The guy at ATT store said last week when I bought my Tilt that in order to use it with my laptop I had to pay the extra ($59/month plan instead of the $39 I was hoping for) for my unlimited data plan.
My question is, if though I have the username and password (cause I called them for it) and am using the HTC ROM (instead of the ATT one), do I still need to be paying extra for the "TETHERING" service?
Thanks guys
Nope. Just need to connect your phone using the Internet Sharing program, and you should be good to go.
Blowfish64 said:
Nope. Just need to connect your phone using the Internet Sharing program, and you should be good to go.
Click to expand...
Click to collapse
That is not necessarily true. If your data usage pattern (IE, large amounts of data) indicates you are tethering, you will get popped for excess data usage. If your tethering is light, then you should be alright.
Don't assume you can hook up your laptop and go to town web surfing.
While that is true, I think they're pretty lenient with it. I had around a GB of data one month and they didn't care. But yeah, keeping it under the radar is a good rule.
wanted to ask about this
With the 3125 I have I was able to use ICS with the 20 dollar media plan or whatever. I work for different companies and I would use that to get to the net privately. Anyway, I went to another company and I couldn't get ICS to work on that network for some reason.
I'm a developer so I compiled up an internet proxy server to run on the phone. So basically when activesync is not active I could run the server and set my browser to that proxy server. Anyone know if that could avoid tethering? I don't have the proxy running on my Tilt yet. I was going to put a nicer UI on it. I'm wondering if anyone around here would have a use for it.
att as of right now has not been able to catch people tethering other than by exorbant data usage (obviously d/ling 20 GB a month on your kaiser without a tethering plan is going to get you caught), but if it wouldnt take you too long im sure there are a lot of people here who would have a use for that.
adam.hodge said:
With the 3125 I have I was able to use ICS with the 20 dollar media plan or whatever. I work for different companies and I would use that to get to the net privately. Anyway, I went to another company and I couldn't get ICS to work on that network for some reason.
I'm a developer so I compiled up an internet proxy server to run on the phone. So basically when activesync is not active I could run the server and set my browser to that proxy server. Anyone know if that could avoid tethering? I don't have the proxy running on my Tilt yet. I was going to put a nicer UI on it. I'm wondering if anyone around here would have a use for it.
Click to expand...
Click to collapse
I dont follow... ICs is for when you are out and about and want to use your laptop over your phone's data connection... so unless your new company arent paying for any data, then it will work regardless.
And apart from excessive data usage, the only way a network could potentially check up on tethering is if you use it for weird and wonderful things and thus use different ports.
no i'm talking about the local machines network. for some reason ics would not work there. so i run a proxy server on the phone. That worked for internet access without using the modem OR ics.
I rarely tether so data usage will probably not be an issue. The thing is on the rare occasion when I do I don't want to have to pay an extra $20/month. That is BS...
I just took a very rare road trip over the weekend and tethered using ICS so we'll see what happened when the bill comes next month.
h0mersimps0n said:
I rarely tether so data usage will probably not be an issue. The thing is on the rare occasion when I do I don't want to have to pay an extra $20/month. That is BS...
I just took a very rare road trip over the weekend and tethered using ICS so we'll see what happened when the bill comes next month.
Click to expand...
Click to collapse
Please post the result when you get your bill. I am a IT person and once in a while I need to RDP to the office to fix something while I'm on the road. I really don't want to pay $20 more every month for those rare cases.
Blowfish64 said:
Nope. Just need to connect your phone using the Internet Sharing program, and you should be good to go.
Click to expand...
Click to collapse
Was this application removed from the Tilt? I am not seeing it in Programs, Tools, or Settings. Thanks.
madmatt079 said:
Was this application removed from the Tilt? I am not seeing it in Programs, Tools, or Settings. Thanks.
Click to expand...
Click to collapse
Check your comm manager.
DeniaL said:
Check your comm manager.
Click to expand...
Click to collapse
You won't find it under Comm Manager or under Settings... Connections. AT&T has hidden the program (deleted the shortcut), but it's still there, and it works just fine:
Create a shortcut in \windows\start menu\programs (or wherever you want to put it) for the following program:
\windows\IntShrUI.exe
Run it, and you're done.
AT&T settings
H0mersimp0n what are the settings youare using that at&t gave you, I have another post on this forum looking for those. Any help would be great!
Thanks
From a technology standpoint, you will be able to tether with pretty much any AT&T data plan. However, the issue is that doing so is technically a violation of the terms of service. (AT&T goes so far as to single out tethering as being prohibited, unless you are paying for a tethering plan.) In practice, I think most people have found that AT&T tends not to enforce this provision unless your data usage is ridiculously high - at a level that, based on their estimation, is just not consistent with handset use. This is pretty subjective and I think that if anyone got flagged for high usage, it would still be AT&T's burden to "prove" the tethering. (Having said that, while that person might be able to fight against being charged per KB, AT&T might still be able to cancel the contract, anyway)
If you take AT&T's terms of service literally, the vast majority of the data usage on a PDA would be prohibited. From their perspective, only web browsing, checking email and streaming media content that you bought from them would be permitted. Let's see how long AT&T keeps its smartphone/PDA customers if they start enforcing these terms literally.
goestoeleven said:
You won't find it under Comm Manager or under Settings... Connections. AT&T has hidden the program (deleted the shortcut), but it's still there, and it works just fine:
Create a shortcut in \windows\start menu\programs (or wherever you want to put it) for the following program:
\windows\IntShrUI.exe
Run it, and you're done.
Click to expand...
Click to collapse
For anyone who needs it, the shortcut should be set to: 41#:MSINTERNET_SHARING?:intshruiapp
And to make it worse, AT&T is jacking with the prices for all internet service through the phone.
Personally I think that internet through Cell networks should be dirt cheap. Why? No "last mile" copper to mess with. The "last mile" is the copper to your house is a pain in the you know what for most provider companies to deal with. It is the highest expense for them. With cell networks, there is no "last mile" and much lower costs for them to keep the network running. Put that with the fact that cellular networks are so much slower than broadband so their connectivity costs are much lower than DSL and Cable. Bottom line is AT&T and others are making a KILLING on network access. The cellular bandwidth is very broad and can handle the data quite easily if more folks were using it real time for access. In the end it probably wouldn't even jump more than 10%, of which they are ready to handle right now.
