restarted my phone at work today and all it does now is go straight to the tri colour boot loader screen. Iv take sím out, SD card out, battry out, nothing works.
Put the USB cable in and it starts on its own straight to the tri colour screen without pushing start button
Any ideas..
Thanks Ahead
Maybe it´s as easy as that the camera-button is stuck? That happened to me with the power button. Now the power button is a bit "loose" in feel but is not active all the time.
yeap
I thought of that, iv pushed the camera button quiet a few times trying to see if its stuck but it didnt help at all, still doing it. If i connect the USB cable with no battery in it starts up on its own as well and goes straight to the boot loader screen.
Its says
WING220 MFG
SPL-0.91.hard
CPLD-7
USB
update
A quick update, if i actually put the USB headphones in the phone and try to start it it works. A restart with them in works to. Take them out and its straight to bootloader again. LOL Also Windows does not recognise the phone when its conected via USB cable when its running. This seems to be a USB problem of some kind. Iv done a hard reset as well, no luck.
Try this: enter bootloader and type "boot". If it again enters bootloader after restarting do the same thing again. Hopefully that fixes it.
hehe
No change. Only way to start the phone is with the headphones connected. When the phone is running and i conect it to the pc i get this " One of the USB devises attached to this computer has malfunctioned, and windows does not recognize it "
NoNco said:
No change. Only way to start the phone is with the headphones connected
Click to expand...
Click to collapse
Try "task 8" in bootloader and then "ResetDevice"
(ps do *not* experiment with other parameters!)
nope
When i used "boot" it made a buzz and went to a white screen, had to remove battry to restart, it didnt help, tried 3 times.
" task 8 " it goes dark for a split second and back to the bootlaoder screen. remove bat. restart back to bootlaoder screen
oh after i type task 8 i get an error that pops up in mtty
wceusbsh004 port read error occured
try Hard resting it but juss to let u kno IF U DO THIS U WILL LOSE a last memory u did even phonebook and all resets like new i had to do it cuz i had a prob i could not text n stuff now it works fine after HARD RESETING
doesnt work
Iv already done the hard reset from within WM when i get the phone to work, it didnt help.
Try the hard reset after re-inserting battery immediately at power on.
(keep left- and right softkey pressed and power on I think is the key combination)
mmm
trying to do it but i must be doing the key combination wrong. Just keeps going to tri colour.
I presume you meen the soft keys on the sides of the s730. Camera key and the Comm Key.
NoNco said:
trying to do it but i must be doing the key combination wrong. Just keeps going to tri colour.
I presume you meen the soft keys on the sides of the s730. Camera key and the Comm Key.
Click to expand...
Click to collapse
No, the softkeys are the two buttons next to the joystick, see here ->IMAGE<-
But I would think your mini-USB connector is kind of broken I'm not sure of course
nope
Iv tried the keys on the side, iv tried the keys on the keypad. i just dont get it to work...
mm
@ Jocky...
I eventually managed to do a hard reset, the problem was it just kept going to the bootscreen so i tried it with the headphones pluged in and then it worked, lol, but on the reboot it just went straight back to the tri colour screen again.. So no help there.
NoNco said:
@ Jocky...
I eventually managed to do a hard reset, the problem was it just kept going to the bootscreen so i tried it with the headphones pluged in and then it worked, lol, but on the reboot it just went straight back to the tri colour screen again.. So no help there.
Click to expand...
Click to collapse
Hmm, looks like a bootflag related to USB is set. The reason could indeed be a physical problem with the usb port of the device. Also it could be related to dirty contacts (both of the UB port and the battery).
I’m having the exact same problem with my S730. Only works with the headphones plugged. I can’t hear nor talk if unplugged the headphones. Does anyone knows how to fix this ???
Related
Hi. I tried to flash my kaiser to new Dutty's wm 6.1 rom (had Dutty's v3 before so i had hardSPL) and after the rom update process completed my kaiser died , screen is always black no matter i connect it to charger or push power, is there any possibility to bring my phone back 2 life?
Have you taken the battery out?
