Tilt NOT going to sleep - Tilt, TyTN II, MDA Vario III General

Has anyone noticed on either the Tilt or Kaiser that sometimes the device will not enter sleep mode?
It seems like when my Tilt running the stock AT&T Rom is on AC power, it will not enter sleep mode even though I have it set to sleep after 5 minutes on AC power. This is not while connected via USB to a PC running ActiveSync as that WILL keep the device alive, I'm talking about connected to the power brick.
After 5 minutes the screen will dim but not sleep. Running on battery power the timeout will usually happen. If it doesn't sleep the display just dims like it did above.
Settings for power are set to shut off after 5 minutes.
Any ideas?
Todd

I've noticed that mine does the same thing, just doesn't turn off when plugged into AC. I'm not aware of any "fix" for it persay, I just dismissed it as a minor bug of the OS. I would be curious if if anyone does have a solution to this, but it's not that big a deal IMO.

I noticed it also, but don't care. However, if it happens while on battery, try changing the time to something else and then back. My battery was draining QUICK and finally I realized that it wasn't turning off. Doing the above fixed it.

Thanks for the replies. Not that I feel better about it but at least others have the same issue. It's not a big deal if plugged, just wondering why.
Todd

I just got into the habit of manually hitting the power button and putting it to sleep before holstering it and right after pluging it in.
Same here, it would go to sleep on DC power but would stay awake on AC power.

Dont worry.
I'm sure it goes into sleep when you press the power button.

Ahhh, is that what that button is for?!

Related

backlight won't turn off

I notice that my X1 backlight won't turn off.
Even if I set backlight to off after some time, the light just become less bright but not totally off as compared with my HTC Hermes/Tytn.
Is it a "feature" for X1? Will it hurt the LCD if the backlight not turn off, especially that I usually leave it on while charging with USB of my PC?
The backlight dims to minimum instead of turning off completely. If you are connected to a PC it won't turn the screen off, despite the setting in power management. If it is charged with a charger (not PC connected) it will turn the screen off if it is set up to do so.
Tap the power button to turn the screen off and disable the touch feature... key's remain unlocked and apps keep running
I am having a similar issue, if I push the power button to turn off the screen, it turns off, but then 5-6 seconds later it comes back on, this is after a hard reset and no other programs. Any idea what could be causing this?
Hey I just started having the exact same problem today. Turn off backlight with the power button, moments later it comes back on. This 'ghost' activation is inconsistent. Sometimes it doesn't come on for a while, but it will eventually come on.
About 2 weeks ago I spilled some water on it. I dried it out with a hair dryer and all seemed fine but now I'm wondering. It's almost like the power button is shorting out, turning the darn thing on. Any clues or solutions out there?http://forum.xda-developers.com/images/smilies/confused.gif

