Battery Display in Top Right Displaying Incorrectly - Tilt, TyTN II, MDA Vario III General

**(SOLVED)**I have a slight problem that started recently with my phone, and was hoping someone would know a possible solution or have heard of something similar.(before i go on, i have searched around the forum for a while, and saw no issue that is very similar)
Firstly, i have the stock htc/at&t rom, stock radio, basically everything out of the box aside from a bunch .cabs and games.
Basically, on my today screen, in the top right corner it displays the network coverage (i.e. 3G, HSPDA, EDGE, etc...), the volume setting of my phone(ring, vibe, silent), the battery icon, and the task manager.
Currently, the battery status indicator says full, however when i touch it and the battery power remaining screen comes up it shows 55%.
What i have figured out has happened is that the battery icon in the top right will display whatever charge the battery is at when i turn on my phone, for example if my phone is plugged into a charger and i turn on the phone, until i reset my phone it will display it as being plugged in. So while once i click on it - it will show me the correct battery power remaining, the actual icon itself is not working properly.
[its not so much the that it not working affects me very much, its the fact that it should be working and isnt is quite irritating]
currently the .cabs i have installed are:
HTC home customizer
Pandora Touch 3G dialer
A_C S2U2 (slide to unlock)
pocketmax quote today
jizy HTC action screen
HTC HTC Plus
Spb Time
HTC HTC Home
Of those, i have narrowed it down to probably being cause by the Slide to Unlock program, 3G dialer, or the HTC home customizer, but these are just guesses based on the time i installed the .cabs(usually do a few at a time), and when i noticed the problem started occuring.
As well i might mention that the .cabs i installed might not be the most up-to-date, so if anyone knows that an older version of a cab i have produced a similar problem, than it might be because i have that older version. like i said i have searched for a solution to this problem, but haven't had any successful results.
thanks.

bump.
bumpity bump bump.

did you ever install the battery icon installs from the thread below?
http://forum.xda-developers.com/showthread.php?t=289003

also you can check this registry key...
HKLM/securoty/resover/bitmaps
If you have 2 keys in there titled "BatteryIconIdStart" and "BatteryIconLevels", that could also be the issue.
Let me know if you have either of these keys in your registry.

Solved
tnx for the suggestions guys, but i found the problem to be in the Touch 3g dialer(not sure exactly where).
Uninstalled and problem is fixed.
So a word of warning, Don't Install The Touch Dialer. lol.

CLOCKWO12K said:
tnx for the suggestions guys, but i found the problem to be in the Touch 3g dialer(not sure exactly where).
Uninstalled and problem is fixed.
So a word of warning, Don't Install The Touch Dialer. lol.
Click to expand...
Click to collapse
I am having the same problem... just uninstaller the touch dialer, but unfortunatley, did not seem to fix the problem. I'll try reinstalling the battery status icon's mentioned above as well (I had previously installed them) in the morning... but for now need to get to sleep. I would like to know if anyone else using the touch dialer is having this issue though.

Related

GPS running in background?

Hi,
yesterday I went to the cinema and therefore turned my phone in the comm-manager off (not the whole pda, just the phone)... battery level was about 60%.
After 1,5 hours I looked at my diamond - battery level was only 20-30% and the back/bottom of the pda was really hot.
I opened the freeware task manager from http://www.dotfred.net to check if tomtom or anything else is running in the background, but I couldn't find any gps related task... (also neither bluetooth nor wifi was activated)
Restarting the PDA solved the problem (battery level was constant now, the temperature became cool)...
Now my questions:
1. How to determine if GPS is running (what is the process name or is there a tool to check if it's running or to manually deactivate it?)
2. Has someone else made this experience
Thanks for your help!
ageye
Well, perhaps you have already found a solution, but incase you haven't - on the home screen / Today screen, at the top, next to the battery Icon - you will see the default task manager.
Tapping on that will show you all the applications that are running.
You can close either one of them by tapping on the X next to them, or you can choose to close all of them by tapping on the X at the top (first Icon from the left)
ageye said:
I opened the freeware task manager from http://www.dotfred.net to check if tomtom or anything else is running in the background, but I couldn't find any gps related task... (also neither bluetooth nor wifi was activated)
Click to expand...
Click to collapse
well, I already checked everything - there was no application running in the background that accesses gps (at least none I know - windows service?)
Maybe it is related to sudden drain issues... see both topics:
(first one starts on page 2, as the first page is only bickering by me )
http://forum.xda-developers.com/showthread.php?t=405383&page=2
http://forum.xda-developers.com/showthread.php?t=405958
I don't think so... my battery lasts pretty long - only in this 1,5 hours it drained like hell...
and due to the fact that its back was really hot I supposed the gps to be running
if it only happens once, why care?
could have been a program that wasn't ended correctly and produced a high cpu load (also happens on desktop computers). Which isn't whown at the task manager. Maybe it was a serviece running in the backgorund that coause that load. That the softrest fixed that issue is an indication for me that i might was such a problem.
there is actually a reason for the massive battery drained.
i have tried several types of gps applications on my diamond and some of them just doesnt close the GPS after exiting the program. thus, this results in major battery drainage.
i am not sure what gps applications do you have on your device. but, what i did is to reset my device everytime after using gps. this is the safest way to make sure that the gps is turn off.
unless, someone is able to provide a small tool to off the gps.
cool, I'm not the only one -
I'm using TomTom and I think at this time I also used run.GPS...
I also hope that someone can provide a small tool to check if GPS is running and to close it (Today plugin?)

