! Urgent ! SPV M3000 - Blocked on 1st screen !? - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Hello,
I've tried to upgrade my French SPV M3000 to the Aku 3.5 V3.5.5.1 Rom...and the upgrade window stopped at 96%...
My SPV M3000 is a G3, with IPL : 1.03 & SPL : 1.03.0000.
Now The PPC is bloked on the 3 colours screen which shows the IPL, SPL but no GSM & no OS on it...so I can't synchronize it with my PC to do any upgrade such as with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe...
What's the solutions ?
Tks for your help...

up, please

Hi i've got the same problem... i was flashing to crossbow 1.5 and it stopped at 5%
please help

guys.. number one.. make sure ur device is CID unlocked before you flash anything but the carrier ROM. for now, go back to the WM5 ROM that your carrier released and try again. I'm guessing that your device isnt a G4, which there would be a totally different procedure to flash WM6 for.
-Nstefanelli-

ok i found something... download http://www.tm-phonedownloads.com/files/RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Ship.exe this and flash yuor pda to wm5 by t mobile... its sux but works :]

KreTsky said:
ok i found something... download http://www.tm-phonedownloads.com/files/RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Ship.exe this and flash yuor pda to wm5 by t mobile... its sux but works :]
Click to expand...
Click to collapse
Tks,
So, I've to take 1st that *Ship.exe which is the TMobile rom...I've seen that rom on the tuto about flashing G3 rom...
regards
I'll test and go back

eleger91 said:
Tks,
So, I've to take 1st that *Ship.exe which is the TMobile rom...I've seen that rom on the tuto about flashing G3 rom...
regards
I'll test and go back
Click to expand...
Click to collapse
Flashing to 2.x IPL/SPL is probably a good idea in your case (hope you have CID unlocked before doing so..) ..I didn't think you can run WM6 with IPL/SPL 1.x.. Not sure if AKU 3.5 means WM5 or WM6..

Related

Good ROM/Radio Assessment Article

http://www.pocketpcmag.com/blogs/index.php?blog=3&p=518&more=1
Author's conclusion is that ROM 1.6.7.1 with radio 01.13.10 is the fastest EDGE and USB connection speeds with stable ROM. I'm using a ROM 1.6.11.1 with 01.13.10 radio with great results.
Enjoy
Craig
Best rom for I-mate k-jam
What is the best rom for an imate k-jam? I am running 1.1.9.3 with radio 01.01.10
Re: Best rom for I-mate k-jam
jr97ai said:
What is the best rom for an imate k-jam? I am running 1.1.9.3 with radio 01.01.10
Click to expand...
Click to collapse
Your iMate KJAM is a HTC Wizard thus the author's recommendation of ROM 1.6.7.1 & Radio 1.13.10 is valid. I have a MDA Vario and flashed to this combo with no problems. There is no "best" ROM as the hardware is basically all the same.
By reviewing this xda-developers section on Wizard, you'll form an impression on what works and what doesn't and the pluses / minuses of each.
All the best,
Craig
Question... What is this making sure your phone is CID unlocked?
Carrier unlocked?
Mine is an unlocked Imate K-Jam?
Can I just upgrade the Rom?
Thanks
jr97ai said:
Question... What is this making sure your phone is CID unlocked?
Carrier unlocked?
Mine is an unlocked Imate K-Jam?
Can I just upgrade the Rom?
Thanks
Click to expand...
Click to collapse
Look in aWizard ROM util link
Forgive me gentlemen as I am very new to this specific device... I ran the Awizard tools and used the CID unlock and backed up that file... I'm assuming that is to restore it incase of sending in for warranty?
I then backed up all (radio, rom, extended)
Okay so now my question is... Can I just run the Qtek rom executable or should I used the Awizard tools to do the Radio and Rom seperately...
Is there any difference? Can I even just upgrade by double clicking the executable? Will it give me a new extended rom then?
Finally, is there any software differences between the Qtek and the Imate?
I just want to use the Qtek rom until the latest I-mate rom comes out.
Thanks for your guys help.. I know you will be able to answer my questions....
best rom for wiza200 ?
hi , iam new in updating rom can sum2 please let me know the best rom for my o2 mini s my current specs are :
ROM VER. :1.1.7.5
ROM DATE : 9/22/05
RADIO VER : 01.08.10
EXT ROM VER. : 1.1.7.105
PLEASE HELP
THANX
I was using the 1.13.x radio ROM and I never got above two bars even in spots where my Sidkick2 had a full set. I dropped down to 1.10.x and now it works almost as well as the SK2. Im using the 2.8.somthing test ROM though
thanks, i've been with 1.1.9.3/1.13.10 and its running great, but after reading this atricle i'm upgrading to 1.6.7.1/1.13.10 right now!
thanks for refferring the link

