Proporta have blown it! - Advantage X7500, MDA Ameo Accessories

http://www.proporta.com/F02/PPF02P05.php?t_id=3448&t_mode=des
Boo! Of all the designs for their case, they go and copy the one that comes with the phone! How stupid can you get?! I had really hoped they would come up with something cool (like the Piel Frama that's coming!)
Oh well, I used to really rate Proporta but they have definitely missed a trick here!

findus said:
http://www.proporta.com/F02/PPF02P05.php?t_id=3448&t_mode=des
Boo! Of all the designs for their case, they go and copy the one that comes with the phone! How stupid can you get?! I had really hoped they would come up with something cool (like the Piel Frama that's coming!)
Oh well, I used to really rate Proporta but they have definitely missed a trick here!
Click to expand...
Click to collapse
it could be just me, but i actually dislike the Piel Frama and PDAir one, yes i agree it covers the device better, but i don't like it cover the rear of the screen, so the buttons are surrounded by the leather which makes it really ugly in my personal view. So if you ask me what do i think about the original case, well, i actually likes it a lot, more then the Piel Frama case, i even prefer the Proporta case more then Piel Frama one.
I know I am not the only one thinking this, and looks like Proporta thinks like me too here, I guess it's really down to personal view, some people will want more protection, but some others just want the device to look good.

Each to their own I guess! Point taken about buttons having leather around them, but I think this is a necessary evil to stop the black bit on the keyboard connector scratching the screen. My personal favourite so far is the Piel Frama. Hope it comes out soon!

wu5262 said:
it could be just me, but i actually dislike the Piel Frama and PDAir one, yes i agree it covers the device better, but i don't like it cover the rear of the screen, so the buttons are surrounded by the leather which makes it really ugly in my personal view. So if you ask me what do i think about the original case, well, i actually likes it a lot, more then the Piel Frama case, i even prefer the Proporta case more then Piel Frama one.
I know I am not the only one thinking this, and looks like Proporta thinks like me too here, I guess it's really down to personal view, some people will want more protection, but some others just want the device to look good.
Click to expand...
Click to collapse
@WU the original case is good; but i have changed the case as the keyboard scratches the side metal bit of the screen near the vuflo logo.

faisal.husain said:
@WU the original case is good; but i have changed the case as the keyboard scratches the side metal bit of the screen near the vuflo logo.
Click to expand...
Click to collapse
actually, it's the black bit on the keyboard connector scratching the side metal, so I have take some layer off that black bit, and now it doesn't do any more scratching.

Related

Best / Thinnest Cases for the HD2?

