Related
I want to keep all the O2 stuffs intact, is it possible to update only the CE and Radio ROM but not the extended ROM? I know the procedures I think, and I just need to delete ms_.nbf before running BaUpgradeUt? Will my O2 extended ROM stays intact this way?
How much better is 1.06.2 Radio ROM better than 1.02? Is it worth the update?
And after the update, I should just restore DATA but not full restore right?? Also, do I have to disable ActiveSyn before the update? If so, how?
Sorry about so many questions
Think ur ext rom will be blank this way
CL55
My answer to your question would be
Unhide the extened rom as is
unlock extenedrom as is now
make a copy of it as in on your desktop
do the normal upgrade
unlock/unhide the new extended rom
delete the content
copy from the destop your old extenedrom
lock/hide the exteneded rom again
do a cold reset.
this will boot the device, reinstall the os and radio and install the old extenedrom.
Do I think that that is a good idea, NO!! but that is what you want to do.
You need to undersatnd that some of the stuff on extened rom is for the new upgrade such as the patches.
So ... not that you asked ... I think what you want to do is swap only some of the files. but do you know which ones?
Read the bit on unllocking the Imate extenede rom
Read the bit about changing boot imaages.
Think about what you realy wont to do and have fun.
pleun, says:
Think ur ext rom will be blank this way
Click to expand...
Click to collapse
but it's not true. I've done that and your Extended ROM is not deleted
so:
1. You chose the ROM you want to use it (and you use xda3nbftool.exe if the ROM comes from another operator than yours)
2. Before launching the ROM installer "BaUpgradeUt.exe", you remove the Extended ROM package which is call "ms_.nbf"
and you update your ROM normally
Only the CE ROM and Radio will be upgraded. Your Blue Angel will keep your old Extended ROM.
And remember: If the ROM you have chosen comes in a package like BA_WWE_BelDT_12200_557_10602_SHIP.exe, you can open the ifile with WinRAR to extract its contents.
Simple solutions for a simple world!
ArtZ
True, only Qestion I have is why did I not Know that before?
Yup its simple and it works.
Now a real qestion for you based on you own knowleage.
Is there any way to add a Romkitchen Exteneded rom to the upgrade?
We seem to have know tools for this er2003edit does not work for me on the blueangle.
I have not been able to find any way of extracting splash screens but am able to replacing then (which is great but I dont have the original splashes)
Things are not only you know, your ways are not always the best.
Many users have been requesting the ROM for the production MDA's. I tried to upload it to the XDA-Developers FTP site but I could not upload it to the T-Mobile ROM directory so if a moderator can download this from the link I provided and move it to the FTP server for long term access.
Specs are as follows:
ROM Version 1.8.10.2 WWE
ROM Date 12/10/05
Radio Version 01.09.10
Protocol Version 4.0.13.20
This does not include the Extended ROM as that is already provided in the link below as this is where this request for the full rom was initiated.
http://d01.megashares.com/?d01=efbcdfc90bfae88ed9ac9ec8fcda5cc6
Scroll to the bottom of the page once you go to the megashares link and you will see the Download Now link.
If you need the Extended ROM follow this link: http://forum.xda-developers.com/viewtopic.php?t=41348
Question - you can't just flash back the extended ROM, right?
Yes but it is not the same procedure as backing up or writing a new ROM as you need a utility which I mention below. What you need to do is first "Unlock/Unhide" the hidden Extended ROM partition on your MDA. Once you do this you can see the extended ROM files which are posted in the link above. (There is a utility called Unlock Ext Rom Wizard.cab) on the XDA FTP server. You copy this to your MDA and click on it and it should unlock the parition/folder. After running it I would do a soft reset.
You can then use ActiveSync's Remote File Explorer Utility to move the files around as you will see the new partition when you select change folder.
Basically you copy your original extended ROM files to a safe location for backup and then delete all the files in the extended ROM directory. Copy the Extended ROM files that you downloaded into the Extended ROM directory and once you do a hard reset it will automatically install the new files when it boots up.
Ah, ok... thanks - I don't see the unlock tool for the Extended ROM though....
Nevermind... found it.
any changes, improvements or modifications worthy of mentioning in this ROM?
thanks,
How do you change the boot screen. I only see the ability to restore the radio and OS...
