Related
I'm getting to the connection page but then it goes back to the sign in.
Working great on my phone.
can you attach the ractrl.cab you used?
Never used one, basicaly i went to the website on my phone and logged on and it asked me to register my phone. ( am an existing user btw on Imate K-jam). Software downloaded automaticaly if I remember rightly.
trjons said:
I'm getting to the connection page but then it goes back to the sign in.
Click to expand...
Click to collapse
Just tested it and works nice.
Downloaded the RACtrlCE.cab more or less automatically. And then continue...
The only thing that makes me doubting is, that I remember I tested it before on this device. I threw away the RACtrlCE.cab from my documents folder.
Maybe not allowed to throw it away? I will test in the future.
But: Works perfect and the scrolling, by pointing in the corners, goes faster than on my Qtek 9100.
I miss the larger real estate of course.
Huib
I must have used the old RACtrlCE.cab because when I uninstalled it and tried again it worked.
Your in luck mate, I found the file. But I cant find away to upload it here.
yeah, connecting to logmein and installing the cab directly from website works great!
Sorry to revive this old thread but I found it to be inconclusive.
I have the same problem as the OP: I login to their website and see my list of computers...from that point on anything I click, be it a computer or the "my accounts" section, it brings me back to the login screen. It's a complete loop.
I've been using logmein a long time and I know that the .cab file is downloaded right after you choose which computer to connect to...but I can't make it that far on my AT&T Tilt. It's just a loop.
I went back to my PPC-6700 (HTC Apache) and used my WiFi to connect to logmein and had no problems whatsoever.
Any suggestions? Should I find the .cab on my 6700 and send it to my Tilt?
Thanks in advance.
I'm impatient so I went ahead and copied the .cab file from my 6700 to my Tilt...the result is the same.
It installed fine: no errors, no message that it was made for a previous version of windows etc.
However when I go to logmein.com and try to login, I am confronted with the same loop as described above.
When you log into LOGEMEIN it will prompt you to d/l the .cab file if you dont have it installed. I had no problems in logging in from my 8525 or TILT.
avega1027 said:
When you log into LOGEMEIN it will prompt you to d/l the .cab file if you dont have it installed. I had no problems in logging in from my 8525 or TILT.
Click to expand...
Click to collapse
Like I said, I can log in fine. Upon choosing which computer to connect to, it brings me back to the login screen. Typically, you would choose the computer you want to connect to and then it would realize you don't have the program installed and prompt you to do so. However, whether I have installed the .cab manually or before doing so, I cannot get this far.
I got my Tilt yesterday and the only tweaking I've done is with the KaiserTweak program from these forums. If anyone can point to a specific tweak that might effect this, I'll revert it...
After more testing I found a way to get access to my computer. Instead of clicking on the computer name, click on Edit. Then scroll down to where it says "Status: Online, Connect to this computer" - You can click on "Connect to this computer" and it will work.
After making it work I went back to my computer listing screen and tried to click on the name, as usual, and it went right back to the login screen. At least this workaround seems to work fine. I'll try uninstalling the software now and letting it install on its own and see how it works from there...
After uninstalling, rebooting, testing, reinstalling, rebooting and testing some more...I have been unable to replicate my "workaround" from above. I'm left clueless as to what the problem is here and whether this is just some dumb server problem on logmein's side. If anyone can help please chime in. tyvm
On a Tilt try
Start>Programs>Tools>Proxy manager>disable proxy
Worked like a champ for me
Those having problems; are you trying to access logmein using the full web site - https://www.logmein.com or logmein for PDA's https://secure.logmein.com/pda/ ? The full web site gets me in a loop, but using the site for PDA's works perfectly.
FrankyG
TomErickson said:
On a Tilt try
Start>Programs>Tools>Proxy manager>disable proxy
Worked like a champ for me
Click to expand...
Click to collapse
Yeup forgot to mention that. When I log in I disable the proxy.
If i remember correcly, i had this loop problem when using opera on the kaiser to surf on logmein.com .
Used PIE instead and no more loop problem.
Thank you for the proxy fix - it worked for me.
Can someone tell me what the proxy is for and if there is any reason I would need to enable it again? I'd like to know if I should bring this to logmein support or not. Thanks.
jeffreii said:
Thank you for the proxy fix - it worked for me.
Can someone tell me what the proxy is for and if there is any reason I would need to enable it again? I'd like to know if I should bring this to logmein support or not. Thanks.
Click to expand...
Click to collapse
i think its for cingular's internal sites...like ringtones and that kind of madness. i doubt you'll ever need it.
Happy New year to everybody...
