O2 XDA Mini S WM6 Upgrade Problem - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I have followed all instructions for unlocking my Wizard by O2 and have no problems upgrading. The big problem is when the phone goes to sleep it will not come back on or the screen will be locked up. Only a soft reset will make it function again until it goes to standby. I have tried every WM6 rom and I have the same problem. I downgraded back to a Cingular rom because I use them as my carrier. No problems running any WM5 roms. I have also used the Cingular patch after upgrading and there was no difference. Still will not wake up after going into standby. If i place a test call to phone while in standby w WM6 the phone will not ring but the backlight will come on. At this point no buttuns will answer call. Must reboot. Has anyone any answers or simular issues?
Thanks

You have to use either the 2.19 or the Faria 2.69 radio ROM to fix the problems you're having. Almost everyone who's used a different radion version other than those has experienced the same problems you're having.

Still Locks up
I started from the beginning downgrade/CID unlock/T-Mobile rom/radio update one at a time to 2.19 and 2.69. Still hangs on wake up or when receiving a call after 3-5 min. Works OK w/WM 5 but not with any of the WM6 upgades.

Are you using a G3 Wizard? If so, try to upgrade your IPL and SPL to newer versions (The most current is 3.08)

Updated IPL and SPL to 3.08 (Same Problem)
Well as long as I never let my phone sleep I will not have any problems. There must be somthing that WM6 is doing that WM5 does not do. Might be a registry setting. Anyone with more ideas besides going back to WM5. IPL and SPLs loaded fine when I updated them.

Do you have your phone passworded? Seems to me that I remember that people were also having problems like that when they set a password and set a sleep timeout.

As I remember, that is causing Wizard to power on itself...

Related

SX66 ( PH20B ) Flashed with wrong Version need help

I, have Siemens SX66 GSM ( PH20B) Upgraded to wron version and now it boot with colored horizontel straps (red,green,blue,white) and goes to WM 5, with slow to none functions and also lost radio.
Now I, tried with several WM5 versions and it display error message ( Model ID error 100) Can some one help how to remove / clean it and recomend working WM5.
See some post at the bottom of this topic
If you you have lost the Radio, ie, no version number is displayed on cold booting/hard re-set, then all is lost.
As i had the same problem with a phone I was given to fix.
As most/all of the Upgrade programs Check to see what Radio version the phone already has, and if it cant see one it fails
My only course of action was to get the Phone fixed under warenty
Read all about it here
Hope.......
Mine did the same thing, it was sooooo slow that I was thinking about buying a new unit but at the last breath I did the following and it worked:
- Go to the BootLoader screen (Press: Power Switch+Media Player+Recorder+Rest) all at the same time, your PDA should say “Serial” at the top of the screen.
- Plug you PDA to the cradle and it should read “USB” at the top of the screen.
- Use At least TuMa 1.3 with Radio 1.13.
Note:
The upgrade EXE should load up with a picture of the PD at the left side of the screen that DOES NOT look like your SX66…it looks like an HP PDA…!!!
Mine came back to life but sometimes you might have to SOFT reboot your PDA to get the Radio to work (Hard boot then use a third party software to softreboot).
Good luck.
so using the MaUpgradeUt_noID.ZIP and radio rom only you were unsuccessful at flashing?
Black6spdZ said:
so using the MaUpgradeUt_noID.ZIP and radio rom only you were unsuccessful at flashing?
Click to expand...
Click to collapse
I, went through all upgrades without issue but now PDA is so slow it takes ages to change selections..
have you downgraded back to 03se and still have this issue?
You will have to follow the steps very accurately...if you leave any step out you might end up like me at the beginning when my device was sooooo slow it was useless.
I took these steps from this forum...try it
Best Luck…
Thanks for all help did every thing but still some of menu are so slow that take several minutes to open , still looking for some tips and suggestions or if some one one knows how to turn it back to W2003
I, remoed some of programs from my SX66 that seems to be causing problems and were npt compatible with and got my PDA back...its now working awsome...Thanks for all who helped