Extended rom is read only.. Please tell me that I am not going to have to reflash with an old rom to modify the extrom...
bradleydick said:
Extended rom is read only.. Please tell me that I am not going to have to reflash with an old rom to modify the extrom...
Click to expand...
Click to collapse
My Extended Rom is writable, but is still hidden. I think it may be due to the fact that I used aWizard 1.3b2 (from http://forum.xda-developers.com/viewtopic.php?t=37386) to remove the CID lock from my phone and change the splash screen. I then also patched my radio to 01.13.10.
Can the original poster explain how to restore the T-Mobile ROM? The utility that is in the folder did the CID unlock on my phone and all that successfully, but when I do option "w" (write OS ROM to device), it doesn't "find" the T-Mo ROM right there in the folder. I don't get it. =(
shdwphnx said:
bradleydick said:
Extended rom is read only.. Please tell me that I am not going to have to reflash with an old rom to modify the extrom...
Click to expand...
Click to collapse
My Extended Rom is writable, but is still hidden. I think it may be due to the fact that I used aWizard 1.3b2 (from http://forum.xda-developers.com/viewtopic.php?t=37386) to remove the CID lock from my phone and change the splash screen. I then also patched my radio to 01.13.10.
Click to expand...
Click to collapse
How do you find Radio 1.13.10 over the OEM delivered version? Any significant improvements?
Genesis3 said:
shdwphnx said:
bradleydick said:
Extended rom is read only.. Please tell me that I am not going to have to reflash with an old rom to modify the extrom...
Click to expand...
Click to collapse
My Extended Rom is writable, but is still hidden. I think it may be due to the fact that I used aWizard 1.3b2 (from http://forum.xda-developers.com/viewtopic.php?t=37386) to remove the CID lock from my phone and change the splash screen. I then also patched my radio to 01.13.10.
Click to expand...
Click to collapse
How do you find Radio 1.13.10 over the OEM delivered version? Any significant improvements?
Click to expand...
Click to collapse
When disabling Flight Mode, the original radio took about 30 to 45 seconds to get a signal. The new radio takes closer to 2 minutes. However, the new radio gets 3 bars of signal in places the old radio only got 1. I consider a reasonable tradeoff, as I don't use Flight Mode very often.
for updating the os rom and radio rom, it says please type the number, what number do i type?
jthurs said:
for updating the os rom and radio rom, it says please type the number, what number do i type?
Click to expand...
Click to collapse
I had that initial problem myself. I had to copy it to my C:\Flash since it didn't seem to work correctly off my g: drive under a few folders deep. I looked at the .cmd (batch) file at what it does is do a dir /s (directory listing including looking under subfolders) for *.nba files looking for radio or os in the filename. If you do not see a number then it is not finding the .nba files. When it does find them you will see the name of the rom file preceeded by a number. I would do what I did with the directories and if that doesn't work copy the .nba files into the root folder of the .cmd file folder.
i try to restore the rom with this flash.. the version on my phone is
rom : 1.8.10.2 WWE
rom date : 12/10/05
radio version 01.04.10
protocol version: 4.0.13.17
extrom version: 1.8.10.104
Hello,
Anyone has this rom ( Version : 1.8.10.2 )? If so, is it possible please upload. I'm searching for a wizard ROM which shows MM/DD/YY in device info ( i.e 12/10/05 ).
I request again, if you have please upload coz its urgently needed for me.
Best Regards
This ROM should have what your looking for.
LINK
-MyHTC- said:
This ROM should have what your looking for.
LINK
Click to expand...
Click to collapse
Thanks a lot. I was searching for this since from yesterday and there were no working links.
Anyway, thanks again.
Best Regards
No problem. Glad I could help.
dont mean to intrude, but i needed a production cingular rom for my g4 version 2.25 can anyone help?
Wm os 5.1.195, rom 2.26.10.2wwe
TMO has moved things around, but you can find instructions and download links for Microsoft Windows Mobile Version 5.0 OS 5.1.195,
and ROM version 2.26.10.2WWE on their US website at
http://support.t-mobile.com/doc/tm23294.xml?&A2L.SERVICE=UpdateSoftware.
Fasten seat belts and prepare to catch WM6 for HTC Herald
tupisdin said:
Fasten seat belts and prepare to catch WM6 for HTC Herald
Click to expand...