Have you tried flashing from SD card?
http://forum.xda-developers.com/showthread.php?t=336158&highlight=flash+from+card
Worked for mine when i bricked it.
i have taken battery out , it wont help. also flashing from sd card works only when u can actually power on the device and i cant do it. name of my rom wasnt RUU_signed.nbh it was : Ruu_Signed_Duttys_WM6.1_5.2.19716_1.64.08.21.nbh maybe thats the reason of error
Well did you try the special key sequence to try to turn it on?
special key sequence? U mean both softkeys and stylus into reset hole?
Can you get it to the HSPL screen?
hold camera button and stylus into reset hole?
If you can to there you can reflash it using the sc card method.
3. Plug the card into the phone, then enter boot loader mode by pressing down the Power and Camera buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears. (taken from Wiki)
Click to expand...
Click to collapse
not the soft keys
thanx but it wont work, if i could enter bootloader i would just reflash the rom, but i cant get my phone on, screen is all the time black. if i plug in a charger there is no charging led too.
Ok, so your saying you tried it and it doesn't work?
im saying this doesnt work because my phone is totally dead. i cant get any response, it just wont turn on.
ok I'm taking it that you didn't try that sequence because you won't say that you tried it.
Hell no he/she ain't tried it. Probably has no idea what you are telling him to do.
Well Belizibub told him, I just started reading between the lines and noticed that he never admitted to trying it.
I love your avatar Tater.
can't all read, he can't turn it on, so how is he suppose to enter the bootloader or flash it from the sd card.
how come i try to enter bootloader , the phone is D E A D, it doesnt respond on any key cominations. i cant see even blank screen, nothing, it just wont turn on.
take the battery out and plug it into the charger, if a red light comes on thats a good thing if not then you probably have whats known as a "bricked kaiser" and sent it in for repairs or go buy a new one and save that one for parts.
marcini said:
can't all read, he can't turn it on, so how is he suppose to enter the bootloader or flash it from the sd card.
Click to expand...
Click to collapse
LOL, not even worth it.
So let me ask this, Why was this thread started? Was someone seeking help? Has someone provided the possibility of help? Do you think that the devils friend didn't understand that to this requester of help, that his phone appeared to be dead? Or is it possible the Devils right hand man knows something that the requester of help doesn't know and kindly attempted to share it with him, just to have the secret unlock code ignored.
Try up up down down left right left right a b select start.
That will fix your phone.
ps, what I'm getting at is if you haven't tried it then you need to try it. The special key config could possibly turn the phone on for you.
OK, now I see this same conversation going on in 2 different forums by the same person. Here and in Dutty's latest 6.1 release.
I noticed you are an Orange user. I have seen Multiple Orange users trying to flash radios to their phone and locking them up. I suggest looking/searching for one of those threads and see if they have a solution.
Hi People
I think I have really bricked my Diamond for sure. I have read all the threads related to this problem and have tried all the possible fixes but to no avail.
Here is the problem: It is stuck on the first screen after tri colour screen showing the RGD info in red ink at the bottom right cornor. Pc wont recognize it and Active Sync 4.5 on xp is grey, not green.
I have done a few Hard resets and Soft resets. I have Olinex Hard Spl installed. Had Dutty's 1.6 working perfectly when decided to cook my own with Surface Kitchen. My first cooked rom worked fine and then I cooked another one with same base Stock rom , adding som programs and bam, this thing happened.
Please Help Help and yes I had flashed the same Diamond with every available cooked rom with no problem.
Thanks in advance. Lets not Die this beautiful Jewel.
Anyone please?
tararura said:
Anyone please?
Click to expand...
Click to collapse
Can you get it into bootloader mode??? If so, you should be fine to re-flash at that point.
I can get it to tri colour screen but it wont sync with pc ...?
tararura said:
I can get it to tri colour screen but it wont sync with pc ...?
Click to expand...
Click to collapse
So after getting to the tri-color screen and then plugging in the USB cable, you do not get "USB" at the bottom of the screen?????
Thanks for the quick reply..
Ok here is what I am doing. I perform the hard reset. Get the tri colour screen for couple of seconds and then it comes to the screen where it asks to press Volup to restore. I did it with the usb connected and usb disconnected but it wont sync. Active sync icon at the bottom on pc stays grey not green.
Pressing Volup on diamond restores, reboots and brings it back to 1st splash screen with RGD info at the bottom in red ink. aaaaah
When you are in bootscreen, connect via usb.
