I installed the Palm thread app ripped from WM6 device board and everything works except sending MMS I keep getting out of memory errors. I made sure that the pic is under 300k but as soon as I hit Send I get the message. I'm with cingular/at&t. I have searched regarding this but I noticed that for some people it works fine and other not so its hit or miss. But I wanted to know if anyone else has tried to use this on there kaiser.
Thanks
i tried it and no, you cant send any MMS's (I tried some of the other varients found elsewhere on this forum but none work better). In fact I found that this app had knock on problems all over my TYTN II and slowed down the machine considerably. Since this isnt an app you can just remove I had to do a hard reset.
Thanks for the reply hopefully someone figures out a fix for the slowness and mms not working on the tytn II
No one else has tried Palm threading app on there Keiser yet? and has mms working with AT&T??
I too tried it on my Kaiser and could not get the mms to work no matter what size file I tried, it would give me the memory error. I was able to uninstall it through the add/remove programs though and not have to do a hard reset.
jhernand1102 said:
I too tried it on my Kaiser and could not get the mms to work no matter what size file I tried, it would give me the memory error. I was able to uninstall it through the add/remove programs though and not have to do a hard reset.
Click to expand...
Click to collapse
I am experiencing the same. Luckily I don't use MMS very much so if I absolutely need it I can Uninstall Threaded SMS and fetch the incoming MMS then re-install threaded sms. I had same issue with Cingular 8525..Too bad, this is the best threaded sms app out there to me. I can't understand why they haven't built a threaded sms app that comes pre-installed. So basic. Everyone uses SMS. What are they thinking?
any updates on this one yet? I miss my threaded SMS/MMS
**** it doesnt work for me either
****ing BS...please shogun mark, HELP!!!
i wanna stress how important this app is to me.....i was sooo ****ing excited to go from 8525 to kaiser. this actually almost makes me wanna go back.... even though the kaiser is soooooo much sweeter. im beggiing someone to please please work on a fix for this!! please
has anyonetried setting up theconnection settings by hand in the Palm app? I always did myself and it works great
austinsnyc said:
has anyonetried setting up theconnection settings by hand in the Palm app? I always did myself and it works great
Click to expand...
Click to collapse
Which version of Palm threading app are you using?? I have tried to setup the correct settings for the ATT mms part and still as soon as I try to send a mms i get the "out of memory error"
if anyone gets it to work they are brilliant...i have the shogunmark version from windows mobile 6
ttttttttttttt
It is a known bug in the app. Just be thankful we have what we have. To better understand, go here:
http://forum.ppcgeeks.com/showthread.php?t=621
Works for me. The Shogun version thats circulated around doesnt work. You need the full version. Do a search and you might find it. THe problems are the same on most WM6 devices, and not just the Kaiser.
P.S. Some f-in patience might make people actually want to help you. 6 posts, half dropping F bombs doesn't endear you to the community.
Temporary Fix
Well this is what I do to have palm threading and MMS working on my Tilt witch is something I have asked before but haven't gotten an answer but this is my crazy hack or whatever you want to call it.
My theory was well since the MMS portion for Palm threading is out of the question regarding a fix from what I have been reading about. I asked before If after you install palm threading is there away to enable again the default MMS application that came with the phone like that giving you the option to use palm threading for Txt's and sending MMS' to be sent by the default application witch i like better.
I have the files but I dont know where to upload them too but if someone can post them up I will send it to them.
Basically I managed to get me the cab installation of Arcsoft MMS composer ver 4.0.21.28 .. I noticed that tilt has a new version 4.0.3.?? anyways so basically this is what I did..
1) install Palm threading application - reboot device
2) Install Arcsoft MMS application - reboot Device
3) Install EnableMMS.cab - Reboot
4) Re-apply ATT MMS cab configuration so that MMS gets configured
Now when I press on the email key I get the option to compose a MMS and I can receive them fine..
