Hey there,
I have 2 questions which I seem to be unable to figure out. But so far I can't find the answer here in the forum, nor on the internet in general, neither in my registry....so please help me out
First all, I would like to have the size of my carrier which is being displayed in Manila to be bold or bigger in some way. It's quite annoying when driving nearby the border of the country having to stare at my display (danger for car traffic lol) to see whether I'm still on my national carrier or if it has changed to the one of the other country.
Second: I'm using a so-called virtual carrier. So my phone always think's that I'm roaming. It displays the triangle on top of the screen (that doesn't bother me at all), but what bother's me is that it's displaying the name of the network of the official carrier + the name of my virtual carrier.
As example, mine displays: 3G NL KPN NL TELFORT. Which is pretty annoying as that doesn't fit in my screen If I'd be abroad it would display 3G NL KPN VODAFONE IT (for Italy). In my case, I just want to see NL TELFORT, or VODAFONE IT or... well, you get the point. I don't need to be constantly remembered of what is my official carrier.
I remember in WM5 I could change names in the registry, if I remember correctly. But I can't seem to find this in WM6.1.
Could anyone help me with this?
Go to [HKLM/Software/Microsoft/RIL/OperatorNames] with your registry editor and create a new String value with your network operator 5-digit ID.
"00000"="OperatorNameWhateverYouLike" (you can enter any name you like, but it has to be a valid 5-digit ID for your operator)
Soft reset, or just reinitialize TF3D.
Example for Beeline (Russian GSM network) "25099"="Beeline"
Operator IDs have to be searched for. Some of them can be found here, or go to
[HKLM/Drivers/BuiltIn/RIL]
"StoredIMSI"="00000xxxxxxxxxx" - First 5 digits of your IMSI should match your current Operator ID. Good luck!
Thank you!! This has already helped me 75%
I hope someone coudl help me also getting the characters bigger
akito said:
Thank you!! This has already helped me 75%
I hope someone coudl help me also getting the characters bigger
Click to expand...
Click to collapse
You're welcome. I'm pretty sure this cannot be done by registry changes. It's probably inside one of the Manila files.
Hi I have a big problem, I can send MMS in full size, but when I get a MMS and it downloads its shrinked to almost 12 kb (very small picture) can hardly see whats on the picture...
I'm on Three network in sweden, I have never had a problem with MMS with them and I had alot of phones from them....
I have tf3d installed, is it maybe causing the problem?
Anybody experience the same problem?
Anybody have a solution?
Thanks
check this thread( in swedish).
Same problem as you
http://www.minhembio.com/forum/index.php?showtopic=213547
Ok thanks u, I wrote in that thread but I write here to because I'm here more often...
I have the same problem but it seems I have it even if the sender is not on 3 (three) I tried mms from a comviq mobile and the result is the same....
Have u maneged to fix it in anyway?
I search the net and I can see alot of WM mobiles have this problem, but some in here on the XDA have got a cab to fix it and make mms work...but I don't know if the cabs work on Xperia and sweden.
http://forum.xda-developers.com/showthread.php?t=274168&page=5
See post number 57
http://forum.xda-developers.com/showthread.php?p=1505432
Do you think it will work for us with the xperia (three problem)
Anybody have a solution or can think of one?
They have found a solution for the Samsung omnia with the same problem
http://forum.xda-developers.com/showthread.php?t=421893
Somebody have to help us with the xperia..anybody that can look into it?
Nobody have the same problem? have anybody a solution? please help MMS is very important to me!
Have you reported this to the X1-support? If you haven't you should really do it.
Regards,
Michael
I have the same prob on Tmobile USA. I think because my carrier doesnt regconize the handset as one of their known phone so they shrink the pic size to the minium resolution. I dont know if that is true. It's really annoying.
Rodin69 said:
Have you reported this to the X1-support? If you haven't you should really do it.
Regards,
Michael
Click to expand...
Click to collapse
I have not done that, because I think the problem is with the carrier THREE and as romeo0119 wrote T-Mobile in the US, it is the carrier that doesn't recognize the phone, I have reported to them but they are incompetent ***** But I will report to X1 support and see what they have to say.
MMS picture size
Hi Kevin,
I have exactly the same issue on my X1 but im with O2 (via CPW).
I received a MMS pic today for the first time and it also re-sized it to 12kb and the pic ended up being rediculously small....
I would be apprecative if anyone else has experienced this or if there is anyway to fix it....?
Cheers
Phil
MMS picture size
Hi,
Im having the same problem . I have reported this to X1-support so just waiting for a reply. I also tried the fix they found for the Samsung omnia just for trying sake but this did not work. I will post any reply i get back from X1-Support.
Tricky1982 said:
Hi,
Im having the same problem . I have reported this to X1-support so just waiting for a reply. I also tried the fix they found for the Samsung omnia just for trying sake but this did not work. I will post any reply i get back from X1-Support.
Click to expand...
Click to collapse
what brand your on? because mine works with telia and telia2 its only with 3 (three) it doesn't work...and please tell us what x1 support says
Anyone found the answer yet...?
Its getting so annoying only having small 17kb pictures sent to me.
No still no answer =(
There was one guy who had this problem over at esato and he fixed it. This is hidden in a rather long genieric thread so i'll just copy his post here...
"Basically, it has something to do with the phone not being set up, or directing to the correct 'profile' with the network operator. For example, my settings were directing to the Taiwan HTC website for some reason. Because O2 didn't have these settings, it was defaulting the MMS settings to how they were when MMS was first introduced.
The solution is basically using a program like PHM Registry Editor to change the profile, so it directs to the correct details. However, as there aren't any specific Xperia ones yet, you can have it use those of another phone. In my case, I have used the N95 settings, as these are ones set up on O2.