Click to collapse
Sure?The link?......
Please wait.
Here is Official(not hand made) Herald WM6 OS dump!!!
Please do not ask me about anything!
I will not comment anything.
http://uploaded.de/?id=zi6wyz - ROM Ver 4.12
http://uploaded.de/?id=3duxyy - flasher for SuperCID devices only
All in you hands!
Enjoy!
Why it for Artenis? = Herald? I dont belive this ones for Herald, be careful to flash.....
Also Thanks for sharing!
Sorry mistyped!
Is this WWE?
Please do not ask me about anything!
I will not comment anything.
Click to expand...
Click to collapse
Sorry I had to ask this...
Sure WWE!!!
Thanks very much for this.
I have no idea how to use this at the moment. So I will wait until the experts come online before I try flashing.
tupisdin said:
Here is Official(not hand made) Herald WM6 OS dump!!!
Please do not ask me about anything!
I will not comment anything.
http://uploaded.de/?id=zi6wyz - ROM Ver 4.12
http://uploaded.de/?id=3duxyy - flasher for SuperCID devices only
All in you hands!
Enjoy!
Click to expand...
Click to collapse
Tried flashing with the provided files, but still same old issue, RUU stops @ 2% of update... doesn't seem to be superCID...
too bad, we'll wait for HTC...
Well since my device bricked anyway i'll mess around somewhat, let's see what this ROM's got thank you for sharing But too bad this does not flash SuperCID on the device, but requires it i'll wait for the official ROM
I bit the bullet and tried but got this error:
Error 294 INVALID VENDER ID
I guess my HTC P4350 is not CID unlocked.
tupisdin said:
Here is Official(not hand made) Herald WM6 OS dump!!!
http://uploaded.de/?id=3duxyy - flasher for SuperCID devices only
All in you hands!
Enjoy!
Click to expand...
Click to collapse
Thank you. is this file complete ROM update or just OS dump prepared for flashing to SuperCID device?
Hi all,
I have just flashed this new OS from the official rom (what people call, HERA_WM6_FLASHER.rar) on my P4350. This rom is for German device, like Wing's OS. There is not big difference, this is really for Herald. The mistake is the same, there are some wrong letters on the keyboard.
You can flash the OS with Aserg' way easily. Your device does not need to be unlocked.
IT RUNS LIKE HELL! )
MS Office is included. You can take a look at the below pics.
How did you flash? did you rename the os.nb0 to os.nb and followed azergs instructions as normal?
wondering about same thing..
Well, I tried replacing the os.nb file in asergs wm6, it gave a error, but when i did a hard reset, it worked just fine btw I renamed the os.nb0 to os.nb,and then replaced asergs os.nb....
im now testing out thecabs extracted from the touch and up to now its great
OK I could extract the files of the os.nb both the XIP sections and the IMGFS.
I used the Hermes NBH tools for that (see http://wiki.xda-developers.com/index.php?pagename=Hermes_NBH).
My problem si that rdmshflsh.pl does only extract files, not modules...
I'm trying to rebuild a ROM for the Wizard with this one, but if I don't get any modules, it is ok to have only files in the IMGFS?
-eluth.
itje said:
Well, I tried replacing the os.nb file in asergs wm6, it gave a error, but when i did a hard reset, it worked just fine btw I renamed the os.nb0 to os.nb,and then replaced asergs os.nb....
im now testing out thecabs extracted from the touch and up to now its great
Click to expand...
Click to collapse
i use this way to flash my c800
and ... unlucky it's bricked
i can go into the bootloader but i can't find one RUU-ROM for my c800
i try a lot of ROMS but they take a message"XXXXXXXXX ID" CID locking
my IPL/SPL all 1.09.0001
anybody knows how to unbirck it with another way?
eluth said:
OK I could extract the files of the os.nb both the XIP sections and the IMGFS.
I used the Hermes NBH tools for that (see http://wiki.xda-developers.com/index.php?pagename=Hermes_NBH).
My problem si that rdmshflsh.pl does only extract files, not modules...
I'm trying to rebuild a ROM for the Wizard with this one, but if I don't get any modules, it is ok to have only files in the IMGFS?
-eluth.
Click to expand...