Cm7 charging screen timeout & charging

Where is the setting to make the nooks screen time out, and turn off while charging? Secondly does anybody have any idea why my tablet has been charging so slowly lately?
Sent from my MOTWX435KT using Tapatalk
i think screen stay on while charging because "charging" is one of the possible SOD cause. That's why there is no options (and it's charging slowly because the screen is on..)
Ok thanks, I thought the sod problem was fixed.
Sent from my MOTWX435KT using Tapatalk
Just press the lock button after you plug it in.
Sent from my LG Optimus V using Tapatalk
I normally do turn off the screen when I plug it in, but until just this morning the nook would die in my book bag due, to it waking up when the nook button was hit in my book bag. Thanks to somebodies help I rectified that problem this morning, but long story short I would charge it when I would go to bed, and it would be too dead to turn on when I plugged it on, so by the time it was ready to have the screen turned off, I would be asleep. Sorry for the long post.
Before I went to bed last night (11:40-ish), my nc was at 48% charge. This morning I woke up (7:30) and my nook was dead. About an hour later after charging it for a bit, I noticed my screen somehow turned back on and I hadn't even touched it. It seems the screen timeout is broken, or the option screen always on when plugged in is broken, because I double checked to make sure it was off. Btw I'm on Nightly 177
May just be my nc though.
turdferguson92 said:
Before I went to bed last night (11:40-ish), my nc was at 48% charge. This morning I woke up (7:30) and my nook was dead. About an hour later after charging it for a bit, I noticed my screen somehow turned back on and I hadn't even touched it. It seems the screen timeout is broken, or the option screen always on when plugged in is broken, because I double checked to make sure it was off. Btw I'm on Nightly 177
May just be my nc though.
Click to expand...
Click to collapse
It is not broken, nor is it your nook... this is common just like stock B&N ROM works.
If it is dead when you connect charger... when it gets around 15% it turns on... if it is not dead when you connect charger... it does not go into sleep... you have to manually turn off screen by short pressing power button.
Its availabe under Settings->Applications->Developement->Stay awake
but this never works for me here(unselect above option), my screen will never turn off automatically on CM7 while charging.
It does seem like the nook is charging much slower on CM7, even when the screen is off, I remember it charged fairly quickly on stock, but on CM7 it seems like it takes hours, I have left it charging over night, and it has not charged all the way before. I could be wrong though.
arda99 said:
Its availabe under Settings->Applications->Developement->Stay awake
but this never works for me here(unselect above option), my screen will never turn off automatically on CM7 while charging.
Click to expand...
Click to collapse
I have the same problem too. Is there a way to resolve it? The reason I'm asking is before I turn my device off and go to bed while leaving it to charge and when I wake up, the device is somehow turned on (I have come to realise that the NC turns on by itself at random while charging) and the screen never goes to sleep which causes my NC not to be recharged even after a whole night.
To actually turn the NC off when charging you have to attach charger... THEN hold the power button in until you get the power menu... select Power Off
DizzyDen said:
To actually turn the NC off when charging you have to attach charger... THEN hold the power button in until you get the power menu... select Power Off
Click to expand...
Click to collapse
Of course I did that. What I'm saying is that my NC still randomly boots up. Sometimes after a few minutes, sometimes after a few hours.
dawnjc79 said:
Of course I did that. What I'm saying is that my NC still randomly boots up. Sometimes after a few minutes, sometimes after a few hours.
Click to expand...
Click to collapse
Mine does that too (turning on while charging from powered off). It is telling you that it is now charged enough to operate. My solution was to not let it run down so far before you charge (below 15%). And don't turn it completely off. Plug it in and just turn the screen off. Then it charges the whole night without turning the screen back on.
I wonder if it would be possible to have the nook color shut back down if it loads into the os or recovery from a charger activation.
With mine as Long as the battery isn't dead when I plug it in, If I turn it off while its plugged in and not move it at all it stays off, but if I move it in any way it turns back on. Don't know why but movement fires it back up when plugged in.
Sent from my NookColor using xda premium
Seems to be a bad connection....same thing happens wirh my nook also...I plug the cable in, put the nook on one of my floor shelves, turn it off, and leave it to charge overnight....then again ANY kind of movement while the cablle is plugged in to charge OR use usb storage makes it disconnect....maybe a bad cable, unfortunately I haven't found them in stores anywhere lately..
Sent from my R800x using xda app-developers app

