Related
I am struggling to use my SonyEricsson HBH 35 Headset with my Tmobile MDAIII. But after a while the BT Stack stops working and I have to turn BT on and off to be able to use the headset again. Tmobile Service Line told me that they are aware of the problem and they will post a fix for that but no time frame was giving. Therefore I was wondering whether the latest Imate PDA2k Rom was having the same BT problems. Which version of BT stack is on this rom? Is it possible to copy the necessary files onto the MDA III and make it work with the never version?
PDA2K has the same issues with the BT Stack. In fcat it is just awful.
Anonymous said:
PDA2K has the same issues with the BT Stack. In fcat it is just awful.
Click to expand...
Click to collapse
Hell, its worse than 'just awful'....
...The Bluetooth on the PDA2K is just downright unusable.....
...I am still holding my breath, praying to GOD they get a real fix out and not just a 'here ya go' patch with more problems in it......
BT version... MDA III new ROM
I would like to know which version of the BT you guys have = which is most current for MDA III. To verify this go to settings/connection/bluetooth an check in About .
I have heard some news that ROM 1.20 is being tested internally, and somebody promised me to provide it to me. I am really waiting.. as current one keeps turning on device every minute...
have a hcb-30 bluetooth carkit that worked great with my Qtek 2020, but i cannot seem to get it to work with my qtek 9090....it finds the qtek allright and pairs with it, but cannot connect....my bluetooth version is 1.0.0 build 2200...
hope they get a fix out soon...
Re: BT version... MDA III new ROM
lukasz said:
I would like to know which version of the BT you guys have = which is most current for MDA III. To verify this go to settings/connection/bluetooth an check in About .
I have heard some news that ROM 1.20 is being tested internally, and somebody promised me to provide it to me. I am really waiting.. as current one keeps turning on device every minute...
Click to expand...
Click to collapse
I'm running v1.0.0 Biuld 2200
Mine also likes to turn the unit on every minute or two and run the battery down VERY fast...........
onurd said:
I am struggling to use my SonyEricsson HBH 35 Headset with my Tmobile MDAIII. But after a while the BT Stack stops working and I have to turn BT on and off to be able to use the headset again. Tmobile Service Line told me that they are aware of the problem and they will post a fix for that but no time frame was giving. Therefore I was wondering whether the latest Imate PDA2k Rom was having the same BT problems. Which version of BT stack is on this rom? Is it possible to copy the necessary files onto the MDA III and make it work with the never version?
Click to expand...
Click to collapse
You may tried that DON'T PAIR the HBH35, Afterwards, use a Bluetooth connection wizard to add it. This may be OK to add HBH35.
I don't know how those incompetent idiots could release the blueangel with such a obvious bluetooth problem, HOW CAN THEY NOT see it! the error messeges pops up so frequently.
Go for it, version 1.5
http://forum.xda-developers.com/viewtopic.php?p=65548#65548
I couldnt get 1.5 to work on my pda2k, cant overwrite certain files... how did you do it?
I didn't do it as i don't have a BT headset yet. because of these treads I'm waiting before i get the headset, gps, and keyboard for bluetooth
I didn't do it as i don't have a BT headset yet. because of these treads I'm waiting before i get the headset, gps, and keyboard for bluetooth
you don't have it yet and you are telling other people to go for it! i dont think it works for the pda2k
Did you read or post first?????????????????
As you can see Guest and firebird say it worked to some degree for them on the PDA2K (MDAIII). Since I didn't have a BT headset to try myself I thought I would help you by pointing you to someone who had.
Read posts before blasting back.
*********************
Guest
Posted: Mon Nov 08, 2004 06:20
Subject: BlueTooth manually updated on PDA2k to 1.5.081
--------------------------------------------------------------------------------
http://forum.xda-developers.com/viewtopic.php?t=11729&highlight=widcomm
Since I didn't see in any thread about someone updating their PDA2k to the latest widcomm drivers... Just an FYI, I copied the files from the other thread onto my PDA2k. Seems to be working. Will test further to see if I'm still getting memory issues like before.
NOTE - I used Resco to copy the files over. There were several warnings that I was updating a file in ROM.. but I went ahead and did that anyway...figured I could hard reset the device if need be.
just a warning, the ROM files he was talking about overwriting, cannot be restored by doing a hard reset, it is permanent. if it messes up you will have to re-flash your pda with a new copy of the OS. that's what i had to do since i couldnt get it to work
Help, I bought a hbh-600 bluetooth headset but am not be able to connect it to my Qtek 9090. I can find the device and authorise it, but I am not able to connect to the device. Everytim I will connect to the device my Qtek 9090 says: Connection failed...
