Database Develop

a question about radios

is there anyway to "shelltools" flash my radio rom? I've been missing a lot of calls lately and it really is becoming inconvenient. I havent unlocked my phone, but i am running wm6 using shelltools (mfrazzz's stuff) and i was wondering do i even need to have my phone unlocked to flash my radio? i dont want to lose my warranty so thats why this matters to me. Any ideas guys?

You may get the official (in your case, T-Mobile, I guess) ROM to flash your phone with the full set of WM5 ROM (e.g. IPL, SPL, OS and Radio). As you are using the official ROM, you do not have to CID-unlock your phone prior flashing this official ROM. After that, you may then use shelltool to update/upgrade/flash the WM6 in, while the radio is untouched (e.g. still using the one you've flashed with the official ROM).

i thin i have done what you said already. Before i flashed mfrazzz's wm6 rom i flashed the latest tmobile rom, then i proceeded to flash the wm6 rom. I didnt use shelltools to flash the official tmobile rom obviosuly, but i did use shelltools to flash mrazzz's wm6 rom.
these are my things from what i'm using now:
ipl 2.26
spl 2.26
gsm 02.25.11
os 2.18.0.0

Flash the t-mobile uk radio rom 2.19.11.. that'll work for u.

ur OS is wrong if ur running wm6...

2.18 is Crossbow Reloaded... or Faria's..

Madcap180 said:
Flash the t-mobile uk radio rom 2.19.11.. that'll work for u.
Click to expand...
Click to collapse
can i just flash that right now without being unlocked? i'm in boston, does that matter? lol

Madcap180 said:
2.18 is Crossbow Reloaded... or Faria's..
Click to expand...
Click to collapse
oh, my bad then lol.
and yes u can change ur radio without being unlocked

ok thanks guys for all the help, but i still have a couple small questions
first, in this post http://forum.xda-developers.com/showthread.php?t=253609&page=4
(post #34) he says that if you dont cid unlock before applying the radio rom you will brick the phone.
next im looking for that uk rom, but i really cant find it, can anyone point me in the right place? and even though im in the US it will still work right?
thank you guys so much! i really aappreciate it

There you go
jawnsixteen said:
ok thanks guys for all the help, but i still have a couple small questions
first, in this post http://forum.xda-developers.com/showthread.php?t=253609&page=4
(post #34) he says that if you dont cid unlock before applying the radio rom you will brick the phone.
next im looking for that uk rom, but i really cant find it, can anyone point me in the right place? and even though im in the US it will still work right?
thank you guys so much! i really aappreciate it
Click to expand...
Click to collapse
I have flashed my RADIO ONLY several times with no consequences for my CID LOCKED G4 Wizard, here´s the link for the RADIO ONLY
ftp://xda:[email protected]_Thread/T-Mobile-UK_2.19.11_Radio_Only.zip

You have flashed RADIO only on you G4? HOW? I am having the following problem:
I had to flash a T-Mobile German ROM to use the shelltool for the latest WM6 ROM, it worked but unforunately I have got Radio 2.69 and IPL 3.08.XXX1. (from the latest official MDA Vario ROM flash before)
After the Hardreset everything went fine - I've got WM6, but after i had changed the Clock settings and restarted my device i simply have NO SIGNAL anymore. I am currently in australia maybe thats the reason???
I tried to install the offical T-Mobile AKU 2.0, but the RUU shows me error 296 as I have installed a later ROM AKU3.3 bevor my WM6 flash.
Which tools have y used? And how is the procedure?
Cheers!!!
irm

4irm said:
You have flashed RADIO only on you G4? HOW? I am having the following problem:
I had to flash a T-Mobile German ROM to use the shelltool for the latest WM6 ROM, it worked but unforunately I have got Radio 2.69 and IPL 3.08.XXX1. (from the latest official MDA Vario ROM flash before)
After the Hardreset everything went fine - I've got WM6, but after i had changed the Clock settings and restarted my device i simply have NO SIGNAL anymore. I am currently in australia maybe thats the reason???
I tried to install the offical T-Mobile AKU 2.0, but the RUU shows me error 296 as I have installed a later ROM AKU3.3 bevor my WM6 flash.
Which tools have y used? And how is the procedure?
Cheers!!!
irm
Click to expand...
Click to collapse
No, we can´t flash a ROM with bootloader other than the one you have if you have a G4 CID locked device. Unless you use a RUU with no ID (see next paragraph) and the nb.nkf file lacks of IPL/SPL, such is the case of the Wizard Love which I use before to flash any other ROM with the Shell Tool.
Read post #2 of this thread
http://forum.xda-developers.com/showthread.php?t=310954
Read carefully where talks about Splash Screens and Splash Only RUU for G4, same procedure for splash screen applies to RADIO. This doesn´t work for OS, for OS you have to use Shell Tool.
Good luck!