Mine has started off bad, I just returned from my X-mas/New year break and I can no longer sync, install or uninstall programs ?
when I connect my PDA to the PC it sees it, but it can't sync, if I go to remove/add programs it shows empty nothing installed.
I can even brows the PDA but I can't copy files to or from it?
I'm lost, can anyone help me out on this I really don't want to do a hard reset.
Thanks.
Anyone.........?
tryed to reinstall active-sync?
did you installed some program has to do with network (kind of ftp-server or something else that uses some ports in you network-config)
i had the problem with filezilla ftp-server, using port 990 for ssl-authentification.
the problem was, active-sync also uses this port, but filezilla starting as service was bound to this, so AS could not work.
edi said:
tryed to reinstall active-sync?
did you installed some program has to do with network (kind of ftp-server or something else that uses some ports in you network-config)
i had the problem with filezilla ftp-server, using port 990 for ssl-authentification.
the problem was, active-sync also uses this port, but filezilla starting as service was bound to this, so AS could not work.
Click to expand...
Click to collapse
Hi Edi, No I haven't installed anything, but I think my problem might be something else (worse), I just realised that I can no longer copy move or delete files from either the PDA or the MC, I get an "access is denied" error.
Anyone have any idea what might have caused this? and better still, is there a fix.
I seem to be repeating myself lately with this answer, so I apologise if it seems down-right obvious, but have you ensured you have the latest version of ActiveSync/Windows Mobile Device Centre?
The reason I ask this is because I too was experiencing Sync problems using WMDV, but realised I didn't have the latest version (it doesn't automatically update with Windows Update, WTF?). Windows Mobile 6 is obviously programmed slightly different from revious versions, so updating Sync software is a simple step that's often missed...
Audio said:
I seem to be repeating myself lately with this answer, so I apologise if it seems down-right obvious, but have you ensured you have the latest version of ActiveSync/Windows Mobile Device Centre?
The reason I ask this is because I too was experiencing Sync problems using WMDV, but realised I didn't have the latest version (it doesn't automatically update with Windows Update, WTF?). Windows Mobile 6 is obviously programmed slightly different from revious versions, so updating Sync software is a simple step that's often missed...
Click to expand...
Click to collapse
Hi Audio,
Thanks for the reply, but I do have the latest version and I never had a problem with it until this week.
Just so i can try and help, what is it you are using Dave? AS or WMDV?
Audio said:
Just so i can try and help, what is it you are using Dave? AS or WMDV?
Click to expand...
Click to collapse
Hi Audio, I use both, AS at work and WMDV at home, both used to work fine.
And do you experience the issue on both?
EDIT: Apparently, there may be a problem with ActiveSync 4.5. Just take a look at this list of complaints about it lol.
One user stated:
"I was using AS4.2 with my ETen M700, everything was fine. I wanted to upgrade to WM6 and teh instructions said I needed to use AS4.5 I installed it and tried to connect my device - disaster! The rapimgr.exe process runs at 99% and slows the computer to a crawl.
After 3 attempts, I uninstalled it, and re-installed AS4.2 (available from www.microsoft.com) and now things are working again. "
This may be worth doing to see if this soilves your problem...
Audio said:
And do you experience the issue on both?
Click to expand...
Click to collapse
Yes I have tried it on three different machines, I can see the PDA but it won't sync or let me move or copy files.
It look like I might have to do a hard reset, but I'm hoping not
Also, a chap on a premium (you have to pay for support!) site said the following, which seems slightly similar:
"I've been using ActiveSync for a while now to sync outlook up to my motorola q. For some strange reason it's stopped working. The connection takes place, you get the little signal saying that ActiveSync picks up on it, the "Connecting" message, followed by the "Synchronizing" message... and nothing. It just hangs there. I've reinstalled ActiveSync and Outlook and did a hard reset on the phone. I'm convinced the issue is with the desktop, if I take the same PDA home, I'm able to sync up with my PC there. Does anyone know what happens during the Synchronizing phase and what could be possibly causing it to hang? ActiveSync 4.5 is a new beast, solutions to the older versions don't seem to apply.
If I hit the Stop button, ActiveSync hangs on the "Stopping" message and ActiveSync on the phone becomes unresponsive until I unplug the cable."
So even a Hard reset didn't solve this guys problems...
I would recommend uninstalling AS 4.5 from your machine, and installing 4.2. Reason being, i believe you need your phone connected to the computer when you install syncing software, so it more than likely "fiddles" with some very well hidden settings on the device. If this is the case, 4.5 may have [email protected] it up, but 4.2 may be your savior.
