Database Develop

SPL downgrade?

Heloo brothers....
I just want to know is there any SPL downrgrading techniqe avilable?
my pda's specification are as follows
ipl 3.08
spl 3.08
gsm 02.19.11
os 2.21.2.6
I am unable to install wm6 nor T -mobile's orginall ruu working is there any way to install 1m6 on my machine...i am new user so i need help plzzzzz.

I want kno the same thing.
Is there a tool to downgrade just the SPL/IPL alone without changing anything else or still downgrading the OS ROM is the only way?

freeyayo50 said:
I want kno the same thing.
Is there a tool to downgrade just the SPL/IPL alone without changing anything else or still downgrading the OS ROM is the only way?
Click to expand...
Click to collapse
there are several tools that will end up by giving you what you want but you must build the RUU yourself.
HOW:
Get an RUU with the IPL/SPL version you want (be carefull with the G3/G4 difference!!!!)
Extract the nk.nbf from the updater and then extract the chunks (you can use my tool or typho5.exe)
Get nb2nbf_tornado.exe and make your own nk.nbf with IPL/SPL only
Pack it again inside an RUU updater and use it to flash
That's it
cheers
PS:
Use the search to feature to learn about "nb2nbf_tornado.exe"

mestrini said:
there are several tools that will end up by giving you what you want but you must build the RUU yourself.
HOW:
Get an RUU with the IPL/SPL version you want (be carefull with the G3/G4 difference!!!!)
Extract the nk.nbf from the updater and then extract the chunks (you can use my tool or typho5.exe)
Get nb2nbf_tornado.exe and make your own nk.nbf with IPL/SPL only
Pack it again inside an RUU updater and use it to flash
That's it
cheers
PS:
Use the search to feature to learn about "nb2nbf_tornado.exe"
Click to expand...
Click to collapse
Or you could flash the lowest T-mobile rom you can find, it should put you back to 1.08 or something like that!!! When i have to downgrade i always get these!!! Then you just upgrade your OS again to what you want and there you go!

I have a HTC Wizard G3. Can I use Button Wizard ROM's SPL/IPL?
I used nb2nbf_wizard.exe to make what's in the attached picture. Does it look correct?
Also, I have nb2nbf_tornado.exe & nb2nbf_wizard.exe...are they the same thing. There both v2.02.

It looks fine to me. post results after, plz
...and check my signature tx

mestrini said:
It looks fine to me. post results after, plz
...and check my signature tx
Click to expand...
Click to collapse
Great!! I deff will.
When using your Wizard Service Tool, if i do Read ROM-->SPL...will this also read the IPL as well??
I want to know so I can just do a Write ROM---->SPL to restore both after I downgrade to SPL/IPL 1.xx.

freeyayo50 said:
Great!! I deff will.
When using your Wizard Service Tool, if i do Read ROM-->SPL...will this also read the IPL as well??
I want to know so I can just do a Write ROM---->SPL to restore both after I downgrade to SPL/IPL 1.xx.
Click to expand...
Click to collapse
nope. IPL is not readable via RAPI/TRUEFFS tools like my tool, only via boot loader and SD card i guess...

mestrini said:
nope. IPL is not readable via RAPI/TRUEFFS tools like my tool, only via boot loader and SD card i guess...
Click to expand...
Click to collapse
Oh ok. Then how would i make a backup of my SPL/IPL. I looked at aWizard, but it doesn't support it.

freeyayo50 said:
Oh ok. Then how would i make a backup of my SPL/IPL. I looked at aWizard, but it doesn't support it.
Click to expand...
Click to collapse
no it doesn't. aWizard is based on same apps as my tool; in fact aWizard is where i got my inspiration from (thanks ahlok_hk )
as i told before, only using mtty and boot loader commands to make a full backup to the SD card, but for that the phone must be CID unlocked
But IPL/SPL are generic so you just grab a RUU updater with same IPL/SPL as yours and you'll have your backup

I extracted these from a OEM Cingular ROM. What are the differences between both sets of SPL/IPL's??
When restoring my SPL/IPL, which set should i use?

Okay, this is where you got to be careful since a pair is for G3 (IPL_1) and the other is for G4 (IPL_2). You don't see it in 1.x ROMs since there were no G4 devices then
cheers

mestrini said:
Okay, this is where you got to be careful since a pair is for G3 (IPL_1) and the other is for G4 (IPL_2). You don't see it in 1.x ROMs since there were no G4 devices then
cheers
Click to expand...
Click to collapse
Wow, thanks for letting me know. I'll make sure to use the IPL_1 for my restore.

