hi.
i have received requests from many guys, to make enable BT DUN
profiles on hw6900.
this means, connect internet via BT through cell phone like Nokia phone.
You can get connect 3G or CDMAx1 which hw6900 can not connect them.
now all english interface
PLS try guys.
--------------------------------
if you own hw6500 with pocket pc200se.
go to this link.
http://asukal.net/blog/?p=366
or
http://asukal.seesaa.net/article/5273848.html
Will this file work on the HP iPAQ 5915 running WM5.0? I want to do BT DUN from the 5915 using the hw6925 as the cellular modem.
Thanks,
Rick
rickrcomm said:
Will this file work on the HP iPAQ 5915 running WM5.0? I want to do BT DUN from the 5915 using the hw6925 as the cellular modem.
Thanks,
Rick
Click to expand...
Click to collapse
hi, 5915 has widcomm BT stuck?
If so, pls check the Version of BT.
Go to BT setting, About---and then tap Advance.
You can see the Version of Stuck.
If that version was 1.7.16700 or near to this,
Hopefully it will work.
But i dont have that device, so couldnt test on that.
PLS test as on your own risk.
(If it will not work, you have to hardreset to recover,
pls make back up your date in advance)
Hi,
Thanks for this BT DUN for the hw6900. I just installed it on my hw6945 and works great. But I can no longer use ActiveSync. It seems like the install affected the communication port for the USB. I continue to receive an error. "USB device not recognized" Is there a work around for this. When I hard reset it works, but when I re-install the Blue tooth dial up client it stops working. Thanks in Advance.
hi
i didnt face to that problem cose of this patch on my device.
But i often see that problem on my another devices
in that case, pls try following way
@Start Menu--Setting--Connection
@Tap "ActiveSync Mode" icon
@Swtich to RNDIS Sync Mode or USB Serial Sync Mode
(better try both mode, and then you can find which mode can work on your device)
Thank you, that worked. I can know access the internet using my hw6945 with my Razr V3xx as the dial-up modem.
china99boy said:
Thank you, that worked. I can know access the internet using my hw6945 with my Razr V3xx as the dial-up modem.
Click to expand...
Click to collapse
Ok, pls enjoy that!
Hi, this may be off the topic, but I installed Mobem Mphone on my Hw6945 pda so I could send and receive SMS via the bluetooth dun. The installation went well. The problem is, it does not give me the option to select Bluetooth in the drop down menu. I could only select Serial or Infrared. Instructions says that I should select Bluetooth and then select port BTC1. Does the Bt hack not provide this option or is there something else I should do. If I select Serial I am able to select COM6 which is the outgoing BT serial port on the PDA, but I get an error that no bluetooth serial port could be found on the razr v3xx. So I assume I need to have the Bluetooth BTC1 available before I can do anything. This website shows what I am trying to get done.
http://www.mobem.com/products/mphone26/qtour/6310/5450_mp_setup.htm
Any advice will be greatfully appreciated. Thanks
I might turn out to be stupid, but I see no point in doing such a thing ? what for ? 6945 has SIM card in it and can connect to internet using GPRS, which is more than enough on such a small screen ? I fail to see the point, please, enlighten me ?
I am may be the stupid one, but I know that the hw6945 has sim card and can connect with the gprs. That also works great. I normally use my Razr V3xx for my primary phone and only use my PDA occassionly. Instead of switching the sim card everytime, I just wanted to retrieve the SMS or surf from the pda via BT using my V3xx. I just tried to do the above with Indovisi SMS and that works great, so I will just use that instead. I loved the features of mPhone better so I was trying to get that working. It probaly doesn't make much sense since the hw6900 can do it all. Thanks for your help anyways.
Related
I tried to search this but the only thing I could find was a thread that walked you through the setup but when I tried it, nothing happened.
Here is what I got:
T-Mobile, T-zones workaround for Edge.
Can I tether my MDA to my laptop via USB cable to use Edge. If so, someone please walk me through it.