Wierd brick

Hi
first the details:
IPL/SPL 3.08
Radio 2.69
using a imate rom at the moment
i dont have a problem flashing between OS's or radios and ipl/spl stuff however when i do it i get into windows mobile and the phone is searching for a connection constantly. going into the options says to wait 15 seconds for the phone to recover but it never does
i did a search and it sounded like i bricked the device however on the wiki page my symptoms didnt quite match up, ie it works fine just not the phone.
i have tried reflashing the radio and doing the IPL/SPL procedure sevral times and have done a search in both the wizard section and the whole fourm, mainly on the terms 15 and seconds, as well as other words to describe the symtoms and have found a post saying to send a sms after waitng a bit (didnt work) and try reflashing the radio which i had already done
its 300 in the morning now and i have easily sunk 18 hours into trying to get it working. if no one can help i might just hand over one of the other win mobile phones i have as "backups" to the pearson i am doing this for
thansk again, sure i missed somthing but am too tired to comprehand at the moment
People say a phone is 'bricked' when it does same as a brick: nothing! no lights, no sound, no calls, etc...
Since this isn't the case and you understand the ways of flashing a phone i think your phone suffers from hardware malfunction.

Major rom issues i ned help sorting out

I seem to be having some biig issues with my tilt and was hoping for someone to shed some light on the situation for me, I have a tilt, now running on hyperdragon IIIr , hard spl 3.56 and a emonster radio, ever seince I've unlocked it and flashed the a rom I've ran into oone of two issues 1. rom works fine with exception to heavyish lag on typing that forces me to type slow (E.G. duttys 19716 hybrid) and I do a lot of typin so the lags is a big issue 2. running currrrently beforemention hyperdragon IIIr and emonster radio, (although I've had the issue on other radios) and it runs fine at first, I tap the power button don't use it for 20 mins or so then when it turns back on it either steps in from dark to bright and will be VERY unnresponsive like having to tap the windows button 20x times before I get one tap I've been flashing like a madman tyig tofind a rom that generaly works... PLEASE HELP
Learn to use search. I, as well as many other people, have the lag issue. It's been mentioned before.
The other issue could be either your device, ROM, or radio. Change to an official radio. If you still have the same problem, try going back to the stock ROM. If the problem continues to exist, it could be your device.
If it turns out to be the radio, simply change radios.
If it's the ROM, address it in the ROM's thread, not in a new one in a different forum.
If it's your device, you had better learn how to get it back to it's OEM state, provided you have a warranty.
Also, spacing, punctuation, and spelling tend to be helpful when seeking help. I'm not saying it has to be perfect, but it's nice for it to be understandable without having to analyze it twice.
Now, run along and play.
mr4r4n said:
I seem to be having some biig issues with my tilt and was hoping for someone to shed some light on the situation for me, I have a tilt, now running on hyperdragon IIIr , hard spl 3.56 and a emonster radio, ever seince I've unlocked it and flashed the a rom I've ran into oone of two issues 1. rom works fine with exception to heavyish lag on typing that forces me to type slow (E.G. duttys 19716 hybrid) and I do a lot of typin so the lags is a big issue 2. running currrrently beforemention hyperdragon IIIr and emonster radio, (although I've had the issue on other radios) and it runs fine at first, I tap the power button don't use it for 20 mins or so then when it turns back on it either steps in from dark to bright and will be VERY unnresponsive like having to tap the windows button 20x times before I get one tap I've been flashing like a madman tyig tofind a rom that generaly works... PLEASE HELP
Click to expand...
Click to collapse
It almost sounds like you installed an application that is causing your device to freeze up. Also, remember to hard reset after flashing. If you can please list the applications and sips you have installed and maybe someone can point out the culprit.
trust me spelling is never normally an issue but im typng from the device, unfortunatly I don't have a home computer at the moment. I've used search, I just haven't come across anything that matched my situation, the best working rom so far was duttys apr 29 hybrid. I've done some different radios and if anyone would be able to id love to read whatever setups you guys have on your devices thatwork and whatever issues you guys may be having btw my hard spl is 3.56 as well. I mean alll I wanted was 6.1 style messaging a good strong antenna (emonster is working well) if the roms fome with extras cool, if not its all good, I just need the device to work, thanks for all you help people
and btw the issue with the major slowdown is after flash (and hard reset) when I first tap the power button to put it on my belt for later no apps installed
This will be tedious, but try going back to AT&T Stock and see if you're still having an issue with the slowdown. Also, you might want to try looking for the Tilt Keyboard fix and trying that first. I still have lag with it, but it's worth a shot before you go back to stock.
If you still have issues with the stock ROM (try the stock SPL too if you can, there's instructions for going back to OEM you can click here to see those)
If you have the issue with everything set to stock, it's your device itself. If the problem goes away after reverting to stock, then try re-doing the whole SPL and flashing process for the ROM of your choice. At that point, you may wish to consider addressing your issue in that ROM's thread.
you are a genius, i ran it from the beginning and started it from scratch, i started with a light rom the new Hyperdraggon IIIr emonster rom and then hard spl'd at 3.29 (after i did the whole re stock and unlock process) im guessing i might not have done it right from the start and or the 3.56 spl might have been the problem also but its acting sufficiently well now i will keep you guys posted thanks for the support
I have 3.56 and have no problems. I almost always use a light rom and throw EVERYTHING onto my storage card. You also might trying running Pocket Mechanic