If you decide to give it a go, let us know how it goes...
Audio said:
Also, a chap on a premium (you have to pay for support!) site said the following, which seems slightly similar:
"I've been using ActiveSync for a while now to sync outlook up to my motorola q. For some strange reason it's stopped working. The connection takes place, you get the little signal saying that ActiveSync picks up on it, the "Connecting" message, followed by the "Synchronizing" message... and nothing. It just hangs there. I've reinstalled ActiveSync and Outlook and did a hard reset on the phone. I'm convinced the issue is with the desktop, if I take the same PDA home, I'm able to sync up with my PC there. Does anyone know what happens during the Synchronizing phase and what could be possibly causing it to hang? ActiveSync 4.5 is a new beast, solutions to the older versions don't seem to apply.
If I hit the Stop button, ActiveSync hangs on the "Stopping" message and ActiveSync on the phone becomes unresponsive until I unplug the cable."
So even a Hard reset didn't solve this guys problems...
I would recommend uninstalling AS 4.5 from your machine, and installing 4.2. Reason being, i believe you need your phone connected to the computer when you install syncing software, so it more than likely "fiddles" with some very well hidden settings on the device. If this is the case, 4.5 may have [email protected] it up, but 4.2 may be your savior.
If you decide to give it a go, let us know how it goes...
Click to expand...
Click to collapse
Hi Audio, I don't know what to do, I started another thread about no longer being able to either copy, move, delete, install or uninstall anything, I really don't think it's a sync problem anymore. I will wait another day or so and then I'm going clear storage and start again.
what really pisses me off is my wife has no problems at all? perhaps my PDA is ******.
Exactly the same has just happened to me - I tried to connect to ActiveSync this morning to copy a file across via bluetooth, but it refused to connect. I plugged in the USB cable, nothing - the phone charges but ActiveSync does not want to know.
I deleted the device in AS, tried to add a new one - nothing found.
I last sync'd up fine 4 days ago.
I am using Dutty's DualTouch v1.1 release.
I am using AS 4.5.0 build 5096
If I discover services via BT from the kaiser to the computer it finds the ActiveSync service.
I have done a soft reset, no difference, restarted the PC, same. I haven't applied any Windows Updates or made any changes since it stopped working.
I might try rolling back to AS 4.2
Edit: Same with AS4.2
Think it might be clear storage time
Cleared storage and then it worked fine...will take the opportunity to upgrade to dualtouch v2
Hi Blaze, damn it's annoying isn't it, my next move is clear storage as well.
Hope mine works again.
It's bloody happened again I reflashed the rom with Duty's Dual Touch V2. Much better rom, but activesync has just given up again via BT and usb. Maybe it's some inherent problem with WM, or with Duty's roms - which are you using Dave?
I've tried it on a fresh build of XP Pro on an old machine with nothing than AS & Outlook 2k3 on - same, AS sees the device, but wont sink. Problem seems with the device...
Dave... said:
perhaps my PDA is ******.
Click to expand...
Click to collapse
Sorry I cant help other than to say my dutty rom is working fine on WMDC.
But I had to post and ask why you asterisked out the "ed" and left the lrest of the word in?
Brilliant! Lmao! :d:d:d
unwired4 said:
Sorry I cant help other than to say my dutty rom is working fine on WMDC.
But I had to post and ask why you asterisked out the "ed" and left the lrest of the word in?
Click to expand...
Click to collapse
Good Point I didn't even notice, put it down to stress...
PS: For anyone who's interested, I ended up doing a hard reset, reinstalled my apps, restored my backups and it's working fine now.
Did you have F-secure Mobile installed? If not, I could take that away from possibilities that's causing this problem
Hi,
I am having trouble installing Fring on the latest Dutty Rom. Has anybody else experienced this problem?
I install the cab to either memory or storage and it still does the same thing... It just loads the splash screen up and hangs there?
I contacted fring about this problem and they replied with the following:
"Hello Colin,
Thank you for contacting our support team.
We are aware of the issue and working to solve it in the near future.
Make sure to check our blog for version updates http://www.fring.com/blog
Please feel free to contact us again should you have any further queries.
Thank you,
Neta
fring Support "
I see alot of people on this forum using Fring and I was just wondering how they went around installing it?
Thanks,
Colin Jensen
Worked fine for me on Dutty's V3 - I installed it and ran it with wi-fi turned off and was surprised that it automatically turned wi-fi on to connect.
Same here
Yeah, I got the same problem on my phone. I have had Fring on my before but it was acting buggy so I uninstalled it and looked for the newer version of it and tried installing it but I install it and like you said the splash screen comes up and just hangs.
