I want to buy a Wireless LAN SD card for my Xda II running WM6 rom. I want to know which one should i get? it should be 802.11 b/g. Please guide me!!
C-Guys WIFI card
Hi there
Im using the C-guys SD Wifi card, and it works great!!
Cheers
^^rac said:
Hi there
Im using the C-guys SD Wifi card, and it works great!!
Cheers
Click to expand...
Click to collapse
Can you give me a link on web.. and also is it 802.11 b/g (both). Did u try it with the latest WM6 rom which we got for Himalaya?
maybe somebody could confirm that wifi cards that worked in wm5 works in wm6?
i mean the step from wm5 to 6 was much smaller then the step from wm2003SE to wm5
Rudegar said:
i mean the step from wm5 to 6 was much smaller then the step from wm2003SE to wm5
Click to expand...
Click to collapse
oh yeah... MUCH smaller
Well, sure, we should build a compatibility list...
it is much smaller being based on CE 5.2
wm5 being based on CE5
and wm2003se being based on CE4
Socket Com E300
I use the Socket Com E300 on WM5 Hima PH10A, with the WM2003 drivers.
SDIO is not driven the same way on WM5 the why i first install WM5 drivers and the the WM2003 drivers!
I haven't tried it yet on WM6
SPECTEC SDIO WLAN Card
I used SPECTEC
SDIO Wireless 802.11b.It's work well.
See more info www.spectec.com.tw
Cheer
Sandisk Wifi/b Card without Memory
Hi,
My Sandisk Wifi/b Card without Memory is working after pushing the Reset.
Eject the card and reinsert it is not working you have to reset again. Is there any better driver out there? My one is from the year 2003.
Physical reset required on Socket Com E300!
I have a Socket Com E300!
I installed WM5 drivers => nothing
I installed WM2003 drivers + reset (no soft reset like with psshutXP) => OK
I think this issue is more coming from WM6, isn't it ?
nerfiaux said:
reset (no soft reset like with psshutXP)
Click to expand...
Click to collapse
What do you mean by "reset"? Hard reset? Or just sticking your stylus into the hole?...
sticking your stylus into the hole !!!! No comment....
utak3r said:
What do you mean by "reset"? Hard reset? Or just sticking your stylus into the hole?...
Click to expand...
Click to collapse
just sticking your stylus into the hole!...
You were waiting for that answer, weren't you ? ;-)
Mine is Dopod Wi-Fi card without memory which working fine in my himalaya WM6 platform. ^^
^^rac said:
Hi there
Im using the C-guys SD Wifi card, and it works great!!
Cheers
Click to expand...
Click to collapse
Did you install any driver?
I never succeeded to make it work on my previous WM5 release so I hope it will work under WM6, not tested at all.
Thanks.
Ok i have got the Spectec 802.11b Wifi SD working perfect on WM6 just from the standard drivers you get with the CD
I tried two different types of sd-wlan cards, both works perfectly!
Spectec wlancard a/b (but the plastic was broken after a few usage)
JustMobile SDW11G it is a very fast card, i suggest you!
Both card has wm5 driver which works correctly.
I use the Spectec 802.11g SD Card. I think its model ends in 821. It's a blue SD card.
I just used the CD provided with it and it installed drivers for it on my phone perfectly. The card actually works better under WM6 then it did under WM2003SE.
thinboon said:
I used SPECTEC
SDIO Wireless 802.11b.It's work well.
See more info www.spectec.com.tw
Cheer
Click to expand...
Click to collapse
I would like to buy one with this brand too, thank for the information.
My Ambicom W-11SD is working from WM2003, WM5, and now WM6.
Hima+WM6+SDW-820 ???
Some Help please!
I have T-Mobile MDA (Himalaya) with WM6. Works really good & fast, but missing WiFi and i decide to buy SD WiFi. Found that one:
http://www.spectec.com.tw/sdw820.htm
but don't see driver for WM6 !!!
Any idea? Is this device working with WM6 or not!
Thanks for your answers
B.R.
Related
There is a file pda2K_2k5.rar on FTP that contains the WM5 ROM for BlueAngel. Origin of the file is unknown, flashing it to my device showed that it is really a WM5 ROM that is working. The OS version is 5.1.1700 build 14343, it has MS bluetooth stack and no camera. The camera drivers are present, so I think it would be possible to extract app from Himalaya ROM.