Help what can I do...
Had this problem yesterday with my step uncle's Harrier, and the HBH-600.. Just took a lot of fiddling around by turning bluetooth on/off, re-pairing, and it eventually worked.
I haven't seen this with my Harrier/HBH-600.. but I have had some general bluetooth issues.. About to try an upgrade to the 3500 build.
Can you tell me specific what you have done? Because I have tried that repairing and Bluetooth on and off also a few times...
Is it the authentification? Or is it something else.
Tnx!
:wink:
Well, no, not really sorry.. I was just mucking around, because he was in a hurry to leave... It just worked in the end. It may well not be the same problem anyway.. sorry.
the range on HBH600 sucks - mount it on the ear, and put 9090 in your trousers pocket or extend your arm while holding PPC - you will have very poor sound instantly.
Tnx all for the info. I have found the BT-PPC build 3500 patch and my bluetooth headset is working!!!
what's your radio firmware version now ?
Radio: 1.06.00
Bluetooth: BT-PPC build 3500
Hi all,
first wanted to say that it is a great forum.
I just came across it couple days ago, and there has been many things that I found here that improved my Qtek 2020i.
but there is one thing that i havent found in here.
I use tomtom 5.21 with a bluetooth GPS receiver. it worked fine until I bought a bluetooth headset. If im using TT to navigate and answer a call via bluetooth headset it works fine, but when i hung up the call, then Qtek looses connection to GPS, then picks it up again in about 10 seconds but runs with a big delay. I have to restart tomtom and then it is back to normal (quite annoying when driving thru town)
any of you have that problem??
thanks for help.
Hi there,
My problem might be related : the device seems unable to use both the headset and the GPS (with TT) at the same time. I don't know why. I've got a Qtek ROM at the moment, I'll see if the latest O2 ROM with upgraded radio stack does any good.
See you.
Right. Just switched to PUG's .162 ROM with O2 stuff stripped.
Alas, it comes with Broadcom stack and there's no SPP inside so I can't connect to my GPS ... Pug if you read this, help
Cheers !
seems strange: I replashed my stock O2 bloatware & buggy 169 Rom with pug's flavour, to give me the 162 rom and Radio version 1.04.
My GPS bonds fine tihe BT, and I can use TomTOm and a BT headset at the same time. Did you flash the Radio to the (far better) 1.04) when you upgraded the Rom?
I've heard quite a few people say on these forums that for Alpine, one of the most stable & speedy setups is the 1.10 WWE Main Rom, the .162 Pug rom with the O2 stuff stripped out, and the 1.04 Radio.
Joe
Yeah actually it works fine now. I made another post while I was looking for help, because the Alpine wouldn't find the SPP service when interrogating the GPS. I simply switched the GPS off and back on, and the problem was gone. I wish I'd tried that before the dozen ROM combinations I spent the afternoon testing
And indeed, I'm now running 1.11WWE/1.04.00/1.11.162 PUGS w/o O2 stuff, and finally TT accepts to work with the headset while using the GPS. What a trip !
Cheers !
Hello,
Just upgraded to WM6 using the official Palm upgrade (TREO750-2.23-RWE).
The Treo is unbranded and came with WM5, also an RWE ROM.
The most important issue I currently have is terrible bluetooth interaction with my car-kit. Pairing is OK, I can start or receive a call, but there is no sound. Before, with WM5 I had no issues.
Setup:
- Treo 750
- WM6 (TREO750-2.23-RWE)
- Pegeuot RD4 radio with integrated bluetooth
Any solution? Or should I downgrade to WM5? If so, how should I downgrade?
Your help is most welcome!
David
Odd... With both the Treo 750 running WM5, I had the same problem. Basically, the first 30-60 seconds of a call wouldn't sound on either the handset, or the speakers over the bluetooth connection. This was always for the first call after getting in the car. To get around it, I would get in, start up the car, and call my voicemail. Once I could hear the call on the speakers, usually 30 seconds later, I would hang up. I could then make and receive calls normally.
After upgrading to WM6, incoming calls would occasionally be very low volume. I would have to hang up and call the person back. This also happens with WM6 on my AT&T Tilt.