EVERY HERALD.be carefull.please do read this.

I had seen the Aserg using he USPL to flash his rom and radio.
GUYs:
DO remember,if you are not Hard-spl,your spl ipl is lower than 4.00.0000,Please don't run JUMPSPL or USPL-BETA3 by pof.
Trust me or you will find lots of bricks on street.
Click to expand...
Click to collapse
If you are HTC 4350 OR VADEFONE OR T-WING.run official ruu update to WM6 frist,to make you IPL SPL upon 4.00.0000
If you think I am joking.keep on..
Click to expand...
Click to collapse
check more here or here

And if ipl/spl: 5.04.0001/5.04.0000 from WM5??? That is possible?

ASerg said:
And if ipl/spl: 5.04.0001/5.04.0000 from WM5??? That is possible?
Click to expand...
Click to collapse
that's ok. nothing at all.
safely.

Now I shall check up

I confirm. Thanks!

ASerg said:
I confirm. Thanks!
Click to expand...
Click to collapse
please warn people in your post.
and why don't you use jspl.it's quick and safely.uspl too slow but simply use

i want to be able to flash my rom so that i could install the HTC RUU on my tmo wing ( it's actually a herald but i was stupid enough to put in the TMO RUU)
Do you know any way i could do that with instructions available?
Also, once i do it, would the phone become unlocked again or still locked Just wondering.

umchriswho said:
i want to be able to flash my rom so that i could install the HTC RUU on my tmo wing ( it's actually a herald but i was stupid enough to put in the TMO RUU)
Do you know any way i could do that with instructions available?
Also, once i do it, would the phone become unlocked again or still locked Just wondering.
Click to expand...
Click to collapse
The HARD-SPL is a little more dangerous than the USPL... I can help you find ways to get any ROM you want on that phone easily enough, but UNLOCKING it again is the hard part. There's not 100% sure fire SAFE way of doing it.

welll, i just installed the hard-spl on my device and it went through
there's just one thing that gets me...
what's the difference with this hard-spl and HTC?
is the only difference is that the boot screen is different or are there more features?
For now, I just need a comparision of what the hard-spl has from the HTC one.

The Hard-SPL is a customer SPL. It's permanent, too. You will have to create your own customized RUU from now on, one that lacks the SPL. You can't flash RUU's that contain SPL because the SPL is now write protected. It's convinient, though, because now you can't accidently screw it up. (It's safe once you have it IN your device. Too many people brick their phones trying to get it in there in the first place, though.)

So now i won't be able to put in the HTC RUU anymore?
All right, sorry i'm being so stupid, but here's another question...
You said that i now have to make my own customized RUUs?
What do you mean by that?
If you don't mind, you could send me a pm, I don't want to spam this thread with my stupidity.

Now you can flash ANY rom you want.
ALL cooked ROms - really all - without the chance of bricking = your device is SAFE.
IF you respect this little thing
every RUU Rom Update Utility
contains:
1. Enterbootloader.exe
2. Rapitool.exe
3. RomupgradeUtility.exe (the one you start)
4. RUUGetinfo.exe
5. RUU ressource.dll
6. RUU_signed.nbh (that is the custom system OS - you can put every HERALD .nbh here postet in touchIT3 for example)
7. SPL.nbh ---- !!!!!!!! delete this allways!!!!!!!!! ------ (it is in all official RUU but delete it)
now you can flash with an official update tool all custom roms for you herald.
But don´t use wing roms - the keyboadmapping is different.
There are good herald roms, too.
Good luck
umchriswho said:
So now i won't be able to put in the HTC RUU anymore?
All right, sorry i'm being so stupid, but here's another question...
You said that i now have to make my own customized RUUs?
What do you mean by that?
If you don't mind, you could send me a pm, I don't want to spam this thread with my stupidity.
Click to expand...
Click to collapse

Dear Maestro Help upgrade to WM6
Dear Canonyang,
Have the following
Dopod C800 WM5 5.1.422 (Build 15633.3.2.0)
Can you please help me upgrade to WM 6
Gratefully
neelanjoo
canonyang_China said:
please warn people in your post.
and why don't you use jspl.it's quick and safely.uspl too slow but simply use
Click to expand...
Click to collapse

