Hw6515 dumped rom to SD-card with ntrw.exe - Beetles

Hi all!
I get a hw6515 device without any rom. This is "engineering sample". I managed to write bigrom112.nb1 to sd-card, and I succesfully flashed it. But while it has no radio rom the gsm function is not working. And now he think, he is hw6510a. Can somebody upload somewhere his dumped rom? I hope, if i flash hw6515p rom(or something like that) and can upgrade the radio rom with the original hpRUU.exe. The perfect would be if you use 128 MB sd-card.
Thanks for the answers!

Good news
I get hw6515d rom. I sucessfully flashed it, and everything is ok. But I can not upgrade the radio rom with the latest original hp upgrade. I stuck at 0.1%. I tried an another upgrade, and step from 0.1% to 0.2% is 35 minutes. and other 30 minutes it jump to 0.3%. is it normal?

Yup radio rom upgrade takes a while. But if you find that it takes longer that a couple of hours, you radio stack may probably be screwed like alot of other people. Check out
http://blogs.unbolt.net/index.php/brinley/2007/07/31/ipaq_6515_dead_gsm_after_failed_firmware
You can also get a radiorom dump there and see if you can restore your radio stack from it but do this as a last resort.
As for the ipaq model, since you already have the bigrom image, you can hexedit it to change the model number. Instructions at http://blogs.unbolt.net/index.php/brinley/2007/07/09/howto_change_serial_number_and_model_num_6515

Thanks for the links,but I already read them.
I think the radio part is dead. I doesn't matter, my hw6515 is just a hobby-phone, because my primary phone is MDA Pro. I just want to "repair" it, and if it can be used as a phone too, I give it to my girlfriend, she like it. Now it is just pda with gps funktion. We use it in car with Igo.

how to flash from SD card ?

Hello, I am new here. My IPAQ 6515 was dead after upgrade offial pacth HP. I search on every forum an bigrom image, to restore it via MTTY. Thank's for answer

Related

Old Radio Stack Won't Upgrade

[writing from work in a hurry, so excuse me for not having all my details in front of me]
I'm a long-time avid user/flasher of the Wizard who recently bought an old BA on eBay for my wife. First thing I did was download the xplode WM5 ROM and flash the sucker. Very nice and now up-to-date.
Call volumes sucked, so I checked her Radio version, and it was 1.02 or something ridiculously old. I tried to flash the newer 1.15 Radio Rom using the bootloader app that came with it (MAUUpdate something). I got a country code error, so I added the special line to the config file to cheat.
Now it starts the process and never gets past 0% on radio flash. Just hangs. And then some strange 114 error when it finally dies.
I've tried with the newest MaUpgradeUt_noID files I could find. I even tried the 1.13 Radio ROM with no change.
I even re-flashed to WM2003 and tried to flash just the Radio from there. Kept getting "wrong device" message or connection error or something. I tried multiple times in a row (one post suggested the first time will error but second time will work).
I did SIM unlock just in case (Cingular on Cingular so shouldn't have been a problem).
Any suggestions out there? I think I've tried everything!
And yes, I've read all posts and wiki's. (Usually I read only Wizard, but have extended my reading to cover the BA).
Have you tried downgraging to WM2003 then upgrading to Radio 1.15 then finally back to WM5?
I had upgraded my radio ROM when still on WM2003 and found no problems!
xummy111 said:
Have you tried downgraging to WM2003 then upgrading to Radio 1.15 then finally back to WM5?
I had upgraded my radio ROM when still on WM2003 and found no problems!
Click to expand...
Click to collapse
yes, I did. mentioned that above.
I get either country code error (or after correcting that per the wiki advice, I get long period of hang followed by an odd error 113. I think.
does device origin matter? my BA is from ebay and the getdeviceinfo.cab leaves me a blank result except model number and a few random numbers...
I take it that when everyone else flashed to WM5, they followed the simple Wiki instructions and everything went fine? I think I got some odd-ball sub-model that is resistant to Radio flash.
Downgrade Your BA to the WM2003SE, then unlock it with xda3_all_unlock-v1.6_138.exe tool (You can find it in the BA forum here with description how to use it) then try to flash the Radio ROM You want....And then You might upgrade to WM 5.x again if only You wish.
I've tried one of the other sim unlock apps already (successfully) without solving the problem (was tried on WM5). I'll try the order of downgrade, unlock, then upgrade and see if it works.
Thanks for the suggestion.
Jeremy how did it go? are you able to upgrade to the latest radio rom? I also have the same problem as you do. Do you mind telling me the steps if you somehow able to upgrade to latest rom?
this worked for me. after you flash to a new rom (like xplode's), do not take out the BA yet. flash to the new 1.15 radio rom. then you can do the no/yes/yes routine.