Problem with PocketShield

Hi,
does anybody here use PocketShield?
I experience a strange problem - time to time when I unlock my phone the whole top bar disappears. The Start button, the Close button...everything.
I can't do anything with the phone - the only solution seems to be to navigate to the programs tab (via TF3D), select All programs and run the Lock - this locks the phone again and when I unlock it then suddenly my top bar is back. It seems to be completely random.
I know that there is a forum on the developers site but I was wondering if any of the bright minds here could help me ;-)
I am running the 2.0.6.2 free version.
I will try to post it to the official forum as well.
Cheers.
ferus said:
Hi,
does anybody here use PocketShield?
I experience a strange problem - time to time when I unlock my phone the whole top bar disappears. The Start button, the Close button...everything.
I can't do anything with the phone - the only solution seems to be to navigate to the programs tab (via TF3D), select All programs and run the Lock - this locks the phone again and when I unlock it then suddenly my top bar is back. It seems to be completely random.
I know that there is a forum on the developers site but I was wondering if any of the bright minds here could help me ;-)
I am running the 2.0.6.2 free version.
Click to expand...
Click to collapse
Mine locks up when Gyrator2 tries to rotate the screen on incoming calls. Really annoying. I want to be able to rotate my screen in most programs, but it always seems to screw up my incoming calls and creates more lag...I'm gonna try to go back to sensorlock instead of pocketshield...
I will try to post it to the official forum as well.
ferus said:
Hi,
does anybody here use PocketShield?
I experience a strange problem - time to time when I unlock my phone the whole top bar disappears. The Start button, the Close button...everything.
I can't do anything with the phone - the only solution seems to be to navigate to the programs tab (via TF3D), select All programs and run the Lock - this locks the phone again and when I unlock it then suddenly my top bar is back. It seems to be completely random.
I know that there is a forum on the developers site but I was wondering if any of the bright minds here could help me ;-)
I am running the 2.0.6.2 free version.
I will try to post it to the official forum as well.
Cheers.
Click to expand...
Click to collapse
I had to same problem. I had Gyrator2 running which rotated the screen and screwed up Pocketshield screen.
I put an Event in Gyrator2 to disable rotation when in PShield screen.
The Event should be the same as Manila's except application/window title is "PShield"
That fix the problem.
i get odd issues as well
I agree, I get odd issues as well. I get the occassional hang, crash, missing bar etc. I uninstall pocketshield and I don't get issues. I'm using NATF 2.3 rom. I paid for it and it worked ok for a while until I noticed these intermittent problems...
wmserver said:
I had to same problem. I had Gyrator2 running which rotated the screen and screwed up Pocketshield screen.
I put an Event in Gyrator2 to disable rotation when in PShield screen.
The Event should be the same as Manila's except application/window title is "PShield"
That fix the problem.
Click to expand...
Click to collapse
I created a rule in Gyrator almost immediately after installing PS - I didn't want it to rotate the PS screen.
I left it up to Gyrator to get the window name and now my rule is set for the window #NETCF_AGL_BASE_.
But my problem is not in rotating, my problem is in unlocking (at least I think so). Anyway, will try to change the window name to PShield and see if it makes any difference.
EDIT
Nope it didn't. The top bar disappeared again during the first seconds of my testing :-(
ferus said:
Hi,
does anybody here use PocketShield?
I experience a strange problem - time to time when I unlock my phone the whole top bar disappears. The Start button, the Close button...everything.
I can't do anything with the phone - the only solution seems to be to navigate to the programs tab (via TF3D), select All programs and run the Lock - this locks the phone again and when I unlock it then suddenly my top bar is back. It seems to be completely random.
I know that there is a forum on the developers site but I was wondering if any of the bright minds here could help me ;-)
I am running the 2.0.6.2 free version.
I will try to post it to the official forum as well.