IPL and SPL that don't match

I started a new thread so that people wouldn't have to read through my trials but long story short I have a G3 wizard and I'm trying to flash it. Followed all of the steps in the guide by vippie. I used the button rom to start with but mine was one of the many that stopped at 98% and gave me error 302 so I ended up using the XDA mini rom as the alternative that was suggested.
Now I've flashed my phone three times with the same rom to try and get the IPL and SPL the same but to no avail. The IPL and SPL are 1.05 and 2.25 respectively. Any help would be greatly appreciated.

hey i flashed my tmobile mda to a chinese rom too and then it changed spl to a diff version than the ipl and then i tried to flashed it with love rom and still it doesnt change the ipl and spl to the same version that i had before, then i removed the battery then my phone does not charge or turn on anymore, i have a g4 by the way, i m not sure if i bricked it or not

joco2560 said:
hey i flashed my tmobile mda to a chinese rom too and then it changed spl to a diff version than the ipl and then i tried to flashed it with love rom and still it doesnt change the ipl and spl to the same version that i had before, then i removed the battery then my phone does not charge or turn on anymore, i have a g4 by the way, i m not sure if i bricked it or not
Click to expand...
Click to collapse
I think you may have been trying to offer your empathy for my particular situation but that's what we in the business call thread jacking. Start your own thread please. Thanks for the comments though.
I was thinking today I may give flashing the button rom another try. Any suggestions people?
And a bump for some professional help and good luck as well.

SharpieMarker said:
I think you may have been trying to offer your empathy for my particular situation but that's what we in the business call thread jacking. Start your own thread please. Thanks for the comments though.
I was thinking today I may give flashing the button rom another try. Any suggestions people?
And a bump for some professional help and good luck as well.
Click to expand...
Click to collapse
wow, basically the same problem just trying to let u no that other ppl r having the same problem and i thought my problem would've helped in some ways...thx for trying to be nice at the end but ur not. sry i forgot to metion that:" hey, SharpieMarker im having the same problem that ur having..."in my previous post

joco2560 said:
wow, basically the same problem just trying to let u no that other ppl r having the same problem and i thought my problem would've helped in some ways...thx for trying to be nice at the end but ur not. sry i forgot to metion that:" hey, SharpieMarker im having the same problem that ur having..."in my previous post
Click to expand...
Click to collapse
Well I apologize if I came of as a douche, I guess I didn't understand what you were saying exactly. I appreciate any support I can get with the issues I'm having so its good to know I'm not the only one. Thanks joco.

SharpieMarker said:
Now I've flashed my phone three times with the same rom to try and get the IPL and SPL the same but to no avail. The IPL and SPL are 1.05 and 2.25 respectively. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Surely you're not serious? oh Jesus, you are.
OK... SPL is separate from IPL, not only is it impossible to get them to be "the same version" it would also achieve nothing to actually do so either... so please, the procedure is very simple, you flash a patched SPL, you flash your crap on. Job Done... I thought there was already a patched SPL for G3... do I need to make one of those as well?!?

Olipro said:
Surely you're not serious? oh Jesus, you are.
OK... SPL is separate from IPL, not only is it impossible to get them to be "the same version" it would also achieve nothing to actually do so either... so please, the procedure is very simple, you flash a patched SPL, you flash your crap on. Job Done... I thought there was already a patched SPL for G3... do I need to make one of those as well?!?
Click to expand...
Click to collapse
Well that seems logical however I was misinformed. SO I've flashed this Xda_mini rom, then what is the cause of the issues I was having getting a connection error when trying to CID unlock? Wizards have to be CID unlocked before flashing 2.X roms right?

