Database Develop

Phone Band Settings

Is there any way to configure the UMTS Band settings on the Trinity / D810? I ask as the ROM provides the following options:
Network Type:
Auto
GSM
WCDMA
GSM/UMTS Band:
Auto
GSM(900+1800)+UMTS(2100)
GSM(1900+850)+UMTS(1900+850)
UMTS(2100+800)
Now ... for the HSDPA Network in Australia for Telstra (Next G), I need the phone to work on the UMTS(850) Band. However, by selecting the option above where the only UMTS(850) is available means that the alternate 3G Band (not HSDPA) of UMTS(2100) is not available, and the GSM Bands in the same selection are not valid for the Australian market.
Couple of queries, and I hope there are ways of configuring the device to achieve this (without getting a new ROM to support it):
When a Band selection is made, what is the order which the device uses the connections? ... i.e. if the selection was GSM(1900+850)+UMTS(1900+850), will it look for UMTS or GSM first? If UMTS, which band - 1900 or 850?
When Auto is selected, I am guessing it uses each option in the list until it finds a valid network? This would mean that for Australia, if left on Auto, you would never select HSDPA for Telstra as it would find the 3G UMTS(2100) network first (non-HSDPA).
My assumptions are that if left on Auto, it looks based on list order (which is the network order in the registry). So, for Australia, I need a setting like the following:
GSM(900+1800)+UMTS(850+2100)
Is it possible to create this Band Selection without a new ROM?

AJB said:
Is there any way to configure the UMTS Band settings on the Trinity / D810? I ask as the ROM provides the following options:
Network Type:
Auto
GSM
WCDMA
GSM/UMTS Band:
Auto
GSM(900+1800)+UMTS(2100)
GSM(1900+850)+UMTS(1900+850)
UMTS(2100+800)
Now ... for the HSDPA Network in Australia for Telstra (Next G), I need the phone to work on the UMTS(850) Band. However, by selecting the option above where the only UMTS(850) is available means that the alternate 3G Band (not HSDPA) of UMTS(2100) is not available, and the GSM Bands in the same selection are not valid for the Australian market.
Couple of queries, and I hope there are ways of configuring the device to achieve this (without getting a new ROM to support it):
When a Band selection is made, what is the order which the device uses the connections? ... i.e. if the selection was GSM(1900+850)+UMTS(1900+850), will it look for UMTS or GSM first? If UMTS, which band - 1900 or 850?
When Auto is selected, I am guessing it uses each option in the list until it finds a valid network? This would mean that for Australia, if left on Auto, you would never select HSDPA for Telstra as it would find the 3G UMTS(2100) network first (non-HSDPA).
My assumptions are that if left on Auto, it looks based on list order (which is the network order in the registry). So, for Australia, I need a setting like the following:
GSM(900+1800)+UMTS(850+2100)
Is it possible to create this Band Selection without a new ROM?
Click to expand...
Click to collapse
The new Dopod ROM has the same band selections as yours does. I tried changing the selections to manual with bad results. I just leave it on auto now.

Matterhorn said:
The new Dopod ROM has the same band selections as yours does. I tried changing the selections to manual with bad results. I just leave it on auto now.
Click to expand...
Click to collapse
I could do that to, but it would mean I don't get HSDPA. I have verified this. The only way to get HSDPA is to set the Band selection to the one with UMTS(850) in it ... this is not ideal, and that's why I posed the question to this forum.

No one??
I am guessing that no one has ever come across this, or needed to do it?

Registry Patch
This Registry patch works for the Hermes. It might work on the Trinity.
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PhoneSetting\BandType]
"ItemCount"=dword:00000006
"ItemName1"="Auto"
"ItemName2"="GSM(900+1800)+UMTS(2100)"
"ItemName3"="GSM(1900+850)+UMTS(1900+850)"
"ItemName4"="UMTS(2100+800)"
"ItemName5"="GSM(900+1800)+UMTS(2100+850)"
"ItemName6"="GSM(900+1800)+UMTS(850)"
"ItemValue1"=dword:00000000
"ItemValue2"=dword:00000001
"ItemValue3"=dword:00000002
"ItemValue4"=dword:00000003
"ItemValue5"=dword:00000004
"ItemValue6"=dword:00000005
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\UMTS\BandSelection]
"Band"=dword:00000005
You really just need to add ItemName5 and 6, and ItemValue5 and 6, and change the ItemCount from 4 to 6 (as you added two options) using your favorite Registry Editor.
Do a soft reboot of the phone. Now you can select the NextG option GSM(900+1800)+UMTS(850)

3G connection
I drive around the Perth Metro area a lot for work and am finding that if left on Auto the connection is lost quite often mid call. How have you found the 810's management of the bands? And the auto fallback? Is there a way to set the fallback threshold so it drops back if under 2 bar signal strength? At the moment it sits on 1 bar strength and drops out mid call.

