I need help with youtube/TCPMP 0.72RC1 with flashflv and also youtube player. I also tried the WM6.1 TCPMP install from here http://forum.xda-developers.com/showthread.php?t=367070
Both duttys newst ROM and L26 ROM are giving me troubles with youtube.
Whenever I load a video, it will show the first frame, and then nothing else. It wont play. I have a tilt. With older ROMs it worked just fine. I could be wrong, but it seems that since the ROMs started using wm6.1 I've got this error.
I know other people have it running fine. I know other people are having the same problem as I am.
I install a ROM.
Install tomtom. works great.
Updated my contacts with Active Sync.
Went to ytpocket.com and pulled up a video and it loaded WMP and didnt work.
So I downloaded TCPMP 0.72RC1 and TCPMP FLV Plugin from ytpocket.com
changed file associations to include flash and mms
changed these settings
-Normal buffer size: 1148KB
-Preload at underrun: 5%
-Preload for audio: 64KB
changed it to run at start and in full screen.
Rebooted.
Still freezes on first frame. Program still responds. just movie doesnt play.
Tried different clips.
i'm stuck
bump
anyone?
mhm i have dutty 6.1 hybrid and it work fine havent ran in to any issue with youtube i dono why your having the problem do you hear the sound tho atleast ???
Using dutty's latest rom here, and I'm having no problems at all with this app here
It doesn't have the ability to search or play the other video sites, but as far as youtube goes, this app is superior.
Today I just got Youtube working for the first time in my life with the TyTN2
With L26's Diamond V3, connected with WiFi (I don't use GPRS/3GP)
Not with TCPMP, just clicking a link in PIE, opens the video with Streaming Media player..
Only thing I changed was options > connect via: The internet in Streaming Media
I finally got it working with some hard work on my part on L26 v4 ROM. Posted the solution in th l26 v4 rom thread.
lots of ppl are having this issue. glad i could fix it.
try youtubeplay i use that now to watch youtube vids instead of TCPMP
I have flashed every rom that dutty made. And all of them supported Youtube. I watch a lot.
xmoo said:
I have flashed every rom that dutty made. And all of them supported Youtube. I watch a lot.
Click to expand...
Click to collapse
his last one with the diamond drivers in it was giving everyone trouble.
bapssystupr3m3 said:
try youtubeplay i use that now to watch youtube vids instead of TCPMP
Click to expand...
Click to collapse
yeah, and thanks. I did try that though as stated in my first post.
hey there..
I have downloaded TCPMP and installed it, but it gives me some error.. others that has experienced that? its only on my diamond ..
same problem here, i tried last official release and the release 0.72 or so
extracted from another htc device, dunno from whitch.
you should use coreplayer or the divx mobile player (this one does not have that much preferences )
you try it.
http://forum.xda-developers.com/showpost.php?p=2061081&postcount=1
There's a bug with the older TCPMP and coreplayer versions.
Coreplayer 1.2.5 and onwards works great on the HTC Diamond though!
there is a special compiled version v072 on the forum somewhere.
it works perfectly with the diamond
found it, installed it, tested it, works fine!:
http://forum.xda-developers.com/showpost.php?p=2061081&postcount=1
laporte said:
found it, installed it, tested it, works fine!:
http://forum.xda-developers.com/showpost.php?p=2061081&postcount=1
Click to expand...
Click to collapse
did you have any blacked out buttons on your screen when opening tcpmp,like the play button and the one next to it?
I tried flashvideo bundle out aswell but couldnt get IE as default browser so I gave up.