What started as a simple, objective thread, has become quite confusing in a matter of a few posts.
joco2560 said:
wow, basically the same problem just trying to let u no that other ppl r having the same problem and i thought my problem would've helped in some ways...thx for trying to be nice at the end but ur not. sry i forgot to metion that:" hey, SharpieMarker im having the same problem that ur having..."in my previous post
Click to expand...
Click to collapse
Well, in fact your problem ISN'T the same as SharpieMarker's because his phone is still alive...
I believe you tried to downgrade a G4 to 1.xx bootloader which only exist for G3. Once the battery came out your phone could never boot again. Say bye bye to it...
SharpieMarker said:
Well that seems logical however I was misinformed. SO I've flashed this Xda_mini rom, then what is the cause of the issues I was having getting a connection error when trying to CID unlock? Wizards have to be CID unlocked before flashing 2.X roms right?
Click to expand...
Click to collapse
A LOT of people are reporting failed downgrades which 'block' the SPL at 2.xx. Once there even after 30 flashes the SPL never lowers to 1.xx to allow CID unlocking.
No solution is known until now...
Olipro said:
Surely you're not serious? oh Jesus, you are.
OK... SPL is separate from IPL, not only is it impossible to get them to be "the same version" it would also achieve nothing to actually do so either... so please, the procedure is very simple, you flash a patched SPL, you flash your crap on. Job Done... I thought there was already a patched SPL for G3... do I need to make one of those as well?!?
Click to expand...
Click to collapse
There isn't and i believe you should patch one...
cheers

mestrini said:
A LOT of people are reporting failed downgrades which 'block' the SPL at 2.xx. Once there even after 30 flashes the SPL never lowers to 1.xx to allow CID unlocking.
No solution is known until now...
Click to expand...
Click to collapse
So what is the solution or is it the patched SPL that Olipro is referring to?

The HardSPL (Olipro) is ONLY for use with G4. The flash program should keep you from flashing it to a G3 Wizard because their SPL code are not compatible.
SoftSPL also doesn't work for G3 wizard.
joco2560 should be produced a brick because as I know, no unofficial Chinese ROMs are equipped with G4 IPL and SPL.

Man if only these guys would have read the WIKI... There is a link in my signature to an outstanding tutorial for newbies. Just read it and you will feel enlightened. Everything will seem so simple and life's purpose will become evident... Just Kidding but seriously guys... Read the damn WIKI... I'm tired of reading about bricks.
NOTE:: THIS ENTIRE POST IS ONE GIANT LINK TO THE WIKI I'M TALKING ABOUT!!!
READ IT!!!

starkwong said:
The HardSPL (Olipro) is ONLY for use with G4. The flash program should keep you from flashing it to a G3 Wizard because their SPL code are not compatible.
SoftSPL also doesn't work for G3 wizard.
joco2560 should be produced a brick because as I know, no unofficial Chinese ROMs are equipped with G4 IPL and SPL.
Click to expand...
Click to collapse
Alright, this is helpful and I was hoping there might be a few suggestions as to what to do at this point. Thanks guys for the comments.

dharvey4651 said:
Man if only these guys would have read the WIKI... There is a link in my signature to an outstanding tutorial for newbies. Just read it and you will feel enlightened. Everything will seem so simple and life's purpose will become evident... Just Kidding but seriously guys... Read the damn WIKI... I'm tired of reading about bricks.
NOTE:: THIS ENTIRE POST IS ONE GIANT LINK TO THE WIKI I'M TALKING ABOUT!!!
READ IT!!!
Click to expand...
Click to collapse
Okay, firstly I have not bricked my device. I have read all of the guides and walkthroughs before attempting anything on my wizard. Unfortunately your guide that you have written, just like the other ones, has not answered my question or told me what I should do (unless I have missed it somewhere which is possible).

Okay, after some finagling with the lokiwiz application I managed to unlock and then cid unlock my phone however the IPL is still 1.05 and the SPL is 2.25. Is that accurate or should the SPL be lower now? Do I need to reflash?
Alright, after re-re-re-re-re-reading the instructions I think I understand the bit about IPL and SPL. I think. Feel free to clarify though.

If lokiwiz does not show any errors during unlocking (NOTE That lokiwiz always shows successful regardless it is actually unlocked or not, so the error message is the most important), then either try to flash Button's ROM again and you will get 1.05 IPL and SPL (That's my way), and others suggests to upgrade IPL and SPL directly to 3.08.

starkwong said:
If lokiwiz does not show any errors during unlocking (NOTE That lokiwiz always shows successful regardless it is actually unlocked or not, so the error message is the most important), then either try to flash Button's ROM again and you will get 1.05 IPL and SPL (That's my way), and others suggests to upgrade IPL and SPL directly to 3.08.
Click to expand...
Click to collapse
There was no error message when I CID unlocked. It successfully unlocked both times (the first using the U command and after a restart using the C command). My phone restarted twice during the unlocking so I think it went just fine. So should I proceed with the flashing of the tmobile rom? After the unlocking I have an IPL of 1.05 and an SPL of 2.25.