Like i said this is something I just tried for the heck of it and it worked but I dont guaranteed it will work for everyone. I have tried this on the Tytn II and now I just received my Tilt and it works good.
If there was a way to just re-enable the MMS portion I think there wouldnt need to install the slightly older version of arcsoft composer viewer but I havent able to figure it out..
PS. I tried uploading the zip files but it keeps telling upload of file failed..
Can you e-mail me those files, please.
Hi, is someone able to upload these files somewhere?......thanks in advance
ok here they are.. Let me know if they work for you
http://rapidshare.com/files/61245824/MMSsetup.zip
Thanks doug0365, i will have to do a full backup first on my kaiser before i install the files......its missing the threadersms.cab though....but thats ok i found the file in the kaiser forum.......will report back later today of the outcome.....thanks again.
Related
As a newbie, I shocked myself that the rom upgrade went so smoothly! Push email is working great with 4smartphone, and the 8125 flies!
I installed a few of the original .cabs (smartdial, mms, edge icon) but I cannot get mms to work.
I had no MMS account option until I installed the MMS cab, but since then the account is there and I receive MMS messages no problem...except for 1 thing:
When the messages arrive, they download what appears to be the attachment, but the icon shows as a vertical black box attached to the message, and I cannot open the picture at all. I can redownload no problem...but the picture won't appear.
Also..the phone keeps trying to redownload the picture every couple of minutes.
Any ideas? Is there another cab I need to install?
thanks.
I am 99% sure I have the settings correct, as they were taken from c
problem is you installed Cingular's cabs on a new rom. Which rom are you using anyway? can't post too much information, but as you have, you can always post too little.
I am using the newer Qtek rom on my 8125 and mms works great. it also worked great on the Imate 2.16.9.1 ROM. But I just installed the default titled roms from the Imate and allowed the customization to happen for the Qtek. Then manually configured MMS Server as the MMS account was there after running the new cabs.
I am using the new ROM but I do not use MMS, howver I will note that QTEK's EXT rom has MMS cabs, I would advise doing a hard reset and letting the QTEK EXT Rom run. I couldn't find ANYTHING in the EXT that would be unwanted (*except MMS for me since I dont use it, but I still let it install, meh.) I don't know if I can send MMS with my current plan, I have unlimited internet but no sms plan or mms plan as far as I know... can I send and receive MMS? If so I will test it for you.
Later; Lew
you would get charged for sending them, I think 15 or 25 cents per message... but no need... I am using the Qtek ROM 2.17.7.2 allowed it to run the customization (ie all EXTRom cabs installed) and after I setup the MMS server it worked fine. Send and Receive.
http://forum.xda-developers.com/viewtopic.php?p=244432#244432 -- instructions I created to setup GPRS/EDGE and MMS
Some people want to be notified that they are on EDGE and if you don't want to make a simple reg edit (change a 0 to a 1) then you can use the Cingular EXT Rom that sets the EDGE icon.
LOL, I thought the cab file had the ICON inside... care to share the registry value it changes? I liek making my own changes. =)
Thanx; Lew
Haaa.. Haa... nope... just this.
HKLM\Drivers\BuiltIn\RIL\EnableDifferGprsEdgeIcon
[Dword] 1
well...it seems I got it working.
I downloaded the newest imate released aku2 rom and reflashed the phone with it (after unlocking, etc.) As per everyones instructions, I hit the soft reset when it asked for the carrier so I didn't get any of the customization.
I then installed a few of the cingular cabs (mms, edge icon, smart dialer) and everything worked perfectly...except mms.
I found a thread at howard where someone had the same problem, and I found that I also needed to install 2 other cingular cabs. sms. and something with EON in it. After I did that, MMS worked perfectly.
so...as of now...the phone is flying (even with the few cingular cabs I installed.) no lockups, push email is working great.
keeping my fingers crossed. If I start having some problems, I will take your advice and hard reset. Until then...it is working very very well....mainly because of all the help and tips I got on this forum!
