hello, i have upgrade my 9090 to wm6,1. the only problem is my keyboard. it is diferent of normal keyboard saled on market (is a regional version, with more acentuations)
There is a way to edit the keyboard input to trade the keys to the layout of my key?
thanks a lot(from all brazilians then have the same problem hhehehehe)
hello, in ftp page there is some options of keyboard setting to instal
how can i know than is my keyboard and how i do a backup to test one by one?
thanks
Hi.
If you need Finnish or Swedish keyboard layout for your Touch Pro download it here.
Install to device -> soft reset.
- ä = Fn + a
- ö = Fn + o
- å = Fn + p
IMBA! ill try it out now
Thats for t9. It does not help making the Hardware keyboard make åäö.
Im using Nrg Rom and if your nor suplied with the swedish flies this does not work...
t9 works fine thoe. but nothing allse.
The hardware keyboard is a easy regedit to make it swedish,
HKLM\HARDWARE\DEVICEMAP\KEYBD\
Change CurLang to 1044 and softreset for swedish hardware keys.
your not lissning. even thoe i do that with the nrg rom you still dint get the åäö to show upp! like i said. in all the software modes when using the screen too klick it works without a problem.
But as soon as a switch over and open upp the hardware keyboard it will not typ åäö. If i do Fn + O for exampleall it does is make a normal o...
no problems for me using the same rom, you did install the touch pro keyboard cab right?
jimmyhawkin said:
your not lissning. even thoe i do that with the nrg rom you still dint get the åäö to show upp! like i said. in all the software modes when using the screen too klick it works without a problem.
But as soon as a switch over and open upp the hardware keyboard it will not typ åäö. If i do Fn + O for exampleall it does is make a normal o...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=430208&highlight=hardware+keyboard
And use this tool to change the layout from a fuze rom keyboardlayout, to a "htc" rom keyboard
Or my newest creation: http://forum.xda-developers.com/showthread.php?p=3512681
Hi there m8. Even with your program it still does not help me. If you open upp my Phne and start using my Hardware keyboard with the nrg rom it wont make Ö when i do FN + O....
I just get a normal o.
So im not doing anything wrong and what it seems is that everyone does not understand that this is not the REGISTRY that is the problem. Or if the keyboard is set to fuzz or HTC keyboard.
It seems as if the Swedish files are not in Nrgs rom so ÅÄÖ wont show no matter what registry fixes you do.
So i think that what is needed is the Swedish files in order for this to work. NOT any registry fixes... Do you understand my problem now?
Cause i used your program. I have tried about 5 diffrent regfiles witch realy does about the same thing
and as i see your program is allso just a reg changer that changes the curlang 2 = 41d
Witch beliave me or not its set 2 and i still only get a o when typing FN + O witch should then become a Ö
what version of the nrg rom are you using?
i have ran 1.5, 1.6, 1.7 and 1.0 (1.8) and all of them are fully capable of running the Swedish hardware keyboard.
install the touch pro keyboard cab located in the nrg rom thread softreset, change curlang to 1044, softreset and thats it.
Im not sure what files you are after, i can´t recall that i have ever read about any language files for the hardware keyboard, T9 yes not not hardware keys.
if you are running the 2.x series im am fully willing to flash my rom and try the exact same think since im confident that it will work.
Please answer this question:
Did you or did you not install the touch pro keyboard cab for the nrg rom?
Use 2.0 and used the keyboard changer thats in the rom.
???
Hi.
I have used that cab with almost every EnergyROM version there has been (including betas) and that cab has always worked fine. I also tried one 6.5 version and this cab was not working with it - allthough, I did not try very hard...
Things I do:
- change regional settings -> Finnish
- change keyboard layout to Touch Pro
- install the cab
- soft reset
=> now it should work...
@6sto
Tried to do exactly what you wrote, but without success.
I am using EnergyROM Series 2.0 Build 32409
Ouch
Sorry to hear that it didn't work. I apologize but I can't help you any more with this. I hope we have much better helpers here in XDA-developers. Can you help with this issue? Everything is working OK with my Touch Pro!
---
Hey, have you tried this? http://forum.xda-developers.com/showthread.php?t=496876
I figured it out.