It has no MMS application and no SIM toolkit.
I've repartitioned DOC, so now I have 61Mb storage area and 128Mb RAM that are fully accessible.
All hardware buttons are working, and the keyboard is working fine, though there is no control panel applet that allows you to turn off its backlight.
Making hardreset is tricky - you have to press camera, record, power and reset buttons simultaneously. There you'll have a choice to use debugger (something about KITL), reset registry and format built-in storage. Navigation in menu is done with camera and record buttons, exit - "mail" button.
Thanks download now .
great it working thanks
So glad I worked late tonight...
Unbelievable! :shock:
Awesome etc.
I think the simplest thing to say is: THANK YOU!
That will not stop me from buying a native WM5 PDAphone like the Universal or the Wizard, but still I'm really happy this happened. If only that could force O2, I-Mate, Qtek etc. to sell an official upgrade, that would be nice...
Until now, I had to put my BA in reserve and used my XDAII for everyday for a single problem: BT!!! Maybe the MS stack here will do as good as the one in my XDAII 1.72. Just need my GPS and headset to work properly. The rest is luxury at this point.
BTW, Mamaich, is the procedure similar as the one for Himalaya WM5? Any difference?
Cheers,
Hal
Mamaich, it's time to make tweaking for the camera and especially the O/S speed.. :?
Did someone take down that RAR file? I can't seems to find it anywhere under BA section on the FTP site.
file
uploads/Blueangel
Sweet!! Thank you!!
maybe we can get the mms application from the universal?
sx66
so...i hawe sx66 from cingular (not locked) rom version 1.33.10 wwe can i upgrade with pda2K_2k5.rar ROM or not...and what i get with that i meen with pocket2005 ? can someone tell me...im new here and i will be gracefull to answer me...
10x
ps. blueangel rulz
Silly Question Really
Buzz Do you think you will be able to get this Rom 2005 Rom to work with Alpine (XDA 2i)
Re: Silly Question Really
Studulike said:
Buzz Do you think you will be able to get this Rom 2005 Rom to work with Alpine (XDA 2i)
Click to expand...
Click to collapse
It would not work on any device other than BA.
maybe we can get the mms application from the universal?
Click to expand...
Click to collapse
At first we need a ROM image rom Universal or better an official ROM update.
unbelievable brother mamaich...but its true... :lol:
Erm...
This is not the same file as on Buzzdev.net is it?
The version is different.
Think I'd have better luck with this one?
Hi Mamaich,
I installed WM5.0 on my PDA2k but unlike you, i only got 49MB storage space. How is it that you got 61MB while i got only 49MB. What did i do wrong?
Also, why am i not able to synchronise with outlook after the rom upgrade?
Thirdly, i can pair my BT headset with my PDA2k but it does not transfer any calls to the headset. I tried using a BT GPS and that works perfectly fine. What do u suppose the problem is?
Would appreciate your comments.
UD.
Has anyone here yet or not weather or not this will work with Sprint or Verizon CDMA phones yet?
Wherez the ROM on the FTP, i searched but i couldnt find it. Its not under BA. Where is it? Is it different from the one that Buzz had on his site?
UD.
wesley762 said:
Has anyone here yet or not weather or not this will work with Sprint or Verizon CDMA phones yet?
Click to expand...
Click to collapse
Still no luck with VZW CDMA, and I haven't heard of a successful case yet.
Yes, the file is the same as the one on Buzz's site.
ftp://xda-developers.com/Uploads/Blueangel/
Hi all
I´ve searched the registry with no luck at all... Is there anyway to lower the backlight brightness? Cause like this it drains the battery really fast! Rudra was right :?
Hey btw i´ve tried my Bt headset and it works better than before!! at least i can go like 5 - 6 meters from my phone and still hear the caller
I'm running Helmi's WM2k5 AKU3.0 v.1.2 Beta rom, but I have a problem with wm5torage.
When I enable it, it shows up on my computer but when I go into the device nothing shows up. I seem to remember it working fine in the AKU2.3 rom.
Anyone else got this problem?
Biohead said:
I'm running Helmi's WM2k5 AKU3.0 v.1.2 Beta rom, but I have a problem with wm5torage.