Did I brick my Treo 750

Since I've upgraded to the official AT&T WM6, I was having problems with reception. Therefore I decided to upgrade my radio. When I looked around, I found out that the Hermes radio would work with the treo. Therefore I downloaded 1.54.00 radio for hermes from this site, put it on my mini sd card, renamed it to cheeimg.nbh, and updated my radio (btw my phone has oli's hardspl). Now my phone gets stuck after booting and I have no reception. I cannot even do anything with the phone. It simply freezes at the today screen. I tried to flash the originial WM6 rom back via mini sd and still no luck. Did I mess my phone up for good? Can I somewhat fix it?
Real CREFULLY ALL thred about Hard-SPL. Problem with Herm rdio was described. AFAIR there's no solution (hope I'm wrong).
I apparently missed it. What exactly is the problem? Can I go back to the normal (original) bootloader?

Cry for help - missing radio rom

Hi everyone.. First post and I think this is a great site. I've managed to flash a wm6 rom to my Orange SPV m700, and although it worked great for a while, I decided to flash my radio rom (initially 1.16.00.00) to 1.50.08.11 not a great idea it would seem, as after a successfull (so it seemed) flash and a reboot, the I now appear to be missing both a radio rom and a gps rom!?!
Can anyone help? I've tried flashing back to a 'orangeuk' WM5 backup (created by someone on this this forum) and I'm having no luck what so ever. The downgrade to WM5 stalls at 82%. My gut suspicion is that it's failing at the radio rom, and I can (sort of) prove this when trying to flash the radio rom - it fails at 0%
PLEASE HELP
Update on this.
Downgraded from 1.30 Hard SPL to 1.20, tried flashing Radio Rom, again no joy. Have also attempted upgrade from SD card - again no joy.
Anyone?, Anyone?... Bueller?.. Anyone?
Just to add, there's no Radio/GPS or IMEI number.. I've seen other people with the same problem but no 'real' guide to fixing..
Just tried (on a whim) to downgrade the radio software down to to 1.16.00.00 using the SD card (basically trying to use Pof's unlocker radio rom) but still no joy, using the SD card just get's about 10% of the way along the progress bar and stops..
I'm struggling here folks
k0pp0 said:
Just tried (on a whim) to downgrade the radio software down to to 1.16.00.00 using the SD card (basically trying to use Pof's unlocker radio rom) but still no joy, using the SD card just get's about 10% of the way along the progress bar and stops..
I'm struggling here folks
Click to expand...
Click to collapse
Try Des' Crash Proof SPL in my signature.
i have same problem .... can't find a solution if you manage to fix it please post
Never did get this working, ended up having to get a replacement phone.. Just debating trying it again, as my current (white) Orange SPV M700 hangs nearly every saturday (bizarre).

Bricked Vodafone Kaiser ... HELP!