Cheers.
Click to expand...
Click to collapse
An updated version has now been released (9th Dec) to fix this problem...
rmjjjt said:
An updated version has now been released (9th Dec) to fix this problem...
Click to expand...
Click to collapse
Thank you my friend for letting me know. If this is indeed fixed I don't mind paying the $13. Will check it right now.
New version available today - but it's not working correctly. after I use the slide bars one time to ignore a call, every call after that is missing the slide bar (answer and ignore soft buttons are there though) and when caller hangs up before I take any action PS just sits there, like it's stuck. Sounds like the same problems you describe earlier.
Im using PocketShield, but I was wondering - the phone always locks after I insert the stylus (I have Touch HD), after a while PocketShield kicks in and after that if I want to unlock the device, I first have to unlock the "normal" lock and then the PocketShield. Really annying.
Is there a way to disable the lock after stylus insertion?
chetlet said:
New version available today - but it's not working correctly. after I use the slide bars one time to ignore a call, every call after that is missing the slide bar (answer and ignore soft buttons are there though) and when caller hangs up before I take any action PS just sits there, like it's stuck. Sounds like the same problems you describe earlier.
Click to expand...
Click to collapse
actually i just experience this an hour ago.. also every time I slide the keyboard to unlock my Fuze the screen freezes on the landscape mode. all keys on the keyboard besides the windows key. I hope they fix these bugs right away..
I have the same problem with the top bar disappearing. I'm not running Gyrator or anything like that. I'll try a new version when the bugs mentioned have been ironed out. It is a great product though. I do like it.
Are any of these being posted in the PocketSheild forum? They need to know the bugs.
cheez said:
Are any of these being posted in the PocketSheild forum? They need to know the bugs.
Click to expand...
Click to collapse
yes many people posted on the pocketshield forums with same issues...
i dont know if anyone else is having this issue... but
i seems that when slide to answer is activated PSPP some calls get answered automatically... and it takes me to the "talking" screen immediately.
any help on this issue would be super!
I'm having other issues with PocketShield. I didn't have this same problem with version 2.0.6.3, but with version 2.1 I started to have problems with my alarm notification. When the alarm goes off, it just quickly vibrates once and just stops if it's in a locked state. Also, I noticed a heavy battery drain issue--the battery charge would drop about 10% each hour. Once I uninstalled it, the problems with the alarm and battery drain stopped.
Even with the new version (2.1.0.1) I still have problems answering phone calls. I'll slide to answer and the phone just keeps ringing. I hit the "Send" key and nothing happens. I hit the "Answer" soft key and still nothing....
Anyone else still see these problems?
I have a different issue, when phone is not locked and I have an incoming phone call, pocket shield kicks in and shows me "lock screen" where I have to slide to unlock the device and only then I get the standard "Incoming call" screen...
v2.1.0.1
Major Problems
Well I was gonna pay for it but their payment server seems to be phishing site. Also it crashed SQB and when I uninstalled it, the program removed my outlook email account. Sorry but looks like malicious program so going back to an old sensor lock. I did like the software interface but Paypal confirmed me, so I shouldn't need to give you my personal information to pay for the software. No shipping means I am not giving you my phone number and address, etc. Sorry too many questionable things going on for a screen lock... rule is KISS and since this programmer isn't doing that then dump it off my device is my rule.
Neo_ said:
I have a different issue, when phone is not locked and I have an incoming phone call, pocket shield kicks in and shows me "lock screen" where I have to slide to unlock the device and only then I get the standard "Incoming call" screen...
v2.1.0.1
Click to expand...
Click to collapse
version 2.1.0.4 is out and is supposed to fix that problem..
I ran the site and its fine why do you say its a phishing site?