Need Q9100 rom

Hey guys i need Original Rom for Qtek 9100
i wanna flash it with original room to get WM6
please any help
cyberbot said:
Hey guys i need Original Rom for Qtek 9100
i wanna flash it with original room to get WM6
please any help
Click to expand...
Click to collapse
There's no official (original) wm6 qtek 9100 rom update from the provider.You'll have to flash the latest custom build Wm6 Roms,which you'll find so many here in this forum.
first,you'll have to check & confirm,which device you have, G3 or G4.
If its a G3 phone,you'll have to SIM/CID unlock the phone first and then upgrade to any wm6 rom,but if its a G4,you can upgrade through 'HardSPL' or 'SoftSPL' method.
Cheers!
i have G4
i want to get advice in wich Rom you advise me to use

upgrading Wizard G3 from WM5 to WM6

Dear all,
i have T-Mobile MDA G3 with me and is unlocked, i can use sim of any cellular company on my cell and working fine. Its SPL/IPL is 1.08 can anybody please suggest me the link to download WM6 or WM6.1 full featured and free whichever is good for my wizard moreover any further steps in order to be on a safer side while updating my wizard. Looking forward for your response.
Your wizard is simunlocked, but is it also CID Unlocked ?
Dear Gammapooka,
thanks for your reply, i m newbie in this field can you please advise me how to check whether it is CID unlocked or not :$ moreover any torrent - source from where i can download wm6 to upgrade it.
can anybody please suggest me from where i can download the WM6 software and which one is good for my WIzard G3.
barjees said:
can anybody please suggest me from where i can download the WM6 software and which one is good for my WIzard G3.
Click to expand...
Click to collapse
If you are looking for wm6 Rom,then there's no official wm6 rom update offered by any vendor,but if you want to upgrade to any custom build wm6 rom then check out the below link:-
http://forum.xda-developers.com/forumdisplay.php?f=356
But,before upgrading to any wm6 rom,you got to have your phone CID unlocked first,how to CID unlock? read the guide here :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
thanks for your reply zabardast_1 but still i m confused bcoz lots of ppl have posted lots of comments. I did download T_MOBILE_WIZARD_DOWNLOAD (RUU) is it rom which will upgrade my WM5 to WM6 or i need something else? at present my IPL/SPL are 1.08 looking forward for your response.
barjees said:
thanks for your reply zabardast_1 but still i m confused bcoz lots of ppl have posted lots of comments. I did download T_MOBILE_WIZARD_DOWNLOAD (RUU) is it rom which will upgrade my WM5 to WM6 or i need something else? at present my IPL/SPL are 1.08 looking forward for your response.
Click to expand...
Click to collapse
Like I said earlier,no official wm 6 upgrade is offered,so this rom is also wm5 and not wm 6,if you want to upgrade to wm6,you'll have to upgrade through custom build wm6 roms,present here in this forum.

Hard SPL 1xxxx for (Brand), HTC Herald , (P4350)