Hey Chaps,
Just thought earlier today i'd have a go at upgrading my phone with the new HTC firmware for my Vodafone Kaiser. First i tried it on it's own only to find the 'vendor' had blocked the upgrade, then i ran the HARDSPL software, when it rebooted my phone to the tri-colour screen i stopped pressing enter on the batch file and ran the HTC upgrade again! ... success - sort of; the upgrade got to 15% and stopped with a connection error (my usb's dodgy i think), then when the phone rebooted to the tri-colour boot loader it'd a) no longer accept the HTC Rom (vendor thing again) and b) become irritatingly broken.
Is it possible to flash an older vodafone rom to the device? if so, where can i find such a beast. Or does anyone know of any devilish ways to put the new rom on using the bog standard bootloader?
Thanks in advance big time to any clever phone experts who can de-brick my... er... brick
Dan.
your supposed to install hardspl before upgrading it if you try it on its own it will brick it at least thats what i heard from the stickies
azazelx, he has hardSPL installed, anyway.
@JimmyJangle: flash via microSD card. [url="http://wiki.xda-developers.com/index.php?pagename=KaiserSDFlash" URL]Read here.[/url]
You need winrar to extract file nbh from the shipped ROM.exe.
Hmm, i don't think i do have HardSPL actually installed,
When i saw the tricolour screen come up with different version information I stopped that batch file that was installing HARDSPL (impatiently) and started the HTC one (which failed at 15%). So now i (think) i have a phone with no firmware and the bootloader says:
KAIS130
SPL-1.56.0000
CPLD=8
I reckon if i can find a vodafone made rom the bootloader'll let me install it.
Any idea where i could find one?
What is ur orginal shipped ROM?
Your solution now is flash back the orginal ROM by using microSD card method I mentioned above, install HardSPL succesfully, then flash whatever ROM you prefer.
Hey Nghiem,
Thanks for the help, that link doesn't go anywhere though.
Also, wouldn't i need the original rom from somewhere in order to do that?
Thanks,
Dan
where did you buy the phone e.g vodafone, orange, etc...so I can tell you the original ROM? Because you phone CID is not unlock, hence you must flash the back the shippied one.
Get the WM 6.1 Vodaphone official here http://forum.xda-developers.com/showthread.php?t=365058
Hi,
I got the phone from Vodafone in the UK.
It had WM5 on it... erm, that's it.
I've just beem trying to load original voda roms back on to it but it's not happy - i don't know if they really are the originals though, one says 'reconstructed'.
Dan
Actually, that was the rom i tried and it came up with the Vendor ID error.
Dan.
Link on post #6 is the official not reconstructed. How about download directly from Vodafone website? It's strange when you have carrier ID block even with its ROM. Also, try reconstructed ROM listed here http://forum.xda-developers.com/showpost.php?p=1586817&postcount=2
Search for mtty, see if it can help you out.
MTTY saved the day!
Only 3 hours of my life lost!
Thanks,
Dan
Cheers. Don't forget to flash HardSPL and read the wiki before doing anything.

Problem with HTC Kaiser Tytn II - please help...

