Sorry for this but while I was looking for something else I come across a post that mentioned a reg key to change the right Shift key to Ctrl key. At the time I was not paying much attention to it but now when I wanted to know more about it I can't seem to find that post. I dont even know if it was posted here or in some other forum.
I know there is one called Ctrl Key Pro but that one uses the Alt key and not the right shift key for the Ctrl task.
Can anyone help?
Its Ctrk Key Pro. Just load it up and press Alt + 0 (zero) to get to the options. From there you can set your CTRL key and ALT key that you want to use instead of the defaults. I took a look and it doesnt seem to indicate left or right shift...only SHIFT. There may be a hex code for the left vs right...possible thats what you were looking for?
sharpmat007 said:
Its Ctrk Key Pro. Just load it up and press Alt + 0 (zero) to get to the options. From there you can set your CTRL key and ALT key that you want to use instead of the defaults. I took a look and it doesnt seem to indicate left or right shift...only SHIFT. There may be a hex code for the left vs right...possible thats what you were looking for?
Click to expand...
Click to collapse
I will have to give it a try and see.
Thanks for helping!
What is Ctrl Key Pro? Where is Ctrl Key Pro??? How to load it? Do I have to download it? Where? Do I ask too much Qs? ^^ thanx
Djoe said:
What is Ctrl Key Pro? Where is Ctrl Key Pro??? How to load it? Do I have to download it? Where? Do I ask too much Qs? ^^ thanx
Click to expand...
Click to collapse
Many questions.. ..one ANSWER.
Oh God... that mccune again... why i must look soo stupid in front of his seniority
-.- thanx AGAIN dude... u are my treo savior.
Djoe said:
Oh God... that mccune again... why i must look soo stupid in front of his seniority
-.- thanx AGAIN dude... u are my treo savior.
Click to expand...
Click to collapse
LOL -> You are welcome, we are here to learn from each other so don't be afraid just pass on the knowledge you gather! )
Related
Hi,
here HKLW\Software\Microsoft\Shell\Keys\... I could find my hardware buttons and I was able to remap them. But I'm missing the left OK button which is located on the left side of the kaiser.
Does some know how I can change this button ?
Cheers Wolle
I don't know if it's possible to change this via the registry, but with the tool AE Button Plus it is possible:
http://ae.inc.ru/aebplus.php
I've already changed the left OK button to an ESC button with this tool.
peterbonge said:
I don't know if it's possible to change this via the registry, but with the tool AE Button Plus it is possible:
http://ae.inc.ru/aebplus.php
I've already changed the left OK button to an ESC button with this tool.
Click to expand...
Click to collapse
I've heard about that tool, but isn't it running all the time in the background to handle all ? I do not want to loose ressources, so I prefer changing the registry.
Cheers Wolle
wolle said:
I've heard about that tool, but isn't it running all the time in the background to handle all ? I do not want to loose ressources, so I prefer changing the registry.
Cheers Wolle
Click to expand...
Click to collapse
I like built in solutions as well, but I have to say that the Kaiser has plenty of memory. I don't think it will phase it.
That said, I don't run that application so chalk this post up as useless...
Later, Lew
For the record, SPB Pocket Plus can also handle changing this or any button to anything that you want. I have kept the OK button as an OK button, but I can now press and hold the OK button to Close the app.
wolle said:
I've heard about that tool, but isn't it running all the time in the background to handle all ? I do not want to loose ressources, so I prefer changing the registry.
Cheers Wolle
Click to expand...
Click to collapse
I want to know
Can anyone tell me how to use the shift keyboard to press keys that aren't there?
For example, how do I hit DEL to enter the bios when there is no DEL key. Or how do I press / on the shift keyboard?
This is annoying.
Caid
444
you have to use the "Fn" button, which enable the blue part of the keys, like for example the "ins" button or the "F1-10" buttons.
I know how to use the function (fn) key, but there's no del or / in blue on any of the keys.
Caid.
What language keyboard does your shift have?
On my Shift, the del key is the 2nd one to the right of the space bar, and the / key is next to the arrow keys.
hehe
Yeah, too bad I didn't get to read your post about 3 days ago when I got the shift. I figured it out about 3 hours ago, that the keys are there, but have different symbols on them. Pretty annoying, really. And Canc means Del in Italian, that I'm pretty sure now
Thanks again for helping me out with that information
Caid.
444
Can someone please explain me how to press F11?
With a little luck
vapetrov said:
Can someone please explain me how to press F11?
Click to expand...
Click to collapse
With a little luck, F11 is F1 + Fnc (my shift is in for repairs)
I remember having to press F11 for something, but I couln't do it...
lucid said:
With a little luck, F11 is F1 + Fnc (my shift is in for repairs)
I remember having to press F11 for something, but I couln't do it...
Click to expand...
Click to collapse
As far as I know, Shift has no F11 nor F12.
And what is "Fnc" anyway?
Hello,
can someone tell me how to change te two software keys on the homescreen of TF3D?
On the left i have Phone(Telefoon) and on the right Camera.
Camera is okay but Phone?!?!? why?
When i press the 'green' 'call' button i get the same screen.
Thanxs in advance,
Sincerely Tom.
Tom Lenferink said:
Hello,
can someone tell me how to change te two software keys on the homescreen of TF3D?
On the left i have Phone(Telefoon) and on the right Camera.
Camera is okay but Phone?!?!? why?
When i press the 'green' 'call' button i get the same screen.
Thanxs in advance,
Sincerely Tom.
Click to expand...
Click to collapse
Use Advanced Config for this..