In the bottom off your screen you should see "usb"!
If this is what you see then flash one of the stock roms again.
After you've done this, your Diamond restarts and everything should be OK again!
Good luck!
Ok, do this:
1. Unplug the USB cable from the phone.
2. Hold down the Volume-down key and the Power button, then press (and let go of) the RESET button with your stylus.
3. When the tri-color screen appears, you can let go of the buttons.
4. The screen should say "Serial" at the bottom (in the gray color area).
5. Plug in the USB cable (The screen should change to "USB").
6. Run the RUU app to re-flash the phone.
That should get you back up and running.
To enter bootloader, turn phone off then press volume down and reset simultaneously and then power ono. If you have done this correctly it will remain there and the word "serial" appears at the bottom. Then plug in USB and the word changes to "USB" you can now flash ROM
When I flashed mine it also got stuck te first time because Windows found it necessary to install new USB driver when the Flash util wanted to connect to the HTC. The flash program jumped out leaving the diamond with the RGB screen...
But, after windows installed the new USB driver, I restarted the flash program and it finished just fine.
So if you cannot connect anymore I would try to find out if the USB driver has changed. Did you try connecting to another USB port?
Otherwise I would try to connect to another PC...
Hope it helps,
Beamer
fingers crossed
hope you unbricked it m8
@tararura
Be sure to come back and update the thread if you were successful. It may help others later if they search instead of starting another thread with a similar problem.
Holy smokes......
Its breathing again. Thank you TomInMB and Windoze9t8. Give yourselves a kiss for helping me out.
I used Windoze9t8's method and it came to the serial screen and then I flashed it with Dutty's.
So I was using hard reset method to get to bootloader screen, which was wrong.
So for everyone else, its Voldown and reset button at the same time for Bootloader screen.
Flashing is done and Active Sync recognized the Diamond.
Thanks again for everyone..... and I am sure that a few of us learnt the new trick from this thread.....
Glad to hear you're all set!!!! I sure would hate to have the feeling that my precious diamond was useless!!!!
Thats right , I already lost a lots of sleep trying to fix it last night..
I was following the guide for putting the button rom, and then the loki. all that went ok. The problem was I replaced the nbk file of the ipl/spl 3.08 file with the one from a radio download (radio 27111) and when it flashed now the phone doesn't recognize anything plugged into the usb port. Won't charge or nothing. no lights come on . I tried holding the camera and power button, and then pressiong the reset button, taking both hands off the buttons and then pressing power again and holding it to get in the bootloader multicolor screen, and it doesn't recognzie it either on my pc there. any suggestions?
it still loads the buttons flash rom and goes to the phone itself (old stock windows mobile) and pressing the start button takes like 15 secs to show the drop down start menu.
oh also it still says ipl 1.08 and spl 1.08 in the buttons splash pic....
although i was trying to put that 3.xx one
if anyone has:
tmobile RUU_Prodigy_1081002_108_10910_TMO_US.exe
please send me or give me a link. I tried googling but they all lead to the ftp server here (as we know has no files now on it). Someone said that worked for them. I tried another tmobile official one and it doesn't work. In boot loader (the multicolor screen) when i connect the usb the word usb shows, but the rom program on xp doesn't see it and I get an error 260 update error which says it can't connect to my phone.
Update: I tried the newest official tmobile software from their site and it does nothing. It does show the "usb" at the bottom in bootloader when I connect it, but the tmobile software (or anything) doesn't recognize it and gives a error 260.
When in windows (as it still goes) it shows the unknown battery thing and doesn't show how much battery life is there, along with being real slow. I didn't have a sim card in it ever while doing this but prob has no service either.
eh
50 views and im the only one with that problem ever? no one knows?
correction. it DOES charge.
same problem
hey, Ihave exactly the same problem, any luck finding a cure for this? would like to flash another rom but can't sync, do you know how to flash from SD card maybe that'll help us?
petesavva said:
hey, Ihave exactly the same problem, any luck finding a cure for this? would like to flash another rom but can't sync, do you know how to flash from SD card maybe that'll help us?
Click to expand...
Click to collapse
does your read sd cards?
no luck yet.