Did you ever get it to work? I see that this is an old thread.
cjensen25 said:
Hi,
I am having trouble installing Fring on the latest Dutty Rom. Has anybody else experienced this problem?
I install the cab to either memory or storage and it still does the same thing... It just loads the splash screen up and hangs there?
I contacted fring about this problem and they replied with the following:
"Hello Colin,
Thank you for contacting our support team.
We are aware of the issue and working to solve it in the near future.
Make sure to check our blog for version updates http://www.fring.com/blog
Please feel free to contact us again should you have any further queries.
Thank you,
Neta
fring Support "
I see alot of people on this forum using Fring and I was just wondering how they went around installing it?
Thanks,
Colin Jensen
Click to expand...
Click to collapse
I had the same problem on my phone when I installed for a brief period of time last week. I ended up uninstalling......
i have installed the cab on a number of ROMS, never had any issue..
official tilt 6.0 rom didn't work, q mobile 1.2 rom didn't work...official tilt 6.1 rom, @ least it actually opens now (no more error screen) but doesn't get past loading. 3 roms, still haven't been able to get it working over here.
yep, confirmed, same problem, multiple roms, multiple ways of installing, multiple connections when opening program, Fring is still just stuck on the splash screen that says "Fring is loading" I had it working at one point in my Kaiser's life but nothing now seems to revive it, been trying for months, there are no fixes that I have seen online. Any good alternatives?
No problem so far.....
been using it for over 1month now....
installing and uninstalling for more than 8times
i justgot my kaiser....thats why with all thecustomization....
am using a russian Wm6.1 rom
I have the same issue
I tried every known fix that can be googled... I also contacted Fring... no help. It seems to be a huge problem with the 6.1 Roms. Someone here should have a fix...
Nope, it's fring's job to get it right, not much we can do... and they unfortunately dont seem to care much about WM6.1 users given the number of reports they've had for weeks/months about the problem and their everlasting "we're gonna investigate it" answer.
akadragon said:
I tried every known fix that can be googled... I also contacted Fring... no help. It seems to be a huge problem with the 6.1 Roms. Someone here should have a fix...
Click to expand...
Click to collapse
I have just installed Fring today on PDACornerUltimate ROM v15, it works properly.
I was able to make a SIP call to Fringe Testcall as well as SkypeOut call.
akadragon said:
I tried every known fix that can be googled... I also contacted Fring... no help. It seems to be a huge problem with the 6.1 Roms. Someone here should have a fix...
Click to expand...
Click to collapse
Yep, they just released a new version that works.
Language settings
I've the same problem with Fring that I've with google map.
My PPC regional settings are set to China, since it's the olny way to display chinese caracters everywhere in the OS (notice the OS is in English).
But, fring's language (like google map) is choosen according to those settings... it's very annoying.
Does anybody if there is a way to disable this feature (registry hack...) ?
Thanks,
Fring on kaiser
i just installed fring on my kaiser im using duttys_wm6.1 hybrid v2 and dont have a problem with it. it loaded up properly and everything seems to be working. my only thought is maybe a high amount of cpu usage, (programs that are running from start-up?) that is slowing everything down and causing the app to hang of freeze. thats just my thought. im probably wrong. anytime i have an issue with any kind of app freezing of not starting up thats usually were i look first. i hope that this helps. if not im sorry and at least i tried.
John
Hi,
A few days ago the youtube application stopped working. It does't load the the first page anymore and I can't search anymore. It just says there are no video's. I still can see the video's I put in my bookmarks and video's that are in history though. Anyone knows what to do to solve this?
Thanks.
you're not alone in this...
Xevor said:
Hi,
A few days ago the youtube application stopped working. It does't load the the first page anymore and I can't search anymore. It just says there are no video's. I still can see the video's I put in my bookmarks and video's that are in history though. Anyone knows what to do to solve this?
Thanks.
Click to expand...
Click to collapse
Hi,
We are discussing this problem in the Raphael forum.
http://forum.xda-developers.com/showthread.php?t=432554
Maybe the solutions posted there work for you.
Scott
Rahza said:
Hi,
We are discussing this problem in the Raphael forum.
http://forum.xda-developers.com/showthread.php?t=432554
Maybe the solutions posted there work for you.
Scott
Click to expand...
Click to collapse
Thanks for the link, I'll keep an eye on that topic. I tried all the solutions in that topic but none of them worked. But I saw that most of the people with the same problem are Dutch too just like me and I also use KPN like me..
this is becoming very popular....
i have a week searching for any solution but till now nothing...
i have the problem me too.Maybe I will try to solve it with storage clear.