The the divx playback in tcpmp is pretty impressive so i will keep it on there anyway.
ejp, black icons for me, too. a flaw i can live with
Ok, after trying multiple different versions that supposedly were supposed to work in 6.1 and they did not, I finally found a version of TCPMP that works on my 6,1 tilt here:
http://forum.xda-developers.com/showthread.php?t=380387
However, while TCPMP now works, I am still having problems with these additional plugins:
http://picard.exceed.hu/tcpmp/test/
FFMPEG plugin - with this installed TCPMP crashes yet again, all other plugins appear to install fine
Also, the FlashVideoBundle no longer seems to work, it dosen't crash TCPMP but it just dosen't work in IE anymore, clicking a video just opens the page (which of course dosen't play the video) instead of bringing up a download/play/loadpage popup. I assume this is probably more related either to code changes at www.youtube.com or the newly updated version of PocketIE in WM 6.1 rather than WM 6.1 itself, but I am no developer so I can't say for sure.
Are there any solutions to this?
Yes, I've searched and searched, this forum and others and can't seem to get this to work. I've installed the Flash Bundle and TCPMP, in the same place and neither IE or Opera 9 will stream even youtube mobile videos. What am I doing wrong?
BTW, stock ATT tilt WM 6.1
Thanks
Google youtube play
its an awesome program that allows you to play videos as well as save them and convert them into audio files which is pretty sweet for ringtones
haha
Oh and if you really want it browser style try skyfires new browser
opera mobile 9.5 is still in beta and does not currently support video
Or flash the latest official HTC WM6.1 ROM. It is the STREAMING MEDIA PLAYER integrated and works without additional configuration even through Pocket IE.
download skyfire browser and you should be able to view youtube videos with no probs or any video
Junner2003 said:
Or flash the latest official HTC WM6.1 ROM. It is the STREAMING MEDIA PLAYER integrated and works without additional configuration even through Pocket IE.
Click to expand...
Click to collapse
I flashed the latest official HTC WM6.1 ROM as soon as it was released from AT&T a couple months ago, and still nothing (not PIE not Opera, not Iris) will stream video for me except Skyfire.
Just a quick question... did you do a soft reset?
If so and it still doesn't work then unistall your tcpmp and flashbundle.
I was having the same problems until I installed this combination of cabs.
1 TCPMP-0.72RC1-ARM-PPC-recomp-03.CAB
2
Obviously, install to the same location, soft reset and let the videos begin. To see applicable websites go to start\programs\video sites.html
Hope this works for you.
a solution if you're willing to pay a bit
I used TCPMP with the flash bundle with no problem for WM 6.0, but started having trouble with the 6.1 version as well. My solution... go with the upgraded version of TCPMP (CorePlayer). Yes, you have to pay for it, but it can allow for direct search/play of Youtube videos. It's also a pretty fanfreakintastic media player. It's going to cost you about 30 clams, but for me, it's well worth it. I've been playing videos and music with it nonstop since WM 6.1 came out without any problems. No crashing, no excessive pauses, nada.
Hi all,
I believe this issue is ROM related that is why I am starting the thread here.
Issue:
CorePlayer starts lagging, dropping frames and is getting the audio out of sync on all Windows Mobile 6.5 ROMs which I have tried, including NRGZ28's 6.5 and 6.5.1 ROMS as we all now his ROMs are one of the best.
Currently I am running stock Windows Mobile 6.5 5.2.21854 (Build 21854.5.0.80) same issue - however if I turn off the TouchFlo 3d (Manila 2.1) all works fine.
Tried using cleanRAM - no good.
Any advice or help on this will be highly appreciated and I believe not only for me
Regards to all.
thug_life_inc said:
Hi all,
I believe this issue is ROM related that is why I am starting the thread here.
Issue:
CorePlayer starts lagging, dropping frames and is getting the audio out of sync on all Windows Mobile 6.5 ROMs which I have tried, including NRGZ28's 6.5 and 6.5.1 ROMS as we all now his ROMs are one of the best.
Currently I am running stock Windows Mobile 6.5 5.2.21854 (Build 21854.5.0.80) same issue - however if I turn off the TouchFlo 3d (Manila 2.1) all works fine.
Tried using cleanRAM - no good.
Any advice or help on this will be highly appreciated and I believe not only for me
Regards to all.
Click to expand...