I know there are several threads about cases for the HD2 here, but a few are about leather cases (which I do not want to use)...there some about the silicone/ gel cases which I would like to use, and theres the invisible skin type which I would like to know more about. I do not know if the Invisible Skin/Armor ..w/e you want to call it -they seem the same to me... are tough enough to truly protect the phone from a fall ?
I also would like to know if there are any silicone/gel cases which are thinner than usual but still provide adequate protection...
One good example I can think of is this one case I saw on an iphone -it was a clear hard case, but it was very thin which made me really like it...
here is the link:
http://www.bestbuy.com/site/Incase+...lear/9539181.p?id=1218121171974&skuId=9539181
Click to expand...
Click to collapse
It is an incase brand case...
Any suggestions/ advice about any of this ? Thank you very much, in advance.
bump, please
I'm waiting for this...
HTML:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=320503514458&ssPageName=STRK:MEWNX:IT
I got this one..
http://www.case-mate.com/HTC-HD2-Cases/Case-Mate-HTC-HD2-Barely-There-Cases.asp
Very thin.
BadMonkey said:
I got this one..
http://www.case-mate.com/HTC-HD2-Cases/Case-Mate-HTC-HD2-Barely-There-Cases.asp
Very thin.
Click to expand...
Click to collapse
here is a short review by me
http://forum.xda-developers.com/showthread.php?t=642714
Bonobow said:
I'm waiting for this...
HTML:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=320503514458&ssPageName=STRK:MEWNX:IT
Click to expand...
Click to collapse
Think my one's better and cheaper...
Bonobow said:
Think my one's better and cheaper...
Click to expand...
Click to collapse
sry but I dont agree... you pay a lot of bucks for a phone to put it in a junk case?
its like driving a big car and paint it with sh*t
Alot of bucks!? it's ONLY £1.49!
Bonobow said:
Alot of bucks!? it's ONLY £1.49!
Click to expand...
Click to collapse
you're not reading properly. he's saying why go cheapo on an expensive phone?
Just got the Silver Case Mate Barely There today. Brilliant stuff - super snug, mirror finish, super thin. As thin and light as More-Thing's cases in fact, which I used to use when still on a Touch HD. Finger magnet but love it anyways
aussiebum said:
you're not reading properly. he's saying why go cheapo on an expensive phone?
Just got the Silver Case Mate Barely There today. Brilliant stuff - super snug, mirror finish, super thin. As thin and light as More-Thing's cases in fact, which I used to use when still on a Touch HD. Finger magnet but love it anyways
Click to expand...
Click to collapse
Better go cheapo-if i'd get a nice looking case, i wouldn't want THAT to get scrathed up either!
I ordered the capdase protector, seems to be really nice. the invisible shield and stuff like that offer no drop protection i hope mine will offer some.
Hmm... the barely there case not available yet for Tmo US HD2
I bought my "barely there" case direct from HK. Problem is, if you have multiple batteries like I do, you tend to scratch your phone when removing/replacing the case to get to the battery cover.
This led me to use the clear/invisible armor/shield, but I've had to remove the section that covers the antenna because it seems to cause rapid battery drain - see my post at thread 652013.
I received
HTML:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=320503514458&ssPageName=STRK:MEWNX:IT
and i find it's great.
is it much different than the one shipped with the hd2?
Tried quite a few cases but my fav so far is this one:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=390149733765&ssPageName=STRK:MEWNX:IT
Also known as flexishield case. It's like a soft plastic / gel case so glides in and out of your pockets easily and doesn't stick/attract lint like some silicone cases. It offers good protection but only adds about 1mm thickness to your phone.
I recommend black/gray but the choice is yours.
I actually ordered one like that...
but I find it hard to believe that it only adds 1mm thickness, 1mm is like a screen protector thickness almost....idk maybe I am wrong?
Okay maybe two then
But certainly doesn't add much at all. A screen protector is micron thin. I don't think it adds 1mm...
There are also variations in the gel type cases. Some are actually thicker. My friend bought a similar one but was quite a bit thicker. It had like a checked pattern on the back.
erebusting said:
I know there are several threads about cases for the HD2 here, but a few are about leather cases (which I do not want to use)...there some about the silicone/ gel cases which I would like to use, and theres the invisible skin type which I would like to know more about. I do not know if the Invisible Skin/Armor ..w/e you want to call it -they seem the same to me... are tough enough to truly protect the phone from a fall ?
I also would like to know if there are any silicone/gel cases which are thinner than usual but still provide adequate protection...
One good example I can think of is this one case I saw on an iphone -it was a clear hard case, but it was very thin which made me really like it...
here is the link:
It is an incase brand case...
Any suggestions/ advice about any of this ? Thank you very much, in advance.
Click to expand...
Click to collapse
You guys may want to check the HTC HD2 Armor Case by BoxWave - The Metal Case sells @ Amazon.com for $27.95 (US DLS) I just bought 2 one for my wife & me. My thing is; you have a pretty nice and expensive phone, you better protect it good!!!
Armor Case by BoxWave it sells on amazon.com for $27.95 US dls. Really nice!!!! I just bought 2!!

[Q] Hard cover?