Hello friends, one question. My SPL and IPL is 1.01.0001.
I can't unlock my device?
Thank you masters.
elitemovil said:
Hello friends, one question. My SPL and IPL is 1.01.0001.
I can't unlock my device?
Thank you masters.
Click to expand...
Click to collapse
Unlocking is one thing. Hard Spling is another.. All you have to do is update your rom.. So ahhh well are you using a american wing or htc herald?? American wing just get the newest update if your using the herald get that newest update and it should update your spl to 4.xxx then there you go.. Hard spl that baby!!! lol.. just search for updates.. way easy man..
Hello!
Hello Master!! My device is updated!!! My ipl and spl 4.7yang!!!!
Thank youuuuuu!!!!!!!!!!! Now upgrade to WM 6.1!!!!!!!!!!!!
Okay, I have SPL 1.10.0001 on the phone. It is a branded Vodafone one, but with HTC still on the case. What must I do? Any ideas? The direct flash with WM6 gives an error, so if anyone can assist, I would appreciate it ...
Hello friend.
1º update your herald with rom:
http://rapidshare.com/files/50472900/HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe
Your device now is updated to ipl 5 and spl 5
2º Then visit this link:
http://forum.xda-developers.com/showthread.php?t=358225
3º Your device is free for update WM6.
Thanks!!!
Awesome! Thank you so much!
Sim Unlock required pls !!
Hi Dear All , i searched here for 3 days about how to unlock my HTC herald on Mobinil Network in Egypt , but without any guaranteed result , so what i need is to sim unlock it , and update it to any suitable ROM WM6 or 6.1
I got this link ,,, and i would like to ask if these methods working with me , i don t need to brick my phone , http://forum.xda-developers.com/showthread.php?t=358225
My HTC P3450 info is
ipl 1.08.0001
spl 1.08.0001
gsm 02.71.90
OS 1.8.0.0
Thanks
elitemovil said:
1º update your herald with rom:
http://rapidshare.com/files/50472900/HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe
Your device now is updated to ipl 5 and spl 5
Click to expand...
Click to collapse
Hmmmm ... it sais "Invalid vendor ID" after 1%; then the phone reboots. Any idea what to do first? Should I install some of the cab files from the second link?
I think that you can repair to the factory. It was locked. You didn't unlock(香港生孩子_wwwmyhkbbcom).

** QTEK 9100 WITH WINDOWS 5.0: possible upgrade to windwos 6.5 ? **

I own a Qtek 9100 (G3) with OS Windows Mobile 5.0, would it be possible to upgrade to version 6.5 of Windows Mobile. How? There are real improvements with S.O 6.5?
anyone can me answer?
yes dear
yes dear you can
Hi,
I am a happy owner of a Qtek 9100 which originally had Windows Mobile 5.0 ITA.
course and following the upgrade guide I proceeded on my PocketPC (G3) with "Windows 6.1 beta 2 carbonara" I have to say is very stable.
The only thing I noticed is that after you upgrade your phone with the first ROM so I changed the values IPL and SPL but I do not put them equal, and that is me put them IPL 1.01 to 1.06 SPL I tried to upgrade 3 times and always successful but the values are always different.
So finally I decided to continue, I unlocked the CID with a dedicated tools and since I could not find a good link for the ROM T-LOVE I decided to directly load the ROM of Windows 6.1 to carobonara.
The procedure was successful and the phone is a bomb. I am very satisfied with this ROM, but my question now is:
I find myself with these values
IPL 1.01
SPL 1.06
gsm 01.12.10
OS. 4.0.0.
And 'normal IPL and SPL or need to be in the same? Is there a way to update only those? And from now on I can load any other ROM widzard for G3 even those with Windows 6.5?
Thanks again for your attention!
hi, gracco.
can u tell me how upgrade your Qtek 9100 from WM5 to WM 6.1 step by step or give me some link. and how i make it with WM 6.5
thanks
grishitu said:
hi, gracco.
can u tell me how upgrade your Qtek 9100 from WM5 to WM 6.1 step by step or give me some link. and how i make it with WM 6.5
thanks
Click to expand...
Click to collapse
you can update from 5.0 to 6.5 directly. .
first read this
http://forum.xda-developers.com/showthread.php?t=332320
after you done it, just download one ROM from this link
http://forum.xda-developers.com/showthread.php?t=492532
and that is that . .
p.s. for this you must have Windows XP and Active Sync 4.5
Help me whit a Qtek 9100
Hello. Can I use the Wizard Service too Qtek 9100l to change only one OS version from version 5.1 to 6.1 without change for SPL or IPL? I have a G4. Somebody help me to change the version in Windows Mobile 6.1 software. I mean this way can not use an upgrade program like "ROMUpdateUtility_Wizard_NoID.exe" because the connection to USB phone is down after the restart in Bootloader. Thanks in advance.
gracco said:
anyone can me answer?
Click to expand...
Click to collapse
yes,actually i have a qtek a9100 or htc wizard with windows mobile 6.5,and i think i´m very lucky because the rom works perfect! i downloaded from here,but i dont remember which one exactly,but leave me a message so i can send you by e-mail or something

Categories

Resources