Very weird laptop problem

Hi
So I have an Acer Netbook, the D620.
Earlier, I closed the laptop (not shutdown)
and as usual the CPU lights went off with the power light flashing indicating standby.
After an hour or so, I saw all the lights except the WiFi one were on, (power CPU and Ram) . When I opened the lid of the laptop, it didn't come out of standby mode. Just a black screen
I did what any Android user would do. Pulled the battery. It rebooted fine.
This has happened like 5-6 times now. Any ideas?
QuantumFoam said:
Hi
So I have an Acer Netbook, the D620.
Earlier, I closed the laptop (not shutdown)
and as usual the CPU lights went off with the power light flashing indicating standby.
After an hour or so, I saw all the lights except the WiFi one were on, (power CPU and Ram) . When I opened the lid of the laptop, it didn't come out of standby mode. Just a black screen
I did what any Android user would do. Pulled the battery. It rebooted fine.
This has happened like 5-6 times now. Any ideas?
Click to expand...
Click to collapse
Reinstall Windows(or Linux or whatever you have on there). Works every time.
What you have to do is smack the keyboard really hard at least 2 sets of 10 times. If that doesn't work, then you have something running in the background, which makes your laptop wake up. When you open it, just wait a minute and it will turn on.
jaszek said:
What you have to do is smack the keyboard really hard at least 2 sets of 10 times. If that doesn't work, then you have something running in the background, which makes your laptop wake up. When you open it, just wait a minute and it will turn on.
Click to expand...
Click to collapse
I waited for an hour. Nothing happened.
That was your laptop going from sleep to turned off. if that happens again dont just pull the battery, just press the power button and hold it for about 10 seconds. once its off just press it again to turn on.
greeky510 said:
That was your laptop going from sleep to turned off. if that happens again dont just pull the battery, just press the power button and hold it for about 10 seconds. once its off just press it again to turn on.
Click to expand...
Click to collapse
It doesn't go from sleep to turned off. It goes from sleep to lights on but blank screen mode.
I need it to stay in sleep because overnight it switches itself on and by morning I have 10% battery
greeky510 said:
That was your laptop going from sleep to turned off. if that happens again dont just pull the battery, just press the power button and hold it for about 10 seconds. once its off just press it again to turn on.
Click to expand...
Click to collapse
then there is something that prevents it from turning off or hibernating. Go to your power settings and make sure that there is nothing like turn off after 1 hour of being in sleep mode or something like that. Why arent you turning it off or putting it in Standby mode? Standby still resumes fast.
greeky510 said:
then there is something that prevents it from turning off or hibernating. Go to your power settings and make sure that there is nothing like turn off after 1 hour of being in sleep mode or something like that. Why arent you turning it off or putting it in Standby mode? Standby still resumes fast.
Click to expand...
Click to collapse
Sometimes I'm in a hurry and I can't put it in standby. I'll see the power thing though
QuantumFoam said:
Sometimes I'm in a hurry and I can't put it in standby. I'll see the power thing though
Click to expand...
Click to collapse
You can use the power settings and tell the laptop to go into standby when you close the lid.
And make sure you have hybrid sleep mode disabled.
Sent from my NookColor using XDA

[Q] screen keeps switching on

my s3mini keeps switching on resulting a very heavy battery drainage... when i pressed power button, it goes to sleep. After 1 second, the display switched on. then it switched off after like 5 seconds then on again...
screen usage is 78%!!!!
i did a hard reset but the problem is still there
hafiz9000 said:
my s3mini keeps switching on resulting a very heavy battery drainage... when i pressed power button, it goes to sleep. After 1 second, the display switched on. then it switched off after like 5 seconds then on again...
screen usage is 78%!!!!
i did a hard reset but the problem is still there
Click to expand...
Click to collapse
Try using an monitor app like Wakelock Detector to figure out whats causing the wakelocks.
A possible solution
Hi, I've got the same problem with my S3 Mini. I read in some sites that the problem could be a broken pin in the micro USB dock.
I already installed CM 11 but it has been useless. The device "feels" the cable going in and out, and for this reason it turns on and off every 5 seconds: that's because of the broken pin.
The best solution would be if someone could edit a kernel in order to stop this command, to let the device switched off even when the usb cable goes in.
Is there someone that can do this alteration? He could let people save a lot of money.

Odd frozen issue

So I took my charger with me to class today because my phone was almost dead. As it was charging I began to fiddle with it ex: go on reddit . Suddenly The phone began to lag and the screen shut off. I unplugged it and began to hold down the power button.... Had it held down for about a minute and still no results. The charging light is stuck green even when off the charger and the navigation buttons are stuck on. When holding down the power button the navigation buttons would also flash as it normally does but im not getting any feedback from the device. Anyone have any solutions? I need my phone to be working asap. If there isnt any hope i may as well upgrade.
Little update: I let the battery die out and plugged it into the charger. After half hour it still wouldn't turn on. Several hours after that I found it on and running. Very strange....

Categories

Resources