Xperia - HTC Diamond touch - problem with clock

Hi,
I'm a victim of weird problem that occurs on my SE Xperia X1 phone and affects the clock.
Generally, after going into standby mode something is happening with system clock and after switching the phone on the clock is late - sometimes just few minutes, sometimes few hours.
This bug appears only sometimes and the soft restart seems to solve the problem for a while (the clock updates itself to correct time), still it is very unfortunate bug, especially when you use a phone as a alarm every morning
Did someone had such problems with X1? and perhaps know the way to solve this problem?
best regards
piotr
my x1 seems to freeze about once per day when docked. usually the only way that i notice is when the clock is stuck (i.e it's still stuck at 15:30 when it's 16:15). the other thing that happens is that for some reason the default theme is applied when i open the start menu (i.e the start menu colour is the same as the genric windows theme colour) ...
a reboot fixes this issue. so far this has only happened to me when i've been docked (as far as i'm aware) so it may have something to do with activesync ... ?
hardreset is the fastest way to solve "strange" problems.
do it and check without installing anything. if it happens again your xperia has something bad, if it happens again after installing software, then there's some program causing it.
I got the same thing.
Very annoying.
Only noticed it with the new R2A roms though..
Calvin H said:
I got the same thing.
Very annoying.
Only noticed it with the new R2A roms though..
Click to expand...
Click to collapse
doh ! i was hoping that the new firmware solved the problem. :-(
Thanks guys! Today I updated Xperia to R2AA10 and so far I did not install any new software (it is hard to resist though. I'll let you know if that solved clock thing
Guys after the R2AA10 update the clock problem is still there. No programs install for 2 days, and today suddenly, clock has gone 1 hour back...
What is going on?
This happens only in 2nd and 4th panel. The clock is normal in the 1st panel, and in the panel with the fish...
What should i do? I tried soft, hard reset, everything!
polakis21 said:
Guys after the R2AA10 update the clock problem is still there. No programs install for 2 days, and today suddenly, clock has gone 1 hour back...
What is going on?
This happens only in 2nd and 4th panel. The clock is normal in the 1st panel, and in the panel with the fish...
What should i do? I tried soft, hard reset, everything!
Click to expand...
Click to collapse
I would not say it is a matter of panel - on my Xperia this problem occurs in first panel (even after updating to R2AA10
Hello,
I have the same problem with the Htc Touch Diamond after updating to the latest official ROM:
ROM: 2.03.483.1 FRE
Radio: 1.09.25.23
Protocol: 52.51.25.26H
Windows Mobile 6.1 build 20764.1.4.3
I think it might be due to some bug in a power saving feature...
Has anyone got a solution?
I have a part solution
it happens on the SPB panel for me, its the 4th panel for me also.
if yours it the 4th panel too then try moving the panel to another place.
if that doesnt work then i know this deffo works as iv used it, goto the today panel, leave it there for a few minutes (10-20) then go back to the panel which has got the bug, you will notice the time will be in sync and the problem goes away. It happens from time to time, sometimes weeks apart so as much as its a pain, i can live with it. I dont know if it affects the alarm when the time stops.
I have the same problem with the clock. Was looking for a solution here and found this topic. Funny thing is, I have also the spb mobile shell panel and it is on the 2nd place. I will try the trick of safdl and hope that the problem will solved. And about the alarm, freezing of the clock doesn't effect the alarm.
Same here
The same problem here with an HTC Diamond Touch... however it looks very random to me. Any solution or clue about what is happening?
I solved this
My Touch Diamond had the same problem : the clock was never right. so I downloaded the advanced configuration tool and turned on every single power management option and it seems to have fixed it. hope it will work for you too.
I tried this one. But it's not WORK!!!! HELP!!!
Vapaus00 said:
My Touch Diamond had the same problem : the clock was never right. so I downloaded the advanced configuration tool and turned on every single power management option and it seems to have fixed it. hope it will work for you too.
Click to expand...
Click to collapse

Questions about Fresh ROM 1.1...

