Ghost Email Accts - Tilt, TyTN II, MDA Vario III General

I did a search, but didn't find anything, sorry if I missed the solution to my problem.
OK, so I have flashed to a WM6.1 rom, but this occurred when I flashed to the official rom as well. When I create a new email acct for my gmail, I have to name it something different each time I flash. I only keep my outlook email and a gmail acct. Right now if I go to email in spb mobile shell it shows 3 gmail accts, if I go to messaging, it shows 1. There is only 1 acct. Obviously something isn't getting erased when the new rom is flashed. Any idea how to get rid of these ghost accts? I got a similar issue with active sync, it would not sync until I gave the tilt a new name (other than what I had given it during previous set ups) even though I had deleted all partnerships.
This is my "Messaging" Screen, as you can see...there is only 1 extra email acct, besides "Outlook"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is my messaging screen as displayed by spb mobile shell
This is what I get when I try to set up a new acct and name it Gmail
It's got to be a registry entry, but I don't know where to find it. Any help is greatly appreciated, I would dearly love to get these ghost accts off my phone.

I have had this happen to me when I used IMAP4 accounts
There are no fixes AFAIK, other than a hard reset

Thanks for the reply. I figured out how to fix it.
I downloaded a small .exe file called mailaccountrepair and repaired the ghost accounts so they all showed up on the messaging screen then deleted them. Then I was able to set up an acct named "Gmail" and it works fine. None of the ghost accts show up in my acct listing in spb mobile shell anymore either.

good to know you got it fixed.. but I had another idea and thought I'd post. I just flashed to the new dutty rom and read the wiki first and noticed that they STRONGLY recommend hard resetting after flashing any new rom.
that means
1)flash the rom
2) wait for the "Tap here to begin" screen to come up
3) Hard reset your kaiser device by holding both softkeys and hitting the reset button with the stylus.
4) begin personal/business use.
did you do this first? And i mean as soon as you flashed.

btate0121 said:
good to know you got it fixed.. but I had another idea and thought I'd post. I just flashed to the new dutty rom and read the wiki first and noticed that they STRONGLY recommend hard resetting after flashing any new rom.
that means
1)flash the rom
2) wait for the "Tap here to begin" screen to come up
3) Hard reset your kaiser device by holding both softkeys and hitting the reset button with the stylus.
4) begin personal/business use.
did you do this first? And i mean as soon as you flashed.
Click to expand...
Click to collapse
Yep, I read the wiki, and while I didn't flash to dutty's rom (didn't know how to flash the radio), it said it is HIGHLY recommended no matter what rom your flashing to. So as soon as the tap the screen came up, I hard reset. And then ended up hard resetting again cause the sprite restore gave me unexpected results the first time.

Go to: HKLM\Software\Microsoft\Inbox\Svc\xxxxx (xxxx = the name of the account to be deleted) & delete the correct key.
First you will need a registry editor, I recommend Resco Registry editor but others will work fine.
Open up your registry editor and go to: HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Svc
Now in here you will find several registry keys. These include Activesync, imap4, pop3, MMS1 and SMS.
Go into the folders & look for one called "Friendly Name" with a value like "1Gmail" Then go to the parent key for the "1Gmail" folder again, & delete it.
Just soft-reset your device and the mailbox including will be gone.