radio rom problem

hi...
i am a little noob when it comes to rom upgrading. so, i apologise if this is a stupid question. i flashed my wizard with wizard love rom. the ipl and spl both show 1.01 and os 2.26.10.2..but, no gsm.also, my phone doesn't catch signals.now, if i need to flash a radio rom, which radio rom should i flash, and is there any risk of bricking my device ??
thanks..
puja

There's very little risk (I'm definitely not going to say there's none because you always take some risk when flashing) with flashing a radio ROM. I kind of curious though, most people only flash the wizard love ROM so they can CID unlock before going on to flashing other ROM's such as a WM6 version. Are you planning on keeping the wizard love ROM as your OS? Which radio ROM you decide to flash kind of depends on where are and what ROM you're using. 2.19.11 seems to be the most popular one to flash though. Check the wizard wiki if you need to download it.

Basically flasing Radio ROM will not brick the device, and it also does not require CID unlocking.
Beside 2.19.11, 2.47.11 and 2.69.11 Radio ROM are also popular.
If you have unlocked your device after downgrading IPL and SPL, just get a 3.08 IPL/SPL upgrade package and you will get all IPL/SPL/Radio ROM upgraded to the most current version.
p.s. You now have IPL/SPL 1.01 that is too old and should be upgraded (Instead you MUST upgrade to at least 2.xx if you plan to use WM6)

i was earlier having ipl n spl 2.xx..but i wanted to unlock my device.so, i downgraded to button's 1.05 rom..but i couldn't unlock it (See my post in the topic 'The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards'), after which i decided to simply flash the love rom...

What by mean of "couldn't unlock"?
What error is shown from lokiwiz/aWizard?
p.s. Unlocking require ActiveSync connection

edit. sorry

starkwong said:
What by mean of "couldn't unlock"?
What error is shown from lokiwiz/aWizard?
p.s. Unlocking require ActiveSync connection
Click to expand...
Click to collapse
when i run 'lokiwiz.bat' as instructed, it says 'your phone is now unlocked', but my device doesn't reboot..u may read my post in ''The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards"..is there any way to check if my phone is unlocked or not ???

Search for and download wizard service tool. It has a button on it that you can press and it will tell you if you're unlocked or not.

I'll save you the searching since about 10 seconds after I wrote that last post I saw the wizard service tool thread. It's here - http://forum.xda-developers.com/showthread.php?t=295038

Update JUST the radio

Hi all,
I recently updated to the official AT&T ROM on my 750. It updated the radio to 1.54.00.00 but I've been having lost signal issues in places where I used to get full signal. After looking through the forums, I've downloaded 1.54.07.00 to give that a shot. Only problem is, I'm not sure how to update just the radio.
Can anyone point me to some instructions on updating the radio?
Thanks in advance,
Chris

Check out my post http://forum.xda-developers.com/showthread.php?t=348271 as I figured it out.

N8NU,
Are you using Olipro's SPL bootloader?
I'm not using his bootloader, and was unable to flash the radio following your instructions. I've been doing some searching and haven't found how to update just the radio if you're not running a custom bootloader.
I'm assuming it's possible if Palm has a Recovery Tool that changes radio fw, although I'm not sure of it's inner workings.
Has anyone else had success flashing just the radio fw? I hate to be negative, but I'm having some issues with the official ATT WM6 ROM 2.25 with radio fw 1.54.27.00

Yes, I went through the unlocking process in the sticky. In the end however the radio was kept at v 1.2 something. So I added radio 1.5 and it works.

questions for updating radio

xda community,
sorry if it dosent belong here but if anything move it or lock it but really need help....
i received a replacement phone from tmobile with the radio 2.22.19.261 and that is the radio update we need...well i bricked 1 phone because i tried doing this and didnt notice that it had already the radio......what im concerned about is if i should skip the update radio step and just install the spl???? please some feedback would be greatly appreciated and once again sorry if it dosent belong here.
plz and thank you

the 2.22.26I is the radio that is needed to flash the 1.33.2005 spl. also make sure phone is a pvt instead of dvt by booting the phone into bootloader (camera and power) and find out on that screen. if you have both of those then the 1.33.2005 *should* (being the keyword) flash without problems.

it is a PVT board so you are suggesting i just flash the spl since the radio already came with the phone?

djcookiedj said:
it is a PVT board so you are suggesting i just flash the spl since the radio already came with the phone?
Click to expand...
Click to collapse
if you want to be on the really safe side, then you should flash the radio first

i tried it with another phone i had that was shipped with the same radio and then it got bricked......thats my fear of bricking this phone

djcookiedj said:
i tried it with another phone i had that was shipped with the same radio and then it got bricked......thats my fear of bricking this phone
Click to expand...
Click to collapse
if you have any doubts then if i was you, i would flash the radio first just to make sure.

