At 56%, the desktop went to a blue screen and said an error had occurred and the system must be restarted. The screen asked if I had installed any new programs, check with the adminstrator, etc. The only program recently installed is the program for this ROM revision. When it crashed, the phone had a completion bar in the top 1/3rd, showing 56% completion. The rest of the screen was white. I restarted the desktop and was unable to establish a sync connection. I then preformed a hard reset on the phone. When it restarted, it showed 4 color bars, red on top, green, blue and white at the bottom. Since I cannot restablish a sync connection, how do I finish the modification. I am now concerned that I have "bricked" the phone. I am reluctant to try this mod on another phone until I can determine what went wrong.
Adding additional info
My phone is a G3, CID and SIM are unlocked, desktop is using Windows XP, SP2 and ActiveSync is Ver. 4.5.0
phone isnt bricked, your getting into bootloader fine. you need to turn it on, get it into bootloader i mean. if needbe press camera and soft reset (power button) then plug it in USB. You then need to flash your phone with the operator ROM, or the ROM you want to flash it with. Your phone is by far bricked, G3 ones are really difficult to ruin. I learnt that first hand
http://forum.xda-developers.com/showthread.php?p=1560272#post1560272
Think I may have done just that...bricked my phone. G3 wiza200, IPL/SPL 2.26
Cannot get it to read a usb connection at all. Help please?? Thanks in advance
jphuffs said:
At 56%, the desktop went to a blue screen and said an error had occurred and the system must be restarted. The screen asked if I had installed any new programs, check with the adminstrator, etc. The only program recently installed is the program for this ROM revision. When it crashed, the phone had a completion bar in the top 1/3rd, showing 56% completion. The rest of the screen was white. I restarted the desktop and was unable to establish a sync connection. I then preformed a hard reset on the phone. When it restarted, it showed 4 color bars, red on top, green, blue and white at the bottom. Since I cannot restablish a sync connection, how do I finish the modification. I am now concerned that I have "bricked" the phone. I am reluctant to try this mod on another phone until I can determine what went wrong.
Click to expand...
Click to collapse
hi
ur phone is certainly not bricked,cuz ur desktop crashed therefore the phone upgrade cudn't be completed,nothing to worry as long u can get to bootloader mode(Tricolor Screen)
Ok,listen, u do not require active sync connection,to flash a rom,do as I say and it'll be working fine,follow these steps to complete ur upgrade:-
1.Switch on,go to bootloader mode (Tri colored screen).
2.Connect usb cable to the phone and PC
3. After connecting usb cable,u will notice small 'usb' showing on the corner at the bottom of the bootloader screen of ur phone,if it shows,ur r ready to flash and upgrade
4.start the upgrade RUU_ rom u want the to upgrade with
5. complete the flash,let it reboot
let me tell u,u dont need active sync connection to upgrade
cheers
akashastrega said:
http://forum.xda-developers.com/showthread.php?p=1560272#post1560272
Think I may have done just that...bricked my phone. G3 wiza200, IPL/SPL 2.26
Cannot get it to read a usb connection at all. Help please?? Thanks in advance
Click to expand...
Click to collapse
hi
i have read ur situation at thread u have mentioned here,well i can assure u it's not bricked,cuz as sometimes it's able to go to bootloader mode.
The only problem to me seems the usb connectivety problem.
does it charge ?,if not then clearly it' a usb connectivity,if u can manage to get another usb cable and check out,hope it wud clear this doubt
zabardast_1 said:
hi
ur phone is certainly not bricked,cuz ur desktop crashed therefore the phone upgrade cudn't be completed,nothing to worry as long u can get to bootloader mode(Tricolor Screen)
Ok,listen, u do not require active sync connection,to flash a rom,do as I say and it'll be working fine,follow these steps to complete ur upgrade:-
1.Switch on,go to bootloader mode (Tri colored screen).