Hangs randomly

Hi,
Today I've got woken up half an hour later (7:20) than alarm time (6:50) by my Era's (Polish T-Mobile) Victor. I pressed dismiss, sound stopped, but the screen was on so i pressed sleep (top side button), nothing happend. Pressed something else, phone does not react.
Same thing happend when my caller disconnected first: phone freezed
I have ROM based on v. 1.94 (the new one from the forum), and before I have flashed i had HardSPL 1.93 (I don't know if it load new SPL) , then I have loaded(or at least I think it has loaded) SPL 1.38, still hangs randomly.
I also tried new Diamond Project and I had troubles with graphic (parts of UI were not redrawed...) and it also freezed my Victor.
My oryginal ROM was Polish customzied - blue&white Era's 1.37 that was slow as hell.
Did you hear about issues like that? Is it ROM or Hardware? Do you have any stable ROM you could recommend?
Do you think that radio rom 1.02.25.11 can have something to do with it?
doker said:
Do you think that radio rom 1.02.25.11 can have something to do with it?
Click to expand...
Click to collapse
I had random freezes when I used the .11 radio. Try reflashing back to .05, it should fix your problem.
Thank you for a clue. I will try now.

Tilt reboots constantly after 6.1 upgrade

I have an At&T Tilt. the phone worked absolutely fine until I decided to do the 6.1 upgrade on it. Now the phone reboots itself on it's own. Let me clarify that statement. It shuts the phone off, then I have to power it back on. Sometimes a few times in a row. It will do it when I am talking on the phone, using my GPS or browsing the mobile web. It doesn't discriminate. Has anyone else had this problem? These are the versions I have on my phone... am I missing an update somewhere or is this something I have to live with? Thanks for your help.
R 1.65.21.18
G 25.88.40.05H
D 3.57.00.00
l haven't had any problems like that. I just switched back everything on my phone to stock . but than again i went all the way back to wm6 ... lol
If your phone is still under warranty just get an exchange or try reflashing the rom upgrade and see if that fixes your problem.
also on a note: did you remember to hard reset your phone after upgrade?
upgrade
I will try to re-install the upgrade. I did do a hard reset afterwards the first time. It's pretty annoying for my wife (amusing to me) when she calls and our call drops in the middle of our conversation. Hopefully the reinstall will fix this. I'll keep you posted.
Did this get resolved? I am having the same issues...
I am having this issue on 2 phones. One was a 6.0 tilt that I upgraded (and hard reset after). The other is a 6.1 phone that I was sent from At&t after an RMA. They both reboot 5-10 times a day, or sometimes they turn off and won't come back until I plug them in. Any ideas?
One more thing to add here. Did you install a WM6.1 ROM or did you install a ROM/Radio Combo?
Just note that 6.0 radios will never play nice with 6.1 roms
Also, what spl are you using ? Stock oem?
by any chance do u have a memory card in the device. if so remove it and use the reset button to boot it. this may very solve the problem. I've experienced it
My tilt did this also. I found that it was due to HTC home customizer. It took about 20 hard resets to figure it out tho. After installin HHC the phone would reboot over and over again. I reinstalled everything over except for HHC and working fine now.

Categories

Resources