T
I agree, I'm glad this forum is here.
In fact, speaking of help and tips on this forum.....
dude!!!! I can't believe you didn't post some type of link to those files or atleast threads!!!!! To help others towards a solution!!!!
Somebody sent me a text message and I can't access the download....
Ah well, back to the search function.
I hate you!
Just kidding :twisted:
for the record i have a wizard G3 (MDA) and i am running wm6 crossbow with arcsoft 3.0.7.19
I have several gripes about arcsoft 3.0.7.19 or watever the one is thats available.
1. it seems to be made for wm2003, am i the only one who noticed that it doesnt have softkey support?
2. the whole poutlook program is jus wrong.lol. the soft key that used to be for new, now says delete and the new option is in a context menu. what sense does that make?
3. the mms program always downsamples my pictures 10k no matter how large they are when i send them they come to my fone at 10k and 160x120 or sumthing abstraneously small.
i make these gripes not becuz im not appreiatrive i jus hope someone has figured out a fix to these issues and im not the only one experiencing these issues
also is there anyway to use the arcsoft mms from the 2.26 ship tmobile rom, seeing as there as been no progress on why the 3.5 from xplode doesnt install?
sorry for the rant, thanks in advance
no ideas? bump?
Atleast we have arcsoft but i have that problem too but every one that i know has regular phones so its good for me. i think you have to cange the setting from arcsoft and in the picture viewer too so that you can send them bigger or original size. some one correct me if im wrong doing this from memory.
From another thread. This is the biggest problem with the phone.
1- I installed the WM6 threaded text (i have to have that) so now sometimes when i get texts, it vibrates and makes the sound i chose. even though vibrate is off in the notifications. EVEN if the phone is set to silent i still get a vibrate on the incoming text.
here is what else we found
"From all the searching i have done on various boards with this threaded SMS app it appears this is a well known bug. If you reset the audio profile it does not buzz until you slide the keyboard out at least once during a session, then it vibrates from then on. If anyone comes across a bug fix or a "most recent" version that does not suffer this for Kaiser TYTN II than I would be pleased to know." dakotadave
Please help. I am waiting on Cody from one of the other forums, who actually created the SMS threaded app.
this seems to be only a wm6 thing since the same app didn't do it on wm5 devices. it seems to happen on all wm6 devices so far.
what I have don't that I think has stoped it is I have my "sliding sound" disabled. I don't know if this is a forsure fix or not, but I don't remember getting the vibe for a long time now.
give it a try. maybe it is the fix. maybe it will just stop some of them.
I don't know.
cody
codyppc said:
this seems to be only a wm6 thing since the same app didn't do it on wm5 devices. it seems to happen on all wm6 devices so far.
what I have don't that I think has stoped it is I have my "sliding sound" disabled. I don't know if this is a forsure fix or not, but I don't remember getting the vibe for a long time now.
give it a try. maybe it is the fix. maybe it will just stop some of them.
I don't know.
cody
Click to expand...
Click to collapse
I do have the sliding sound disabled. I also have the unit on silent and still get it.
I did this
http://discussion.wmexperts.com/showthread.php?t=139379
to get threaded sms
but i did NOT go past #11. There was no file on the phone named palm messaging.
But i did delete "poutlook"
that thread is NOT FOR WM6 DEVICES. that was for pre aku 2.3 devices like the treo 700 w/wx. I posted a new thread on that same site saying that. the WM6 devices have a one step cab install. there is no need to remove poutlook from the startup folder cause it is not there.
Mods forgive me or move this if i put it in the wrong place
Why are all the kaiser roms with JOINED MMS
I hate the joined MMS/SMS
And no matter what i do I cant get them to seperate
Is there a specific path to take with kaiser roms
on my hermes i could just install a cab i have for SPLIT MMS
it does nothing on my kaiser
**Someone HELP Please**
i have been all through the boards searching for how to fix
but only thing i fund was that Dutty's old rom had split mms
OKAY 57 views and no posts
An expert please HELP ??