When I enable it, it shows up on my computer but when I go into the device nothing shows up. I seem to remember it working fine in the AKU2.3 rom.
Anyone else got this problem?
Click to expand...
Click to collapse
Yep, doesn't work for me either.
...found this one in another thread...
http://forum.parallels.com/thread2743.html
Biohead said:
I'm running Helmi's WM2k5 AKU3.0 v.1.2 Beta rom, but I have a problem with wm5torage.
When I enable it, it shows up on my computer but when I go into the device nothing shows up. I seem to remember it working fine in the AKU2.3 rom.
Anyone else got this problem?
Click to expand...
Click to collapse
Yes, i have the same problems.
I did a test, and realise that drive letter that you see inside your PC is the "Extended ROM" on your device.
You can make "extended ROM" visible and copy some files to it. and you will be able to see it on your PC.
on all wm5 roms ive tried with extrom support wm5torage uses it, i think it may have somthing to do with the order they are mounted...
Midget_1990 said:
on all wm5 roms ive tried with extrom support wm5torage uses it, i think it may have somthing to do with the order they are mounted...
Click to expand...
Click to collapse
I thinks you are right. WM5torage see the first storage only, some ROMs see the SD card and some see extended rom.
Would there be any way around this do you think?
Biohead said:
Would there be any way around this do you think?
Click to expand...
Click to collapse
There's a way... Use the new Version Of WM5Storage v1.7 with the ability to select the disk to be mount.
the detection procces in my computer is slow, maybe my firewall, I Dont know for sure, since the author said this app might not work for some device, but give it a try...
I'll try it tonight on your AKU3.2 ROM Helmi, when I get round to upgrading.
It also detects very slow on my PC, but my XBox 360 picks it up straight away so I will use that one.
wm5torage v1.7 works fine on 1.3 Helmi. Good work
I have the same problem with both WM5torage 1.5,1.6,and 1.7 in both Helmi 1.2 and 1.3. When I activate WM5S and dock the BA, I get the windows device connect sound and no drive pops up in explorer. As soon as I undock the BA a removeable drive briefly pops up as the device disconnect sound chimes. What is causing this?
I've not actually tried docking with my PC yet - but it connects fine to my Xbox 360, is recognised and can browse though it and play my music So it might be an OS problem if it won't recognise it on the PC (I run Vista BTW, so that might be my problem).
Same problems , using 1.7 , drive does not show up on windows. And also Storage card disappear from device, must reset device ....
I am running helmi's 1.3 beta and 1.7 wm5torage and it works fine. The only problem is that you need to give almost 5 minutes to it before the drive appears.
I think you guys might be facing the same slowness. Which is why the sound of device connecting and disconnecting is coming.
Hope this Helps.
last time I remember it working fine was 1.5 with a logout ROM
a different problem for me
i have :
universal
helmi c 3.5 v1.3
wm5storage 1.73
it says and i quote !!
Can't switch to mass storage usb driver, error 1f. maybe some running programs have files open on storage card, preventing direct access. try to close all running programs.
note that i do NOT have any running programs, or have any programs installed to storage card !!!
all i have on my storage card are mp3s ....
can't seem to make it work !
V1.73 works on Helmi/Logout ROM.
As Naveen_J pointed out, it takes from 3 to 5 minutes to display the drive icon in File Explorer.
The Storage Card is missing after disconnect but taking it out of the slot & reinserting back gets it recognized by BA once again. No need to soft reset.
@dhob187:
Do you have installed & running any Today Screen plugin (Resco Today, SPB +. W. Advance Desktop, etc.) that displays SD Card status? In case any of those plugins are running, might be causing the conflict.
Hello,
I want to have two things on my Treo: WM6 and wifi. Is this possible? I know I can have one of them, but not both - WM6 or wifi on WM5.
I'm still using WM5 because I haven't heard about Spectec SDW-822 miniSD wifi card working with WM6.
I wrote tho emails to spectec, but with no answer
Anybody has good news for me?
miloszz said:
Hello,
I want to have two things on my Treo: WM6 and wifi. Is this possible? I know I can have one of them, but not both - WM6 or wifi on WM5.
I'm still using WM5 because I haven't heard about Spectec SDW-822 miniSD wifi card working with WM6.
I wrote tho emails to spectec, but with no answer
Anybody has good news for me?
Click to expand...