Click to collapse
Eluth, use scoter's kitchen to extract the modules. BTW, PM me if you need help with this. I've already got the OEM side of a T-Mobile wing running on my device. Runs like hell .
Hi all, I've created HTC Jade CustomRUU patched to perform a 'task 32' instead of a 'task 28' after flashing an .nbh, so it will not format your device if you just flash a radio or a splash screen.
How to: Drop the .nbh file of your choice in the same folder as CustomRUU and start flashing.
Everyone NOTE:
AVG and other anitvirus's usually detect a virus in CustomRUU.exe, it's false error. Disable your antivirus while downloading and flashing.
Have fun.
@udK
should I understand that radio is possible to flash in? Pls to provide me a link with the radio topic.
thnx much
How's about the change and I know how to install because of I just buy it?
I don't know every things.
Why I can't to uprom from it? It show file can't open between uprom.
Hi and thanks for your great work.
What I would like to know, is if I can use this with my HTC Touch3G please? I know it is code named the HTC Jade, but is that what yr RUU is for?
If I can, do you know where the latest Touch3G roms can be found?
aussie
aussie_boi said:
Hi and thanks for your great work.
What I would like to know, is if I can use this with my HTC Touch3G please? I know it is code named the HTC Jade, but is that what yr RUU is for?
If I can, do you know where the latest Touch3G roms can be found?
aussie
Click to expand...
Click to collapse
Yes it will, but you can only flash stuff if you have HardSPL installed.
So until it's released this app isn't much use to you
"What is is used for...?" It flashes the image from your PC to your device. There is a RUU with all ROM updates (including the carrier ones), this is is patched to stop you wiping your data if you are just flashing a Splash screen or Radio.
Dave
Big Thank you Dave. I will be patient then and say a few prayers
aussie
re
can i flash rus rom whis this tools?
(have eng firmware on device)
streech said:
can i flash rus rom whis this tools?
(have eng firmware on device)
Click to expand...
Click to collapse
No, you have to have Hard SPL first.
Ta
Dave
Singapore machine
Just have a question....actually how to flash singapore machine?
waiwai888 said:
Just have a question....actually how to flash singapore machine?
Click to expand...
Click to collapse
Put Hard SPL on the phone (see the stickies), then download a ROM and flash the by running the RUU executable (it should be included with the ROM - or download and use this one).
Ta
Dave
Hi
I have installed HardSPL (and confirmed) and downloaded the Radio ROM http://forum.xda-developers.com/showthread.php?t=496737
When I run the CustomRUU.exe my device resets to boot mode with rainbow screen, changes to the grey screen with progress bar and USB at bottom, but then after short while it fails with connection error. Have tried on 3 different desktops with Vista/XP but same problem.
I have downloaded the CustomRUU.exe from here and tried, but same result.
Any ideas?
Just a quick one... Is this CustomRUU exactly the same as the one included in the Jade Kitchen?
If so, then I just drop the .NBH file (radio or splash screen) in the same folder and run CustomRUU, right?
TIA!
izzyzc said:
Just a quick one... Is this CustomRUU exactly the same as the one included in the Jade Kitchen?
If so, then I just drop the .NBH file (radio or splash screen) in the same folder and run CustomRUU, right?
TIA!
Click to expand...
Click to collapse
Yep
Ta
Dave
After installing HardSPL v41 and dropping the .nbh file into the same folder as CustomRUU, the device reboots and shows tricolor
My Jade boot into tricolor screen that says
Jade100 64M
SPL-1.40.0000
MicroP-Jade (LED) v5
but get stuck in the a grey screen at 0%
why does it get stuck 0% in the flashing screen?
Curtom RUU
FYI, I found a trojan on this file...
debrahimi said:
FYI, I found a trojan on this file...
Click to expand...
Click to collapse
It will be a false positive. Many of the RUU programs have the same problems - I have written two wrappers now for the Blackstone and Topaz to remove the AV warnings. I'll see if I can knock together a Jade one.
Dave
i wonder why I cant flash customRUU on my jade
Alphas said:
i wonder why I cant flash customRUU on my jade
Click to expand...
Click to collapse
Do you have Hard SPL??
yes of course, no matter how hard i tried, hardSPL doesnt get installed in the jade.
"...for non comercial purpose, please discuss with oli blah blah blah.." Why would I wanna discuss with him for something that doesnt flash my bootloader?