Thanks,
M3
I've been trying this too but wasn't very successful. I've tried setting up everything myself from my knowledge, but I guess that wasn't enough.
So I found a program called PDAnet. It is supposed to be an excellent program to do exactly what you're asking- connect GPRS phone to laptop to access internet. Well, I've tried this program but was not successful. For some reason I couldn't get it to work. But do give it a try yourself, it is supposed to be great.
If it works for you, maybe you can share your settings? thanks
I do this all the time, I hate the $9.95 1 day access fee when your in an airport maybe 2 hours if that.
First, ditch the USB cable and link via bluetooth. I only got my USB setup to work once and that after massive messing around. I'm assuming you have bluetooth on your lap top, I've a Dell so your set up may be somewhat different than mine.
First you want to make sure your BT radio is on, all I have to do is right click on the system tray icon and enable radio. Next bring up the BT settings manager and hit make a new connection. On the Com screen in the wizard make sure it's set to discoverable, there is a link under the settings menu bottom of the screen. If this is the first time you've paired the laptop to the Wizard then you'll need to enter the access code, in my case it is 0000 for both. On my laptop I need to go into the manual connection process otherwise it assumes I want to do a file transfer and not a modem connection. Set the connection to dial up modem, if it asks you for a number to dial it is *99# (Tmobile gprs). Thats pretty much it. The only hitch I've found is that I occasionally need to set the wizard to discoverable.
When I want to connect to the internet at admittedly slow GPRS speeds I bring up the BT manager and hit connect, it finds the Wizard, dials it into the GPRS and that's it, I'm tethered and have internet access. It's slow, kind of like a dsl line but for checking emails it's just fine. I used to have a Sierra Aircard which I could pop my SIM into and that worked great and was stable but the new laptop has an express card slot so the Aircard doesnt fit. If you have the older style port and Cingular or Tmobile you can pick these up cheap on ebay.
xdame said:
I've been trying this too but wasn't very successful. I've tried setting up everything myself from my knowledge, but I guess that wasn't enough.
So I found a program called PDAnet. It is supposed to be an excellent program to do exactly what you're asking- connect GPRS phone to laptop to access internet. Well, I've tried this program but was not successful. For some reason I couldn't get it to work. But do give it a try yourself, it is supposed to be great.
If it works for you, maybe you can share your settings? thanks
Click to expand...
Click to collapse
New! Version 1.72 adds support for GSM/GPRS devices such as T-Mobile MDA or Cingular 8125! It also supports Vista and Bluetooth/InfraRed connection through ActiveSync.
^thats from their website. Have you tried it lately?
I'm about to install it myself and try. Will post how it goes.
Hey everyone I am really curious about how I need to go about accesing the internet throung the usb connection while my tilt is plugged in. I have read that previous versions of active sync had a feature called pass through which could be enabled / disabled at your choice. However in the current version of active sync this does not seem to be an option.
I basically just want to be able to browse the net on my tilt while I am connected to the pc via my usb cable.
Why because the at home internet connect is way better then the 3g network. This way I can download large files directly to my phone.
I have tried the registry edit as well as other methods. Still can't get the damn thing to work..
I am running the stock tilt rom directly from att. No mods no nothing. Also the version of active sync that I have came directly off the att tilt cd.
Please Help I appreciate your efforts in advance!
I have this workaround ( same situation with my X51V ) that you can try.
import the reg file or add the following key:
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
Most works out of the box ( internet while activesync ... not sure why yours don't ... could be something that you did ??
anyway ... try the reg import and report back
I didn't do anything on mine and it is able to connect to internet through the USB whenever I connect it. WiFi is disable when the USB is connected.
earthman5678 said:
I didn't do anything on mine and it is able to connect to internet through the USB whenever I connect it. WiFi is disable when the USB is connected.
Click to expand...
Click to collapse
when setting up activesync ... the last window allow you to enable WIFI while connected to USB too ( if prefered )
or go into ( File -->> Connection Settings ) and check "allow wireless connection on device while connected to desktop"
yeah tried the reg hack before. didn't change anything for me.