Click to collapse
I tried that and working fine. Just like in WM5, it will disconnet the WIFI suddenly and you need to plug in again...
Wow, I'm sooo surprised! Do you have any drivers or just put card in the slot?
Damn, that makes me want WM6 much more!
miloszz said:
Wow, I'm sooo surprised! Do you have any drivers or just put card in the slot?
Damn, that makes me want WM6 much more!
Click to expand...
Click to collapse
I have just installed with the WM5 driver as usual. It works! Go ahead to upgrade if you don't need Blackberry Connect.
I have downgraded it becos of BB service can't run in WM6 yet.
f810 said:
I have just installed with the WM5 driver as usual. It works! Go ahead to upgrade if you don't need Blackberry Connect.
I have downgraded it becos of BB service can't run in WM6 yet.
Click to expand...
Click to collapse
Ok, thanks for help
Support - what support?
Don't hold your breath waiting for a reply from Spectec! Their website is the worst I have seen for quite a while. Broken links, badly translated English and emails that bounce back from their support email addresses.
In the end I returned my Wifi card fro a refund because of this so called support.
cze milosz mam ten sam problem z karta spectec na wm6 nie widzi zadnych sieci :/ z dupy jak nic, bo wirelees przydaje mi sie, masz na to juz jakis myk? wm6 jest o 100% lepszy od wm5 szybszy i stabilniejszy i nawet czyta juz karty sdhc : )
Pozdro
rysio123 said:
cze milosz mam ten sam problem z karta spectec na wm6 nie widzi zadnych sieci :/ z dupy jak nic, bo wirelees przydaje mi sie, masz na to juz jakis myk? wm6 jest o 100% lepszy od wm5 szybszy i stabilniejszy i nawet czyta juz karty sdhc : )
Pozdro
Click to expand...
Click to collapse
Check your PM
I have not had success with the WM 5.0 driver and the AT&T WM 6.0 ROM.
Yes the Spectec WM 5.0 driver installs, the Treo recognizes the 822, sees a WiFi connection, asks for the WPA key but then fails to connect. From then on the WiFi settings always prompt "To Configure your wireless network, please enable your wireless network card".
I have tried the Spectec WM 6.0 Standard driver for the Motorola Q with no success too.
Any additional insight in how anyone has succeeded in getting the Spectec 822 to work on the Treo 750 with WM 6.0 would be greatly appreciated.
I also tried disabling the AT&T proxy with no success.
rysio123 said:
cze milosz mam ten sam problem z karta spectec na wm6 nie widzi zadnych sieci :/ z dupy jak nic, bo wirelees przydaje mi sie, masz na to juz jakis myk? wm6 jest o 100% lepszy od wm5 szybszy i stabilniejszy i nawet czyta juz karty sdhc : )
Pozdro
Click to expand...
Click to collapse
Wich language is it ???
[email protected] said:
Wich language is it ???
Click to expand...
Click to collapse
Strange version of Polish
cnordb01 said:
I have not had success with the WM 5.0 driver and the AT&T WM 6.0 ROM.
Yes the Spectec WM 5.0 driver installs, the Treo recognizes the 822, sees a WiFi connection, asks for the WPA key but then fails to connect. From then on the WiFi settings always prompt "To Configure your wireless network, please enable your wireless network card".
I have tried the Spectec WM 6.0 Standard driver for the Motorola Q with no success too.
Any additional insight in how anyone has succeeded in getting the Spectec 822 to work on the Treo 750 with WM 6.0 would be greatly appreciated.
I also tried disabling the AT&T proxy with no success.
Click to expand...
Click to collapse
Use the driver here:
http://60.248.111.19/driver%20for%20web-site/sdw-820%20driver%20for%20wm5.0/wlan11b-14CNU.CAB
Spectec SDW-822 driver and WM 6.0
f810 said:
Use the driver here:
http://60.248.111.19/driver%20for%20web-site/sdw-820%20driver%20for%20wm5.0/wlan11b-14CNU.CAB
Click to expand...
Click to collapse
I have tried that driver multiple times. The driver installs fine and then the SDW-822 sees my AP and asks for the WPA key. The SDW-822 attempts to connect and then reverts in WiFi Settings to a message that says configure device.
However when I disable WPA on my Airport Extreme and reboot both the Aiport and the Treo the card connects.