I take no responsability in any damage on your device. If you're not sure what you're doing, take time to learn some basics from wiki.
This is the process to restore your Rhodium (TP2) back to the stock ROM and SPL. This should be enough for you to warranty return your device.
I have "borrowed" all of the examples from various sources on xda. Many thanks must goto jcespi2005 and JugglerLKR who created the guide and packages for the Raphael from which the majority of this is taken. The SPL "relock" procedure was taken from the Hard SPL thread. Credit to cmonex .
Prerequisites
The Rhodium Kitchen version 0.1 (Open the Zip File and read the password from the !!!readmefirst!!!.txt)
WinRAR or 7zip
RhodiumSPLRelocker_079SPL.zip
nbImg v1.1
Warning
avast! home detects buildOS as a virus, I've personally used it on my machine with AV off, and am not infected, but it's up to you.
Overview
You must follow these instructions in the order given. Once you have the Stock SPL you cannot flash any ROM's except the ones that are signed by HTC. For that reason you must restore the ROM first, then the SPL.
Step 1 - Get your Orginal ROM.
If you can find your Carrier's / Supplier's ROM on this wiki page or on their website. Please jump ahead to Step 4 - Flashing back to Shipped Stock ROM.
If you cannot find your ROM on the wiki then download this ROM : RUU_Rhodium_HTC_Europe_1.19.401.0_Radio_Rhodium_3.44.25.27_Signed_Ship.exe and proceed to Step 2 - Dumping your phones ROM.
Step 2 - Dumping your phones ROM
First you need to Dump the ROM from your Phone. Follow the instructions in this thread [TUT] Dumping an Rhodium ROM / SPL to obtain 4 *.raw files.
N.B: Although it might seem obvious to senior members, you must dump the ROM from your device before you flash it. If you have flashed another ROM to your device, then your orginal stock ROM is lost. You have 2 options, wait and see if your carrier will release one, or beg someone else with the same device to dump their ROM and share the *.raw files.
Step 3 - Reconstructing the ROM
-3.1: Extract the Kitchen to a Folder on the root of your PC (C:\, D:\, etc).
-3.2: Open the RUU_Rhodium_HTC_Europe_1.19.401.0_Radio_Rhodium_3.44.25.27_Signed_Ship.exe file with WinRAR or 7Zip and extract the ruu_signed.nbh file and place it in the BaseROM folder of the Kitchen.
-3.3: Place the Part01.raw (XIP) and Part02.RAW (IMGFS) in the BaseROM folder of the Kitchen.
-3.4: Run RhodiumKitchen.cmd in the Kitchen.
-3.5: Enter the following options into the Kitchen:
-3.6: e, b (for Dumped ROM). Press [Space] once complete.
-3.7: c, a (for Cooking a ROM).
-3.8: Press the "Play" button in BuildOS and wait for it to complete.
-3.9: Close BuildOS, Close PagePool Changer and Press [Space] to goto the main menu.
-3.10: You will now have a Flashable NBH file. Press f to Flash.
Now goto Step 5 - Removing Security Unlock
Step 4 - Flashing back to Shipped Stock ROM
If you were lucky enough to find a shipped ROM on the wiki or your carrier's / supplier's website, then just run the "ship exe" and follow the on screen instructions.
Step 5 - Removing Security Unlock
If you have purchased the SIM/CID/Security unlocker by Olipro, you can re-lock your device using the following tool : http://hpcmonex.net/htc/secrelock.zip
Step 6 - Restoring the Splash Screen
This is only needed if you couldn't find your Shipped Exe. If you have your Shipped Exe, you get the splash with it.
You're best creating a seperate folder out side the kitchen for this.
-6.1: Find a shipped exe from another WVGA device (HD or TD2).
-6.2: Extract the ruu_signed.nbh from the Shipped Exe using WinRAR or 7Zip.
-6.3: Use NBH Extract (in the Kitchen\Tools Folder) on ruu_signed.nbh
-6.4: Delete all files, except 01_MainSplash.nb.
-6.5: Use nbImg.exe as follows: nbimg.exe -F 01_MainSplash.nb -w 480 -h 800
-6.6: Delete 01_MainSplash.nb.