Let them know you don't appreciate their pricing. It won't get better if we accept things as is.
Personally, I would have liked for this company to have taken off, if it weren't for the feds. http://www.news.com/8301-10784_3-9770197-7.html Damn the man!
New to AT&T
h0mersimps0n said:
The guy at ATT store said last week when I bought my Tilt that in order to use it with my laptop I had to pay the extra ($59/month plan instead of the $39 I was hoping for) for my unlimited data plan.
My question is, if though I have the username and password (cause I called them for it) and am using the HTC ROM (instead of the ATT one), do I still need to be paying extra for the "TETHERING" service?
Thanks guys
Click to expand...
Click to collapse
I just got my Tilt and am new to AT&T. I am trying to setup tethering. With my old cellular ISP (Cellular South) I was able to setup my WM5 pda phone as a modem pretty easily.
I am not sure what my username and password is or what do enter to "dial".
With CS ISP the phone and the wireless modem setup just dialed #777.
Can some please point me in a direction?
Thanks!
If you do a hard reset on the tilt and soft reset before the customer configuration takes place, internet sharing icon will appear in the "Programs"
Internet Sharing
Does anyone have any experience with the "Wireless Modem" feature on the new AT&T Tilt?
It appears to offer the same function as Internet Sharing utility but I can't seem to make it work... Anybody know what the heck this Wireless Modem feature is and how to use it with our PDA Unlimited Plan?
I messed with it on my notebook when I was on the road and had no success at all with it...
Sincerely,
Charlie
Related
I've heard of a few friends getting bluetooth PAN tethering with only the standard non-tethering data plan ($40/45). Has anyone succeeded in doing this? I would try to figure it out myself, but all the bay area stores are sold outof the Tilt.
You can tether with any data plan. You can tether via USB or BT. I have the MediaMax plan, and tether with my Kaiser (and I did with my 8525 and Blackjack before them).
Now whether it is allowed or not is a different story. But, technically, it works with no issues.
you can tether any device without tethering package
They don't want you to because of the large data downloads, I say go ahead just don't go bragging about it our the may try to audit your acct.
jomo25 said:
You can tether with any data plan. You can tether via USB or BT. I have the MediaMax plan, and tether with my Kaiser (and I did with my 8525 and Blackjack before them).
Now whether it is allowed or not is a different story. But, technically, it works with no issues.
Click to expand...
Click to collapse
I should note that at least one of the other people that got it to work without a proper tethering plan was in the same situation as you: they started out with a Blackberry, and then just didn't switch plans to another plan.
For new Tilt owners, AT&T offers a handful of plans, all under the "PDA" plan family. "PDA Personal Max" is $40, and doesn't include tethering, "PDA Personal Max - Tethering" does, but is a ridiculous $70.
Has anyone gotten tethering to work on a new AT&T non-tethering plan? What happens if you try to connect to the phone via PAN without the tethering plan? I wonder if a hacked ROM could fix this, if it's blocked by software on the phone.
I use a program called PDANet. It's like $30 but well worth it because it can save you a lot of money. http://www.junefabrics.com/pdanet/index.php
It more or less makes it appear as if your data is coming from your phone instead of your laptop.
lithboy said:
I should note that at least one of the other people that got it to work without a proper tethering plan was in the same situation as you: they started out with a Blackberry, and then just didn't switch plans to another plan.
For new Tilt owners, AT&T offers a handful of plans, all under the "PDA" plan family. "PDA Personal Max" is $40, and doesn't include tethering, "PDA Personal Max - Tethering" does, but is a ridiculous $70.
Has anyone gotten tethering to work on a new AT&T non-tethering plan? What happens if you try to connect to the phone via PAN without the tethering plan? I wonder if a hacked ROM could fix this, if it's blocked by software on the phone.
Click to expand...
Click to collapse
I wonder why the rep I spoke to told me that of all the PDA plans, all included tethering? I was fighting tooth and nail to get the PDA unlimited + 1500 SMS / free M2M messaging but was unable to because "the IMEI for the Kaiser is being reported as an unknown device".
I ended up having to get the PDA Personal Unlimited + shared unlimited messaging for my family plan. Anyway, PDA Personal Unlimited is supposed to have tethering included.
Can't get PDAnet to work. Looks like it uses same style to connect as when I use the connection wizard anyway. I doubt this program subverts cingular's ability to tell what is using what data connection...
Anyway, I googled around and tried the different usernames and passwords and APN's I found but no luck with PDAnet...
any suggestions anyone?
What about USB Modem by Mobile Stream?
It worked well with my PPC-6700....
http://www.mobile-stream.com/usbmodem_wm.html
Data plans have NO bearing on whether your phone can tether or not. If data access is enabled on your account with any plan in place you have the "ability" to tether, but not necessarily "permission". It doesn't matter if it is a pay as you use it or a full laptop connect plan. For those that are tethering without the proper data plan it is like driving without a seat belt. You may have driving for hundreds of miles without anything happening, but one day......
For the Tilt, the program Internet Sharing works like a champ. Just launch it, click connect, and plug it up to your computer.
Download this cab to install it.
For the Tilt: There is no need to install it. The IntrShr.exe or something similar is right in the \Windows directory. Just make a shortcut to your start menu for it.
laakness said:
For the Tilt: There is no need to install it. The IntrShr.exe or something similar is right in the \Windows directory. Just make a shortcut to your start menu for it.
Click to expand...
Click to collapse
Correct, but the cab just makes it easier for a noob.
am i doing somehing wrong becaus it askes for a username and password. It is like I am trying to dial up or something..
I am an idiot. I enabled the dialup network... which ATT told me to do. JERKS!. in anyevent, you must enable the PAN network then it works AWESOME... My speeds are excellent too. about 800-1300 down and about 300-500up... PERFECT...
thanks XDA
Internet sharing on my Kaiser/TyTn II works like a champ and quite easy to set up...Your provider, in my case ATT, might and some say will notice large amounts of data use so beware of that. They will audit and go after your money in that case. I dont use it frequently even though I have unlimited data plan with Media Net for the overpriced amount of $39.99...geeee I'm really glad they don't charge me $40.00
I know I read somewhere u can use ur wifi and not ur at&t internet as a modum if u turn off the phone at&t will never know anyone else reaed this and if so know where it is? thanx
I come from the Verizon world, where you could not authenticate through tethering unless you paid the extra $15/month. (But PDANet did work just fine). I have seen posts (albeit older dates) that claim people were charged heavy data rates for tethering when they did not have a data plan that included it.