Or just change the following reg. keys:
In this case the left key is: Icontact; the right Key is Commanager
("HKLM","\Software\HTC\Manila" ,"HomeLSKPath","\Storage Card\Program Files\iContact\iContact.exe")
("HKLM","\Software\HTC\Manila","HomeLSKText","iContact")
("HKLM","\Software\HTC\Manila" ,"HomeRSKPath","\windows\CommManager.exe")
("HKLM","\Software\HTC\Manila","HomeRSKText","CommManager")
cyron_at said:
Use Advanced Config for this..
Or just change the following reg. keys:
In this case the left key is: Icontact; the right Key is Commanager
("HKLM","\Software\HTC\Manila" ,"HomeLSKPath","\Storage Card\Program Files\iContact\iContact.exe")
("HKLM","\Software\HTC\Manila","HomeLSKText","iContact")
("HKLM","\Software\HTC\Manila" ,"HomeRSKPath","\windows\CommManager.exe")
("HKLM","\Software\HTC\Manila","HomeRSKText","CommManager")
Click to expand...
Click to collapse
Thanxs for your Speedy(quick) reply!!! (Speedy is because I work for Trotec/Trodat, maybe you know them).
It works!, of course, I hear you say
When, as in my case, the phone is factory default then the HomeLSK.. and Home RSK... are stil empty.
I put iGo8 in it and I am verry happy!
Of course, don't forget a soft-reset.
Thanxs again!
PS. The Austrian are always quick when you need help.
For 2 years ago I slipt of the road and before I could get out of my car there allready stopt 2 other cars to help me!
Einfach supergeil! It's my favorite holiday destination!
..you are welcome!
br
Chris
Is there a similar key to change the Softkeys in other Tabs?
When I read an email there is the Softkey "Reply all" which I would like to change to just "Reply". I also would
Is this possible?
Regedit:
HKCU>Software>Microsoft>Inbox>Settings
Change ShowReplyAllEmailSK1 from 1 to 0.
reboot phone
What's the reg keys for wm6.5, in order to replace Left Softkey from Telephon to Camera?
thanks in advance
krylovpro said:
What's the reg keys for wm6.5, in order to replace Left Softkey from Telephon to Camera?
thanks in advance
Click to expand...
Click to collapse
See post 2, just use path Windows\Camera.exe instead.
Bruce Inman said:
See post 2, just use path Windows\Camera.exe instead.
Click to expand...
Click to collapse
thanks, but you mean it should be:
"HKLM","\Software\HTC\Manila" ,"HomeLSKPath","Windows\Camera.exe"
And what about the line?
"HKLM","\Software\HTC\Manila","HomeLSKText","iCon tact"
krylovpro said:
thanks, but you mean it should be:
"HKLM","\Software\HTC\Manila" ,"HomeLSKPath","Windows\Camera.exe"
And what about the line?
"HKLM","\Software\HTC\Manila","HomeLSKText","iCon tact"
Click to expand...
Click to collapse
I meant that was the path to put in the registry. the rest IS the registry, there was no need for me to restate that.
For text you can put whatever you want to display. Like camera, cam, whatever.
Got a question.
Got a Touch Pro last weekend, but the "del" key isn't working.
I pressume its broken, cuz the keyboard backlight doesn't go on when i press it.
Is there an app out there, that gives me a onscreen del key whenever i type anything?
Or a howto to make one myself?
Why dont you use the "Raphael Keyboard Remaper" to bind backspace to the right shift key, an onscreen backspace isnt so easy i think.
DaDevil said:
Why dont you use the "Raphael Keyboard Remaper" to bind backspace to the right shift key, an onscreen backspace isnt so easy i think.
Click to expand...
Click to collapse
Very VERY nice first post, dunno why i didn't think of that!
Topic can be closed, it's "fixed" now like DaDevil said.
Hi, I knew there were some keyboard remap out there but I want to do these:
1. remap the X panel key to Start key
2. remap the Sym key to Ctrl key
Please let me know if it is possible and how. Thanks!
By the way, I will prefer to know how to modify the register value and do it by myself because the cab/exe I used before crashed my system.
aeroxy said:
Hi, I knew there were some keyboard remap out there but I want to do these:
1. remap the X panel key to Start key
2. remap the Sym key to Ctrl key
Please let me know if it is possible and how. Thanks!
Click to expand...
Click to collapse
for Q number 1:
Yeah there's is.
But it's according to your ROM actually if what Version of panel Manager is installed. According to my ROM,
HKLM ->Software -> SonyEricsson ->Panel manager -> edit the string of: ApplicationName
For Q number 2:
no idea, I figure the question is asked before. You should try google.
Hope it's helpful
mymailx said:
for Q number 1:
Yeah there's is.
But it's according to your ROM actually if what Version of panel Manager is installed. According to my ROM,
HKLM ->Software -> SonyEricsson ->Panel manager -> edit the string of: ApplicationName
For Q number 2:
no idea, I figure the question is asked before. You should try google.
Hope it's helpful
Click to expand...
Click to collapse
Thank you. What is the "Start Menu's" application name?
aeroxy said:
Thank you. What is the "Start Menu's" application name?
Click to expand...
Click to collapse
I'm sorry I don't know if you want to do so.
I'm not sure what, but it should be there a short code (special code for WM) but I kinda forget. I've searched google but it's not even fire up.
mymailx said:
I'm sorry I don't know if you want to do so.
I'm not sure what, but it should be there a short code (special code for WM) but I kinda forget. I've searched google but it's not even fire up.
Click to expand...
Click to collapse
I searched too. Google works like a ***** sometimes.
Looks like they use "Quickmenu" application to assign the panel button.
No I forgot that I'm using WisBar. In Wisbar there's an option to assign the startup button to an app.