3G in the USA

Has any been able to get 3G to work in the USA yet?
thank you,
jdm

I would say that it is imminent that the US version of the S730 will be released soon. AT&T or T-Mobile may pick it up (T-Mobile's 3G network in NYC just went live, but there are no phones). If so, I would suspect that some of these crafty folks (like Alcaline) would be able to extract the radio ROM, and make it available for the S730 that we all have (the european version).
But, here's the most important part... It all depends on whether or not the European version of the S730 has the radio chipsets that will support 3G on the frequencies that are 3G in the US. There is no known answer "available" to this, so it can only be discovered by testing.

The current S730 uses the 2100 band for 3G speeds and ATT is deploying 3g on 1900 and 850 I believe and they sell a decent ammount of 3g phones. T-Mobile is working on setting one up on the 1700/2100 band but I dont care for T-Mobile.
I have watched my phone at times flip into 3G mode for a few minutes then revert back to Edge, its trying but cant work properly without the right frequencies.

Check out the chipset datasheet. Bottom of page three explains the specific radio chipset combos and their support for different freqs.
I suppose, to save on manufacturing costs, they could have used the single chipset that supports 3G on all freqs (RTR 6285), but I believe this is unlikely due to the difference in model number that was submitted to the FCC (European version: WING220, US version: WING200).
Who knows though.

3G in US
Hermes models had different model #'s HERM100, HERM200 and had the same radios, in some cases minor difference such as case style, i.e removal of video calling camera etc. With any luck we have the RFR6500 + RTR6275 Combo, or as you mentioned the RTR6285 and just not a radio rom that allows 1900+850 3G. I was looking on the FCC site and they have some interesting screen shots, one of which shows one(s730) with what appears to be the front camera covered up and another which shows a radio rom(R 0.27.03.05B), one that, to do the tests would likely need to support 1900+850. Check Page 250 / 11 in the PDF. However, also in the test is the lack of any mention of 2100 Mhz test, which would suggest that either the US 3G Radio won't support 2100Mhz or that it indeed has different hardware that won't support 2100Mhz. At any rate it would be interesting to know if anyone has tried to flash one of the pre-prod roms for the wing 200 onto the wing220 and see if they are able to connect up to 1900+850 3G.
http://gullfoss2.fcc.gov/prod/oet/forms/blobs/retrieve.cgi?attachment_id=890469&native_or_pdf=pdf
I suppose only time will tell.

Wow... nice investigative work. Very interesting. I'll start hunting around for the ROM.
[edit]
Searched google and, my favorite, napalm with no luck. I wonder if we can lure an FCC testing engineer into the XDA-dev realm. muahahaha

I was searching some of the other posts, and it appears that most of the pre-prod radio rom testing had been focused on GPS functionality. Has anyone been able to throw on any of the pre-prod radios with an ATT SIM and tested to see if it can connect to WCDMA -> US Band (1900+850) ??

I have no possibility to check the 3G in the USA from my location in Norway.
But just to get this clear, because I have changed my Radio more often then most people change their underweare.
Is everybody able to select WCDMA and then US Band in the settings?
I dont know if this is selectable on all devices or if this is made available after my radio flahings.