I am using a Tilt and have the $59.00 Tether data plan. I am able to tether using either APN: wap.cingular or isp.cingular.
My friend has a Tilt with the $49.00 data plan without tethering (but with SMS). I tested his phone and could only get it to connect using wap.cingular for tethering.
So my questions are:
1) Do I actually need the tethering plan or can I reduce my plan and use wap.cingular? (I know it works but it leads me to the next question)
2) If you use wap.cingular without the tethering plan will you get charged the outrageous data rates?
3) What is the actual difference between the two APN's?
Thanks for any info you can provide!
SC
#1 and #2. For tethering legally, yes, you must have laptop connect. With Internet Sharing on the newer phones, it makes it harder for AT&T to prevent you from doing this (without being charged), but they most likely will eventually get you.
For #2, see this thread, specfically the crumbfire post. He explains it excellently:
http://forums.wireless.att.com/cng/...thread.id=47397&view=by_date_ascending&page=2
Hi:
I have searched and searched with no luck. I am on an ATT Tilt, and would like to use PdaNet to connect PC to internet through phone. I have yet to be able to get it to work properly. I get dial up error=721 (state=8193). I used PdaNet on my Treo 750 (which I had prior to the Tilt), and it worked perfectly, so I'm just not sure what I'm doing wrong.
Any ideas what the problem could be?
I am on an unlimited pda plan, but don't want to incur additional charges (such as the tethering plan), for very minimal, occasional tethering use, so ideally I would like to connect in a way that I won't be "caught", lol.
Any help would really be appreciated!
I'm use Internet Sharing via Bluetooth or USB to connect my laptop via my phone for Internet access. This is without a tethering plan from AT&T. The plan I have is $39.99/month, however they have a cheaper plan - MediaNet w/unlimited Data and 200 TXT MSG. Others have been using this plan without any issues. I ma venture to try this soon.
cincy1020,
For your problem with dial-up, you're not adding a modem via your pc. Try it with the USB cable first -- go to Internet sharing on the phone and select USB and click Connect. Connect your USB cable to your laptop and it should detect a network card and get an IP address. No need for dialup. You will have to install Active Sync on your laptop (I find it easier).
I think you're trying to use a modem which will probably require a tethering plan and that's probably why you're having the dialup error.
cincy1020
Well here's the deal for GPRS. You do not need PDANet. So give your license to someone who is still on CDMA somewhere. You first need to install the driver for the HTC Kaiser/Tilt as a USB Modem. A few forum searches will find the inf to install in windows. Then you simply set up a DUN connection using that USB modem. The number should be *99# and make sure to add this line as extra init options:
ATZ+CGDCONT=1,"IP","ISP.CINGULAR"
For Bluetooth, first you need to install the latest Toshiba Bluetooth Stack for Windows. Don't use the microsoft one. Then just set up a BT Dun connection with the same settings.
Hope that helps...
i've seen a lot of posts about this subject and i'm clueless, now i read the thread form the link provided above and it helps a little, but were do look on my phone to find out what i have? also for at&t users, what's the difference between media max 200, the 19.99 plan and the data connect 39.99 plan, i know the text messaging etc and both are unlimited data, and you "can't" use media max w/a tilt even i've heard you can, but in terms of using the internet and surfing the web what's the difference. Thanks
eras2r said:
cincy1020
Well here's the deal for GPRS. You do not need PDANet. So give your license to someone who is still on CDMA somewhere. You first need to install the driver for the HTC Kaiser/Tilt as a USB Modem. A few forum searches will find the inf to install in windows. Then you simply set up a DUN connection using that USB modem. The number should be *99# and make sure to add this line as extra init options:
ATZ+CGDCONT=1,"IP","ISP.CINGULAR"
For Bluetooth, first you need to install the latest Toshiba Bluetooth Stack for Windows. Don't use the microsoft one. Then just set up a BT Dun connection with the same settings.
Hope that helps...
Click to expand...
Click to collapse
Hi:
Thanks for the reply. I already have WModem installed by default. Is this the same thing?
Thanks!
Just use internet sharing. No need to configure a dialup modem/etc.
brainlb,
There doesn't seem to be much difference between the two plans you mentioned. I spoke to AT&T about this and they told me since I have a PDA phone I need the PDA connect plans and according to their system the MediaMax 200 is not compatible with my phone. However, a few people in the forums said they are using the MediaMax 200 plan without any problems. I may try this one day but not sure as yet.
so were on my phone do i look to find out whether i have .wap or .isp, or something else? Thanks
SORRY TO THREAD JACK BUT,
I JUST WANT LIVE UPDATES ON MY PHONE, MOSTLY WEATHER ON MY BACKGROUND. WOULD I NEED THIS?
http://www.wireless.att.com/cell-ph....jsp?LOSGId=&skuId=sku950103&catId=cat1510009
OR COULD GET A SMALLER DATA PLAN AND UPDATE EVERYTHING WHEN I CONNECT. WHAT IS THE BEST PLAN WITHOUT TETHERING?
Technically its supposed to be a PDA plan for our phones, However, I added the following plan to my sons phone and its been fine .. He doesn't pull tons of data so it hasn't flagged anything. If you don't need text messaging included then I'd look at the following:
Smartphone Connect Unlimited $19.99
http://www.wireless.att.com/cell-ph...jsp?LOSGId=&skuId=sku1040059&catId=cat1510009
I chose that over the MEdiaNet plan as I figured it would cause less suspicion with the data being used.
PsyOpWarlord said:
Technically its supposed to be a PDA plan for our phones, However, I added the following plan to my sons phone and its been fine .. He doesn't pull tons of data so it hasn't flagged anything. If you don't need text messaging included then I'd look at the following:
Smartphone Connect Unlimited $19.99
http://www.wireless.att.com/cell-ph...jsp?LOSGId=&skuId=sku1040059&catId=cat1510009
I chose that over the MEdiaNet plan as I figured it would cause less suspicion with the data being used.
Click to expand...
Click to collapse
THAT PLAN SAYS YOU ARE CHARGED FOR THE DATA YOU SEND AND REVIEVE. WHAT IS MEANT BY DATA SENT AND REVIEVED?, DOES THAT MEAN DOWNLOAD, AS IN RINGTONES?