Related

HTC - RANDOM ACCESS for Kaiser - Download Here

This was taken from the new Touch device series:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Addes a search Vertical line in the contacts application.
Download:
http://rapidshare.com/files/69445758/Random_Access.cab
p.s
Pictures are taken from the HTC Cruise review on Mobile-Review.
Credit for the cab file goes to Dr.Puttingham.
http://www.mobile-review.com/pda/review/htc-touch-cruise.shtml
Enjoy,
Nadavi
Nice!
You seem to be gettin all the cabs! Keep it up!
Alemaker
Thumbs up!!! this is what i've been waiting for.. i just asked this one..in the big cab collection thread *which is sticky*.
Keep them comming mate!
Do you also have this comm manager like the cruise has?
The TouchFlo cube?
and maybe the new HTC home/taskmanager plugin (with the bigger X buttons)?
This is a great Cab!! Unfortunately, this one also prevents Spb Backup from running, like your recent "large title bar" cab. Bummer! Hope there is some way to fix this.
working fine on Hermes WM5 and Touch WM6, good work!
automatically replaces old Contacts, for anyone who had to edit the registry previously
i was looking for it
thank you man
Bouloama said:
Thumbs up!!! this is what i've been waiting for.. i just asked this one..in the big cab collection thread *which is sticky*.
Keep them comming mate!
Do you also have this comm manager like the cruise has?
The TouchFlo cube?
and maybe the new HTC home/taskmanager plugin (with the bigger X buttons)?
Click to expand...
Click to collapse
The Comm Mgr cab is in the Stickied "Latest Cabs..." thread in this forum. Its called the 6 Button Comm Mgr cab...
Thanks for the tip, i watched over it!
UNINSTALL FAILS...
Head's up to all, when I tried to uninstall RandomAccess, it errors out stating it couldn't remove all aspects of the application and gives the user to option to just remove from the Add/Remove list. DO NOT JUST REMOVE, the program and registry changes are still there.
If you want to uninstall randomaccess, use a file explorer (such as Resco) to remove \windows\randomaccess.exe
Then use a registry editor (such as Resco), do a search for "Dr Putt" and remove all keys that reference this string. There are multiple hits that this search will find, so make sure to get them all.
Then run a second registry search for "randomaccess" (should only be 1 hit on that search). For this string you will find that the installation process actually changed the RAI for Contacts. So you will need to change the following back to default:
Change \HKLM\software\microsoft\shell\rai\:MSCONTACTS\0 to "Contacts" (no quotes)
Change \HKLM\software\microsoft\shell\rai\:MSCONTACTS\1 to ":MSPOUTLOOK Contacts"
Lastly, remove the key at \HKCU\software\microsoft\today\keys\113\open.
NOTE: If you had your right soft key set to any other program, you will have to modify the last step. Likewise, if you use a different application to view Contacts, this would also alter the above instructions.
DISCLAIMER: Working with the registry should be left to experienced users, you can serious mess up your device if you don't know what you are doing. This is informational only, I don't warrant anything if it goes bad for you.
smittyofdhs said:
UNINSTALL FAILS...
Head's up to all, when I tried to uninstall RandomAccess, it errors out stating it couldn't remove all aspects of the application and gives the user to option to just remove from the Add/Remove list. DO NOT JUST REMOVE, the program and registry changes are still there.
If you want to uninstall randomaccess, use a file explorer (such as Resco) to remove \windows\randomaccess.exe
Then use a registry editor (such as Resco), do a search for "Dr Putt" and remove all keys that reference this string. There are multiple hits that this search will find, so make sure to get them all.
Then run a second registry search for "randomaccess" (should only be 1 hit on that search). For this string you will find that the installation process actually changed the RAI for Contacts. So you will need to change the following back to default:
Change \HKLM\software\microsoft\shell\rai\:MSCONTACTS\0 to "Contacts" (no quotes)
Change \HKLM\software\microsoft\shell\rai\:MSCONTACTS\1 to ":MSPOUTLOOK Contacts"
Lastly, remove the key at \HKCU\software\microsoft\today\keys\113\open.
NOTE: If you had your right soft key set to any other program, you will have to modify the last step. Likewise, if you use a different application to view Contacts, this would also alter the above instructions.
DISCLAIMER: Working with the registry should be left to experienced users, you can serious mess up your device if you don't know what you are doing. This is informational only, I don't warrant anything if it goes bad for you.
Click to expand...
Click to collapse
Thank you for posting this! You saved me from hard resetting. Very appreciated.
Any chance to get this bar in Hebrew?
Hi Nadav,
Great idea, how about Hebrew fonts, will it work on PPC2003 SE?
is there any pre-requistes prior to install this random-access?
I tried and the contact still look the same. Pardon me.. I am newbie into such phone. Thanks
I tried this on my Prophet and it didn't worked. But the uninstalling was no problem and my contacts are working again
too bad it doesn't work on prophet
Does anybody know, how to get the "character selecting bar" at the right side to the left ?
Thanks in advance
Thanks
Working
Nadavi said:
Addes a search horizontal line in the contacts application.
Click to expand...
Click to collapse
WOuldn't that be a vertical line?
DarkDvr said:
WOuldn't that be a vertical line?
Click to expand...
Click to collapse
Yes.
Great catch, 1 cent from me .
Nadavi.
I was going to install this one, but I just found out. They are too many RA in the forum and I already had the same one as OP posted.
If you have installed the "HTC Random Access updated.zip" or "300_HTC_Random_Acces.zip". Those are same 66k in cab file.
Mine look just same as OP's, so I dont know if there is much in difference.
I hope this help with someone who has installed other version of RA.
In my cooke rom I already have HTC random access cooked in. Is there any benifit for my to install this over it?