2.Connect usb cable to the phone and PC
3. After connecting usb cable,u will notice small 'usb' showing on the corner at the bottom of the bootloader screen of ur phone,if it shows,ur r ready to flash and upgrade
4.start the upgrade RUU_ rom u want the to upgrade with
5. complete the flash,let it reboot
let me tell u,u dont need active sync connection to upgrade
cheers
Click to expand...
Click to collapse
I just had this happen to me as well, I got stuck a 29%
Now when I get to bootloader it shows the IPL 2.26 and SPL 2.26 and also a RUU in the top right hand corner. Plug in USB and I get USB at the bottom left but then when I try to launch the RUU with the rom I want to flash I Invalid update tool, download new tool... It wont "Verify information on the device"
**EDIT
Nevermind, I just got Titanium to take... I may be ok... I think the RUU in the vanilla download I got is messed up or something...
Currently ripping through the rom update now. Damn I just got this phone yesterday I was gonna be pissed if I killed it.
Okay, I have the tricolor screen with IPL 2.25 on the left top of the red bar, SPL 2.25 on the left bottom of the red bar, RUU on the right top of the red bar and USB on the bottom left of the screen.
I push the camers button, do a soft reset and launch the ROM update. First window says "Verifying information on your PDA phone. Please wait." After a few moments I get a window that says "ERROR (300) This update utility cannot be used for your phone. Please get newer update utility."
If I try again, I get a window with "ERROR (264) CONNECTION" And an additional message about the USB connection not working. I am using a USB charge/sync cable and not a cradle.
What now?
jphuffs said:
Okay, I have the tricolor screen with IPL 2.25 on the left top of the red bar, SPL 2.25 on the left bottom of the red bar, RUU on the right top of the red bar and USB on the bottom left of the screen.
I push the camers button, do a soft reset and launch the ROM update. First window says "Verifying information on your PDA phone. Please wait." After a few moments I get a window that says "ERROR (300) This update utility cannot be used for your phone. Please get newer update utility."
If I try again, I get a window with "ERROR (264) CONNECTION" And an additional message about the USB connection not working. I am using a USB charge/sync cable and not a cradle.
What now?
Click to expand...
Click to collapse
ok when u swith on the phone what happens ?
does it go to bootloader mood ? or u force it to go bootloader by keeping camera button pressed and doing soft reset ?
well,after geting to bootloader mode,don't reset again just establish usb connectivity and when it show usb in the lower part of the bootloader screen launch ruu and start the flash.if it still stops with an error,post that error,then it means u had a bad flash or no flash at all.are you pretty sure you got it CID unlocked ?
tell you what you do,go to this link download WST tool and apply it,than post the data info it gives here,this will give the present status of your phone,ok
http://forum.xda-developers.com/showthread.php?t=329170
read this sticky:http://forum.xda-developers.com/showthread.php?t=298613
jphuffs said:
Okay, I have the tricolor screen with IPL 2.25 on the left top of the red bar, SPL 2.25 on the left bottom of the red bar, RUU on the right top of the red bar and USB on the bottom left of the screen.
I push the camers button, do a soft reset and launch the ROM update. First window says "Verifying information on your PDA phone. Please wait." After a few moments I get a window that says "ERROR (300) This update utility cannot be used for your phone. Please get newer update utility."
If I try again, I get a window with "ERROR (264) CONNECTION" And an additional message about the USB connection not working. I am using a USB charge/sync cable and not a cradle.
What now?
Click to expand...
Click to collapse
download the wizar-love rom
flash it using the ruu provided..
ftp://xda:[email protected]_Novii+CF2.rar
it should work.....
read this sticky
http://forum.xda-developers.com/showthread.php?t=298613
G4.1 Does you're device start normally (yes) or is it stuck on the three-colored bootloader screen (no)? YES... go to step G4.4, NO go to step G4.2
G4.2 Turn off you're device totaly. Remove the SD card and disconnect the USB cable from you're device. Turn on the device while holding the camera button. You will get into bootloader mode (3 colored screen). Connect the USB cable to the computer and you will see USB at the bottom of your screen above the left softkey (Activesync will not connect in bootloader mode, but you can flash from this screen!). go to G4.3
G4.3 Download wizard_love rom and flash it to your device. Your device should startup again after doing this. Go to G4.4.