Click to collapse
I never wanted to run a cooked rom before the official 6.5 upgrade came because on WM6.1 my Rhodium played normal 700MB Divx files quite good, while a friend that had been running every unofficial 6.5 rom had very poor playback/ image tearing, and the images looked very rasterized when filling the whole screen even though the same video on my phone running official HTC 6.1 rom looked very good.
He tried installing all of the drivers available like ati, neo driver pack, exc, but nothing worked. I figured that it was probably due to the cooked roms.
So after the official 6.5 upgrade came out I switched and ever since my video playback is bad, the images tear, and look really rasterized.
I now think that the poor video playback is either:
A.) some software/ drivers that were in the official 6.1 rom but are not in the 6.5 rom
or
B.) something in coreplayer is not working with windows phone 6.5 causing it to run very badly on 6.5.
look in the Rhodium Software section, not rom section. there are tips for coreplayer playback
I traced the problem back to Touchflo3d after trying different things. When I turn off touchflo3d it works without lagging etc. It's a work around I always use whan I want to playback a movie in Coreplayer.
I new there would be others having the same issues. it is not the core player - I tried all suggestions, switchin qtv to gdi, larger buffer size - no good. it must be the 6.5 and what drivers it comes with. that is why I am writing here as the cooks now what they put in their drivers and might now what can fix this. what I assume is the ne manila 2.1 eating too much resources, because when switched off - core player works like e charm.
It is a workaround but everybody knows its a pain in the a** to turn off touchflo3d to play a movie and then switch it back on after that.
So, dear Cooks, enlight us with your knowledge, please
Regards to all
this only thing made me hate myself for trusting htc again (1st, p3300 with poor hardware for full price)
I have the same problem and Im on the 6.5 roms. Coreplayer does not play anything smooth at all. I was forced to encode my music videos and watch them in WMP but is there a solution to coreplayer yet?
I tried playing around with all the settings (GDI , DirectDraw, QTV,) tried everything on the 6.5 roms and its a no go.
I even tried to flash back to a 6.1 rom but phone hung on boot screen so I had to force bootloader and go back to 6.5 rom. hmmm...
By observation,
when you occupy memory higher than 50%, Core player tends to Lag and look funny, that's why when you disable touchflo3D (takes about 7-8% on memory), video's can play normal and look normal. When I had the default stock rom , i managed to disable many things thru the registry and brought the 44% down to 26% which allowed me to leave touchflo3D on and use core player with any issues. but now that im in wm6.5 currently having issues trying to disable stuff to bring down memory.
Long story short - Maintain your memory about 46% or less and core player will play and look perfectly.
Extreme184X said:
By observation,
when you occupy memory higher than 50%, Core player tends to Lag and look funny, that's why when you disable touchflo3D (takes about 7-8% on memory), video's can play normal and look normal. When I had the default stock rom , i managed to disable many things thru the registry and brought the 44% down to 26% which allowed me to leave touchflo3D on and use core player with any issues. but now that im in wm6.5 currently having issues trying to disable stuff to bring down memory.
Long story short - Maintain your memory about 46% or less and core player will play and look perfectly.
Click to expand...
Click to collapse
Im still not sure what the problem is. I managed to go back to TMobile stock rom and disabled touchflow 3d on wm6.1 still cant get any video to play smooth.
The videos im testing are mp4 with 800kbit bitrate at native resoulution also at 25fps and still choppy.
You know this should go into the General section but as to an answer I read that Coreplayer does have a driver issue with WM6.5 and they have to update their software. But to get good playing videos why not just use the WM6.5 stock video player. You can use it by selecting a video through albums. It plays everything just fine. I have a Blu-Ray rip Transformers 2 movie that is 1.48gb and it plays perfectly
chrisrj28 said:
You know this should go into the General section but as to an answer I read that Coreplayer does have a driver issue with WM6.5 and they have to update their software. But to get good playing videos why not just use the WM6.5 stock video player. You can use it by selecting a video through albums. It plays everything just fine. I have a Blu-Ray rip Transformers 2 movie that is 1.48gb and it plays perfectly
Click to expand...