-6.7: Use nbImg.exe as follows: nbimg.exe -F 01_MainSplash.nb.bmp
-6.8: Use HTCRT in the Kitchen\Tools to make a NBH file from the 01_MainSplash.nb.bmp.nb file.
-6.9: Put the new NBH file and copy RhodiumCustomRUU from Kitchen\Tools into an empty Folder.
-6.10: Run the RhodiumCustomRUU.exe to Flash the Splash.
Step 7 - Flashing back to Stock SPL
-7.1: Ensure you already flashed stock ROM and Radio, because stock SPL flash is always the last step before sending the device in.
-7.2: Extract the relocker zip and run the EXE on your PC.
-7.3: If you wish to replace RUU_Signed.NBH that got extracted, feel free to do so, but not necessary (this Hard-SPL will only allow overwrite with a SPL signed by our custom cert). The included one is the 0.79.0000 stock SPL.
-7.4: Flash the Stock SPL
-7.5: Verify if it flashed by checking version in bootloader screen, it should say 0.79.0000, not 0.85.OliNex.
Credits:
-jcespi2005 and JugglerLKR for the Kaiser and Raph Kitchens
-Olipro and cmonex for Hard SPL and Security Unlocking
-pof for nbImg
-Everyone in the Readme.
Reserved
(P.S. I've been writing this in another forum for a few days, hence the Thread Date of the 15th - so this is a bump )
Dave
Did the same thing
Used the Ralphael Kitchen, changed the settings to Rhodium added some settings for Rhodium. used a signed Tmobile US Rom.
Nice Tutorial
Sorry, Dumb Question...
-MOD EDIT: Removed Full Quote
I have found my stock ROM, so I can continue with flashing back to stock, but where do I find the stock SPL?
D_monie3 said:
-MOD EDIT: Removed Full Quote
I have found my stock ROM, so I can continue with flashing back to stock, but where do I find the stock SPL?
Click to expand...
Click to collapse
It's the RhodiumSPLRelocker in the Prerequisites or download it from the Hard SPL thread.
Ta
Dave
First, thanks for this. I write a fair amount of documentation of my work as a network admin so I know how time consuming this is.
cdguider has been kind enough to dump and reconstruct the TMoUS ROM so I don't actually need to do this (although I may just for the exercise) but I do want to start learning how to modify this ROM to suit my own needs. Is there a guide up that will get us newbies started on using the kitchen? Hopefully one that explains in detail what each of the kitchen tools are and what they do as well as how the Rhodium ROM is constructed. I prefer to understand what I am doing versus following recipe steps. For example, My Hermes ROM was partitioned into the ROM and an extended ROM where carriers could put their installers. Does the Rhodium have an ExtROM?
OK, back to the search tool.
S
sleonard said:
First, thanks for this. I write a fair amount of documentation of my work as a network admin so I know how time consuming this is.
cdguider has been kind enough to dump and reconstruct the TMoUS ROM so I don't actually need to do this (although I may just for the exercise) but I do want to start learning how to modify this ROM to suit my own needs. Is there a guide up that will get us newbies started on using the kitchen? Hopefully one that explains in detail what each of the kitchen tools are and what they do as well as how the Rhodium ROM is constructed. I prefer to understand what I am doing versus following recipe steps. For example, My Hermes ROM was partitioned into the ROM and an extended ROM where carriers could put their installers. Does the Rhodium have an ExtROM?
OK, back to the search tool.
S
Click to expand...
Click to collapse
No it doesn't.
For help with this Kitchen, see _Alex_'s cooking guides on the wiki for the Kaiser. That's where I started reading and then I just kept going, download kitchens published by other chefs and see how they put stuff together. There are two main types buildOS (like this one) and PRB that uses bepe's platform rebuilder - ervius's visual kitchen is based on it.
Thanks
Dave
i reconstructed the uk orange stk rom all ok very good guide thank you!
i had to do this because i lots the hard reset it just flashes up no immage then back to boot loader i though stock rom would resolve this i rebooted it and still have no hard reset still says no immage boo boo whats going on is it due to the ruu i am using i thried the rhodium one and the v1.1 one what ever it is i also tried dave's wrapper and a kaiser on out the kitchen tools all same results so i guess not any ideas ppl!?
matttytn2 said:
i reconstructed the uk orange stk rom all ok very good guide thank you!
i had to do this because i lots the hard reset it just flashes up no immage then back to boot loader i though stock rom would resolve this i rebooted it and still have no hard reset still says no immage boo boo whats going on is it due to the ruu i am using i thried the rhodium one and the v1.1 one what ever it is i also tried dave's wrapper and a kaiser on out the kitchen tools all same results so i guess not any ideas ppl!?