So, in the reg editor you need to go to HKEY_LOCAL_MACHINE - Software - Arcsoft MMS UA - Config - mm1 - WspHeader
There will be 6 strings in this part of the registry. You just need to edit the 'User-Agent' profile to:
NokiaN95/11.0.026; Series60/3.1 Profile/MIDP-2.0 Configuration/CLDC-1.1
And the 'Profile' string to:
http://nds1.nds.nokia.com/uaprof/NN95-1r100.xml
You don't need to reboot. And that should get the pics coming through at the correct size.
Hope this helps if anyone is having the same problem."
This thread
http://www.esato.com/board/viewtopic.php?topic=164743&start=6480
page 433 - his/her nickname is s32bauer...
mobmanX said:
There was one guy who had this problem over at esato and he fixed it. This is hidden in a rather long genieric thread so i'll just copy his post here...
"Basically, it has something to do with the phone not being set up, or directing to the correct 'profile' with the network operator. For example, my settings were directing to the Taiwan HTC website for some reason. Because O2 didn't have these settings, it was defaulting the MMS settings to how they were when MMS was first introduced.
The solution is basically using a program like PHM Registry Editor to change the profile, so it directs to the correct details. However, as there aren't any specific Xperia ones yet, you can have it use those of another phone. In my case, I have used the N95 settings, as these are ones set up on O2.
So, in the reg editor you need to go to HKEY_LOCAL_MACHINE - Software - Arcsoft MMS UA - Config - mm1 - WspHeader
There will be 6 strings in this part of the registry. You just need to edit the 'User-Agent' profile to:
NokiaN95/11.0.026; Series60/3.1 Profile/MIDP-2.0 Configuration/CLDC-1.1
And the 'Profile' string to:
http://nds1.nds.nokia.com/uaprof/NN95-1r100.xml
You don't need to reboot. And that should get the pics coming through at the correct size.
Hope this helps if anyone is having the same problem."
This thread
http://www.esato.com/board/viewtopic.php?topic=164743&start=6480
page 433 - his/her nickname is s32bauer...
Click to expand...
Click to collapse
Anybody have tried this?
it worksssssssssssssss! thanks alot mobman!
whats exactly you did ???
change the value of key for this:
NokiaN95/11.0.026; Series60/3.1 Profile/MIDP-2.0 Configuration/CLDC-1.1
o somethings different???
Thanks for your answers.
yes, in the registry under
HKEY_LOCAL_MACHINE - Software - Arcsoft MMS UA - Config - mm1 - WspHeader
change the user-agent string to:
NokiaN95/11.0.026; Series60/3.1 Profile/MIDP-2.0 Configuration/CLDC-1.1
and the x-wap-profile string to:
http://nds1.nds.nokia.com/uaprof/NN95-1r100.xml
its as simple as that. worked like a charm
figurine said:
yes, in the registry under
HKEY_LOCAL_MACHINE - Software - Arcsoft MMS UA - Config - mm1 - WspHeader
change the user-agent string to:
NokiaN95/11.0.026; Series60/3.1 Profile/MIDP-2.0 Configuration/CLDC-1.1
and the x-wap-profile string to:
http://nds1.nds.nokia.com/uaprof/NN95-1r100.xml
its as simple as that. worked like a charm
Click to expand...
Click to collapse
I did as you mentioned and it still not working
i did as mentioned and it WORKS!!!!!!!
THANK YOU!!!
I have read about this somewhere here but **** find it now. There is a number 1 in taskbar. I dont know what this is about, but dont like it. Is there any way to make it disappear ? Thanks ,
Noone knows anything? I am sure that is an icon to some .dll, If i knew which dll is, i could replace it with an empty icon..
I guess its the number for tel.line (some providers offer 2 tel.numbers in one simcard).
Forgot the key how to switch of, but you can change in registry.
Yes, I think that is correct, but does anyone knows where is this key in registry?
Hi!
I have problems with ROM version 1.69.401.01 - and its descendants (e.g.: Custom ROM by ansar) - that it displays my operator text and than adds five "y"s at the end. If I flash other ROM this is displayed correctly. No update has effect on this.
Real OP name is "T-Mobile H" and it is displayed as "T-Mobile Hyyyyy".
Can anyone give me some info on this? How the name is determined or is there a way to customize it?
Thank you,
Cina.
Same here, got "PLAYyyyyyyyyy" and "ORANGEyyyyyyyy"
Anyone? Must be a stack problem...
change the System Locale to US
Snake. said:
change the System Locale to US
Click to expand...
Click to collapse
No change.
Did you change the right value? The last two should be set to English (United States). Reboot the phone afterwards
Snake. said:
Did you change the right value? The last two should be set to English (United States). Reboot the phone afterwards
Click to expand...
Click to collapse
My bad. You were right. I've just changed the locale (second option) not the last two. It works. If I change back everything to Hungarian it gives back all my y's. I wonder if it is based on a registry entry or similar...
Thanks anyway,
Cina.
just leave it like this , I couldn´t find any difference between these settings that should have dramatic impact on the phone.
I've never faced this problem but i can't find how to change my phone name !
In parameters, system, about phone i don't see anything else than Model.
Do you please have a solution ?
build.prop? Because i dont really know what you mean. Bluetooth name? then in Bluetooth settings.
Yeh thank you, i have changed Bluetooth name.
I don't know if it's equivalent to te setting i was looking for.
When you first setup your mobile, at one moment your are asked for a name and this name appears sometime, using different applications.
This name parameter is usally accessible in "parameters, about phone, phone name".
But Android 8.0 doesn't show this parameter, that was my trouble.