Hello,
Let`s start... maybe this will help you too guys... But first of all i want to know if your phone`s go in bootloader mode... ( just reset with the stylus and then hold just the camera button) and then it goes in the 3 color screen...
Let me know if you`ve got your phone`s in bootloader mode.... Replay as soon as posible... and... did you`ve tried another USB cable?
If you want to charge the phone, get the battery out, put it back, put the charger in, then hold the power button until it starts chargeing... 10-15 seconds max.
And if you get the phone in bootloader mode do this: http://forum.xda-developers.com/showpost.php?p=4104858&postcount=3
Regards.
eXPLOiTeD said:
Let`s start... maybe this will help you too guys... But first of all i want to know if your phone`s go in bootloader mode... ( just reset with the stylus and then hold just the camera button) and then it goes in the 3 color screen...
Let me know if you`ve got your phone`s in bootloader mode.... Replay as soon as posible... and... did you`ve tried another USB cable?
If you want to charge the phone, get the battery out, put it back, put the charger in, then hold the power button until it starts chargeing... 10-15 seconds max.
And if you get the phone in bootloader mode do this: http://forum.xda-developers.com/showpost.php?p=4104858&postcount=3
Regards.
Click to expand...
Click to collapse
it is in boot loader.. shows ipl 1.01 and spl 1.08 in the red section, and when i connect usb cable (good one) usb shows on the white at the bottom. in device manager i dont have the windows cd usb devices. in fact the pc doesnt even beep.
hnmm
bump......
1.) I changed new rom
2.)It freezes when i was using youtube panel
3.)I turned off and when i turn on again wont load
4.) I tried hard reset , taking out the battery and memory card still wont load
5.) couldn't connect to pc
anyone know how to fix ?
well i had the same issue few moments ago. but now i get rid of it by using a very easy method.
- While the phone is off -hold down the front left and right buttons on the X1 and insert your stylus into the soft reset hole all at the same time.
- After i did this i was presented with a blue screen that told me to press R to reset and delete all my existing stuff. Then i had to callibrate the stylus and the same stuff the day you got it.
I tried that way too, after it said restart i pressed spacebar to restart and its still stuck at loading screen...
you press R... not space
poetryrocksalot said:
you press R... not space
Click to expand...
Click to collapse
R to hard reset, SPACE to restart.
If the phone has finished its hard reset (it's telling you to press SPACE) and you can't just remove the battery and turn the phone on. Maybe your keyboard is dirty and it's not reading the SPA.CEBAR presses
OT: hey poetry, where'd you been? did you sell your X1?
Sorry for my bad english , but it did restarted after pressing the spacebar but it still freezes for some reason and ive done like 5`6 hard reseting it ;/
harveydent said:
R to hard reset, SPACE to restart.
If the phone has finished its hard reset (it's telling you to press SPACE) and you can't just remove the battery and turn the phone on. Maybe your keyboard is dirty and it's not reading the SPA.CEBAR presses
OT: hey poetry, where'd you been? did you sell your X1?
Click to expand...
Click to collapse
yes I sold my X1. I wanted to try out the Nokia E90, and my X1 was in such a bad shape that I had to sell it before it lost value.
i know this is old post, but i have that problem now, any solution.
i changed my rom 20x till now but now stack on XPERIA logo, soft reset hard reset not working, any help....
solved. entered boot loader, three color screen, run task 29 utility 8-12 times, every time connected disconnected usb cable, removed inserted battery and then suddenly update progres was shown on phone. huh. flashing my X1 was easy till today. Good luck to all...
i tried to upgrade the rom from WM6.1 to dynamics 2.0
i did everything and update successfully.
x1 reboot and went into start up screen saying hard reset on first run,
i tried to hard reset but my "R" dont seems to be working..
so i pressed "space bar" to restart.
after that it cant start up, i tried to hard reset, soft reset, take out battery, nothing seem to work, only a pulse of vibratiion... the screeen remains totally blank.
is my x1 dead?
thanks for the help
B3nGz said:
i tried to upgrade the rom from WM6.1 to dynamics 2.0
i did everything and update successfully.
x1 reboot and went into start up screen saying hard reset on first run,
i tried to hard reset but my "R" dont seems to be working..
so i pressed "space bar" to restart.
after that it cant start up, i tried to hard reset, soft reset, take out battery, nothing seem to work, only a pulse of vibratiion... the screeen remains totally blank.
is my x1 dead?
thanks for the help
Click to expand...