I also messed with the advanced network functionality box under start settings> connections> USB to PC.
No worky for me.
Is there anything else you guys have done on the phone? Should there be any other entries under network management? RIght now I have listed
Media Net
AT&T ISP
My Work Network
MY ISP
If you haven't MOD anything like you've said ... I would suggest a hard reset ... and don't touch that USB to PC setting !!!
things should allow you to surf while activesync right out of the box !
UnicornKaz said:
If you haven't MOD anything like you've said ... I would suggest a hard reset ... and don't touch that USB to PC setting !!!
things should allow you to surf while activesync right out of the box !
Click to expand...
Click to collapse
for real OH Jebus Hard reset. Just great. Well atleast i don't have too much on my phone.
Any other suggestions?
In your PC ACtiveSYnc' connection settings, you will have a drop-down under name "This computer is connected to". Take out Automatic there and choose Internet.
Sometimes ActiveSync will not recognize that your PC has internet. Tell me if this was it in your case.
Regards,
Carty..
Carty said:
In your PC ACtiveSYnc' connection settings, you will have a drop-down under name "This computer is connected to". Take out Automatic there and choose Internet.
Sometimes ActiveSync will not recognize that your PC has internet. Tell me if this was it in your case.
Regards,
Carty..
Click to expand...
Click to collapse
yeah my man did that as well... maybe I will try the hard reset and see what happens
ive been curious about this also. mine just seems to default to my 3g connection...do i have to disable this for it to use the active sync connection?
Nope. When Synced, ActiveSync' net is on first priority!
Regards,
Carty..
I wonder if you have the networks proxy set in your default internet connection and when you connect via as it cant see the proxy nd thus wont allow connection...
interesting i tried out the newest rom on kaiser upgrade section...the att rom. i was gettin the same behavior. i loved the rom but was only bugged by that. i went to a new rom and fixed that problem. something with how att handles activesync cant do the job.
And ATT use a proxy...
unwired4 said:
And ATT use a proxy...
Click to expand...
Click to collapse
i tried the diasable proxy cab flying around...it was no good. I'm using a different rom right now. It only happened to me on that specific rom.
I would have thought you just need to check the connection settings and make sure no proxy is enabled.
regarding the Tilt and the proxy ... you could try out these 2 cabs at this thread ( 1 for disable ... the other is for enable )
look towards the end of the post ..."Sleuth255" had provided the cabs for you Tilt owners to fix the hidden proxy that is involved with AT&T Tilt
http://forum.xda-developers.com/showpost.php?p=1656670&postcount=1
if it works ... holler so that other Tilt owners can benefit !
UnicornKaz said:
regarding the Tilt and the proxy ... you could try out these 2 cabs at this thread ( 1 for disable ... the other is for enable )
look towards the end of the post ..."Sleuth255" had provided the cabs for you Tilt owners to fix the hidden proxy that is involved with AT&T Tilt
http://forum.xda-developers.com/showpost.php?p=1656670&postcount=1
if it works ... holler so that other Tilt owners can benefit !
Click to expand...
Click to collapse
Nice I downloaded the cabs. But before I launched them I took a look at my tilt for another second.
Keep in mind that I just did a hard reset and this is a stock att ship ROM.
Under start> Programs>Tools> There is a icon called proxy manager.
I clicked on diable proxy and did a soft reset. The problem is now fixed. I can browse the net while connected via usb through pass Thru.
Maybe the cabs do not need to be downloaded afterall as att already has them installed but thank you for the lifesaver!
Thanks people!
Hi,
I also used proxy manager to disable the proxy. Now whenever i connect my phone with activesync, it keeps connecting to the phone's GPRS (mediaNet). i look under the connections icon and it shows medianet connected, but not activesync.
anyone know how i can fix this to return to normal? i tried enabling the proxy again, but no luck.
HI,
I think I need the opposite
At work there is a very restrictive proxy that allows pie connections but, for example, does not allow to update the weather in HTC HOME.