You can always go back to Button's ROM, so it's OK to flash T-Mobile ROM.
However I still recommend to flash Button's ROM once more first.

starkwong said:
You can always go back to Button's ROM, so it's OK to flash T-Mobile ROM.
However I still recommend to flash Button's ROM once more first.
Click to expand...
Click to collapse
Well I decided to flash the t-mobile rom and it went smooth. Everything works fine. So now I have an IPL and SPL of 2.26 so I can flash some of the more interesting roms right? Thanks for all the help and advice guys. Much appreciated.

SharpieMarker said:
Well I decided to flash the t-mobile rom and it went smooth. Everything works fine. So now I have an IPL and SPL of 2.26 so I can flash some of the more interesting roms right? Thanks for all the help and advice guys. Much appreciated.
Click to expand...
Click to collapse
Yes you should now be CID unlocked and can flash any Rom you want as long as it does not contain an IPL/SPL.
And by the way, It does tell you in that WIKI exactly what you need to do to CID unlock your device. (The SPL will not downgrade to 1.05 unless you flash the button Rom again AFTER completing The Unlocking Process through lokiwiz. I wouldn't even reccomend flashing the button Rom again. It's pointless because Flashing the T-Mobile Rom is going to upgrade you IPL/SPL to a higher, matching pair and is going to give you a very strong, stable base rom to flash to a custom Rom From.

SharpieMarker said:
Well I decided to flash the t-mobile rom and it went smooth. Everything works fine. So now I have an IPL and SPL of 2.26 so I can flash some of the more interesting roms right? Thanks for all the help and advice guys. Much appreciated.
Click to expand...
Click to collapse
I think you should check your CID status with WST before trying to flash a custom ROM. Lokiwiz doesn't check for errors and proceeds as if everything went ok even if it didn't.
For all we know your phone might be originally from T-Mobile and even CID locked would always accept an official ROM.

[Q]SoftSPL

I've been reading the wiki, but either it was not clear enough or i am dumb enough (^^)
can anyone pls clarify me? does SoftSPL need to be loaded on every system startup or just only on rom upgrade?
it seemed to me a better choice to use SoftSPL instead of HardSPL to not void warranty.
since OliNex (uber pro ty dudes) are developing a HardSPL is it possible to port/transform/whatever to SoftSPL?
best regards
tehCORE

tehCORE said:
I've been reading the wiki, but either it was not clear enough or i am dumb enough (^^)
can anyone pls clarify me? does SoftSPL need to be loaded on every system startup or just only on rom upgrade?
it seemed to me a better choice to use SoftSPL instead of HardSPL to not void warranty.
since OliNex (uber pro ty dudes) are developing a HardSPL is it possible to port/transform/whatever to SoftSPL?
best regards
tehCORE
Click to expand...
Click to collapse
softspl aka sspl is only used for flashing spl's. You can't flash a rom using a sspl. Why do you think the Hardspl is created???????

thought
sspl -> temp fix
hspl -> perm fix

With the softspl you flash the hard spl and then you flash a rom with it

tehCORE said:
it seemed to me a better choice to use SoftSPL instead of HardSPL to not void warranty.
Click to expand...
Click to collapse
no. imagine the following case... your device has no matching shipped rom for it... you flash a rom via sspl... flash gets interrupted... YOU're STUCK!!!
and warranty isn't voided with hardspl, just reflash to stock SPL before sending it in...

cmonex said:
no. imagine the following case... your device has no matching shipped rom for it... you flash a rom via sspl... flash gets interrupted... YOU're STUCK!!!
and warranty isn't voided with hardspl, just reflash to stock SPL before sending it in...
Click to expand...
Click to collapse
oh did not know that, thanks for the enlightenment

URGENT: flashing back to stock for warrenty - all gone wrong

hi
i've need some help urgently on this as the phone is being picked up in the morning and its currently going really bad
i had dutties 3.9 rom on, but i found a 1.19 orange rom in the wiki, so installed this.
however the display is very bad, and is only showing 16 colours so looks rubbish
I belive this is to do with the SPL
This is what i did:
1. put phone in bootloader mode (was displaying SPL 1.56)
2. ran blac_uspl.exe in USB mode which changed the SPL to 1.15 (USPL)
3. installed the rom
did i do something wrong?
any help VERY appreciated
Thanks

Did you tried to flash back your original SPL??
USPL is just a temporary patch of the SPL...
I think you have to flash back to SPL 1.15...
To check if you have the right version put phone in bootloader mode it should displaying SPL 1.15...