G4.4 Is your device CID-unlocked (note: it's not the same as SIM-unlocked!)? YES... go to step G4.7, NO OR DON'T KNOW go to step G4.5. (note: CID-unlocking a G4 is only possible by paying for it at imei-check!)
G4.5 Download enable-rapi.zip. Transfer Cert_SPCS.cab and EnableRapi.cab to your phone. Run Cert_SPCS.cab FIRST and EnableRapi.cab SECOND. Turn your device off and on or wait 5 minutes before soft resetting. Done? Go to G4.6.
G4.6 Follow this great thread by the-equinoxe: [solution] G4 SoftSPL Flash any ROM to CID locked G4 [UPDATED] and load the softSPL on your device using his method. Make sure you take a G4 safe rom (see the thread for details). After the steps you'll have the rom of your choise on your device!
G4.7 You're reade to flash the AKU2, AKU3, WM6 rom of you're choise IF the rom DOESN'T contain IPL/SPL. AKU3 and WM6 roms normally don't contain IPL/SPL. If you want to flash an AKU2 rom, make sure you take the G4 version. If you get an error 300 (invalid update tool) while trying to flash your device look at this thread!
NOTE: If you tried to flash a G3 rom with IPL/SPL in the rom on a G4 you probably will have a bricked device! DON'T flash the new 3.08 and 3.09 IPL/SPL to your G4!
NOTE2: If you got problems flashing with softSPL: Follow this great thread by mun_rus: Solutuion found: how to flash any rom to CIDLOCKED DEVICE. If your device won't start after flashing you can use step G4.2 and G4.3 and try again. Also look at this thread by eddieitman: Faria G4 Step by step installer with instructions to make sure you did all the necessary steps!
Crashed during flash
It has been suggested that I download Wizard Service Tool. OK, I did that. The Wizard Service Tool says to connect to ActiveSync. Can't do that. Phone is locked in Bootloader. It boots up into Bootloader. Any action requiring ActiveSync won't work as long as the phone is locked in Bootloader. Any suggestions as to procedures at this point. Remember, that trying to flash the ROM at this point, I get a message 300 that says I need to get a newer update utility.
Crashed during update
It has been suggested that I flash with wizar-love rom. Did that. Got a message 300, my phone need a newer update utility.
jphuffs said:
It has been suggested that I flash with wizar-love rom. Did that. Got a message 300, my phone need a newer update utility.
Click to expand...
Click to collapse
go to the G4 section and look for the HardSPL thread. Once there get the MUNRUU file from first post and use it with the ROM you wish to flash as it might do the trick of the ERROR 300
crashed during flash
It was suggested that I go to G4, first thread, HardSpl and down load file, munruu. Didn't find any such file. Went to second thread, by mun_rus, but was unable to download file.
My 8125 is locked in bootloader and I don' know what to do.
I still need help!!
jphuffs said:
It was suggested that I go to G4, first thread, HardSpl and down load file, munruu. Didn't find any such file. Went to second thread, by mun_rus, but was unable to download file.
My 8125 is locked in bootloader and I don' know what to do.
I still need help!!
Click to expand...
Click to collapse
this is the thread. and the link is there......
http://forum.xda-developers.com/showthread.php?t=332320
or another thread with link...
http://forum.xda-developers.com/showthread.php?t=334796
jphuffs said:
It was suggested that I go to G4, first thread, HardSpl and down load file, munruu. Didn't find any such file. Went to second thread, by mun_rus, but was unable to download file.
My 8125 is locked in bootloader and I don' know what to do.
I still need help!!
Click to expand...