I'm looking for an hard cover with NO rubber o any other grippy parts... i've possibly found one, but i'd rather have a bit of choice and/or feedback.
Pretty much this is my point: my pockets are big enough for the tab and a cover, i also need a cover. And i do have one... that is made of one of those rubber materials. Works awesome but it makes putting the tab in the pocket (and exctracting it) a long and slow process, one that actually worked with my iPhone because it was such a small device, but not on the tab for obvious reasons
So. Let me point out a few things that this cover shouldn't have:
- grippy material
- transparent material (looks good for a few days, then gets yellow-ish and you see the dirt lodged between the cover and the gadget)
- flashy colors, the tab is already very much an eye grabber without extra help
- bulky. If it's foldable if falls into the bulky category almost surely, remember it has to fit in my pocket
- pouch. That's exactly the kind of thing i forget once the tab is outside it.
Also, leather. I'm very skeptical about leather..... but i'm considering it.
Oh, and you know.... no matter what, it'd need to be shipped to Italy. Amazon.uk would be preferred (looked there, but no description is clear enough about the kind of cover).
Anyway, this is my find: http://cgi.ebay.it/CUSTODIA-COVER-M...t=Accessori_per_Cellulari&hash=item2c5b379a1a
looks fairly nice and meets all my requests, however it's not shown with the tab in it, so i can't tell if it's bulky or what.
Thanks in advance, worst case scenario i pointed out a cover that might interest somebody
Well, if you get a hard plastic one its going to crack if you drop your device.
I have a black one of these and its been perfect so far, it clear, but its black, so its not going to fade, ive had it for 6mths now. Its not grippy per say, but it dose have some friction, you dont want a slippy device do you? It only adds around 3mm to the tab
http://www.ebay.com.au/itm/SOFT-TPU...AU_MobilePhoneAccessories&hash=item1e62d7b957
Uhm. Slippy dosen't really bother me, i hold with two hands every gadget, even an Xperia X10 mini pro, and my grip is pretty good but you do have a point.
Turns out i've never seen/touched anything made with TPU, and i've had experience only with rubber (eww, avoid at all costs) and silicone. This is what i have at the moment...
By any chance do you know if TPU offers more or less grip than silicone? Solner or later i'll have to find out if i like the material, i guess.
Also, i think i've seen the case you linked on amazon.co.uk and that is a good thing.
Bam!
http://www.myincipio.com/Samsung-Ga...xy-Tab-feather-Ultralight-Hard-Shell-Case.asp
I've got one on my Tab and it rocks. Also comes with a the best screen protector I have ever used in my life.
GldRush98 said:
Bam!
http://www.myincipio.com/Samsung-Ga...xy-Tab-feather-Ultralight-Hard-Shell-Case.asp
I've got one on my Tab and it rocks. Also comes with a the best screen protector I have ever used in my life.
Click to expand...
Click to collapse
Wow! Very good candidate, but also really expensive... 35$ + 15 + possible customs fees scares me. But great find, even looks good. This one requires some thinking due to the price, but seems worth considering.
I like where this thread is going
Sent from my GT-P1000 using Tapatalk
No offense to anyone, but the hard shells look cool, but dont offer any protection besides scratch resistance, i recommend the TPU case, as they are cheap, work well, and if you don't like it, well it was only $5
natious said:
No offense to anyone, but the hard shells look cool, but dont offer any protection besides scratch resistance, i recommend the TPU case, as they are cheap, work well, and if you don't like it, well it was only $5
Click to expand...
Click to collapse
Still it's better than nothing, and that's what's going to have the tab if i can't comfortably fit it in my pocket
However i put some thought into this thing, and i might just end up purchasing the one i found and a cheap TPU one, to see how it is.
And still open to suggestions anyway
You might try looking at the Speck Candyshell case. I can't say I own it but all of the reviews I've seen are pretty favorable. It has a soft rubber lining to protect the Tab which sounds nice. It also comes in black, white, or purple in case you care about color.
Here's the Amazon Link: http://www.amazon.com/Speck-Product...2?ie=UTF8&s=electronics&qid=1307155322&sr=8-2
Nice!!!
Sent from my GT-P1000 using XDA App
what do you think about this one :
http://forum.xda-developers.com/showpost.php?p=14867317&postcount=94
R317DY said:
what do you think about this one :
http://forum.xda-developers.com/showpost.php?p=14867317&postcount=94
Click to expand...
Click to collapse
Interesting, but size matters. That sort of thing would completely ruin the portability of the thing
Sent from my Transformer TF101 using Tapatalk
jesand83 said:
You might try looking at the Speck Candyshell case. I can't say I own it but all of the reviews I've seen are pretty favorable. It has a soft rubber lining to protect the Tab which sounds nice. It also comes in black, white, or purple in case you care about color.
Here's the Amazon Link: http://www.amazon.com/Speck-Product...2?ie=UTF8&s=electronics&qid=1307155322&sr=8-2
Click to expand...
Click to collapse
I own one of these and the lip that protrudes around the screen does grip in pockets.
This is not the droid case you are looking for. *waves hand around like obi-wan*
Sent from my SCH-I800 using XDA App