I JUST TALKED WITH A REP FROM AT&T. THEY TOLD ME THE SMARTPHONE CONNECT UNLIMITED ISN'T FOR THE TILT. ( <AS STATED BY WARLOARD, WHAT PHONE DOES YOU SON HAVE? )
CAN I GET THAT ON MY TILT ANYWAY, AND GET A FAMILY TEXTING PLAN
LIKE THIS, THEN I SHOULD HAVE UNLIMITED DATA AND MY WHOLE FAMILY HAS TEXTING.
http://www.wireless.att.com/cell-ph....jsp?LOSGId=&skuId=sku980095&catId=cat1470003
I have a Tilt and am on a unlimited data plan. Now there is a legal way to tether that Att doesn't tell you about. Current plans selling at the ATT stores have PDA MEdia Connect with messaging. Starting at 39.99 and goes up from there with some referring to tethering. if you do not have a tethering plan you cannot connect to isp.cingular or suppose to. I called up ATT about a issue I had with VOIP needing to access a full internet instead of a wap.cingular proxy internet cause I was on the PDA Media Conenct plan. That how I found out about another plan called PDA Connect Unlimited for 39.99 without messaging that allows wap.cingular and isp.cingular connections. The ATT rep stated as long as you are authorized to connect to isp.cingular you can tether.
Savage Life said:
I JUST TALKED WITH A REP FROM AT&T. THEY TOLD ME THE SMARTPHONE CONNECT UNLIMITED ISN'T FOR THE TILT. ( <AS STATED BY WARLOARD, WHAT PHONE DOES YOU SON HAVE? )
CAN I GET THAT ON MY TILT ANYWAY, AND GET A FAMILY TEXTING PLAN
LIKE THIS, THEN I SHOULD HAVE UNLIMITED DATA AND MY WHOLE FAMILY HAS TEXTING.
http://www.wireless.att.com/cell-ph....jsp?LOSGId=&skuId=sku980095&catId=cat1470003
Click to expand...
Click to collapse
Correct most Reps will not add it as they know its not the proper plan. However you can add it yourself in most instances without going thru CS by logging into your ATT online account manager and going to Phone/Device and Add/Remove Features.
potpeye said:
I have a Tilt and am on a unlimited data plan. Now there is a legal way to tether that Att doesn't tell you about. Current plans selling at the ATT stores have PDA MEdia Connect with messaging. Starting at 39.99 and goes up from there with some referring to tethering. if you do not have a tethering plan you cannot connect to isp.cingular or suppose to. I called up ATT about a issue I had with VOIP needing to access a full internet instead of a wap.cingular proxy internet cause I was on the PDA Media Conenct plan. That how I found out about another plan called PDA Connect Unlimited for 39.99 without messaging that allows wap.cingular and isp.cingular connections. The ATT rep stated as long as you are authorized to connect to isp.cingular you can tether.
Click to expand...
Click to collapse
The ATT Rep apparently doesn't seem to know what he was talking about which unfortunately happens a lot. They do need to train their CS reps better. Call 5 times and you'll get 4 answers.
First they wrongfully gave you help on VOIP as its against ATTs Wireless Data Services Terms and Conditions:
http://www.wireless.att.com/cell-phone-service/legal/plan-terms.jsp
PROHIBITED USES INCLUDE, BUT ARE NOT LIMITED TO, USING SERVICES: (I) WITH SERVER DEVICES OR WITH HOST COMPUTER APPLICATIONS, INCLUDING, WITHOUT LIMITATION, WEB CAMERA POSTS OR BROADCASTS, CONTINUOUS JPEG FILE TRANSFERS, AUTOMATIC DATA FEEDS, TELEMETRY APPLICATIONS, PEER-TO-PEER (P2P) FILE SHARING, AUTOMATED FUNCTIONS OR ANY OTHER MACHINE-TO-MACHINE APPLICATIONS; (II) AS SUBSTITUTE OR BACKUP FOR PRIVATE LINES OR DEDICATED DATA CONNECTIONS; (III) FOR VOICE OVER IP; .....<rest snipped for brevity>....
Click to expand...
Click to collapse
And for tethering:
FURTHERMORE, PLANS (UNLESS SPECIFICALLY DESIGNATED FOR TETHERING USAGE) CANNOT BE USED FOR ANY APPLICATIONS THAT TETHER THE DEVICE (THROUGH USE OF, INCLUDING WITHOUT LIMITATION, CONNECTION KITS, OTHER PHONE/PDA-TO-COMPUTER ACCESSORIES, BLUETOOTH® OR ANY OTHER WIRELESS TECHNOLOGY) TO LAPTOPS, PCS, OR OTHER EQUIPMENT FOR ANY PURPOSE.
Click to expand...
Click to collapse
The CS Rep was correct that if you tether with a handset your supposed to use the isp.cingular APN (or else you'll incur additional data charges) but just because your provisioned to use that APN doesn't automatically mean your authorized to tether without being on a tethering plan. For instance I have the PDA Connect Unlimited plan which include the isp.cingular APN (unlike the PDA Max plans) and I can tell you tethering is not allowed. I've been thru 3 levels of data services support (business/premier support is a lot more trained) on this subject confirming the differences in plans doing research for the ATT forums under the username "Planet-Ed" helping others and working with the moderators their.
Beat em at their own game
ecltech said:
Just use internet sharing. No need to configure a dialup modem/etc.
brainlb,
There doesn't seem to be much difference between the two plans you mentioned. I spoke to AT&T about this and they told me since I have a PDA phone I need the PDA connect plans and according to their system the MediaMax 200 is not compatible with my phone. However, a few people in the forums said they are using the MediaMax 200 plan without any problems. I may try this one day but not sure as yet.
Click to expand...