Need the Kaiser Program for my tilt

Can anyone send me the file or show me where to go to download the kaiser program. Saw it today on a friends phone and want it but have no clue where and how to get it. Any help would be greatly appreciated.
what program....
what kaiser program? There are lots of kaiser programs. Narrow your description. Kaisertweak maybe??
Most likely HTC Home, does it look like this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yea that screen right there an the thing that has the cube also ur pics for people u call the most. sorry im new to this
franchise137 said:
Yea that screen right there an the thing that has the cube also ur pics for people u call the most. sorry im new to this
Click to expand...
Click to collapse
Sounds to me your best bet is to flash your Tilt with a Kaiser ROM or cooked custom ROM. It also sounds like you have a lot of reading to do so that you know what you are getting into.
Because if you dont, your kaiser will magically turn into a 400$
tyeo098 said:
Because if you dont, your kaiser will magically turn into a 400$
Click to expand...
Click to collapse
Couldn't said it better, ALOT of reading to do.
Lol, I'm pretty sure you could've found a better looking brick.
This better?
Dang.. I'd rather have a $400 Brick than this stupid no graphics havin laggy touch screen havin choppy video havin BRICK
franchise137 said:
Yea that screen right there an the thing that has the cube also ur pics for people u call the most. sorry im new to this
Click to expand...
Click to collapse
The cube and that home screen (in the picture) are two very different things. Aside from being separate programs, there's this:
The HTC Home Plugin (that picture) is a fully working program that you can pretty much install on any device without trouble. It is very useful and generally has no bugs.
The Cube, or TouchFLO, etc, is kind of working on various devices, but is often buggy, and even when fully working isn't that useful. I had it and got rid of it, because with as much as it does, most of that wasn't useful to me.
The Home Plugin can be found on this page:
http://forum.xda-developers.com/showthread.php?t=344544
I would also recommend HTC Album, among others. You will need to do a lot of reading to really get an idea of what is good and what doesn't, but for everything on that page, you should be safe enough just installing stuff and seeing what you like. Be aware that a lot of it isn't so useful (but is there for people who want it for whatever reason). If you don't know what one of those programs is, try searching for the name and seeing what comes up. If you install all those programs, you may very likely slow your device down to the point where you'd rather not have all of it. If you do that, a hard reset followed by re-installation of the good programs is best, as you may not be able to fully uninstall everything easily. Just so you know.
In the end, do lots of reading. Searching for those programs' names for more info is a great starting point, as i said.
-Taylor

hello, is there a program to run the wing thru the computer

hello, all, first post im glad to be part of xda,
i got a problem, my screen cracked cant see anything pretty much useless, it still receives calls and i can make calls by using the qwerty, is there a programs like motorola phone tools that lets you acces your phone with my comp, i use it for internet sharing and dang i internet less and broke to fix and or replace, please help.
t mo wing
hard spl
htc home/htc customizer.
pedro562 said:
hello, all, first post im glad to be part of xda,
i got a problem, my screen cracked cant see anything pretty much useless, it still receives calls and i can make calls by using the qwerty, is there a programs like motorola phone tools that lets you acces your phone with my comp, i use it for internet sharing and dang i internet less and broke to fix and or replace, please help.
t mo wing
hard spl
htc home/htc customizer.
Click to expand...
Click to collapse
www.mymobiler.com
Connect usb and make sure active sync is running...just install on ur desktop and will auto-run on ur mobile
Use this thread...
i had the exact same problem...
http://forum.xda-developers.com/showthread.php?t=354500&highlight=timace
thanks
i cant thank everyone here enough, i new there was somethign out there, xda ftw!!!!!!!!!!11
I find this extremely useful.
Wow, never knew this exsisted. Thanks!!!!!
Yeah, I had seen something similiar, but had never looked into it... I'm definitely trying it when I get home tonite.
mymobiler is very nice - i used it a lot before flashing several times a day....
@duprade - yeah i´m an adict...
papamopps said:
mymobiler is very nice - i used it a lot before flashing several times a day....
@duprade - yeah i´m an adict...
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just installed mymobiler under Vista and it is a newer version than i run once...
... free positioning window
.. or acting like a secound monitor...
when going with mosucourser out of right/left monitorside - the courser appears on ppc screen and you can use it there...
Now i need a gadet for sidebar out of it...
haha
papamopps said:
Just installed mymobiler under Vista and it is a newer version than i run once...
... free positioning window
.. or acting like a secound monitor...
when going with mosucourser out of right/left monitorside - the courser appears on ppc screen and you can use it there...
Now i need a gadet for sidebar out of it...
haha
Click to expand...
Click to collapse
newest version as well, but im running windows XP and i do not have the mouse cursor showing up on my phone... do u think that has to do with it being XP or what?
never mind, right click program in the task menu brought up a memnu i didn't know was there answer found...
never mind