I like split mms and i like Palm threaded
Niether of which i seem to be able to get on my KAISER
WHAT GIVES?
tramane said:
OKAY 57 views and no posts
An expert please HELP ??
I like split mms and i like Palm threaded
Niether of which i seem to be able to get on my KAISER
WHAT GIVES?
Click to expand...
Click to collapse
Well first of all, most people probably just didn't answer because this question should have been a new thread in the rom DEVELOPMENT forum.
Second, to get split sms/mms you only need to install an older version of archsoft mms, like the one in my cabs folder linked in my signature. Make sure to soft reset immediately before you install the cab.
I never liked palm threaded text messaging, so i can't tell you if it works on wm6.1 roms, but all WM6.1 roms have threaded messaging already.
Both of these answers could have easily been found using the search function on the site.
tramane, i personally can't help you on this but i do know that Dutty has done this from some of his roms if you want to check there or contact him for some help. If he is able to help you out please post here so others can see what needs to be done.
I too like the split SMS and MMS but ever since i stopped using Dutty's roms i haven't had that and i've learned to deal with it. Although i have a PIM backup that i can only get the MMS from if i have those two split so yeah please let us know.
otherreligion said:
tramane, i personally can't help you on this but i do know that Dutty has done this from some of his roms if you want to check there or contact him for some help. If he is able to help you out please post here so others can see what needs to be done.
I too like the split SMS and MMS but ever since i stopped using Dutty's roms i haven't had that and i've learned to deal with it. Although i have a PIM backup that i can only get the MMS from if i have those two split so yeah please let us know.
Click to expand...
Click to collapse
read the post above you, it does work, though personally i like them combined.
scotchua said:
Well first of all, most people probably just didn't answer because this question should have been a new thread in the rom DEVELOPMENT forum.
Second, to get split sms/mms you only need to install an older version of archsoft mms, like the one in my cabs folder linked in my signature. Make sure to soft reset immediately before you install the cab.
I never liked palm threaded text messaging, so i can't tell you if it works on wm6.1 roms, but all WM6.1 roms have threaded messaging already.
Both of these answers could have easily been found using the search function on the site.
Click to expand...
Click to collapse
No disrespect
But I DID that
Thats what I said i my post
Im no super noob, i been flashing hacking and unlocking for a minute
I just wasnt posting,
But all in all, from what i gather noone has been able to get the palm app working on kaiser, which baffles me. Why would it work on the hermes?
Im assumin becuase the palm and hermes have OMAP processors
And when the mms function checks for available emory to complete the operation it fails and gives an OUT OF MEMORY error
IMHO the palm app kills the wm6.1 on pure speed
ITS MUCH FASTER
But im gonna try again to install arcsoft mms 4.2.8.1 and see if that works
I wasnt quite sure if this belonged in development/hacking or the rom section, So my apologies on location
THANKS for the info!!
I LOVE THIS PLACE
tramane said:
No disrespect
But I DID that
Thats what I said i my post
Im no super noob, i been flashing hacking and unlocking for a minute
I just wasnt posting,
But all in all, from what i gather noone has been able to get the palm app working on kaiser, which baffles me. Why would it work on the hermes?
Im assumin becuase the palm and hermes have OMAP processors
And when the mms function checks for available emory to complete the operation it fails and gives an OUT OF MEMORY error
IMHO the palm app kills the wm6.1 on pure speed
ITS MUCH FASTER
But im gonna try again to install arcsoft mms 4.2.8.1 and see if that works
I wasnt quite sure if this belonged in development/hacking or the rom section, So my apologies on location
THANKS for the info!!
I LOVE THIS PLACE
Click to expand...
Click to collapse
Well to begin with, i meant it shouldn't be in the rom development, lol, but i think they moved it anyway to software.