Click to collapse
Looking at a few of the posts here, just wanted to throw in my 2 cents...don't know anything about the tethering, no need for it. As far as the different plans go, if you get an answer u don't like, just call 'em right back up. After I originally got the tilt back in Oct, the cheapest was the bbconnect, which the rep signed me up for, then couldnt tell me how to set it up and ended up taking it off.
you CAN sign up for a couple of the media max/smartphone connect plans on their website, but run the risk of getting charged down the line because those aren't technically data plans, can't remember the exact wording they gave, but not legal for the tilt or other devices which have full keyboards (PDA)...anyways, after about the 3rd call into the reps to get info, one of their geniuses signed me up for the media max unlimited plan w/ 200 messages for $20...he wasn't educated enough to know that it isn't supposed to be used w/ the tilt. The way I see it, they can't go back and overcharge me for being on the wrong plan if THEY signed me up for it...just work the system and use their stupidity for your benefit
potpeye said:
I have a Tilt and am on a unlimited data plan. Now there is a legal way to tether that Att doesn't tell you about. Current plans selling at the ATT stores have PDA MEdia Connect with messaging. Starting at 39.99 and goes up from there with some referring to tethering. if you do not have a tethering plan you cannot connect to isp.cingular or suppose to. I called up ATT about a issue I had with VOIP needing to access a full internet instead of a wap.cingular proxy internet cause I was on the PDA Media Conenct plan. That how I found out about another plan called PDA Connect Unlimited for 39.99 without messaging that allows wap.cingular and isp.cingular connections. The ATT rep stated as long as you are authorized to connect to isp.cingular you can tether.
Click to expand...
Click to collapse
Hi:
I am on a PDA unlimited data plan. Can you please tell me what settings you used to setup isp.cingular?
Thanks!
PS: I have searched and searched for the settings, and although I'm sure they are on xda, my search results sure didn't lead me to them.
EDIT: Although I was unable to find the info on XDA. I did find it elsewhere, I haven't yet tried them to see if they work properly, but if not, I guess I will have to spend hours on the fount with tech support to get the correct ones, lol. I will post the settings here just in case anyone needs them:
Under settings/connections/connections:
Look for MY ISP and tap on "add a new modem connection"
Enter a Name for the connection: REAL ISP or something like that
Select a Modem: cellular line (GPRS) for 8125/ cellular line (GPRS 3G) for 8525
use the access point name isp.cingular
On the next page, enter either ISP.CINGULARGPRS.COM or [email protected] (either will work) for username and CINGULAR1 for password (make sure they are all in caps)
Leave Domain name blank
Under advanced, make sure the only things selected are "Use server assigned IP address" and "Use IP header compression" - leave everything else unselected.
Click ok and then finish
PsyOpWarlord said:
And for tethering:
The CS Rep was correct that if you tether with a handset your supposed to use the isp.cingular APN (or else you'll incur additional data charges) but just because your provisioned to use that APN doesn't automatically mean your authorized to tether without being on a tethering plan. For instance I have the PDA Connect Unlimited plan which include the isp.cingular APN (unlike the PDA Max plans) and I can tell you tethering is not allowed. I've been thru 3 levels of data services support (business/premier support is a lot more trained) on this subject confirming the differences in plans doing research for the ATT forums under the username "Planet-Ed" helping others and working with the moderators their.
Click to expand...
Click to collapse
So do you happen to know if there IS a plan where tethering is allowed? I also have the PDA Connect Unlimited, and can tether, but don't want to get dinged on my bill so I've been judicious with my use (i.e. emergency only)...
Myabe a better way to ask my question is - how do you get Laptop Connect, do you have to call? It doesn't show up on the website, as I have a family plan - does it need to be a business plan? ugh...
Just got my Tilt last week, and of course had to upgrade to PDA Personal Max plan (had been using MediaMax successfully with my Wizard). But I figured the increased cost was worth it, and that also I'd be able to access isp.cingular (which I had used before when I was on PDAunlimited plan)
Couldn't access ISP at first, so I called tech support. Very nice lady said "You were on MediaMax, now you've upgraded to PDA Personal Max but they haven't turned ISP on - I will do that for you". She did, it worked, no problem at first. Download speed reported by DSLReports was in 600's, vs. 400-500 when on WAP (on Denver's very recently activated 3G).
Then 2 days ago it quit working. I called - first guy couldn't understand what I wanted, kept trying to step me through configuration in Connections for WAP - I said I've already got that going, with and without proxy, no problem. So he says "Then what's your problem?" I say I'm paying for it, I should be able to access ISP, please be sure it's turned on. He doesn't seem to have a clue as to how to do this, or why I would want to. Call ended in frustration.
Next guy I talked to said "ISP is only for tethered plans". I said, "Oh, really, then what am I paying extra for my plan vs. MediaMax?" and he gives me the song and dance about how MediaMax is for Smartphones and PDA Max is for PDA's. I said I didn't think he knew what he was talking about and hung up.
So, what is the real deal? Shouldn't I be able to access ISP?
Would like to hear other's experiences - especially if successfully using ISP and not on tethered plan.
Hey I went through the same exact issue with AT&T about this isp vs wap. Reading all the talk about how isp was better I had my phone upgraded to it. Everything was working fine until around the time I got 3g service upgraded to my area. I noticed I could not connect anymore so i went back to the old wap settings and everything went through. I do not think it is because of 3g that I can't access isp anymore it's just the timeframe in which it happened. Anyway now when you call AT&T it is almost like they got brainwashed into thinking that isp is only for tethering plans. Even though I tell them I had this configured to my account before it literally seems like that they had that memory wiped out from their recolection. Anyways I guess I am not too upset since 3g was upgraded to the area however having access to isp and ispda would be really great. If anyone is lucky enough to devise a way to get this feature added to their 39.99 plan that would be awesome. However like cushcalc said earlier and like what I have gone through it seems that now isp is now tied to tethered $59.99 plans instead.
Also I wanted to add 1 thing to this. All reps swear that this does nothing to increase your speed however they have now become so resistant to even add this feature now to $39.99. So if it's really the same thing why all the hassle to give people what they want?
It takes time to talk to the RIGHT rep.
Don't worry, i went through the same thing. Until i spoke with a lady and told her that "my wap settings works correctly, but i don't want to connect it using wap.cingular anymore, i want to be able to connect to isp.cingular." She did go on mention about the tethering and blah blah blah. And i told her "im not tethering, i need isp.cingular because it assigns an IP ADDRESS to my phone so i can access my computer remotely when im away from the office from my PPC Phone." In conclusion, she did some research and it seems like there's two different $39.99 pda unlimited plans. So i told her i want the pda unlimited plan that has isp.cingular support and for $39.99. So in conclusion, i guess the rep needs to know the difference of the two. Not sure if this helps, but that's how i got my isp.cingular to for for unlimited us at $39.99 a month.
Ok, i just got my tilt a few days ago, it's my first pda/smart phone, what ever. Whats does all this mean and how do i check which i have. i'm on a 39.99 data plan.