Click to collapse
try to flash that rom again
try to hold two silver keys and push the power button till you see tricoloured screen or try pushing two silver keys and soft reset button with stylus which is located in a tiny hole just stylus sized on the back right side of the phone
i tried 2 silver buttone with the power button and the back hole.
but my screen still remain blanked.
totally nothing.. only a pulse of vibration.
is it possible to be in this stage? will a totally bricked x1 still able to get tri color?
i think u should charge your battery. and then put a kovsimg.nbh file on sd card.
after that install the rom by pressing the volume button down and power button.
px1ilanmy said:
i think u should charge your battery. and then put a kovsimg.nbh file on sd card.
after that install the rom by pressing the volume button down and power button.
Click to expand...
Click to collapse
hi,
i have tried charging the phone,
i tried pressing 2 silver buttons and power button
i tried pressing 2 silver button and stylus poke reset hole for 5 sec
i tried power button with volume down..
nothing works.. its just give a pulse of vibration and a black lighted up screen, nothing else.
anyone please help. =(
you know those leds on the sides of the phone try charging the phone and see if they glow if they do then your screen may be broken or your flex cable has worn off i'll put my money on the flex cable if so then you should order a new one and replace it or take it to a service centre
Info about the way you've got to the trouble looks little... not clear.
i tried to hard reset but my "R" dont seems to be working..
so i pressed "space bar" to restart.
Click to expand...
Click to collapse
How did you press space bar if "R" doesn't work?
Then... If you can get into bootloader mode, you can reflash any rom you like... you have hard-spl installed, have you?
You can use few different combinations to get into bootloader -"power"+"vol-down" OR "power"+"cam button". As you have vibration on the start, I assume your bootloader isn't broken, so you should be able to do these operations.
Charging should work as well, even if you don't see any sign of charging.
bruno_123 said:
you know those leds on the sides of the phone try charging the phone and see if they glow if they do then your screen may be broken or your flex cable has worn off i'll put my money on the flex cable if so then you should order a new one and replace it or take it to a service centre
Click to expand...
Click to collapse
Yeah i can charge,
Led at the side does glow, when i call it will blink and vibrate, but i cant pick up, no buttons is working on the front screen, dont know about th qwerty..
i guess flex is crappy.. but if flex is crappy, the screen will light up but remain blank? the led will glow?
ultrashot said:
Info about the way you've got to the trouble looks little... not clear.
How did you press space bar if "R" doesn't work?
Then... If you can get into bootloader mode, you can reflash any rom you like... you have hard-spl installed, have you?
You can use few different combinations to get into bootloader -"power"+"vol-down" OR "power"+"cam button". As you have vibration on the start, I assume your bootloader isn't broken, so you should be able to do these operations.
Charging should work as well, even if you don't see any sign of charging.
Click to expand...
Click to collapse
thanks for the advise. i will try again! and report in again..
thanks alot bro!
B3nGz said:
i guess flex is crappy.. but if flex is crappy, the screen will light up but remain blank? the led will glow?
Click to expand...
Click to collapse
if you don't see SE logo on the start and backlight is turned on, if you don't see bootloader tricolor... looks really like it is flex (double check - I am not so advanced in hardware repairing).
Yes, leds should glow in that case.
ultrashot said:
Info about the way you've got to the trouble looks little... not clear.
How did you press space bar if "R" doesn't work?
Then... If you can get into bootloader mode, you can reflash any rom you like... you have hard-spl installed, have you?
You can use few different combinations to get into bootloader -"power"+"vol-down" OR "power"+"cam button". As you have vibration on the start, I assume your bootloader isn't broken, so you should be able to do these operations.
Charging should work as well, even if you don't see any sign of charging.
Click to expand...
Click to collapse
Hi the x1 is able to start up already.
surprisingly, for its blank screen, im able to connect and sync on windows centre and load up hardspl.
after that i follow ur instruction on power+camera, it started showing tricolor and rom flash.
thanks for all the help guys.
THANKS!
my bad , sorry for wrong info