First things first... Long time reader, (well, since november) but a first time poster ... Ive learned an unbelievable amount from this site, and am currently running Fresh ROM 1.1, and LOVING it
However, i have a few questions... I figured it would be easier to condense it into one thread, unless i need to make more...
1. Im loving the new blueish theme. However, even with older versions, and the stock rom, i cant ever tell how much battery life i actually have.. I was wondering if it were possible to have a text indication as opposed to an icon? I remember reading somewhere that the OS only supports 20% (i think) increments... but even so, it would be easier to figure out how much battery i have. Im guessing its some type of image(s) that just update according to the reported battery percentage, but i have no clue.. If thats so, could the images be replaced with images containing text? I figured if this was possible, it could be applied thru a ROM update.zip (as done from recovery).
2. I don't know if this is a Fresh ROM "bug" or not, but i was on the phone the other day, and when i pulled it away from my face to turn the screen on, then disconnect the call, i had to drag down on the screen like it was locked. Now, this was a three way call, and my first ever on this phone. So thats why I am unsure if its even a bug... Perhaps its meant to be? I just found it odd.
3. MMS over WiFi problem... This was brought up in another thread that never received a reply... I doubt this is a Fresh ROM problem, as i had the problem on stock rom as well: when WiFi is enabled, I am unable to send OR receive any MMS messages. The message will show up in the chat log, BUT, when i press "download," the EVDO icon pops up in the status bar for a split second, then disappears and the picture does not download. As soon as i turn off WiFi and press download, it downloads it with no problem. Anyone know what is causing this? and is there a workaround? Or do i just have to turn off wifi for MMS? I thought the system would be smart enough to turn on & use EVDO when needed.
Thanks
Ben
Look into the Tsowen(sp?) battery icon for that. It was the default in 1.0, but if you're interested in accurate battery percentages, the HTC Battery Widget from the market place gives info on voltages, heat, battery type, and level down to 1%.
thanks for that.. i didnt think to look in the market. not exactly what i was looking for but itll do lol.
also you may want to try Power Manager from the market, it has a very accurate percentage readout along with the ability to limit certain things from running at lower battery life, such as dimming the screen automatically and also turning off wifi and gps and whatnot. it has saved me on trips to Philly a ton of times!
1.1 fresh copy paste from gmail no longer works
I usually during work have to touch my email screen when i have the gmail application up and it normally grabs the address thats on the screen in the body of the email......with the new fresh 1.1 it doesnt anymore. Is there a fix for this???
thanks
yeah the apps work. i was just hoping there was some way to replace the icon in the notification bar with text.

[Q] HTC One top touchscreen problem - Bug or Hardware fault?

Hey,
I have an HTC One black - stock os - UK unlocked version - after 4.2.2 update.
I've got a strange problem regarding the top of the touchscreen. when the phone is horizontal, the top bit (between the top bar to the first widget) is not working. the rest of the screen working fine. when I pick the device up, the screen is working fine 70% of the time. as a result, I cant open the notification bar and it thinks that I'm clicking or re-arranging my widgets.
It's weird because IT DOES work 60% of the time.
1. did any of you experienced any of this before?
2. What do you think it is? software or I have to replace the digitizer?
3. Is it just calibration problem? I tried to calibrate the device using the keyboard screen calibration and it didn't do anything.
Thanks!
Eran.
i have a similar problem and no solution so far
sandmann241 said:
i have a similar problem and no solution so far
Click to expand...
Click to collapse
so what did you do/planing to do?
eranbaruch said:
so what did you do/planing to do?
Click to expand...
Click to collapse
Bump for more responses
I
I just started experiencing this same problem today as well. I was on a Google Edition 4.3 Rom for about 2 days, Viper 3.2 I believe and everything was initially working as it should. Suddenly I began experiencing the non responsive status bar. I cleared data & cache, fixed permissions, and even tried a factory reset with no luck. I then reinstalled the Rom and the problem persisted. I then downloaded and installed black jelly Rom along with a complete wipe of the entire storage after transferring important data to my PC, but the status bar was still unresponsive and it appeared the top 1/4 inch of display had a digitizer issue. I tried to restore an older backup of Venom Rom running Sense and I still had no luck, until I went into the browser so that I could rotate into landscape to see if I could access it from this orientation (don't know why that didn't cross my mind sooner?) After I pulled the notification shade in landscape I left it down and rotated back into portrait mode and drew the shade back up slowly, following through with the gesture all the way to the top of the display. Then the functionality from portrait was restored! I believe this is a software bug of some sort, but I'm contemplating returning it to stock and relocking the bootloader to return it. I'm actually using the Tmobile variant and it's only about 30 days old. My insurance will cover a replacement for a faulty unit, but who knows if will happen with another? After a Google search I discovered this was an issue that surfaced with quite a few One X's as well, so I'm thinking it may be a bug that's consistent with some HTC hardware of a different variants? Any updates or insight would be appreciated.

Categories

Resources