is currently no known way to unlock a G4 without paying for it. You can however use the shelltool to bypass the CID check when flashing. This has mixed results from those that use it so I would suggest talking to those that have actually used this to see their results, or suggestions.
If you don't know which you have read some more before you attempt to flash anything. Doing G3 steps on a G4 device could very well brick your device beyond recovery.
i have done that the thing is that i believe i did unlock it but i can flash to like a hardspl like others do i only can for like wizard Wm6 what can i do
luis_valerio said:
i have done that the thing is that i believe i did unlock it but i can flash to like a hardspl like others do i only can for like wizard Wm6 what can i do
Click to expand...
Click to collapse
You guys must help us help you and that includes writing in real ENGLISH (punctuated) and be clear about your issues and desires...

unbranding cingular 8125?

hey im new here...
i was wondering i have a cingular 8125 and was wondering if possible to unbrand the cingular logo and stuff on the phone? also how would i go to upgrade the 8125 to windows mobile 6? thanks!
READ... Check the WIKI .. all the information you need is there.. READ, read and READ some more... if you don't read and learn all you can about upgrading your phone you WILL destroy the device.
5kunk2 said:
hey im new here...
i was wondering i have a cingular 8125 and was wondering if possible to unbrand the cingular logo and stuff on the phone? also how would i go to upgrade the 8125 to windows mobile 6? thanks!
Click to expand...
Click to collapse
Everything you need to know -- and all the files to do it -- are in this thread. Read every word and go through each step -- without skipping ANYTHING -- and you will be unlocked and ready to flash a WM6 ROM. There are several of those you can choose from here.
forget to mention my phone is already unlocked...im in canada right now so i got it unlocked to use their network services.
5kunk2 said:
forget to mention my phone is already unlocked...im in canada right now so i got it unlocked to use their network services.
Click to expand...
Click to collapse
your phone may be SIM unlocked but it also needs to be CID unlocked (to put non-cingular roms on phone). heed the advice of the other members on here cause if not, you will brick your phone.
so the first thing i do is cid-unlock before i do anything else?
yup, make sure it is CID unlocked.. there are tools to do it in these forums, or you can pay 40 dollars to www.imei-check.com and do it there.
5kunk2 said:
so the first thing i do is cid-unlock before i do anything else?
Click to expand...
Click to collapse
Before you do anything I suggest figuring out if you have a G3 or a G4 as which type will determine how you can unlock your phone. If you attempt the G3 instructions on a G4 you will most likely brick your phone.

Unlocking & Flashing for Newbies

Apologies for asking what most of u will think is dumb questions. I've searched the site and Googgled but haven't found definitive answers to these questions so will venture to ask the experts on here. I have a Kaiser purchased from and branded Orange:
I've read about SIM and CID unlock - can anyone explain theses and tell me how to unlock this phone for any network without killing it - yes i know i have to accept certain risks.
Once I've done that I want to flash the ROM. there a few guides on here but they seem to be written for tech minded people. I'm not a complete dunce but i don't wanna risk £400 getting it wrong.
I have found a few ROM's that i fancy and am sick of the crappy Orange flavour.
Please help me?
To flash different ROMs you want to CID unlock your device:
http://forum.xda-developers.com/showthread.php?t=334679
To use any carriers SIM card you need to SIM(aka Subsidy) unlock the device. There are a few places that will do it for a fee. I believe there are some references on the forum for people you can find with a search to do it or you can try:
http://www.imei-check.co.uk/
Ok thankyou - that helps - which should i do 1st - CID or SIM - or doesnt it matter?
Doesn't matter
PsyOpWarlord said:
To flash different ROMs you want to CID unlock your device:
http://forum.xda-developers.com/showthread.php?t=334679
To use any carriers SIM card you need to SIM(aka Subsidy) unlock the device. There are a few places that will do it for a fee. I believe there are some references on the forum for people you can find with a search to do it or you can try:
http://www.imei-check.co.uk/
Click to expand...
Click to collapse
has anyone else used imie-check.com? Am just cautious on parting with my monies - and the personal details they want as back up.