Click to collapse
download latest Official Rom from carrier official site, establish usb connection while in bootloader flash,it will start working,after that follow the procedure of unlocking and upgrade
or if you have put in Sdcard,remove it and then switch on the device,it might get ok.It's seen in many cases that some Sdcards create problem while upgrade and bootloader screen gets stuck,by removing it,it starts to work fine
good luck
(mestrini;1565518]this is the thread. and the link is there......
http://forum.xda-developers.com/showthread.php?t=332320
or another thread with link...
http://forum.xda-developers.com/showthread.php?t=334796)
My phone is a G3. These links are pretty adamant about being for G4 only
jphuffs said:
My phone is a G3. These links are pretty adamant about being for G4 only
Click to expand...
Click to collapse
I'm talking about the, so called, 'MUN RUU' which are the files used to upload the nk.nbf. You just have to replace those for the ones you're using now; NOT THE nk.nbf, just the others...
zabardast_1 said:
download latest Official Rom from carrier official site, establish usb connection while in bootloader flash,it will start working,after that follow the procedure of unlocking and upgrade
or if you have put in Sdcard,remove it and then switch on the device,it might get ok.It's seen in many cases that some Sdcards create problem while upgrade and bootloader screen gets stuck,by removing it,it starts to work fine
good luck
Click to expand...
Click to collapse
What is "Official Rom from carrier official site"?
The SIM card was removed.
Hope this helps
jphuffs said:
What is "Official Rom from carrier official site"?
The SIM card was removed.
Click to expand...
Click to collapse
For instance, if you are (like me) with TmobileUS, go to the Tmo site and go to the page that gives you the download to rom 2.26. I have that rom, if you are with Tmo, but won't be able to upload it until later...
http://tmobile.infospace.com/tmweb/...wnloadCenter/DeviceDownloads.aspx?deviceID=24
THAT^^^ is for TMOUSA...it is the official Tmo rom. If you are with cingular/att, you need to access their website and download their official rom, etc.
Related
Hi I'm hoping someone can help me with what appears to be a unique problem based on all the searches I've done.
I've been able to install ROM updates with no problem for a long time with my Cingular 8125, however recently I'm getting stuck on the bootloader screen. It's a little strange, but here's what happens:
1) From Windows, if I try to flash ROM using USB it gets as far as rebooting the device and bringing up the bootloader multicolor screen, and it says USB on the bottom as it should. From there I can't get to the device at all and the installer fails with a device connection error. All I can do then is reset and get back into the OS like normal.
2) With the SD card method, I get to the bootloader screen but it never loads anything from there, and again I have to reset and just get back into the OS.
I'm running IPL/SPL 2.26, using Molski's latest ROM, but now can't install any other ROM because of this.
Any ideas?
Thanks in advance
groggrog said:
Hi I'm hoping someone can help me with what appears to be a unique problem based on all the searches I've done.
I've been able to install ROM updates with no problem for a long time with my Cingular 8125, however recently I'm getting stuck on the bootloader screen. It's a little strange, but here's what happens:
1) From Windows, if I try to flash ROM using USB it gets as far as rebooting the device and bringing up the bootloader multicolor screen, and it says USB on the bottom as it should. From there I can't get to the device at all and the installer fails with a device connection error. All I can do then is reset and get back into the OS like normal.
2) With the SD card method, I get to the bootloader screen but it never loads anything from there, and again I have to reset and just get back into the OS.
I'm running IPL/SPL 2.26, using Molski's latest ROM, but now can't install any other ROM because of this.
Any ideas?
Thanks in advance
Click to expand...
Click to collapse
Just for everyone's information: I was able to resolve this by re-running lokiwiz and doing a SuperCID unlock...
Greg.
How did you make to lokiwiz recognize qtek?
My qtek shows:
First (and only) screen shows 4 color (red, green, blue, white), so according to posts on HTC-forum that must be boot loader.
On right upper corner of screen stands RUU
Line bellow, in the upper left corner shows IPL 2.26
Approximately 3 lines bellow still in the left upper corner of the screen shows SPL 2.26
When connect USB cable to qtek on the left down corner shows USB
I can acces to qtek via Multi-port/USB TTY ver. 1.11a, but when I start lokiwiz, even after long period of time nothing happens?