Anyone else running WPA on or WPA and an Airport that can corroborate my findings?
I have been testing Devicescape's Symbian s60 beta client and it was not functioning correctly either. When the WPA encryption was turned off not only did the Spectec SWD-822 start to function normally so did the Devicescape s60 beta.
My suspicion now is an Airport Extreme update that Apple released on July 31st and I installed a day before I upgraded the Treo 750v to WM 6.0.
miloszz said:
Strange version of Polish
Click to expand...
Click to collapse
Was not sure...
Thanks.
What about vpn connections via wifi? In wm5 when I was trying to use PIE or POutlook connection was disconnected (I had to use NetFront web browser). Is PIE working over vpn now?
Btw,
on spectec website you can download WM6 drivers for sdw-822
After turning the WPA/WPA2 on and off, rebooting the airport and soft resetting the Treo the WM 5.0 driver for the 822 works fine.
I wish to have WiFi under the cover . hidden in the SD gap, like regular SD memory card. I hate when its sitcking out of the Treo.
It's inconvenient , but need this one too
I got Voda WM6 now and drivers for Crossbow from Spectec website. Card woks just great! No more resetting to get it working - I just plug card and after 30 seconds I'm online
Still I don't know about VPNs via wifi (I got it on my university and now I have vacations )...
Btw,
I got wpa in my local network.
Hi, don't know how old this post is now...I'm running a Treo 750 on WM6, using a Spectec Wifi card. The driver is the Moto Q one off the website and I've found that I have to disable the phone, reset the handset then insert the card and it detects the card. It will always detect my network but sometimes after a while it won't connect to it...so a bit temperamental. Maybe this is some info for someone
TW
I tried many different versions of wm5torage on my wings, and I can't get one to work I was wondering if it was working for you, S730 owners?
I tried with a 1GB microSD, and a 8GB SDHC with no success at all...even Softick Card Export trial can't give me access to my card
XP recognizes a USB peripheral in the tray, I can even see a removable drive with a letter ( G: ) , but my data isn't there (it's empty) and I can't write on it
I would be glad if someone could help me out...
Tried on mine, I have windows Vista and its working for Me, all directories and files are accesible for Me. I can make a new directory on the card.
Thank you for trying ! I guess the only thing I can do now is a hard reset of my device..... It was very tweaked to save RAM
EDIT:: I really can't get it to work Please, which version of wm5torage did you use ?
I'd also like to get WM5torage working on the S730 with WM6.1. I'm trying v1.80. A Removable Disk (G appears in Vista but if I click it I get an error message saying that it needs to be formatted.
So what's the secret mykie?
You know, I think mykie has a T-Mobile Wing and not an HTC Wings.
The Wings has a bad USB driver that can't properly be used by WM5torage, if I understood it correctly.
On the Kaiser (which has the same chipset as the Wings and surely the same drivers), they managed to make wm5torage work by installing Softick CardExport too (which installs his own USB driver, that wm5torage can use afterwards).
I couldn't reproduce it on the Wings with the SP version of CardExport
I have the same problem. Did you find a solution?
WMStorage WORKING
You must cancel at setup->connection->USB to PC
Enabled advanced network functionality.
Do you know anybody, what means allow it?
frem, I did not find a solution to this problem yet. I'm using an USB stick where you can put your sdcard in.
jivo, it's the wingS we're speaking about.
I won't think wm5torage works for anything anymore :-/ At least on my kaiser it fails all of the time. I just plugged it into a Vista machine and I love how easy it is to just access the storage card. Vista would get rid of any desire for WM5torage other than the fact that everyone doesn't run Vista.
jivo said:
You must cancel at setup->connection->USB to PC
Enabled advanced network functionality.
Do you know anybody, what means allow it?
Click to expand...
Click to collapse
It's worked before hw service (new displey) and before flash to 6.1. WMStorage working at my Mteor WM6.1. I don;t know where is problem at Wings. I am sorry.
I have this problem now too. I am use WMStorage 1.8
As you might probably knew already, Windows Mobile 6.1 is having problem with USB mass storage emulation software like SoftTick CardExport or WM5Storage.
If you have SofTick CardExport, please report it here :
http://softick-forum.com/viewtopic.php?t=1498
Because if more people reported there it will get more attention.