No fix for that one....
daupers said:
Hello,
Just upgraded to WM6 using the official Palm upgrade (TREO750-2.23-RWE).
The Treo is unbranded and came with WM5, also an RWE ROM.
The most important issue I currently have is terrible bluetooth interaction with my car-kit. Pairing is OK, I can start or receive a call, but there is no sound. Before, with WM5 I had no issues.
Setup:
- Treo 750
- WM6 (TREO750-2.23-RWE)
- Pegeuot RD4 radio with integrated bluetooth
Any solution? Or should I downgrade to WM5? If so, how should I downgrade?
Your help is most welcome!
David
Click to expand...
Click to collapse
daupers,
Just curious that this might be related. Can you post what radio version you ended up with after the upgrade to WM6?
Dropped the issue at Palm
Yesterday I sent an email to drop the issue at Palm, since I used the official upgrade on an official pristine Treo. I still have to receive an answer.
I'm wondering if I ever will receive an answer that will resolve my issue.
Did anybody else on this forum ever get help from Palm?
David
Im heaving simmilar problems with Treo 750 WM5 and Toyota original BT-HF. Repatedly the connection is established, but then lost (without warning) - and then you get no sound (or an odd "interferrence " sound). I switch the BT off, then on, connect it again and it (usually) works fine. I assume it has smthng to do with the BT firmware. No other solution so far.
Where can I find a download for the original RWE WM5 ROM?
Can anybody provide me with a link to an WM5 RWE ROM for the Treo 750 (Cheetah)?
Thanks
I did some searching and so far I discovered the following.
WM 5 supports bluetooth 1.2.
WM 6 supports bluetooth 2.0, which should be backwards compatible with 1.2.
The carkit supports 1.2, but I'm not sure if it supports 2.0.
It looks like a compatibility issue, caused by the upgrade.
Could this be the source of the problem?
D
The hardware in the 750 supports 1.2 only, WM6 is backwards compatible with 1.2. Any device that supports 2.0 will be backwards compatible with 1.2. I just upgraded to the AT&T official WM6 build and am still having the same problems as always with my Moto HF850, no voice command, only get one working connection before the bond fails and I get no audio. *sigh*
I have the same problems Treo 750V 2.18-VFE with WM6.
Car: Citroen C4 with integrated bluetooth radio.
My car connects fine to the Treo, however when I make a call or answer a call 9 out of 10 times I have no sound. Currently I have to use the wired headset.... While I have no sound the connection is intact and I cannot use the Treo itself without cancel bluotooth from the menu.
I can read the indexes of the phone, make calls by using car functionality but no sound. Also when I have sound most of the time it's after ten seconds.
Since yesterday I also have no ringer sound anymore. Palm Support gave me an update but it's not for my ROM version.
I'm affraid I have to ask Palm to swap the phone again. Currently this is number 3:-( within a few months
BT working after WM6 upgrade
Hi everybody, surprisingly, after upgrade to WM6, my BT connection with toyota original handsfree started to work, I haven´t had a single "lost connection" since. Why is that I don´t know... Just to let U know - More lucky than the others...
I Received my fourth Treo last week. I now have ringer sound again (for now).
However I still have the sound problems with using my carkit.
My car connects fine to the Treo, however when I make a call or answer a call 9 out of 10 times I have no sound.
I get the same problem with an Orange SPV M3100 (HTC TYTN) and by factory fitted bluetooth kit in my Citroen C4... It's fine using the latest Orange WM5 ROM, but upgrading to WM6 stops the car kit from working, (connects, but no sound). I asked my Citroen dealer and they advised it was a known issue with 'high end phones like Nokia running Symbian, etc'. They had no idea about when a fix might be available.
Delayed or Missing Sound
Install the sound fix. That's what is there for.
What sound fix? Can you post a link, or let me know where it is?
Support also advised me to install the sound fix.
However it only work for lower rom versions.
When you install WM6 You will have a higher rom version.
The sound fix should allready be in WM6.
I think I'll try to contact Citroen about this...
Hello,
Recently received a new treo 750 to replace faulty unit (ear-phone speaker faulty). The new unit had WM6 installed, which doesn't work too well with bluetooth hands-free kit built into Range Rover.
Would like to downgrade to WM5 (as this work perfectly before) and would appreciate guidance on locating a vodafone or unbranded UK WM5 rom.
Thanks in advance,
4eveRed