There is a WIFI nearby that allows it...
Now, what I would like is to have my device ActiveSync'ed (so contacts, and so on are OK) while using WIFI for ineternet access...
Anyone knows if it is possible and how?
Thanks
hi,
Can someone tell me how to connect to WLAN ?
the connection disconnect every few seconds, why ?
thnx
Maybe you used wrong settings, you are (nearly) out of range or the accesspoint uses a MAC-Filter.
How can i get online on my Laptop
with the help of My Phone At&t Tilt ?
is there a cab for it ? or ?
Please Help
ilordvader said:
How can i get online on my Laptop
with the help of My Phone At&t Tilt ?
is there a cab for it ? or ?
Please Help
Click to expand...
Click to collapse
Use Internet Sharing via USB or Bluetooth if you laptop supports it. Works great. No need for cabs or anything. You may need Active Sync installed on your laptop (can't remember since I have it installed anyway).
ecltech said:
Use Internet Sharing via USB or Bluetooth if you laptop supports it. Works great. No need for cabs or anything. You may need Active Sync installed on your laptop (can't remember since I have it installed anyway).
Click to expand...
Click to collapse
what ecltech said. And YES you need activesync installed or else your pc won't realize your device and ask you to add new hardware. With activesync it updates the usb drivers to recognize that you are connecting your device and sharing its internet.
Haven't tried the Bluetooth way yes so I wouldn't have an answer for that one.
ecltech said:
Use Internet Sharing via USB or Bluetooth if you laptop supports it. Works great. No need for cabs or anything. You may need Active Sync installed on your laptop (can't remember since I have it installed anyway).
Click to expand...
Click to collapse
Thxs ill try it
Bluetooth works fine. When you configure the Bluetooth on your laptop use advance configuration so you can use the WAP setting. Otherwise it defaults to the modem and asks you for dial settings/etc.
ilordvader said:
How can i get online on my Laptop
with the help of My Phone At&t Tilt ?
is there a cab for it ? or ?
Please Help
Click to expand...
Click to collapse
Couldnt do it
Can anyone give me step by step instructions
PLEASE
Can anyone help me with this problem i just bought kaiser yesterday but i notice that i cant be able to receive any file transfer from a bluetooth connection.
However i can be able to beam file through bluetooth connection to another phone.
Can anyone help to solve this problem please?
thanks
Please be more specific, in order to get answers to your question. How your problems shows? Could it be just that other devices can not see your Kaiser, if so, then you have to tick checkbox "Make this device visible to other devices" on bluetooth settings.
--
Mika
As per the last post, your device has to be set to 'Visible' in BT settings and if you want your device 'Open' to receive all beams the uncheck the box in BT settings under 'Security'
There is another setting to check.
Under Start\Settings\Connections there is an icon labelled "Beam". Click this and make sure the box labelled "Allow incoming beams" is ticked. (Not sure about the exact wording but it is the only checkbox on the screen.)
And whilst we're on the subject of ticking boxes....
I'm pretty sure the two boxes under the FTP tab in the bluetooth setting need to be ticked aswell...Could there BE anymore boxes to tick for 1 simple operation?!
Similar Issues
I am having similar issues, but a bit more severe. Kaiser wont see my laptop that has a USB bluetooth dongle. It can see my bluetooth headset just fine. But it refuses to see my desktop and my desktop refuses to see it. Any suggestions
JKO
jack_b_uta said:
I am having similar issues, but a bit more severe. Kaiser wont see my laptop that has a USB bluetooth dongle. It can see my bluetooth headset just fine. But it refuses to see my desktop and my desktop refuses to see it. Any suggestions
JKO
Click to expand...
Click to collapse
This sounds like a problem with your laptop/dongle, if your kaiser is able to see other things...
What rom are you using? I was using alex's rom for a while but he some how removed the ftp tab in the bluetooth settings and I was never able to receive any files. I switched over to sleuth's rom and it fixed all my problems.
kinktao said:
What rom are you using? I was using alex's rom for a while but he some how removed the ftp tab in the bluetooth settings and I was never able to receive any files. I switched over to sleuth's rom and it fixed all my problems.