Read here http://forum.xda-developers.com/showthread.php?t=431217
D'rath

Ikkari said:
Did you tried to flash back your original SPL??
USPL is just a temporary patch of the SPL...
I think you have to flash back to SPL 1.15...
To check if you have the right version put phone in bootloader mode it should displaying SPL 1.15...
Click to expand...
Click to collapse
thats the problem
i dont know how?

D'rath said:
Read here http://forum.xda-developers.com/showthread.php?t=431217
D'rath
Click to expand...
Click to collapse
Thanks but thats for Hard SPL, where as i used USPL
or am i getting it all wrong?

D'rath said:
Read here http://forum.xda-developers.com/showthread.php?t=431217
D'rath
Click to expand...
Click to collapse
Just look in the first post under:
How to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!

very strange
its working now
just needed a hard reset!
thanks for your help
edit------------
scratch that, its displaying them stupid colours again
GREAT!

m.r.davies said:
Thanks but thats for Hard SPL, where as i used USPL
or am i getting it all wrong?
Click to expand...
Click to collapse
You are getting it wrong!
USPL is a temporary patch to allow you to flash a unauthorized ROM!
You have currently SPL 1.56 installed, but you need flash back stock SPL 1.15

Ikkari said:
You are getting it wrong!
USPL is a temporary patch to allow you to flash a unauthorized ROM!
You have currently SPL 1.56 installed, but you need flash back stock SPL 1.15
Click to expand...
Click to collapse
thanks
i understand the problem now
but the link that was posted talks about hard spl, and when it says about reverting the rom, it talks about using hard spl, which is where i'm getting confused
Could you clarify which steps i need to take as its still showing spl 1.54
thanks

m.r.davies said:
thanks
i understand the problem now
but the link that was posted talks about hard spl, and when it says about reverting the rom, it talks about using hard spl, which is where i'm getting confused
Could you clarify which steps i need to take as its still showing spl 1.54
thanks
Click to expand...
Click to collapse
go to http://forum.xda-developers.com/showthread.php?t=431217
view the very last part of first post. It teaches you EVERYTHING. I think the part that you confused is going from step3 to step4. Read carefully. =)
good luck.

m.r.davies said:
hi
i've need some help urgently on this as the phone is being picked up in the morning and its currently going really bad
i had dutties 3.9 rom on, but i found a 1.19 orange rom in the wiki, so installed this.
however the display is very bad, and is only showing 16 colours so looks rubbish
I belive this is to do with the SPL
This is what i did:
1. put phone in bootloader mode (was displaying SPL 1.56)
2. ran blac_uspl.exe in USB mode which changed the SPL to 1.15 (USPL)
3. installed the rom
did i do something wrong?
any help VERY appreciated
Thanks
Click to expand...
Click to collapse
1. dnload the stock spl from the said thread.
2. dnload the hspl 1.56 olinex wrapper
3. connect ur fone to pc in the bootloader mode.
4. run the hspl 1.56 olinex wrapper and do nothing to the onscreen utility.
5. wait fr the files to be xtracted in the window from where u ran the hspl wrapper.
6. replace the self extracted ruu_signed.nbh with the stock spl 1.15 that u downloaded.
7. continue with the ruu utility.
thats all thts needed..

ultimatepichu said:
go to http://forum.xda-developers.com/showthread.php?t=431217
view the very last part of first post. It teaches you EVERYTHING. I think the part that you confused is going from step3 to step4. Read carefully. =)
good luck.
Click to expand...
Click to collapse
Thanks
yes you're right, it solved my problem
the reason i didn't try in the first place was becuase the title said HARD SPL and i didn't want to mess it up as i used USPL
i used Restore_Stock_SPL_115.zip and swapped the nbh file after initilizing installation (after extraction) and it worked great
thanks for all your help guys!!!!!!
i really appreiciate it

My god, I was feeling your anguish while reading this topic until the end...

Black Antitoon said:
My god, I was feeling your anguish while reading this topic until the end...
Click to expand...
Click to collapse
I eventually went to bed at 2:30am
all sorted now and got my new phone!
woohoo