djcookiedj said:
i tried it with another phone i had that was shipped with the same radio and then it got bricked......thats my fear of bricking this phone
Click to expand...
Click to collapse
You should flash the Radio haykuro posted. I did just to be safe. I believe i saw one person brick even though he had the 26I radio, but i dont think he knew what he was doing.
if your gonna flash the .2005 spl, you might as well be extra safe and flash the radio. its only a few minutes more

quick update :
i went ahead and prayed that this went well.....since my g1 was pre-shipped with the newest RADIO version in an older g1 that had the newest radio i tried applying the Radio update and it bricked.....so this time i went ahead and (thanxz for the feedback) just flashed the SPL and VOILA !!! now i am testing the hero ROMs and BLUR rom.....thanks guys

djcookiedj said:
quick update :
i went ahead and prayed that this went well.....since my g1 was pre-shipped with the newest RADIO version in an older g1 that had the newest radio i tried applying the Radio update and it bricked.....so this time i went ahead and (thanxz for the feedback) just flashed the SPL and VOILA !!! now i am testing the hero ROMs and BLUR rom.....thanks guys
Click to expand...
Click to collapse
your welcome, glad that your phone is still booting and flashing strong

update radio
I wanted to update the radio pls send the link or step by step how to upgrade radio cause i try in the forum and i found a difference methode .... there's nbh, ota,... i didn't understand ... pls make a simple link and how to
thanks

Flashing Back to Stock ROM

can anyone give me a step by step on how to flash my ROM back to STOCK?

if you want it for warranty reasons then you will need to flash the SPL also to stock. you can just download the latest ROM from HTC website and flash it. it will give you the stock ROM on the existing SPL.

End of the post http://forum.xda-developers.com/showpost.php?p=2710548&postcount=1.
Remember you will also need to go back to stock spl if for warranty purposes.

i have another problem, when in bootloader it wont change from serial to usb but was a week ago

7896zx said:
i have another problem, when in bootloader it wont change from serial to usb but was a week ago
Click to expand...
Click to collapse
nevermind what i said there, for sum reason it works again now

I've kinda got thesame question. I flashed a stock rom (latest EU rom from HTC site), then stock SPL (1.14) and then the stock rom again. Is this enough to be able to claim warranty without HTC finding out about custom roms/boatloaders?
Thanks

accountabc said:
I've kinda got thesame question. I flashed a stock rom (latest EU rom from HTC site), then stock SPL (1.14) and then the stock rom again. Is this enough to be able to claim warranty without HTC finding out about custom roms/boatloaders?
Thanks
Click to expand...
Click to collapse
That depends. What was your original rom and spl? Are you entitled (via location) to use the new EU rom, eg if you live in America then this may not be acceptable to HTC.
When you boot up the new rom, are the screen colours ok as this will tell you if you have the right spl for your rom? If you have the latest EU rom, I doubt that 1.14 spl would be the right one, but it could be I guess. With the stock rom, you should also get the stock radio. So provided you have the stock rom available to your area, with the correct matching spl and the radio, there is no way to tell of your exploits

Thanks for your reply
The problem is that the screen of my device won't turn on anymore (Device powers on, I can connect with activesync, digitizer works fine) so i have no way of checking if I have the right SPL or not...
I also have no idea what my stock rom/spl/radio version was.. I live in the Netherlands, and through the official HTC site i flashed the latest rom, which included a radio (a radio version was part of the filename). What I'm trying to find out is:
Could 1.14 have been my stock SPL, or was that version never used on any Dutch Blackstone?
If the spl doesn't match the rom (wrong colours) that isn't much of a problem; I can tell them I tried to update my rom because I thought maybe my screen would work again after I installed the latest ROM... But if I have a SPL that was never even used I don't think they will buy that

According to the wiki there are 2 Dutch roms - one would require a 1.14.0000 spl and the other a 1.54.0000 spl. So I guess either of those would do.
When you flashed the rom from the website, where you still using hspl or uspl? Depending on the rom you flashed you will need to flash the matching spl. Do you have the full notation/naming of the rom you flashed. This should give an indication of which spl you will need.

As much as I appreciate ClydeB1 for assisting you, I fail to see a reason for this thread. A thread already exists for flashing advice, i.e. the dummies guide. Also the HardSPL thread exists and has advice on how to flash back to stock. So depending on your query post in either of these.
The initial query and reason this thread was created has been answered, so no need for this thread to remain open. Thread closed