*** Not works!!!
Damn that's so nasty!What a f**k is going on with HTC ??!!?!
Hi,
i have the problem too, since yesterday.
I am german (vodaphone). I can still watch the vids bookmarked and in History. The first page doesn't load anymore and i can not search anymore...
I use the htc 1.93 GER Rom and Radio .08.
I also use SPB Mobile Shell and SPB Phone Suite. These are the programs i installed a few days ago...
Any Idea?
thx
Neutrum.
i had this problem after deleting the "Youtube" folder in Internal Storage.
Worked again after flashing a new ROM.
All,
I have had this problem too, I do not know if you have encountered the same issue with GPS Fix at the same time (whereby it does not update, no matter which connection type you try). If this happens then you will need to hard reset the device, sorry but this is the only way that actually works!
which are the bottons for hard reset on HTC DIamond?
rocky50 said:
which are the bottons for hard reset on HTC DIamond?
Click to expand...
Click to collapse
http://www.hardreset.eu/htc_touch_diamond_hard_reset_soft_reset_en.html
a hard reset doesn't always work, atleast it didn't work for me.. I tried it twice without result
let's write emails to HTC ....
It just started working again.. After my sister touched the phone
I've written an email to HTC.They answered me that 'Google' have updated their YouTube server and this is having an impact with the You Tube application on our handsets.This is something that can only be resolved by Google but HTC are working on finding another technical solution for HTC devices.
i had same prob, but kinda solved it.
load up youtube app, and when the sign pops up saying no vids found, leave the app running in background and return to ur home screen. leave the app running for a little while and it should load up videos like normal, just exit the app and open again, it shouuld start working fine.
Thank you woburnshah but right now,it works excellent!Without any problems.Maybe the problem has been solved!
I had same problem. "No Video" ,
as I saw in the link to Raphael ,
I closed YouTube application , open IE (you can find it under Windows) and then open Youtube again(while IE stay in background) , now it's working...no needs to open IE again after first time..
Mine had begun working normally again and I did nothing so they must have found a fix on the other end?
krabman said:
Mine had begun working normally again and I did nothing so they must have found a fix on the other end?
Click to expand...
Click to collapse
just checked and now mine is good too. funny how it only affected some people huh?
So I can crash windows mobile in areas of my town where there are lots of wireless access points. The wifi is on when the crashes happen. I propose that WM6.1 can not handle the large volume of aps in these areas. HTC is giving me the run around and saying it is a hardware problem. It only happens when I am in range of many aps(I would guess approx. 30).
To get the crash I boot the phone up with wifi already on and with 30sec to 1 minute. I get a "We're Sorry" box from Microsoft telling me something crashed.
I will attach my dump files in hope that someone here can read the dump files.
Has anyone else seen this happen?
I am using the below rom but skipping customizations install after the flash.
Rom:3.57.502.2 Radio:1.65.21.18 OS:19214 Build:19214.1.0.4
well is it telling you what app is crashed, and is it stopping your from connecting to an ap and browsing?
Ok so what app crashed. I am aware that on some of the dumps navizon was open at the time. So it may say that it crashed. But some of the other dumps I had no programs open.
Any suggestions on why it crashed and what i can do to prevent it from happening.
Anyone else have any suggestions or able to read the error logs.
wzc
Hi,
I own a SE Xperia, and I have a similar problem. At my desk at work, there are more than 40 nearby access points, so when I turn on wifi, I get the device.exe crash, and I cannot connect to any of them. I think the problem is in the wzc of windows mobile. Becasue when I use odyssey access client, it can scan and connect to aps without any problems. I tried using different wzcsvc.dll, I tired playing with the tnetw12511 registry settings, but couldn't find a solution.
Any suggestions?
I went to a custom rom and it fixed the problem. Either the custom rom drivers or the extra 20mb of ram that are now available caused the problem to go away.
drewcam888 said:
I went to a custom rom and it fixed the problem. Either the custom rom drivers or the extra 20mb of ram that are now available caused the problem to go away.
Click to expand...
Click to collapse
Which rom did you use?
I have used about six tilt roms and none have frozen. Listing them doesn't do you any good since you don't have a tilt.
drewcam888 said:
I have used about six tilt roms and none have frozen. Listing them doesn't do you any good since you don't have a tilt.
Click to expand...
Click to collapse
Could you please extract and send me the "TNETW1251.dll" and "wzcsvc.dll" files under windows?
Thanks in advance
I don't have the WZ file. The other is attached.