Downgrade to 6.0

Hello,
how can I downgrade a AT7T tilt 8925 WM6.1 to Wm6.0 I want to unlock it.
Do I need to have a sim card in the phone to unlock it?
no. but you need to run simlock.exe which is in the windows folder. All of it's right here http://forum.xda-developers.com/showthread.php?t=361039
(a la bill lumbergh) If you could just go ahead and RTFM that would be terrific.
ich-t said:
Hello,
how can I downgrade a AT7T tilt 8925 WM6.1 to Wm6.0 I want to unlock it.
Do I need to have a sim card in the phone to unlock it?
Click to expand...
Click to collapse
Are you sure you have 6.1? AT$T has not released a 6.1 upgrade for the Tilt. If you are sure that you have 6.1, then it must be a cooked rom . In that case all you have to do is re-flash to whatever rom you want.
ich-t said:
Hello,
how can I downgrade a AT7T tilt 8925 WM6.1 to Wm6.0 I want to unlock it.
Do I need to have a sim card in the phone to unlock it?
Click to expand...
Click to collapse
if all you want to do is sim unlock your device than the only thing you need to do is pick up the phone and call att. The will give you the unlock code with in 5 minutes. (just tell them you are going over seas and need the unlock code).
If however you want to flash a rom to your device .. than you need to flash hardspl; a simple search "hardspl for kaiser" will pull all info you need. and after that you need to read the kaiser wiki section on rom flashing.
Once you have full understanding of what you are doing than happily proceed
I look at the my Rom version and it is 1.57.502.2.
and my Radio Version is a 1.27.12.11
So is that a WM 6.1 or just a 6.0.
if all you want to do is sim unlock your device than the only thing you need to do is pick up the phone and call att. The will give you the unlock code with in 5 minutes. (just tell them you are going over seas and need the unlock code).
Click to expand...
Click to collapse
Thanks, but I bought this phone on ebay used. So I do not have a contract and I want to use it with t-mobile
ich-t said:
I look at the my Rom version and it is 1.57.502.2.
and my Radio Version is a 1.27.12.11
So is that a WM 6.1 or just a 6.0.
Thanks, but I bought this phone on ebay used. So I do not have a contract and I want to use it with t-mobile
Click to expand...
Click to collapse
That is the original AT$T 6.0 rom . AT$T has not yet upgraded that rom to 6.1
If you want to unlock your phone to use on another carrier, just follow the steps on this wiki:http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
denco7 said:
That is the original AT$T 6.0 rom . AT$T has not yet upgraded that rom to 6.1
If you want to unlock your phone to use on another carrier, just follow the steps on this wiki:http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
Click to expand...
Click to collapse
ne of the steps are
"Do not try this on 6.1! You will need to downgrade to 6.0"
Wow you diggin in the graveyard
I have WM61 on my Tilt. I also have my unlock code from ATT. Where do I input the code?I was told there would be a window asking for my unlock code. Instead I get the phone stating I can make emergency calls.
Where do I input my unlock code? Does anyone know?
also tried simlock.exe in windows and it said code for region verified but then nothing else happened and i cant open the program again..can i downgrade to 6.0 somehow without using software because i am out of the states and i dont have the cord to connect to computer...also i have a mac so it wont work anyways..thanks for any help..i have searched all over but cant seem to find anyhting
http://forum.xda-developers.com/showthread.php?t=402393
yeah i read that..i did it.....now my att sim cant be recongnize...and my other sim cant be recongnized....any ideas?...
I have read soo many things that I think my eyes are starting to bleed. I have read so many things that make me question which is the most current. I think I am ready to do something then I read.
stylez said:
Wow you diggin in the graveyard
Click to expand...
Click to collapse
Can someone please help me figure out what to do? Do I, or do I not downgrade before I can sim/cid unlock?
My current phone is
R 1.65.21.18
G 25.88.40.05h
D 3.57.00.00
I have already loaded the Hard SPL, and am wanting to Flash soon. I have been reading for the last 4 days, and keep reading so many admins telling us to search and read, but there is soo much info out there, that it is hard to tell what is needed.
Also, Can someone explain the difference between a cid and superCID?
Liquidd.
Just make sure you have the proper hardspl for 6.0 and make sure you follow
http://forum.xda-developers.com/showthread.php?t=433835
and you are done.
You really should read until your eyes actually bleed. j/k
That worked great. Thanks a lot.
Liquidd

Categories

Resources