I know there was a palm sms/mms app that was used on WM6.0 for the kaiser, but i never used it on WM6.1. I know many people used it cause it threaded the messages. You could try to hunt that down, just make sure you disable threaded messaging in kaisertweaks first just to be safe. Like i said, i've never tried it. If i find the link then i'll hook you up with it in a bit.
scotchua said:
Well to begin with, i meant it shouldn't be in the rom development, lol, but i think they moved it anyway to software.
I know there was a palm sms/mms app that was used on WM6.0 for the kaiser, but i never used it on WM6.1. I know many people used it cause it threaded the messages. You could try to hunt that down, just make sure you disable threaded messaging in kaisertweaks first just to be safe. Like i said, i've never tried it. If i find the link then i'll hook you up with it in a bit.
Click to expand...
Click to collapse
Thanx Scotchua
Hey i installed the new ROMeOS
it has split ms/sms
So i installed the palm threaded and use the palm for texting
And the wm6.1 default for mms
Works so far
There arent any wm6.0 roms left are there?
becuase there are speed enhancements with 6.1 correct?
tramane said:
Thanx Scotchua
Hey i installed the new ROMeOS
it has split ms/sms
So i installed the palm threaded and use the palm for texting
And the wm6.1 default for mms
Works so far
There arent any wm6.0 roms left are there?
becuase there are speed enhancements with 6.1 correct?
Click to expand...
Click to collapse
Well I'd really assume it's just because everyone is porting stuff from the diamond/xperia/omnia/raphael and all those are only wm6.1.
Also nobody wants to cook something old when there's something new. Plus they did add some enhancements related to screen rotation...mostly it's just the new and shiny thing...i never used wm6.0 much so i don't know.
hey everyone. I flash EnergyROM two days ago, and I'm facing a rather important bug that trouble me, I can't add a MMS server from Messages - All Messages - menu - Settings - Options - MMS server, when I click "new" to add a new MMS server, there is not any response, nothing happens. I wonder if some other guy who flash the same ROM is facing the same problem and how can I fix it? THX very very much!
Here is my machine's information, SE X1 with EnergyROM KOVSKY 20090914 StandardM2.5.
Shouldn't you ask this in the EnergyROM thread rather than start a new thread?
ipporek said:
Shouldn't you ask this in the EnergyROM thread rather than start a new thread?
Click to expand...
Click to collapse
I'm sorry but There are too many replies in EnergyROM thread..
i m having the same problem, but a little bit different, i can set up the mms server, but it does not work in any way, i was searching in registry and found many entries with HTCs servers, cingular servers, but i m brazil, and cant put the mms to work, even changing tre registry entries, but as i dont know very well how to manipulate the registry its still not working, both ways sending and receiving
MMS Issue with Energy ROM
Yeah.. I totally love this particular rom of all the ones out there and picture messaging hasn't worked for me either.. I'm U.S.-ATT
I've actually been sending via email as a work around because I like the rom that much.. Hope this does get resolved...
That problem is due to the leo message app? I have never really got mms working properly when using different roms with it cooked in. Try setting up the connection manually.
Well, i had already tested the jack4.x rom, MultimediaOS from KidDc(i think) and this perfect and bealtiful energy rom, and the only one that was able to send mms was the multimediaOS, but the ROM is ugly and still imature, no good for me...
Im using the operator TIM here in brazil...
if anyone has the solution...
I dont know too, if the energyROM already comes with arcsoft, or it attempts to send via other software(because in system/remove programs, it does not show nothing)
PS: in the multimediaOS the arcsoft version was 5.0.43.98, but neither google could find it...
here is the only solution :-
http://forum.xda-developers.com/showthread.php?t=556614
Regards
newstar said:
here is the only solution :-
http://forum.xda-developers.com/showthread.php?t=556614
Regards
Click to expand...
Click to collapse
THANKS. It really works. but with a pity that can't use HTC message, I love the beautiful looks.