I've tried accessing isp.cingular many times.
Always fails.
After reading this post I decided to give them a call seeing as I have the 39.99 PDA Plan.
Well after getting transferred a couple times, the guy told me my phone was provisioned to access either of the APN's, wap.cingular or isp.cingular.
I think I will keep calling back every day until I get someone that knows wtf they are talking about.
I need to be able to access my work VPN, and have to have a static IP
I've been back and forth with AT&T on this. I'm also in Colorado (but Colorado Springs, not Denver) and we just got 3g as well.
I called about needing isp.cingular to access my home VPN. The first rep told me I had to get the $79.99 tethering plan. I said no thanks. I called again the next day and got a rep who knew actually knew what she was talking about.
She said that feature could be added to my account for $3 a month. I agreed, she made the changes, and I hung up the phone happy. I rebooted the phone (her instructions) and tried to make a connection to isp.cingular. No go. Same error message I always get.
Can someone on this thread verify the connection settings?? This is what I have:
Access Point
ISP.CINGULAR
Username
[email protected]
Password
CINGULAR1
I haven't tried calling back yet, but maybe I will tonight.
PDA Connect can connect to isp.cingular. PDA Personal Max cannot. You need to have them change your plan to PDA Connect and you'll be able to access isp.cingular again.
Someone who can connect to ISP, go into your wireless account screen and get the Plan name. Mine is: PDAPERUNL1500MSG and I can't connect to ISP.
here is the weird part, when I activated my phone and called in for it, the rep told me the PDA plans were EXACTLY the same, same cost, everything else the same, except one included 1500 messages. I made him repeat it and said "So there is NO difference whatsoever except one has 1500 messages included?" He said Yes, so I went with it. But I'm willing to bet, the one w/o 1500 messages allows you to connect to ISP.
Ugghh...
Read my post above yours again. That's exactly what I'm saying. I currently have a tethering plan, but I used to have PDA Connect Unlimited and could use isp.cingular also.
You CANNOT use isp.cingular with the PDA Personal plans.
URPREY said:
You CANNOT use isp.cingular with the PDA Personal plans.
Click to expand...
Click to collapse
Then why did the AT&T rep tell me I could, but it would cost me an additional $3 a month?? (see attached pic)
Flapjack said:
Then why did the AT&T rep tell me I could, but it would cost me an additional $3 a month?? (see attached pic)
Click to expand...
Click to collapse
Did it work? Just because a front-line support person tells you something doesn't make it true.
Flapjack said:
I called about needing isp.cingular to access my home VPN.
Click to expand...
Click to collapse
I'm on the media max plan and VPN just fine.
I've personally done both IPSEC and PPTP vpn on wap.cingular
DLD
URPREY said:
Did it work? Just because a front-line support person tells you something doesn't make it true.
Click to expand...
Click to collapse
Obviously, I have to follow-up. The charge is there, for "static IP", which is promising. I will call tomorrow if I have time.
RacerX10 said:
I'm on the media max plan and VPN just fine.
I've personally done both IPSEC and PPTP vpn on wap.cingular
Click to expand...
Click to collapse
I can't seem to make it work! I can connect from another network w/o issues, I just can't from my phone. The only place I see to add the VPN connection is under my "Work" network settings....
If someone would enlighten this OLD dog, I would like to see if my TiLt will connect with the isp.cingular.com
Only problem and reply I can use would be to tell me how and where to adjust the settings.
Be kind.....newb at play with my new toy!
Try this
Try and call them and ask them to set you up on this one "PDACnctUntlAdd" that is the exact name i got when i went to the features page on my at&t account online. And it's only for $39.99 and my isp.cingular works perfectly with 3g connections.
Out of curiosity I tried changing my Tilts MEdia Net settings to go to isp rather then wap, and couldn't make a connection.
Portland Oregon Area, with the 39.99 PDA Personal w/ 1500txt
I get 500-900 on the 3G out here, 80-150ish on EDGE, and around 1.6mbps on my wifi connection through my cable internet. No complaints!
Would like to know what kind of a change this would make though, other then the IP assignment.
Bubbacs
In your Settings / Connections / Connections screen, click "manage existing" and then edit Media Net. First screen is to change name, 2nd screen is to assign wap or isp.
I may be reitterating some information here, but I can tell you as a fact, APN isp.cingular is being reserved for either PDA Connect Unlimited, or a Data Connect plan. If you are any of the PDA Personal plans, access to isp.cingular WILL BE TURNED OFF. There are however, a VERY small number of users that (by shear luck) didn't have isp.cingular turned off when they changed from PDA Connect Unlimited to PDA Personal Max.
My advise is.. if you can't get isp.cingular to work, quit beating your head over it and change your plan to PDA Connect, or get a laptop card plan like I did.
I did a long research thread on this at the at&t forums. I cannot access that site anymore, but maybe someone else could dig up a link.
GWelker62 said:
I may be reitterating some information here, but I can tell you as a fact, APN isp.cingular is being reserved for either PDA Connect Unlimited, or a Data Connect plan. If you are any of the PDA Personal plans, access to isp.cingular WILL BE TURNED OFF. There are however, a VERY small number of users that (by shear luck) didn't have isp.cingular turned off when they changed from PDA Connect Unlimited to PDA Personal Max.
My advise is.. if you can't get isp.cingular to work, quit beating your head over it and change your plan to PDA Connect, or get a laptop card plan like I did.
I did a long research thread on this at the at&t forums. I cannot access that site anymore, but maybe someone else could dig up a link.
Click to expand...
Click to collapse
Is this the correct one G? http://forums.wireless.att.com/cng/board/message?board.id=cingular&message.id=49092#M49092
OK, isp.cingular and a real ISP has been discussed quite a bit in the past, especially after the new rom came out and the PDA Personal Max data plan. And this is when the trouble started. Many users lost the ability to use a real ISP and some didn't. Some of the fixes posted worked for some and others it didn't.
For me none of the fixes worked but using APN wap.cingular really did what I needed, so I decided to leave it alone. After I decided to upgrade my data plan to Data Connect, I now NEED to use isp.cingular. I cannot log in my company's VPN unless I use APN isp.cingular. So I was bound and determined to make it work. After much reconnaissance I found all the answers right here on the at&t forums. But there are many pieces to the puzzle and they were spread out all over the place. This is going to be an attempt to put the pieces all in one place so the picture will come together.