Happy w/ my Throttle

I'm posting this just to say how much I enojoy using throttle over the default HTC homeplug, if you haven't made the switch you should consider doing so now! the touchflo works great, flash can be tricky but is beautiful, and it runs just as fast (sometimes faster) as my homeplug did! I know there aren't many themes for this yet but I don't see myself getting away from this clean black. Having multiple slides available for calendar/photos/apps and more makes life easier! Here are a some shots of my default yet clean and enjoyable set up. Please post your custom throttle pics if you have them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tried it. Didnt like the lack of an actual today screen for my plugins. I use IM+ regularly and not being able to see a new message displayed kinda sucked. The ONLY way i was able to even see the plugin was to disable the calender function and enable the plugin in its screen. Even then, it doesnt autoupdate to show a new message. Sigh
pyraxiate said:
Tried it. Didnt like the lack of an actual today screen for my plugins. I use IM+ regularly and not being able to see a new message displayed kinda sucked. The ONLY way i was able to even see the plugin was to disable the calender function and enable the plugin in its screen. Even then, it doesnt autoupdate to show a new message. Sigh
Click to expand...
Click to collapse
you can manually add plugins to any page within throttle and..for the home page you just add the line for the plugin in the xml...its very simple..i did it for voip byut yah the auto update does kinda suck..i just hit the hw start button..it updates the page/plugins
it's sloooow...
and still feels like an addon...
Ahhhh.....can i just download and install it over any ROM's i'm using now? Or has it got to be cooked in with the ROM?
Edit: Found the website. Ignore my question
Scann69 said:
Ahhhh.....can i just download and install it over any ROM's i'm using now? Or has it got to be cooked in with the ROM?
Edit: Found the website. Ignore my question
Click to expand...
Click to collapse
You can but L26's last B5 is SICK SICK SICK! I highly recommend it!
The TL is not that slow, you just need the good parameters (like using "paged" movements to naviguate through the different tabs / pages). Otherwise the other ways to naviguate are indeed slow (kinetik, wheel of fortune etc).
That's really a nice and useful plugin. Highly customizable and like it has been said, you can add Today Plugins in the TL, so you can virtually have lot's of them because you can have as many "tabs" has you want.
The TL in Laurentius26 TL B5 indeed highly rocks hehe.
slovoflud said:
it's sloooow...
and still feels like an addon...
Click to expand...
Click to collapse
I don't get it, this is faster than anything i've used before, maybe i've been using the wrong roms, but I doubt it. The only issue I have is the same with all my other roms, to use skyfire or opera!
the only way I found it to be useable using L26's beta 5 was to remove the calendar page (or add pocketbreeze and remove the default calendar) everything else worked pretty well.
How do I get this 'Throttle' thing, and is there any help or information reguarding installing and setting this up?
I've never flashed or cooked my ROM before, if it consists of that, and I would rather not. This seems really nice, and since I can not get the HHC program to cusomize my Home screen now, this may be something to try.
Any help?
mzshortay said:
How do I get this 'Throttle' thing, and is there any help or information reguarding installing and setting this up?
I've never flashed or cooked my ROM before, if it consists of that, and I would rather not. This seems really nice, and since I can not get the HHC program to cusomize my Home screen now, this may be something to try.
Any help?
Click to expand...
Click to collapse
Flashing is not hard, it just needs care.
Here is the main Wiki of the Kaiser.
To know how to flash a ROM, please read everything here. The first time you flash, it's taking time cause you are new to that game and you need to install first a soft called "hardSPL". Then you'll be able to flash (install) a ROM. If you flash this one (L26 v10 Beta6), you'll have the ThrottleLauncher pre-installed .
If you don't want to flash a ROM, you still have the posibility to install the ThrottleLaucher by yourself following this post.
bittermormon said:
the only way I found it to be useable using L26's beta 5 was to remove the calendar page (or add pocketbreeze and remove the default calendar) everything else worked pretty well.
Click to expand...
Click to collapse
I love calendar, mostly for the swiping to next or previous month, i've got alot of **** in my calendar and it helps to not have to 'leave' the home page to open calendar to see when i've got upcomming appointments.
mzshortay said:
How do I get this 'Throttle' thing, and is there any help or information reguarding installing and setting this up?
I've never flashed or cooked my ROM before, if it consists of that, and I would rather not. This seems really nice, and since I can not get the HHC program to cusomize my Home screen now, this may be something to try.
Any help?
Click to expand...
Click to collapse
As far as flashing a new rom I suggest you read the wiki on rom flashing how to's.
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
It's fool proof if you READ everything! And by using a stock rom that came with the phone you are missing out on alot of Kaiser's features that you paid good money for!
Hi. How do i get the home screen with that all black. as you have it nufsaid ?
my top line and background of the clock is in the standard today colours(blue)
Cheers
jmagicuk said:
Hi. How do i get the home screen with that all black. as you have it nufsaid ?
my top line and background of the clock is in the standard today colours(blue)
Cheers
Click to expand...
Click to collapse
Here you go buddy
http://forum.xda-developers.com/showthread.php?t=395617