So my problem is - I put android on my htc tytn II and it worked (well kinda) but anyway I decided to switch back to Windows Mobile...
I installed 1.27.x.x radio , found a Windows Mobile 6 ROM and put (Like in the instructions ) Kaisimg.nbh(renamed from ruu_signed.nbh) and Kaisdiag.nbh to my SD card and then started flashing... It flashed smth,rebooted automatically and started booting android again...
Then I hold again camera button + power+ reset and since then when I put EVERY .nbh file on my sd card and try to flash it it STUCK on "Loading.." If I try to flash it with USB It stays at 0%.
The only exeption is if I try to flash from USB the rom that I tried to flash before from my sd card.. then it starts 0%..1% and reboot the phone...
P.S: Please help me...I think my device is not Broken but I dont know what should I do to fix it...
To flash back to WM from android put your kaiser into bootloader (multi colored screen) Then connect to usb. Download any WM build that is recent (I suggest Phoenix 3 for this, you can flash whatever you want later). After you download it open and run the included RUU that came with it and it will flash it on there.
hmm, I also had experienced the similar problem on my 1st time flashing back to WinMo.
When you are trying to flash via USB cable and the process stopped at 1% I guess there is also a message about "Invalid vender ID" right?
and if the text in your bootloader (tricolor screen) doesn't mention anything about hard such as "3.29.0000" (not "3.29.hard")
then
you've lost your hard SPL that's why you cant flash any .nbh to your phone.
I had managed to solve this problem by flashing stock WM rom for kaiser. The rom also has to be suitable for your phone, I mean if your kaiser is originally from France, then use French kaiser stock rom. Or if you are using AT&T Tilt use kaiser cingular stock rom.
you can find the list of shipped roms for kaiser here :
http://shipped-roms.com/shipped/Kaiser/
If you still have the "invalid vender ID" error message, try another stock ROM.
Thanks man you're my hero! I though I lost my phone.. anyway i bought new one - Nokia 2730 Classic but Ill sell the kaiser...
Thanks Anyway ... you're god!
Have the same problem...
Firstly, I'd like to point that the reason for the hard SPL getting overwritten by an original SPL is NOT HAVING UPDATED HARDSPL to a newer version that prevents accidental overwrite. This is instructed in the previous steps before actually installing Android. That was my mistake (I had HardSPL 1.0 OliPof), and now I can't flash no rom to my Kaiser (which thankfully works quite well in Android).
What happens (please correct me if I'm wrong) is that "KAISDIAG.NBH" is a modified, standalone hardSPL that will flash to the phone the SPL that comes with the "KAISIMG.NBH" you put in your SD card with "KAISDIAG.NBH"). In my case, I used the WinMo 6.1 spanish version 3.29.412.0, which, resulted in my phone being flashed with the original SPL 3.29.
Now, it seems many users have fixed this locating the correct stock rom and flashing it in their Kaisers. But to others, like myself, nothing seems to work. I believe that this is because we not only need a stock rom for our specific Kaiser model, but also it has to be compatible with the SPL that accidentally got installed in the phone. The problem is what if such rom doesn't even exists?
I'm really thankfull for all I learned by reading the forums (and from my mistakes ) and I know I'm in no position to make requests, but here goes what I think could help the users like myself to fix this, if posible:
1) Guide to identify what model of Kaiser we have (maybe it's already there, I just couldn't find it)
2) Complete list (or lists) of stock roms (There are some around, those are easy to find I think, but it doesn't hurt to share different sources)
3) Something like a JumpSPL for Android would be more than awesome...
Thanks in advance to everybody, sorry for my own stupidity . Any idea or help would be much appreciated,
Daniel
hmm, I'm not sure if it has to be compatible with the SPL.
In my case, I was flashing a very old WWE stock rom which has original SPL 1.56.
I also had been very desperate because any stock rom I found seems doesn't work and I even didn't know where originally my kaiser came from because I get it from my uncle. So I tried to flash any WWE stock rom I could found but nothing works. I read from Wikipedia that based on my phone model (Kais100), this model was only sold as AT&T tilt for US. But the problem is my phone is HTC branded, not AT&T tilt. Well, based on this information I also tried to flash some cingular stock rom but the result was just the same.
After contacting HTC Customer care, I know more info about my phone. They told me that based on my phone product ID, my kaiser was originally shipped for US, but unfortunately they can't provide me stock rom for my phone model. So I searched myself but this time I had better objective : to search HTC branded rom but for US.
finally, after days of search. I've found the rom that is suitable for my phone. Its called HTC WWE Brightpoint US which has original SPL 3.29 at the bottom of the list on the website I told you on my previous post.
few weeks ago I also accidentally overwrite my HardSPL again, but this time I did it with the stock ROM which has original SPL 3.29. But this problem also solved by flashing the stock ROM I've found before via USB cable.
So, I guess it has nothing to do with spl version.
Keep tying don't give up.
Update: Step 1 completed! YAY
Using the serial number and some obscure google searching, I came to the conclusion my KAIS130 is australian. Cheers, mate!
I verified this by being able to download stock roms from the australian HTC site with my Kaiser serial number. But at the moment of writing this, have downloaded two roms and no luck yet. 5 minutes remaining for the third one... Wish me luck...
Daniel.
Well... Now what?
Tried all four rom-like thingies I could download on the HTC page, all of them returning error 294...
Now what? try to somehow extract the .nbhs from the exes and and use customRUU.exe? Try to flash from SD card?
Please help... Any ideas... I really want to get rid from that original SPL3.29.0000 It's evil!!! I think it won't never let me flash again.
Thanks,
Daniel
cuartetoraro said:
Tried all four rom-like thingies I could download on the HTC page, all of them returning error 294...
Now what? try to somehow extract the .nbhs from the exes and and use customRUU.exe? Try to flash from SD card?
Please help... Any ideas... I really want to get rid from that original SPL3.29.0000 It's evil!!! I think it won't never let me flash again.
Thanks,
Daniel
Click to expand...
Click to collapse
sorry to hear that..
well, extract the .nbh from exe and flash it via sd card is the method that made me overwrite my hard SPL in the first place.
hmm, did your phone comes with operator brand, such as three or something?
-Rif- said:
sorry to hear that..
hmm, did your phone comes with operator brand, such as three or something?
Click to expand...
Click to collapse
No, it's HTC unbranded. Now, something strange here: the label behind the battery has the serial number: HT830GB06075 and the P/N (guess it's part number) :99HCY194-00, but to the left of the camera, another label with the part number: 36H00563-00M and below says DATE:061107(TB02)/US.
I don't know if that's normal, but it caught my atention because my phone seems to have been dissasembled (little label over screw is teared). Maybe my Kaiser isn't Australian after all...

Categories

Resources