And I believe (hope) that it will also benefit the WM5Storage (I still remember that in the olden days, we need to install Softick trial version to make the WM5Storage work).
I upgraded my Kaiser yesterday to official WM6.1 and wasn't aware of this problem yet:
infact I've a x51v WM6.1(LennySH Dell Stock Beta 7) and with Card Export II 3.08 I can explore both SDHC cards from my PC-XP.
So the problem with Card Export II,probably,is linked to Kaiser and not to WM6.1
Just curious, but what problem are you having? I am using Card Export II 3.11 with Dutty's 4/29/08 6.1 rom on my Tilt and all seems to be working fine.
Hi, i have a Problem too. When i activate WM5torage, my windows recognize my sd card as a usb stick, but i can't grab on it. My Windows show me the Message "Its not Card in", But it is a card in. Can one help me.
Tnak you
Card Export fixed !!!!!
http://www.softick.com/pocket-pc/cardexport2/
Its now FIXED!! and works great for wm 6.1 upgrades. My tilt is now whacking across over a gig of photo files without stopping for a pause. USB settings DO NOT need messing with nor do any of the CardExport functions.
Install.....and use as a mass storage device. I did not need to play around with any of the settings either PPC or PC end.
great program. was surprised my tilt didnt come with this..
I've flashed about 10 to 15 WM6.1 ROMs and have used Card Export II successfully in every single ROM. I don't think it's a 6.1 problem.
Cooking CardExort II into a ROM?
I have tried a few times to make an OEM package out of CardExport II but have never managed to get it to work. I installed the Application, copied all the files off and did a registry export. I then searched through the exported registry file and extracted all (I think?) the CardExport II entries and built an OEM package. So I have at the moment an almost working package however when the application is launched and you click connect, ActiveSync disconnects OK, then a few seconds later the big button on the Kaiser turns from Disconnect back to Connect and ActiveSync re-connects.
Has anyone sucessfully made an OEM package of CardExport II to include in a ROM?
Cheers
Andy
nicholasendean said:
http://www.softick.com/pocket-pc/cardexport2/
Its now FIXED!! and works great for wm 6.1 upgrades. My tilt is now whacking across over a gig of photo files without stopping for a pause. USB settings DO NOT need messing with nor do any of the CardExport functions.
Install.....and use as a mass storage device. I did not need to play around with any of the settings either PPC or PC end.
Click to expand...
Click to collapse
and what is a serial number???
hi you have written that cardexport work for you,. I downloaded it from your link and installed but it doesnt work and it needs serial number(with any ROM i have tested so far)...how did you fix it?
thx
peto01 said:
hi you have written that cardexport work for you,. I downloaded it from your link and installed but it doesnt work and it needs serial number(with any ROM i have tested so far)...how did you fix it?
thx
Click to expand...
Click to collapse
You could fix it by sending a few dollars towards the developer. Best 15 bucks I ever spent on windows mobile software.
http://www.softick.com/mobile/pocket-pc/cardexport2/
rob.ocelot said:
You could fix it by sending a few dollars towards the developer. Best 15 bucks I ever spent on windows mobile software.
http://www.softick.com/mobile/pocket-pc/cardexport2/
Click to expand...
Click to collapse
What he said.....
I use Windows mobile 6.1 and it works fine for me. They have the best protection on the software I have seen and I believe it still hasnt been cracked. Most people who have a problem with this software are using a cracked version which doesent stay cracked for very long, it then stops working in many different ways IE on the website's FAQ
Q: My Card Export II works fine but sometimes it says that "Wrong usb status returned by underlying driver". How can I fix this?
A: Just do not use cracked or patched versions. If you like Card Export II, consider purchasing it. Card Export II costs only $14.95. After receiving unlock code, remove your patched version from your handheld and install fresh version from our web site. After that register it using unlock code you have received from Softick.
Best app on my phone....
Hello,
my problem is at wm5torage:
when I start a java application it doesn´t work. It comes the error:
"Cant´t switch to Mass Storage USB driver, error 1f. Maybe some programs or plugins run from or have files open on storage card...."
But I have no contact at this time to the SD-Card.
Card Export works at the same place. But it isn´t free, so I try to use WM5torage, because it is free.
Can anybody help me with this problem?
Thank you
Best regards
Mathias Kant