Click to expand...
Click to collapse
It's the same in Dutty's new ROM. The FTP tab is gone, and now I (and a few other people) can't send/receive via bluetooth.
Technical intervention is required here ...
I'm facing the exact same problem with my TyTn 2, but here are some spacifics that require an expert's opinion...
1. The device sends perfectly...
2. When it comes to recieving, here's the low-down:
-I tried sending a pairing req. from my computer (through my BT dongle) & the phone received the req.
-After the pair, the computer sent & the device received (no problem until now)...
-I tried sending another file (from my Nokia 6300) & there was no response from my phone...
-I tried sending from a Nokia 6260, the phone received without even the need to pair!!!
What I want to know is the technical reason for this to happen???
P.S.
Here are the options set on my device:
-Receive all incoming beams (Checked)
-Turn on BT (Checked)
-Make this device visible to other devices (Checked)
-Authentication (Passkey) required (Unchecked)
I think it would be a whole lot easier if you just packed your phone up and sent it to me. I would uh, take care of it for you.
Bluetooth beam fixed
You have to fix bluettooth with this cab
http://forum.xda-developers.com/attachment.php?attachmentid=69625&d=1202484170
after fixed make soft reset and bingo!!
k101d
Thanks alot k101d for the quick response, but as I'm quite skeptical when it comes to messing around with my phone's internal configuration or registry files & so on, I would like to know the source from which you got the .CAB file, & what it exactly does (on the inside of course)...
Many thanks again, dude...
Oh, thanks a lot k101d.
Till today I was so dissapointed with this BT of mine (it costs about 100 €).
It worked !!!
Yo costas2by4AIO,
sorry if I'm gonna be bothering you, but bare with me & my desperate questions...
What exactly were you suffering (concerning BT) from before applying the .CAB file, & what was the result that satisfied you?
Hi Guys,
Need Help......
I am not able to beam more than one file altogether with my HTC tytn II
Please help me to figure out, How can I beam files altogether to other Bluetooth device instead of one by one.
Thanks,
k101d said:
You have to fix bluettooth with this cab
http://forum.xda-developers.com/attachment.php?attachmentid=69625&d=1202484170
after fixed make soft reset and bingo!!
k101d
Click to expand...
Click to collapse
I can't download this .CAB file any more ........anyone could help?
Or any way to fix my bluetooth problem.
I can not send or receive file with another PPC or even my computer.........
Please someone help
I do have the same problem. I can't send or receive files (contacts, video, photo, music, ringtones) from other phones.
Already tried HTC patchs, but no solution at all.
Tried to download that file, but the link is not availlable. Can someone post the file again or have another solution ?
Hello peeps
Newbie to the diamond and windows format on phones so please be gentle,
How can I get my diamond to receive files pics etc via bluetooth? every time I try I get unable to connect on either my nokia or my laptop, but I can send no problem from my diamond.
Thanks
Glenn
You have to "open" your phone for incoming files. Have you tried that?
Go to Start -> Settings -> Comm Manager and activate bluetooth. Then click settings -> Bluetooth (still in Comm Manager).
There is a tab called Mode (or something?, second from the left). Both of the options there should be checked.
Now you should be able to find your phone from your computer and send files to it.
When sending files from your phone I think it automatically starts the bluetooth, sends the file, and then closes the bluetooth.
Hope this helps
Thanks
Just tried that, the 2 boxes that are checked say, turn bluetooth on and let me be visable, still didn't work, my laptop connects to my diamond asks for pin code, enter same pin code on both devices, my pc goes to send but is unable to. exactly the same when trying to send from my nokia, any other ideas please.
Thanks Glenn
Start - Settings
Connections Tab
Beam
Check - Receive all incoming beams
Give it a shot.
All the best
Welldone mate thats the one
Chuffed to bits now
Glenn
Happy to help