Dial Phone from PC

Hi all,
I dial a lot of numbers from databases, and was wondering if there is an application that would dial the phone from the pc when they are connected ?
I have searched everywhere i know of and on google, perhaps im not putting in the the right words but cannot find anything yet.
Regards
Ore
OregonAird said:
Hi all,
I dial a lot of numbers from databases, and was wondering if there is an application that would dial the phone from the pc when they are connected ?
I have searched everywhere i know of and on google, perhaps im not putting in the the right words but cannot find anything yet.
Regards
Ore
Click to expand...
Click to collapse
Try this fella.. I found it to be very handy...
http://www.raspberrysoftware.com/trueconnect.htm
P.s Its not free...! Although you do get a demo to try before you buy...!
Hey thank you very much i will give it a go
fyew-jit-tiv said:
Try this fella.. I found it to be very handy...
http://www.raspberrysoftware.com/trueconnect.htm
P.s Its not free...! Although you do get a demo to try before you buy...!
Click to expand...
Click to collapse
Thats a really good piece of kit, its brilliant all my text messages will be automatically copied onto my device and that I can use my PC to access the menus ect.
But its not quiet what i was looking for. I would like to be able to click on a number in excel on my pc and have my mobile dial it?
OregonAird said:
Hi all,
I dial a lot of numbers from databases, and was wondering if there is an application that would dial the phone from the pc when they are connected ?
I have searched everywhere i know of and on google, perhaps im not putting in the the right words but cannot find anything yet.
Regards
Ore
Click to expand...
Click to collapse
A better piece of software is called Pocket Controller Pro, Version 6 supports the Diamond better than older versions - but it all still works ok. A Freeware one you can use is also called MyMobiler and is pretty good and easy to use.
I also want an application where you can dial directly from your computer.
Pimphony (Alcatel) has a nice feature where you copy the phone number (CTRL+C) and press CTRL+right mouse button to paste it directly into a small dial window.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then you just press the call button and, voila, you make a call.
Unfortunately this is only for PBX but it would be nice to have something similar for WM that works over cable or bluetooth.
try this one
http://www.mtux.com/
avery
avery0803 said:
try this one
http://www.mtux.com/
avery
Click to expand...
Click to collapse
I use it and it is great, but it only replicates de PDA dialer on PC screen, it does not allow to make a call directly from inside an excel contact's database...as far as I know
pasil.pt said:
I use it and it is great, but it only replicates de PDA dialer on PC screen, it does not allow to make a call directly from inside an excel contact's database...as far as I know
Click to expand...
Click to collapse
I was about to say the same thing...
I going to use the raspberry true connect one above as its superior I love the text message in out look thing.
Still no solution to dialing the phone from the PC...
Anyone have any ideas?

Categories

Resources