Please give us a precise procedure, nothing else didnt help
I cant believe this....I had no issues all day upgrading the ROM...until my PC overheated and shut off at 57%...
now when my phone starts up I see the 3 bars and it sais USB in the bottom left...but active sync is not connecting!
help!
what 3 bars?
a Red Blue Green Bars color?..
If that so.. you are too lucky..
I read a little more on the wiki:
Type 2a: When the phone boots, it goes directly to bootloader mode (tri-color screen)
This is what I have right now...I can't seem to get active sync to connect...although at the bottom of the screen it has "USB"
I have tried using mtty and dont think its diong anything...
Just stay in the bootloader (tri-color screen) and make sure the "USB" is shown in your device screen..
The reflash.. even if its not sync/connected.. just reflash the ROM..
Everything will be fine..
wow....i think it may actually work....that was SCARY.
nice to know the good ole button flash works when all others fail
I just want to make a clarification..
You are just flashing your device and when the upgrade process is on 57% your computer suddenly shutoff? and the upgrade was cut..
What happened next? did you reset the device then went to tri-color screen? or you just force bootloader mode it?
Yeah pretty much exactly what you said. I literally got up for a second to get some water, came back and saw the telltale sign that my pc had just shut itself off (the screen was black except for the standard boot junk that shows up).
So I look at my device (8125) and it was locked at 57% and was not responsive. I figured that the flash util probably wouldn't continue after the computer started back up (and besides, the device wasn't alive anymore) so I rolled the dice and unplugged the USB and took out the battery. When I put the battery back in and hit the power button, it went straight to the bootloader (the tri color screen).
- By the way - ive got the button image on here now - workin like a champ...
tnx for the explanation..
have fun!!..
thanks for the quick reply - i thought i was completely stuck but the button flash seemed to take care of everything. Makes me almost think that bricking this thing is near impossible... >
Yup!.. that also my conclusion.. its impossible to brick.. thats why i ask for your clarification..
What is this "button flash"? I am stuck in RGB boot mode with no activesync connection. I have read til my eyes crossed, but can not fix my 8125 (G3)!
Please advise.
How about more information? On your bootloader (Rainbow screen) what does it show the IPL / SPL to be? What were you trying to do when you got into this situation? What happened when you were flashing? Is your device a G3 or G4?
Safest thing for you to do right now is to flash your carrier's rom onto the phone (an official shipped ROM). With your phone in the bootload, just run the ROM and it will install (DO NOT RUN A CUSTOM ROM AT THIS POINT SINCE YOU HAVEN"T TOLD US ANY OTHER INFORMATION).
G3 8125
ipl/spl 2.25
Was trying to use faria's latest rom...got stuck at 99% for almost one hour, so I rebooted computer and discon'd the wizard. Now it will boot to rainbow screen and will not connect via activesync (so I can't utilize any other roms to get back to square one).
ActiveSync will NOT connect when you are at the boot loader. As long as you see USB in the bottom left of your phone (above the left soft key) then you can flash your original Cingular ROM and be good to go again.
brick, brick, brick
It happend to me too with faria´s new crossbow rom:
the device freezed at 99% and I reseted it then....nothing happend- bootloader mode: red green blue + usb... but no chance to flash ANYTHING... always the same message:ERROR (260) update error, no connection to the device...???
I tried the O2-mini s update, and the faria rom, no chance just a brick
I need help....
Hunter6 said:
It happend to me too with faria´s new crossbow rom:
the device freezed at 99% and I reseted it then....nothing happend- bootloader mode: red green blue + usb... but no chance to flash ANYTHING... always the same message:ERROR (260) update error, no connection to the device...???
I tried the O2-mini s update, and the faria rom, no chance just a brick
Click to expand...
Click to collapse
Why did you reset it??? All roms freeze. The screen that is flashing the ROM even says it can take up to 10 mins. If you don't get an error onthe PC then DON'T stop the flashing process.