The danish keyboard layout and norwegian is the same. So if I choose norwegian it works
not sure what to say, just flashed the latest nrg 2.0 as i promised, changed keyboard with the provided tool, power cycled like i was prompted to do, changed curlang to 1044 and softreset, and now i have my Swedish hardware keyboard.
Do you realy have ÅÄÖ visual when typing FN + o on the hardware keyboarD? i failt do think you do that. on t9 yeh. but not on the hardware keyboard.
And with Nrg rom 2.0 i changed to nor fin swe dk well all but still when typing fn+o i get = o.
And used the keyboard program so its Htc keyboard and not fuzz. Nothing will do it it seems.
jimmyhawkin said:
Do you realy have ÅÄÖ visual when typing FN + o on the hardware keyboarD? i failt do think you do that. on t9 yeh. but not on the hardware keyboard.
Click to expand...
Click to collapse
Yes, i dont use T9 at all, only hardware keyboard.
Please write in detail what you are doing after you hardreset your device.
follow the steps like both i and others have written in this thread, dont skip any steps and it will work for you.
jimmyhawkin said:
And with Nrg rom 2.0 i changed to nor fin swe dk well all but still when typing fn+o i get = o.
And used the keyboard program so its Htc keyboard and not fuzz. Nothing will do it it seems.
Click to expand...
Click to collapse
you do change the regkey to 1044 in decimal value and softreset after you change the keyboard layout to touch pro right?
in the 2.0 all you need to do is change to touch pro keyboard and then change curlang to 1044 decimal value and softreset, that is it.
im not sure how to help you, i even flashed the 2.0 to test it for you, no problems at all, i honestly suggest you start looking at what you are or are not doing compared to the guides.
Follow the guides we wrote for you and it WILL work.
Good luck.
It is acualy as you say. If you direcly after installing the rom do as you say it will work. BUT here comes the tricky part.
What if you want both the hardware keyboard to work. And the t9?
Cause id realy like to have the phone as it is in the swedish vertion. Were both are working.
Cause as of now i know how to get either t9 or hardware keyboard working but not both.
Anyone that knows a solution to getting the t9 in swedish when you have hardware working?
I have a Touch Pro that was bought with a French WM6. I update it with a original HTC English Rom update and everything works fine. I would only like to change the keyboard back (probably should have backed it up before I did Rom update) to azerty. Can anybody tell me how to do that for the hardware keyboard and the onscreen keyboard?
I tried the procedure that makes you change the register key but don't work for me.
I've seen some .cab files going around to make these changes for many other languages, does it also exist for Dutch (Belgian) of French (Belgian).
Thanks
Please ignore this thread
Will start a new one cause this is not accured anymore.
i don t know
i know just use BDR to change the value but i am not sure
I installed a ahmedkry's WM 6.5 ROM (WWE) and I've been trying to find a way to type greek characters using the software / hardware keyboard. I am not interested for greek ROM translation, greek menus, greek dictionaries etc. Just typing support as 2nd language (replacing the current ones: àáââäåæç).
I have already tried some registry key changes (HKCU/MUI/CurLang) to 0408 and software reset but it doesn't seem to work.
Any ideas?
Moved as not ROM Development.
Software keyboard kinda solved, by installing a 3rd-party keyboard (Zoomboard) which supports multiple languages.
However, I'm still looking for greek layout support for the hardware keyboard of TyTN II. If anyone has any ideas, feel free to share.
Thank you.
aggelosp said:
Software keyboard kinda solved, by installing a 3rd-party keyboard (Zoomboard) which supports multiple languages.
However, I'm still looking for greek layout support for the hardware keyboard of TyTN II. If anyone has any ideas, feel free to share.
Thank you.
Click to expand...
Click to collapse
Need it myself also...just updated to win 6.1.
AEKMap (h**p://ae.inc.ru/aekmap.php) or AE Keyboard Mapper should solve the problem for you. It maps external keyboards. There are preset greek layouts that you can download from the site. My Xperia X1 works that way.
Hi
i've done a hard reset on my htc tytn II today. everything was normal except for a little problem with the physical keyboard. My keyboard is AZERTY but when i try to write on it is like it was a QWERTY.
Anyone can help me change the keyboard map to azerty again?
Sorry for my bad english.