Click to collapse
Do you happen to know the video bitrate of the blu-ray rip? Im curious of the highest video bitrate possible on the touchpro2 with smooth playback.
Extreme184X said:
By observation,
when you occupy memory higher than 50%, Core player tends to Lag and look funny, that's why when you disable touchflo3D (takes about 7-8% on memory), video's can play normal and look normal. When I had the default stock rom , i managed to disable many things thru the registry and brought the 44% down to 26% which allowed me to leave touchflo3D on and use core player with any issues. but now that im in wm6.5 currently having issues trying to disable stuff to bring down memory.
Long story short - Maintain your memory about 46% or less and core player will play and look perfectly.
Click to expand...
Click to collapse
It is a video driver issue in this case. Same amount of memory with or without TF3D - lag occurs with TF3D and no lag without. It is only confined to the TP2 and WM6.5 because the Pure doesn't experience any lag with TF3D.
I noticed it with the ATT stock rom and the newer Manilla 2.5 based roms. It must be some conflict with the video drivers. Manilla is winning the conflict.
i have core player and i never experienced a lag even with tf3d on
lilchip85 said:
i have core player and i never experienced a lag even with tf3d on
Click to expand...
Click to collapse
Which version of core player you use? and which rom you on?
chrisrj28 said:
You know this should go into the General section but as to an answer I read that Coreplayer does have a driver issue with WM6.5 and they have to update their software. But to get good playing videos why not just use the WM6.5 stock video player. You can use it by selecting a video through albums. It plays everything just fine. I have a Blu-Ray rip Transformers 2 movie that is 1.48gb and it plays perfectly
Click to expand...
Click to collapse
i play everything with the default album. it allows hardware acceleration and handles mp4 and h.264 perfectly. someone in the blackstone forum even made a wvga converter that works perfectly.
hypersonicx said:
Which version of core player you use? and which rom you on?
Click to expand...
Click to collapse
And more importantly what video setting do you have and what sort of videos are you playing? The issue involves QTv and I am sure anything higher than 320x240 with decent bit rates. As I mentioned before QTv appears to be the issue.
I remember reading some stuff from Betaboy (I think that is his name) on the video driver issues with the Qualcomm devices and TF3D is the only program to take full advantage of the video chip. At some point something broke with the TP2, WM6.5 and TF3D.
hypersonicx said:
Which version of core player you use? and which rom you on?
Click to expand...
Click to collapse
Touch X "SENSE 2.0B" is the rom i was running. my core player says "v1.3.5 build 7340 for ARM"
dario69 said:
And more importantly what video setting do you have and what sort of videos are you playing? The issue involves QTv and I am sure anything higher than 320x240 with decent bit rates. As I mentioned before QTv appears to be the issue.
I remember reading some stuff from Betaboy (I think that is his name) on the video driver issues with the Qualcomm devices and TF3D is the only program to take full advantage of the video chip. At some point something broke with the TP2, WM6.5 and TF3D.
Click to expand...
Click to collapse
i thought i had a a bigger size but i didn't.
same problem
I am having the same problem with all ROMs
in 6.1, no problems playing, anything higher on ANY ROM and it starts to lag.
I personally can't use the built in player as I play divx and mp4 files, and windows media player does not seem to like those.
I have Core Player 1.3.2
phony said:
I am having the same problem with all ROMs
in 6.1, no problems playing, anything higher on ANY ROM and it starts to lag.
I personally can't use the built in player as I play divx and mp4 files, and windows media player does not seem to like those.
I have Core Player 1.3.2
Click to expand...
Click to collapse
I am running Core Player 1.3.6 - same problem, I was on 1.3.5 with ROMs 6.1 and it was happy, now ... I have to turn off TF3D.
And people, understand that we want to play DIVX and XVID files (AVIs) downloaded directly, I am sick converting files and thinking which will be the best resolution, bit rate, etc ....
I hope you understand.
The Dutch stock 6.1 rom has absolutely no problems with coreplayer. Stock 6.5 gives me sometimes smooth playback, sometimes not. I watch divx/xvid with SD resolutions.