Go get a copy of your carrier's official ROM (not a custom one, but an official one from your carrier.). Then with the phone at the boot loader (Rainbow screen) and the USB cord plugged, in, run the official ROM. If that doesn't work, then get a copy of the Wizard Love rom and flash it (You'll need to find links around here for it, or pull it via PirateBay). You may also want to reboot the PC you are running on and remove your SD card (if you have one) just to remove variables that can play in to all of this.
Good luck
mfrazzz said:
Why did you reset it??? All roms freeze. The screen that is flashing the ROM even says it can take up to 10 mins. If you don't get an error onthe PC then DON'T stop the flashing process.
Click to expand...
Click to collapse
Ten minutes is understandable, but mine stalled for about an hour at the 99% mark. Even my PC would not respond. Is that normal for a rom upgrade?
-----
I was finally able to reset my 8125 to the Cingular ROM. Not sure why I couldn't do it on my PC, but after moving over to my wife's PC I did not have any problems.
Thanks!
brick, brick, brick
o.k. boys, now it is a nice little crossbow brick from faria.....and I can make telefon-calls with my brick.
thanks a lot for your help
entdiablo said:
Ten minutes is understandable, but mine stalled for about an hour at the 99% mark. Even my PC would not respond. Is that normal for a rom upgrade?
Click to expand...
Click to collapse
No, that sounds like your pc locked up or something (I'd blame windows on that one )
I was finally able to reset my 8125 to the Cingular ROM. Not sure why I couldn't do it on my PC, but after moving over to my wife's PC I did not have any problems.
Click to expand...
Click to collapse
Glad to hear you got it going. Good luck and be careful out there!
Hunter6 said:
o.k. boys, now it is a nice little crossbow brick from faria.....and I can make telefon-calls with my brick.
thanks a lot for your help
Click to expand...
Click to collapse
Sorry, I may be missing your humor or sarcasm... Are you saying its dead (if so, give more details about what it does or doesn't do, IPL/SPL it shows (if it turns on), etc... If its now working, then congrats!
hi all,
i uploaded my g3 with this rom Molski.Biz_AKU3.3_21911_8MB_Crossbow.exe. in the beginning everything is normal. it normally finished upgrading. then it restarted automatically, but my g3 didnt open. it shows always bootscreen. ipl and spl both 1.03.
i read almost all forum. when i try hard reset it says "format is ok" but nothings change.
and when i try upgrading with another roms. it gives ERROR 260 NO CONNECTION.
how can i fixed it? pls help me.
read the flashing tutorial..
Start in bootloader
kill activesync *(wcescomm process in taskmanager)
reflash..
BTW WM6 requires 2.X IPL/SPL !!!
If you read almost all the forum, you must have missed a few pages. The reason it won't start up is because you have an IPL/SPL of 1.03. With the phone off and connected to the usb cable, press and hold the camera button and then press the power button. Don't release the camera button until you get a 3 colored screen. That's the bootloader. Now flash an official ROM such as T-Mobiles 2.26 to get your IPL/SPL to at least 2.xx (if you flash T-Mobiles ROM they will be 2.26). After you do that you can flash Molski.Biz's ROM or any other ROM of your choosing.
I just want to add to all the correct things said here that sometimes "No Connection" errors come from low voltage battery. Be sure to have it fully (or almost) charged!
xeno1 said:
If you read almost all the forum, you must have missed a few pages. The reason it won't start up is because you have an IPL/SPL of 1.03. With the phone off and connected to the usb cable, press and hold the camera button and then press the power button. Don't release the camera button until you get a 3 colored screen. That's the bootloader. Now flash an official ROM such as T-Mobiles 2.26 to get your IPL/SPL to at least 2.xx (if you flash T-Mobiles ROM they will be 2.26). After you do that you can flash Molski.Biz's ROM or any other ROM of your choosing.
Click to expand...