Nillkin/Incipio Feather/Case-Mate Barely There Cases

These cases look amazing and I'm interested in to getting the Nillkin one which is made for the i9023 Nexus S, but is it really just for looks? I don't want to get this case if it doesn't protect my phone from a simple drop while walking on the street. I've watched and heard many good reviews about how the case looks and feels, but how good is it protection wise? Thanks.
It's common sense that a case is there to protect the phone. Even though in this case (pun intended) you cannot expect it to offer the protection of some other bulky alternatives, it's still better than nothing. As long as the sides protected by the nillkin hit the ground first I believe you should be ok.
I ordered it about a week ago, should be here in one or two weeks and I'll be able to provide a more hands-on opinion.
Flukzr said:
It's common sense that a case is there to protect the phone. Even though in this case (pun intended) you cannot expect it to offer the protection of some other bulky alternatives, it's still better than nothing. As long as the sides protected by the nillkin hit the ground first I believe you should be ok.
I ordered it about a week ago, should be here in one or two weeks and I'll be able to provide a more hands-on opinion.
Click to expand...
Click to collapse
Ehh.. Can't resist the temptation. After reading some more reviews from the G2x Thread and the Nexus S post I think I'll get it..
I've always been a fan of rubbery/TPU cases myself. Most hard cases I've used in the past pop right out when dropped and those "light" hard cases don't protect your phone on all sides.
Dunno, just seems a bit light on the protection in the end and more expensive than TPUs.
I really like this incipio feather. Its hardly noticeable.
OK so my Nillkin case finally came. I didn't expect much since in the past I bought some other products made to look like other product (ripoffs). Thought this was the case with this and the Incipio Feather. I'm happy to say that it I was wrong.
It adds very little bulk to the phone, and has a snug fit. It feels much better in the hand, due to the rubbery finish, and the cutouts are exactly where they should be.
The screen protector bundled is acceptable although as I was previously aware, due to the curved screen there is a small gap on all sides and the top and bottom does not stick very well. There probably are are better ones out there but I'm happy with it.
I'm not into the habit of dropping my phone so the minimal protection it offers is enough for me. If you are looking for a case to withstand minimal impact, prevent scratches an look awesome I do not believe there is a better alternative for the i9023.
Flukzr said:
OK so my Nillkin case finally came. I didn't expect much since in the past I bought some other products made to look like other product (ripoffs). Thought this was the case with this and the Incipio Feather. I'm happy to say that it I was wrong.
It adds very little bulk to the phone, and has a snug fit. It feels much better in the hand, due to the rubbery finish, and the cutouts are exactly where they should be.
The screen protector bundled is acceptable although as I was previously aware, due to the curved screen there is a small gap on all sides and the top and bottom does not stick very well. There probably are are better ones out there but I'm happy with it.
I'm not into the habit of dropping my phone so the minimal protection it offers is enough for me. If you are looking for a case to withstand minimal impact, prevent scratches an look awesome I do not believe there is a better alternative for the i9023.
Click to expand...
Click to collapse
Thanks for the review, think I'll buy this one.
I've been using a Incipio Feather and I'm loving it!
Hey, do you have a link for that Nillikin case? Bc I went on their website and I didn't see anything.
tase25 said:
Hey, do you have a link for that Nillikin case? Bc I went on their website and I didn't see anything.
Click to expand...
Click to collapse
Look around on obostore.com. I decided last minute that I wasn't going to get this case, but get the silicone and TPU cases from Nillkin. Anyone have either of them(Nillkin Silicone/Nillkin TPU)?
Got a Nillkin lately which is OK. Wondering though how does it compare to Incipio Feather in terms of thickness. Which one makes it more bulky ?
BTW, wondering any frame cases for NS...
Quite like the look of the Case-Mate. Seems like a good balance of protection without adding to much bulk to the device.
The thin cases like these really do help... although they look skimpy they have saved my Nexus a few times. I dropped it down the stairs the other day and not a scratch. If it didn't have it on there I don't know how smashed up the back would have been...

IMAK Cowboy case - what material is this?