Update 05/06/07 1:40pm
I put this information together with the assumption of readers having some working knowledge of Windows Mobile 5 and mobile phone usage. If you are a complete NOOB to the whole WM5 thing this information will create more questions than answers. I am far from being a tech guru and if I can half learn this stuff with both my brain cells, then most other people can too. But still..... noobs enter at your own risk.
The Connection Profiles
Now, the new rom sets up the two network connections, "My ISP" and "Media Net". Refer to here Browser/internet Settings There is a link in that page also for configure and use the My ISP profile. For the MEdia Net connections follow the instructions to the letter. Now the My ISP instructions differ from what the new rom sets up automatically. (and if you call CS the data guys will walk you through those settings in that link) The new rom will have the settings for a "real ISP" connection. You will notice, if you follow those instructions it has you change a couple of things. For one it has you change the APN isp.cingular to wap.cingular. Well this won't give you a "real ISP" connection but it will make the My ISP profile work for web browsing. I did a survey of users on who had "My ISP" working and the ones that answered yes, I bet they were still using wap.cingular in the MY ISP profile. So they were/are not getting a real ISP connection. I will quote from that settings page and maybe it will give you clue on it's purpose for using wap.cingular in the My ISP connection profile:
# Additional features such as Wi-f and device based e-mail along with other 3rd party applications may not be compatible with the proxy settings associated with the MEdia Net profile.
# If there are connection issues with e-mail and/or Wi-Fi, configuring and using the My ISP profile as displayed below may resolve connectivity issues.
# Configuring the AT&T 8525 to use My ISP will disable MEdia Net (WAP) web pages when My ISP is used for connectivity. However, regular Internet (HTML) web page browsing will function as normal.
Now the best I can figure, all this does is give two profiles and both use APN wap.cingular, but one uses a proxy server and one doesn't. Which brings me to my next category.
The Proxy Manager cabs
There are two cab files in a folder called Proxy Manager, under your programs menu. These two cab files enable and disable the proxy settings via a registry edit. Now, to me, if I continue to use the MEdia Net connection for all internet use, and utilize these cab files to disable and enable the proxy, I am doing the same thing as above by setting up those two network connections and swapping back and forth from them. Now once you have the My ISP connection profile set up with "real isp" settings it will be no longer necessary to use these cab files. All you have to do is switch back and forth from MEdia Net and My ISP. The MEdia Net profile has the proxy settings built in and you will have to use it if you want access to the Media Net home page.
http://home or http://device.home
Now on to the next topic....
How Do I Get A "Real ISP" To Work?
After it is all said and done, the bottom line is you have to be on the right data plan. From what I have learn't, you have be on a PDA Connect Unlimited, or a Data Connect Unlimited before your account is provisioned to access through isp.cingular. There are a lucky few that when they switched to PDA Personal Max, isp.cingular was not turned off (lucky dogs who's names we shall not speak ). But if it is turned off, CS will NOT turn it back on untill you get on the right data plan and that is the FIRST step. PERIOD Once you do have the right data plan and isp.cingular is "turned on" then it is as simple as setting up My ISP with the "real isp" settings. And thats it! For a recap of those settings refer to RonAnnArbor's post here. You can consider this post a supplement to Ron's.
Something About PIE
Now lets assume you got on the right data plan and isp.cingular is provisioned, and the My ISP profile is set up to use the "real isp" settings but it DOESN'T WORK! You pull up PIE to view a web page and it times out and displays one of those dreaded error messages. Have no fear I found the answer on the at&t forums too. But credit for it should go to the folks over at the XDA site. (man there are some pretty tech savvy folks over there! I wish I was as knowledgeable as those guys) There are some settings in the registry for PIE to auto detect proxy settings. Let's keep it simple and say PIE is "hard coded" in the new rom to always use wap.cingular. So if your connected to isp.cingular, well... you get the picture. That may not be technically accurate, but I think it will be easy for most to understand. (at least for my two brain cells it is ) You will find that everything else that needs access to the internet will work, like email, weather programs, but one will assume they have no internet access if PIE doesn't work. Now lets fix that too, but it will take a registry edit to do it. If you don't know how to do registry editing, I suggest you get a reg editor like Resco or Total Commander and learn how to use it. Now here is what you do. Go to:
HKCU \ Software \ Microsoft \ Windows \ CurrentVersion \ Internet Settings
There will be a Dword labeled "EnableAutoDetect". The default value that detects the proxy is "0", you can change it to a "1" but I recommend deleting the entire entry. Also after a reset go back and make sure it is gone. Sometimes the changes don't stick and you will have to do it again. Another thing to remember is DON'T use the Proxy Manager cabs again. The enable proxy cab will re-write those settings back in there.
Update 8/5/07 8:25pm: I have experienced an anomaly of the "EnableAutoDetect" Dword showing back up in the registry after a soft reset. No proxy cabs were used to cause it. At this time I have not figured out the "why" because it happened only twice. I will edit this update if I find the cause/fix. For right now I thought users should be aware of it and delete it again if necessary.
The Technical Side of APN (Or, what's the difference between isp.cingular and wap.cingular?)
Instead of me spouting off a lot of Geek language and acronyms I don't really know, I am going to link to this page. I have posted this link before and the entire page is some really good infomation. For the information related to the title of this paragraph, scroll down to the section labeled "There are two Cingular access points".
Multimedia Messages
If you want ot send/recieve MMSs, this "real isp" connection is not going to work. For over all web browsing, email, weather updates, ect, the MEdia Net profile should work just fine. I leave mine on MEdia Net most of the time. It is only when I am going to tether, or if a web site is acting flaking (that's a techincal term you know) I will switch over to My ISP. If you are connecting through My ISP when a MMS comes in, it will be a text message directing you to www.viewmymessages.com. (As of this writing this is how it seems to work)
Yep, that should be it. Of course all I can see is my ticket to Banville, but from your copy and paste, that should be the one.
FYI, some of the links from the copy/paste are not functional. But you should see them on the OP on the at&t forum.
The full thread can be found here.
hello!
i found this reg key for windows (PC), which enables (or something like that) internet connection via Active Sync.
Try it, i hope it will help you, if you can not use internet via AS!
see at attachments.
Merry Christmas!