Click to collapse
i did all what you said. ecxept trying the t-mobile 2.26 rom. coz i couldnt find it. i got 3 colored screen and i tried another rom and it gives sama error (260 ERROR) it is look like has no connection so rom update couldnt find ppc
Look here for T-mobil 2.26
http://forum.xda-developers.com/showthread.php?t=310831
no it didnt work. as i said when in 3 colured screen, there is no connection between my computer and ppc. so it always gives same error: ERROR 260. it says "no connection" check usb cable etc.
by the way there is no problem with usb cable.
i think there is another method to rom update. can i copy any rom to my sd card by using ntrw.exe.
do you think it is work. if it is so, can anyone explain me details
thnx
hi forum members(people who have the best knowledge about pocket pc).
i dont know what i did but my wizard is working now. i did what i alwyas did before, i mean in serial mode i tried to update wizard, today i want to try again then it is ok.
thnx for helping....
I have a stuck image on my 8125. The phone "boots" but only shows a white screen, and is unusable.
The "a2sd all" restore option mentioned in the forums doesnt work for me. I have read on several forums that I should be able to reflash the OS from the bootloader, though I cant find any instructions on how to do this
Could someone point me in the right direction for how to flash an OS VIA bootloader?
Thx
1. Get the phone to bootloader (tree color mode) - I think by soft resetting and pressing the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Now you can flash your provider's ROM without any problems
I am not sure whether the bootloader flashing is possible from Windows Vista.
You must flash normally (in bootloader you cannot use either shelltools or SoftSPL - so use your provider's ROM).
Mirek
Mirek - not to be totally ignorant, but the step 4 is what I'm having problems with .... where can I find either a providers ROM, or something that I can actually use while in bootloader mode?
Thanks!
NM ... Found it!
For anyone reading this .... You can get the provider ROM for the 8125 from HTCAmerica here: http://www.htcamerica.net/support/8125/software-downloads.html
Thanks for your help!
mirekluza said:
1. Get the phone to bootloader (tree color mode) - I think by soft resetting and pressing the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Now you can flash your provider's ROM without any problems
I am not sure whether the bootloader flashing is possible from Windows Vista.
You must flash normally (in bootloader you cannot use either shelltools or SoftSPL - so use your provider's ROM).
Mirek
Click to expand...
Click to collapse
Dear Readers,
I'm having problem with my Dopod 900(,Qtek 9000,HTC Universal,O2 Xda Exec,Jasjar ). Can somebody please tell me what to do?
Before this, every time somebody called, the PDA lost the network bar and start to search or network and reject the calls automatically and also i wasn't able to send SMS. Now, i tried to install WM6 crossbow, the phone even cannot be on !!! even when i connect it to the charger, even the light will not be on. the only page that i can see is a white page asks Press 0 to Restore factory default or press X to exit. either perss 0 or X, the phone will be off and i cant turn it on with power key....
Please tell me what can i do ?? I really need your help.
PLEASE REPLY, PLEASE.
[email protected]
Warm Regards to All
G-Jorji
brick?
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
acuraholic said:
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
Click to expand...
Click to collapse
WHAT did you downgrade from?
Did you re-unlock your G3?
How's your battery?
acuraholic said:
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
Click to expand...
Click to collapse
IPL/SPL 2.08? Does that exist? Do you mean 3.08?
Are you sure your device is a G3? Or you killed it when flashing Button's ROM?
A while ago I tried to Flash a version of WM6 from mfrazzz on my wizard. The installation seemed to go ok, but when I boot it up i coudn't get past the second splash screen. I thought the phone was a gonner until last night, when I gave it another shot putting on Button ROM. I followed these instructions and it worked. The instructions also had me unlock the phone, and that worked fine too. after that I tried updating my IPL and SPL, Right now my IPL is 1.05 and SPL is 3.08
After this I tried unsuccessfully to get WM6, I think I started off trying Faria.