I came across this ordinary looking hard case on ebay but on closer inspection it seems to be made from a very different material then your normal plastic/tpu case. Does anyone have any experience with this case?
www ebay com/itm/IMAK-Cowboy-Shell-Ultra-thin-Case-LCD-Protector-For-Google-Nexus-7-ASUS-/261103766516
(sorry links not working yet)
etal2 said:
I came across this ordinary looking hard case on ebay but on closer inspection it seems to be made from a very different material then your normal plastic/tpu case. Does anyone have any experience with this case?
www.ebay.com/itm/IMAK-Cowboy-Shell-...otector-For-Google-Nexus-7-ASUS-/261103766516
(sorry links not working yet)
Click to expand...
Click to collapse
From the pictures it seems to be similar to the Rock QuickSand cases:
http://forum.xda-developers.com/showthread.php?p=28344476
Wow I like this case. I'm half tempted to buy one although I really like a flap on my tablets for when lugging it around. Sometimes my hands get full and I use my tablet as a tray to balance a soda and some snacks. I have a screen protector, but it would be kinda weird.
This case looks very cool though. I really like the blue, gray, and the red. I'm curious how they feel though. Is it like a sandpaper texture or a rubber matte? I have a similar case for my Galaxy Nexus and it barely adds any bulk (why I like it). My Ringke Slim is a glossy smooth finish, unlike this one.
This would be an ideal case for people who just want to provide protection from the back and some side action... but not interested in a TPU case.
Anyone with an IMAK Cowboy case on the LG G2?
Fits OK?
Lot it and love it !!!
Perfect :good:
jvidia said:
Lot it and love it !!!
Perfect :good:
Click to expand...
Click to collapse
Could you post some photos of it please!
I am looking at that case but afraid the back is too rough..

Looking for a non-slippery back cover / back plate (not case).