///////////////////////////////////////////////////////////////////////////
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
///////////////////////////////////////////////////////////////////////////
Thanks I appreciate it. I'll try and report back when I get back home.
tilt 8925 as modem
i just got the tilt yesterday 12/24/2007 it is replacing the bb/curve 8310! so the rep told me that i could discontinue my att/air-card and that i could tether the tilt as the modem! the calling plan $59 and then $79 for the completely unlimited text/and modem usage! "worked great till about 4am" now the tilt is froze up on the widows mobile screen! yes i did the bat/pull-hard reset! then contacted tech/support! they said to take it back tomorrow 12/26 and exchange it! my question is if i pay for unlimited text and the $49 internet,,, why are they charging me an additional $30 to tether? and also is this a common issue with the tilt?
goofysvtx1300c said:
iif i pay for unlimited text and the $49 internet,,, why are they charging me an additional $30 to tether? and also is this a common issue with the tilt?
Click to expand...
Click to collapse
Because you get unlimited internet on your phone. You can use the limited browser, etc of the phone. Your obviously not going to take much bandwidth up using a small little phone.
You tether that to your PC, your internet usage goes up. Although you pay for UNLIMITED TRANSFER, they know you won't use /THAT/ much transfer on a tiny phone. You actually plan to take advantage of UNLIMITED by tethering, they wanna get even more money.
You can tether without AT&T's permission. Simply go into the WINDOWS folder and find the file called "Internet Sharing", create a shortcut by long tapping it, and copy the file to somewhere easily accessible. Double click this program, click USB then connect the USB to your PC. Now a new network interface should appear in network connections on your computer. You can use internet via ATT without additional charges.
However, if you use more than an unpublished amount of bandwidth, you'll end up getting a $4,500 bill in the mail one day. They'll start charging you per kilobyte. Their only argument will be "you cant use that much bandwidth on the phone, so you must be tethering"
Yeah, you pay for UNLIMITED INTERNET, but according to them it is LIMITED to your device. Nice, huh? Oh well, thats big megacorp for you.
goofysvtx1300c said:
iif i pay for unlimited text and the $49 internet,,, why are they charging me an additional $30 to tether? and also is this a common issue with the tilt?
Click to expand...
Click to collapse
Because you get unlimited internet on your phone. You can use the limited browser, etc of the phone. Your obviously not going to take much bandwidth up using a small little phone.
You tether that to your PC, your internet usage goes up. Although you pay for UNLIMITED TRANSFER, they know you won't use /THAT/ much transfer on a tiny phone. You actually plan to take advantage of UNLIMITED by tethering, they wanna get even more money.
You can tether without AT&T's permission. Simply go into the WINDOWS folder and find the file called "Internet Sharing", create a shortcut by long tapping it, and copy the file to somewhere easily accessible. Double click this program, click USB then connect the USB to your PC. Now a new network interface should appear in network connections on your computer. You can use internet via ATT without additional charges.
However, if you use more than an unpublished amount of bandwidth, you'll end up getting a $4,500 bill in the mail one day. They'll start charging you per kilobyte. Their only argument will be "you cant use that much bandwidth on the phone, so you must be tethering"
Yeah, you pay for UNLIMITED INTERNET, but according to them it is LIMITED to your device. Nice, huh? Oh well, thats big megacorp for you.
So yes, you pay extra for UNLIMITED internet... but it is LIMITED to your device. Cool deal, huh?
Hi,
I am trying to make my t zones work for the internet and I somehow made it work for the web access. But when I try to connect with the Live messenger, it tells me that there is no signal and that: "There is connectivity problem..."
When I am on WiFi it works without a hitch and when I am through USB as well. Just not through GPRS. I do not see it even attempt to connect through GPRS. Is there a way to tell it to connect through wireless?
Thanks
T-Zones is a proxy service and Messenger will not work with a proxy. For this, you need the full T-Mobile internet service plan ($20/month). At some point, it is assumed that the T-Zones work around to get internet access will probably go away... you really aren't supposed to use T-Zones the way many are using it. Until that time, consider yourself lucky to be getting access for email and web browsing.
yup, I am lucky
JonnoB said:
T-Zones is a proxy service and Messenger will not work with a proxy. For this, you need the full T-Mobile internet service plan ($20/month). At some point, it is assumed that the T-Zones work around to get internet access will probably go away... you really aren't supposed to use T-Zones the way many are using it. Until that time, consider yourself lucky to be getting access for email and web browsing.
Click to expand...
Click to collapse
OK, I found out that the problem was on the T-mobile side. They did not activate the plan, but it is weird because I was able to got online couple times. Right now it is working, just like you said - internet, but not messenger. I think that at this point I will stick with T zones. Since T-mobile does not offer 3G, I do not know if to invest in $20 plan. I get through T zones pretty slow connection, but I do not know if through data plan you get faster connection. Anybody?
kolibrik said:
OK, I found out that the problem was on the T-mobile side. They did not activate the plan, but it is weird because I was able to got online couple times. Right now it is working, just like you said - internet, but not messenger. I think that at this point I will stick with T zones. Since T-mobile does not offer 3G, I do not know if to invest in $20 plan. I get through T zones pretty slow connection, but I do not know if through data plan you get faster connection. Anybody?
Click to expand...
Click to collapse
Data plan does not get you faster speed, but you could use socket services to say play online games or use different IMs, and of course if you travels a lot around airport or stay at starbucks a lot, the hotspot is a real plus, for just $14 more a month...
lifanus said:
Data plan does not get you faster speed, but you could use socket services to say play online games or use different IMs, and of course if you travels a lot around airport or stay at starbucks a lot, the hotspot is a real plus, for just $14 more a month...
Click to expand...
Click to collapse
I have tryed all tmobile setting and different rom but i still can not get t-zone to work..
That is odd?
soloyo said:
I have tryed all tmobile setting and different rom but i still can not get t-zone to work..
Click to expand...
Click to collapse
I actually changed to Data Plan, because the Hot Spot is really nice for my laptop and so I got it. The odd thing is I did not have to change anything in my settings and they still work. Have not tried the Proxy server yet for IM yet.
Check some forums, I think somebody posted exact setting on the forum, but I can give you mine:
WAP: 216.155.50:9201
Secure WAP: 216.155.165.50:9203
Socks: 216.155.165.50:1080
This should work just fine for the data (does fine for me). I know that somebody also posted a cab file for T-Mobile settings, look up the forums the name is tmobyjoe599
Good luck!