(So here is the actual problem)
After I tried installing Faria unsuccessfully, I couldn't get Button ROM back up. I'm stuck on the second splash screen (picture of a mug of beer in front of the Colosseum). I've tried flashing my phone w/ everything i've got, including button ROM and Love, and nothing works. most of the WM6 Update Utilities won't even connect. Button Rom connects, stalls at 98%, finished and says it was a success, but I'm still hung up on the Splash.
(I'm running WinXP w/ SP2)
I really just want something running on this phone, don't care what it is.
Thank you for your time
Download official stock rom to recover back and download WST_4.2.2 to verify the CID lock/unlock status,most probably its still CID locked.or you can even reflash 'Button's Rom' again.
No, I've tried to reflash button rom many times. It says it works but it gets hung up on the splash. Since I can't get anything to run on it WST won't work (I think)
Yes! WST only works on a working OS,have you tried to flash the official stock rom ?
Don't activesync or establish partnership,better if you altogether disable & close activesync and end process 'WCESCOMM.EXE' in the Task Manager and try to end as many applications running at the background.Don't surf the net,disable all anti virus and firewall.
Simply get the phone into Bootloaders mode,hook up with pc via usb cable,watch small usb appear at the bottom of Bootloader screen and run the Rom,hope it'll work.
hEY ZABARDAST
zabardast_1 said:
Yes! WST only works on a working OS,have you tried to flash the official stock rom ?
Don't activesync or establish partnership,better if you altogether disable & close activesync and end process 'WCESCOMM.EXE' in the Task Manager and try to end as many applications running at the background.Don't surf the net,disable all anti virus and firewall.
Simply get the phone into Bootloaders mode,hook up with pc via usb cable,watch small usb appear at the bottom of Bootloader screen and run the Rom,hope it'll work.
Click to expand...
Click to collapse
I did this when my Wizard stucks on the splash...
Get mtty 1.04 i thin i dont remember exactly but the higher i ever saw.
kill process wcesscom in PC
conect the ppc on Bootloader
click on conection it shows USB if not... start up again the process
then a white screen appears
I type: task 28
then it works a little on some memory directions
I type: task 28 55aa [or something] (its better get the info on wiki cause it works on chip directly)
without unplug the PDA starts the RUU again...
It works for me...
This is a process for HTC Universal but it works on Blue angel and Wizard for sure!
wait a little i will confirm the steps and the exactly words to type in.
you might need clean the ROM or your flash ROM is overcooked.
I can repair your phone !
+ Que PPC said:
I did this when my Wizard stucks on the splash...
...
wait a little i will confirm the steps and the exactly words to type in.
Click to expand...
Click to collapse
Hey + Que PPC!
Have you confiirmed those values? And is your Wizard CID unlocked?
This would be great to confirm working so that all those with CID locked devices could get their phones back - without paying IMEI-check.co.suckourmoney.uk
@ twig2256
If your phone is CID unlocked try Drugstore's method of recovering Splash Screen frozen phones
cheers
YES
The values are the same for every DOC CHIP
When the MTTY conects to USB type exactly this...
task 28
(then it will work formating and cleaning the DOC
then it says succesfully clean
and now type...
task 28 55aa
it again works on the same process you can close the mtty without unplug your device... update your device with a Stock rom.
Actualy I have issues with mtty i dont know why i can acces to USB it say CMD GOD Damn can anybody helps...
This is the link that mestrini said for drug gsm store metod to unfreeze
http://forum.xda-developers.com/showthread.php?t=276963
Hey mestrini see this...
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
even if it is universal it work for Wizard i did it once it works for me. but now it wont why????
zabardast_1 said:
Yes! WST only works on a working OS,have you tried to flash the official stock rom ?
Don't activesync or establish partnership,better if you altogether disable & close activesync and end process 'WCESCOMM.EXE' in the Task Manager and try to end as many applications running at the background.Don't surf the net,disable all anti virus and firewall.
Simply get the phone into Bootloaders mode,hook up with pc via usb cable,watch small usb appear at the bottom of Bootloader screen and run the Rom,hope it'll work.
Click to expand...
Click to collapse
can't solve my t-mobile mda