I believe all S730's have the following options available.
Network Type:
Auto
GSM
WCDMA
Band Type:
Auto
US Band
Euro Band
Japan Band
For it to actually be able to operate on all of these frequencies I believe it would need to use the the RTR6285 chipset as the other 2 combos would not support all of the different frequencies combinations.
US Band -> GSM 850+1900 / UMTS 850+1900 (ATT)
Euro Band -> GSM 900+1800 / UMTS 2100
Japan Band -> UMTS 2100+800 (not positive on this one)
If I change band to from Auto -> WCDMA I do not get an error but no 3G Icon and all calls fail. If I then go and change to US Band while having WCDMA selected it indicates that it cannot change to that GSM/UMTS Band. Also interesting, If I stay on WCDMA and select Euro Band, no error, but of course all calls fail. I then tried to change to Japan Band, no error and no phone calls. Finally I am still on WCDMA and I switch to US Band and I get the error that indicates I cannot change to that band. So, I would be interested to know Alcaline if you see the same behavior on some of the other radios you have been trying to see they allow the switch to WCDMA / US Band combo.
Thanks

Can anyone else confirm this behavior on any of the other Radios out there?

Alcaline said:
I have no possibility to check the 3G in the USA from my location in Norway.
But just to get this clear, because I have changed my Radio more often then most people change their underweare.
Is everybody able to select WCDMA and then US Band in the settings?
I dont know if this is selectable on all devices or if this is made available after my radio flahings.
Click to expand...
Click to collapse
I have the ability to tell my phone I am in the states, but it does nothing (default settings though)

Was the US version (WING200) of this phone ever released? Or has anyone gotten the EU version to work on any US 3G networks? Wondering about T-Mobile...

no 3g signal

I hope someone can help me or at least point me in the right direction.
Im in the Philippines and my g1 is unlocked/rooted with the latest cyanogen rom 4.2.6.
The network im connecting to is smart communications with according to http://en.wikipedia.org/wiki/Mobile_network_code has:
515 03 Smart Gold Smart Communications Inc Operational GSM 900 / 1800; UMTS 850 / 2100
our phones have Modes GSM 850 / GSM 900 / GSM 1800 / GSM 1900
WCDMA 1700 / WCDMA 2100
So i should be getting a 3g signal or something but im not, my phone is not even making an attempt to connect to 3g. I have checked the settings and i cant find where to enable 3g. Use only 2g network is not checked. my apn settings seems to be correct but its not even getting to the point where it tries to connect to 3g. I have no 3g symble or edge symbol. please help..

help someone pls

[Q] huawei ideos t-mobile 3g does not work

Hi,
I have a huawei ideos (older non X6 version) and supposedly it is unlocked. It works with 2g/edge. It does not work with 3g. I have looked for APN information and the info downloaded to the phone when I connected to network is identical to what is listed on the net.
tmobile docs url not allowed
i had to add the MMSC setting since it was not there as listed in step 12.
Things which are odd. When choosing access network, it does not say T-mobile 3G. It only says T-mobile 2g, Att 2g and Att 3g. According to the net this phone supports the frequencies for tmobile.
gsm link for u8150 not allowed.
shows HSDPA 900 / 2100 / AWS
HSDPA 850 / 1900 / 2100 / 1700
And
wikipedia entry for tmobile not allowed
shows
1700 MHz/2100 MHz UMTS (W-CDMA)/HSPA 4G (formerly 3G[31]) 2006 2008 (3G), 2010 (Marketed as 4G) First carrier in the U.S. to deploy services on AWS frequencies. Markets HSPA+ as "4G". UMTS band IV
Not sure if HSPDA spec is same as HSPA though.
I did the trick where you enter #*#*4636*#*#* and checked phone settings. I changed to GSM auto (PRL). I also tried to hit menu and select radio band, but it pulls up an empty "Set GSM/UMTS Band" dialog. There is nothing to select.
I guess my question is, does this phone support 3G for t-mobile and if so, what setting am I missing?
thanks in advance.
John

Wrong phone forum this is likely to get frozen.

hi
if u look in the android general forum i did see a few threads for u8150
u have a better chance of getting ur answer their
goodluck

thanks
Thanks, I moved the question to general forum.

Modem Type For Motorola Phone Power

Hi all,
I am looking to determine what kind of modem the Moto One Power has and what bands it physically can handle.
According to the website - Networks + bands
2G: GSM band 2/3/5/8, 3G: WCDMA band 1/5/8, 4G: LTE band 1/3/5/8/38/40/41
https://www.motorola.in/products/motorola-one-power#specs
I just want to know if the missing LTE bands are just outright missing or just disabled.
Can anyone let me know what the FCC codes are on their phone as well?