Click to expand...
Click to collapse
So you are stuck in the bootloader?
What does it say in the bootloader?
Ta
Dave
Sorted it i am such a fool i was doing the wrong button combo!!!!!!
This is fantastic i am now going to have a play at cooking up my own i know i can do this now i will get my head down and work this stuff out i mite have my first rom by xmas
question about step 3.9
"Close BuildOS, Close PagePool Changer and Press [Space] to goto the ."
how can i close PagePool Changer ? it doesnt work.....
and ,which "main menu" i can goto?
leeneo said:
question about step 3.9
"Close BuildOS, Close PagePool Changer and Press [Space] to goto the ."
how can i close PagePool Changer ? it doesnt work.....
and ,which "main menu" i can goto?
Click to expand...
Click to collapse
Just click the [X] in the top right.
Pressing space will take you to the first set of options that the batch file offered you.
Thanks
Dave
leeneo said:
:12
:12.PagePool.Changer.bat
tools\xvi32\xvi32.exe RUU_signed.nbh
GOTO :EOFQUOTE]
this code in RhodiumKitchen.CMD
but , i cant find PagePool.Changer.bat ........
Click to expand...
Click to collapse
leeneo said:
leeneo said:
:12
:12.PagePool.Changer.bat
tools\xvi32\xvi32.exe RUU_signed.nbh
GOTO :EOFQUOTE]
this code in RhodiumKitchen.CMD
but , i cant find PagePool.Changer.bat ........
Click to expand...
Click to collapse
That's a label in the batch file .
Search for it in the RhodiumKitchen.CMD and see what's called from there.
P.S. I don't have this kitchen on this computer so a lot of guess work and memory on my part.
Dave
Click to expand...
Click to collapse
DaveShaw said:
leeneo said:
That's a label in the batch file .
Search for it in the RhodiumKitchen.CMD and see what's called from there.
P.S. I don't have this kitchen on this computer so a lot of guess work and memory on my part.
Dave
Click to expand...
Click to collapse
ok , i see ..
you kind-hearted ! thx
Click to expand...
Click to collapse
yea thanks for the thread dave, When i use these tools to do up my own splash it chops off at the bottom... is there a patcher out yet to fix this?
thx for the tutorial , how can i take new xip/sys and replace the existing?and how can i remove and add prgorams?
joshkoss said:
yea thanks for the thread dave, When i use these tools to do up my own splash it chops off at the bottom... is there a patcher out yet to fix this?
Click to expand...
Click to collapse
Yes, but I can't recall where I saw it . It's not for the TP2 though, maybe HD or TP.
saymyname said:
thx for the tutorial , how can i take new xip/sys and replace the existing?and how can i remove and add prgorams?
Click to expand...
Click to collapse
Porting isn't simple, have a look for some tutorials on using BuildOS and porting.
Adding and removing programs, to add, just create OEM packages, to remove, just remove them.
Have a look at _Alex_'s cooking tutorials on the Kaiser Wiki.
Dave
DaveShaw said:
Yes, but I can't recall where I saw it . It's not for the TP2 though, maybe HD or TP.
Dave
Click to expand...
Click to collapse
yep the tp one has no affect on our splash unfortunatly. i've already posted in theyre thread askign they make it compatible. but just wonderin if you came across anything about this is in your many travels.
Question
Hi everyone ...
First of all Thanks alot for this Tut Dave awesome work.
I dumped my Stock Rom from a unbranded O2 TP2 and rebuild it.
For Cooking i used the signed_ruu from RUU_Rhodium_HTC_Europe_1.19.401.0_Radio_Rhodium_3. 44.25.27_Signed_Ship.exe
It did everything like described and i've got a
signed_ruu.nbh (1.19.207.1) newest o2 Stock Rom.
Should be fine right?
Do i also need to do Step 6 so creating a splash screen?
If anyone needs this rom drop me a message ...