Does anyone here know of a website that sells a back cover / backplate that is like the one on the Galaxy S5 (with dark blue backplate, the white one is slippery)? It doesn't have to have the same design but I am just looking for something that has a grip and is not slippery. Probably a matte now.
I miss how easy it is to hold my S5.
Note that I am NOT looking for a case. A skin can work but I don't think Dbrand or the others make the phone not slippery based on the many reviews I read (they only add a little bit of a grip).
I have a very slim Ringke Slim matte case for my G4 and it works but I'd rather not use a case as it makes it slightly bigger and gets stuck in my pocket.
Thanks in advance!
Edit: If anyone has the leather covers (not black as I have that one and it's slippery), please let me know the color and if it is slippery or not.
The colored ones aren't very slippery, the brown one is smooth, thus slippery
Kawaisa said:
The colored ones aren't very slippery, the brown one is smooth, thus slippery
Click to expand...
Click to collapse
I heard that the brown (tan) wasn't as slippery as the black one. hmm, interesting that you tell me it is :S.
The tan leather is very slippery. The plastic backs are not.
hordarian said:
The tan leather is very slippery. The plastic backs are not.
Click to expand...
Click to collapse
I have the "metallic" plastic back and when it's hot outside it's not that slippery but when it's cold (I live in Canada), it's very slippery.
I have the black leather that came with the phone, and also the orange-ish one. The black is not slippery at all for me, the Orange one is, but I have not used it regularly enough to see if it will get that way. The black cover was a bit slick, but after a couple of weeks, it lost that smoothness and the shine. Quite nice, for me.
I have the T-Mobile brown leather back, and while the leather has a smooth feel to it, it is not at all slippery. I use the G4 with one hand and two hands at times, and l have never felt like it was going to slide out of my hands.
If you want to make a plastic back less slippery, just use plastidip on it. You get to change the color to whatever you want and add a super amount of grip
munkypoo7 said:
If you want to make a plastic back less slippery, just use plastidip on it. You get to change the color to whatever you want and add a super amount of grip
Click to expand...
Click to collapse
That's a good idea. Never knew that existed. I'll see if I'll try it out or not as I read that for some it peeled off? Did you try it?
I did it, if you let it cure, it takes quite a bit to peel off but the more coats you do the better.
munkypoo7 said:
I did it, if you let it cure, it takes quite a bit to peel off but the more coats you do the better.
Click to expand...
Click to collapse
So you apply it once, then wait how long to apply second coat?
And after you apply last coat, how much to wait til you can use it?
Plasti-dip user here I use that stuff on everything, follow the directions on the can, ideally you want to apply 5-7 coats all within 1hr of each other but try not to exceed 2hrs between coats, this will seperate the coats rather than making them adhear as one strong coat, done correctly the plasti-dip will heal as one strong layer you can peal off in the future with some force without ripping into small pieces.
YouTube has tons of info on plasti dip you will be amazed all the fun things you can do with it, look into water based plasti dip if you want really funky designs.
I use egrip on the plastic back.
Works great. Been using on every phone for years .
mswlogo said:
I use egrip on the plastic back.
Works great. Been using on every phone for years .
Click to expand...
Click to collapse
Thanks! I'll look into that. Seems like it could be it. Wish there was a backplate like the one on the dark blue S5 that I could buy .
So, are there any good alternative back covers?
I really like the phone, but the plastic covers seem too cheap and ugly.
I've seen some really nice cases, but they add bulk.
I'd like to know if there are other solutions.
Corduroy-21 said:
So, are there any good alternative back covers?
I really like the phone, but the plastic covers seem too cheap and ugly.
I've seen some really nice cases, but they add bulk.
I'd like to know if there are other solutions.
Click to expand...
Click to collapse
Back covers, I don't know of any really grippy ones. Tried searching but couldn't find good ones.
The case I have hardly adds bulk, it's hard plastic but has a matte coating, very soft and adds a good amount of grip, and it's quite solid. It's called Ringke Slim. Came with the phone when I bought it from someone else. You can find it here: http://www.amazon.com/LG-Case-Technology-Protection-compatible/dp/B00V3YHIQ6
You can check skins from dbrand and slickwraps but I don't think they provide the grip I'm looking for.
I still am trying to avoid having a case on all the time so what I learned from this thread is to try out egrips: http://www.egrips.com/products
I'm still not sure about egrips though as I read others complaining that they only stick for 2 weeks and some for a few months and then you have to apply another. Some complained that they fall off right away.
So, I kept researching and found some great grip tapes (gt-50 for phones and others) on amazon.com but I live in Canada and lots of products from amazon.com don't ship to Canada and they're not available on amazon.ca. Really annoying! Those seem really good.
On .ca I found some grip tape but it's not for phones and I'm not sure if it will work well on my G4.
I'll check eBay.
Ramsey said:
Back covers, I don't know of any really grippy ones. Tried searching but couldn't find good ones.
The case I have hardly adds bulk, it's hard plastic but has a matte coating, very soft and adds a good amount of grip, and it's quite solid. It's called Ringke Slim. Came with the phone when I bought it from someone else. You can find it here: http://www.amazon.com/LG-Case-Technology-Protection-compatible/dp/B00V3YHIQ6
You can check skins from dbrand and slickwraps but I don't think they provide the grip I'm looking for.
I still am trying to avoid having a case on all the time so what I learned from this thread is to try out egrips: http://www.egrips.com/products
I'm still not sure about egrips though as I read others complaining that they only stick for 2 weeks and some for a few months and then you have to apply another. Some complained that they fall off right away.
So, I kept researching and found some great grip tapes (gt-50 for phones and others) on amazon.com but I live in Canada and lots of products from amazon.com don't ship to Canada and they're not available on amazon.ca. Really annoying! Those seem really good.
On .ca I found some grip tape but it's not for phones and I'm not sure if it will work well on my G4.
I'll check eBay.
Click to expand...
Click to collapse
The case looks nice, does it add any bulk?
It is strange that for a phone with changing covers there are dozens of cases and not alternative backs.
I'm thinking for a skin maybe.
Corduroy-21 said:
The case looks nice, does it add any bulk?
It is strange that for a phone with changing covers there are dozens of cases and not alternative backs.
I'm thinking for a skin maybe.
Click to expand...
Click to collapse
It adds only a few mm bulk, it's the thinnest case I think. It doesn't bother me at all. I still want a skin or a grip tape.
Ramsey said:
It adds only a few mm bulk, it's the thinnest case I think. It doesn't bother me at all. I still want a skin or a grip tape.
Click to expand...
Click to collapse
I have this and it's the best case I know for not adding bulk . quite good grip but I'm going to put carbon fibre wrap on as it looks a good fit.
About Skins, if anyone is interested, based on what I researched, I found that the leather series from Slickwraps offer the best grip for our G4. The only skins that surpass it in grippiness is the Natural Series from Slickwraps. From the natural series, the real leather one (it's actually real leather ) has a super grip as reviewers state. Sadly, no natural series yet for the G4 .
I don't have any skin but I think I may end up with the vinyl leather from slickwraps, which is made by 3M. I'm going to shop first for some vinyl tape at a store here to see if I could just use that instead of paying a lot for a skin.

Categories

Resources