blackberry for Nike - Touch Dual, MDA Touch Plus Accessories

Can somebody help me to find a working software to use BBC on my Touch Dual?
I have try programs, but nothing works.
Many thanks for answers!

Have you tried here -http://www.sems.org/entry.asp?ENTRY_ID=225. Also make sure you have blackberry enabled by your provider and that you install to main memory

Related

Msn issue.... no connection...

Hi !!
edited from another thread....
I am enjoying my Kaiser very much, but still got some problems....
Any advice is always welcome !
When I first used my TyTn II, after charging, I logged on to MSN with no problems. Haven't used MSN since....
I don't think the Vodafone signal is so good where I live but I can usually connect to the Internet using Explorer or Opera, but I can't seem to make MSN connect.
I was in the city centre today where the signal should be strong but MSN still would not connect.
It does not give an error message, just that I might be in an "area with bad reception".
Vodafone tell me my services are all OK for my phone...
If I use WiFi at home, I still cannot connect MSN using WiFi
I am not sure where to begin to diagnose the problem with MSN. I will start searching now........ but any advice is appreciated...
edit... I am wondering whether to unistall MSN and re-install
Any advice appreciated!
Ofiaich
I would re-install MSN with the latest version, and try again...
found in the sticky.
http://forum.xda-developers.com/forumdisplay.php?f=377
Hi Jewcookie!
thanks ! I downloaded frm here and will check that it is the latest..
It is WLM Build 1400 ....
But are there any other solutions?
Ofiaich
would this installed version of MSN use data or TXT message allotment?
Hi,
i read in another thread that it is data,,
Ofiaich
Hi!
can anyone think of good reasons why my MSN stopped working, and what i can do about it?
I would rather try to sort out the problem, than just install another version..
Ofiaich
are you using windows live messenger or are you using OZIM or another IM program?
I know with OZIM, since it uses text it doesn't connect when you are on wifi.
I was using the MSN thatis built into the ROM!!
Ofiaich
I know you are in UK and things are different but the IM program built into the rom for me was OZIM which uses texting. I would suggest to go the sticky of useful cabs and download Windows Live, thats has Live Messenger Built into it.
http://forum.xda-developers.com/showthread.php?t=332438
Are you asian?
I know that some olders versions of CE-stars could lead to malfunctioning of live messenger=/ so even if you aren't azn if you install language support for other languages it might still screw things up
Thanks jallenclark and season007,
My Kaiser has Windows live and MSN, but not working..
I am Irish, but I have Japanese display and input installed on my Kaiser...
I guess I could remove them and see if my MSN works again..!!
Then if it does not work, install the newest cab for Windows Live and MSN..
Thanks...
Ofiaich
Hi!
removing Japanese fonts and input did not resolve the problem....
I really do not understand why my MSN does not connect... when Agile Messenger does...
edit - I did a hard reset and installed everything from scratch, checking one by one, if MSN worked.
It stopped working after the installing of Japanese dispaly and input software...
Ofiaich
so any way to make MSN and CE Star works together ?

PC based control

I was wondering if there was any PC software that I could use to control my windows mobile 6 Kaiser/at&t tilt. I want to be able to control my text messaging specificly. This means I want to be able to type text messages on my PC and they be sent through my cell phone. Is this possible? Thanks all
TheCougar said:
I was wondering if there was any PC software that I could use to control my windows mobile 6 Kaiser/at&t tilt. I want to be able to control my text messaging specificly.
Click to expand...
Click to collapse
You can use MyMobiler, it's free.
There also are some Outlook-Addons like Jeyo, but this one isn't free...
I use SOTI Pocket Controller. its not free but it will let you do everything you normally do through your phone through the pc with a very nice user interface
petervbeck thank you so much. this is perfect. just like my cell phone was an app on my computer and I can use my mouse and keyboard to control it. texting is simple with it. thanks again.
dolbe said:
I use SOTI Pocket Controller. its not free but it will let you do everything you normally do through your phone through the pc with a very nice user interface
Click to expand...
Click to collapse
Is it worth getting Pocket Controller
I Have a Tilt is there diff kinds 1.5/ 1.6
which did u get or which should i get for mine
Link - http://www.soti.net/default.asp?Cmd=Products&SubCmd=PCPro
ilordvader said:
Is it worth getting Pocket Controller
I Have a Tilt is there diff kinds 1.5/ 1.6
which did u get or which should i get for mine
Link - http://www.soti.net/default.asp?Cmd=Products&SubCmd=PCPro
Click to expand...
Click to collapse
I believe the latest version is pocket controller pro v6.01. If your not sure wether to get it or not download the trial first. If you like it buy it. what it does over the other apps similar to this is it uses all the softkey option like you would on your Kaiser plus you can setup hotkeys for spacific applications. I find it especially usefull when I have formatted my Kaiser and reinstalling apps. I makes it so much easier to enter the serial codes through the pc keyboard and you can even install apps without touching your phone aslo. replyiong to texts and emails are made easier, running programs work great also
dolbe said:
I believe the latest version is pocket controller pro v6.01. If your not sure wether to get it or not download the trial first. If you like it buy it. what it does over the other apps similar to this is it uses all the softkey option like you would on your Kaiser plus you can setup hotkeys for spacific applications. I find it especially usefull when I have formatted my Kaiser and reinstalling apps. I makes it so much easier to enter the serial codes through the pc keyboard and you can even install apps without touching your phone aslo. replyiong to texts and emails are made easier, running programs work great also
Click to expand...
Click to collapse
Thank you man
Ill try it out
One more Q out of place but
How do i get online on my laptop
useing my Tilt Phone
can anyone give step by step Instrution Please

Windows Live Messenger on WM6?

Forgive me if this sounds stupid, believe I've done a lot of search before asking =/
anyway here it goes:
After flashing the ROM posted in the sticky "Herald MODDing for newbs" I can't find my MSN messenger anywhere. Now I can only use the web version! Where can I get it back? Is a .cab or something out there?
Oh, and, I can't figure out how to use touchflo as well. I tried wiping the screen from bottom to top a LOT times. Nothing happened. Everything else worked, tho, like picture viewer or finger-scrolling.
Here is a zip wich includes the Windows Live Messenger installation CAB file.
Just install it on your device and your done. The settings you need to work through are very easy.
Installation completed with no problem. But..
It doesn't matter whether I'm on wi-fi or GPRS, when I try to sign in it says "Windows Live was unable to establish an Internet Connection." and blah blah blah. Asking me to check my connection settings. Well, IE worked fine. I can surf. So what's going on?
Thx
Thanks been looking for this
Works great on my wing
Have my msn mail on mail lits
next thing i need it how to auto check names on mms works on sms
never mind. I googled aggressively and found that it was an older version of software conflicting with Windows Live Mobile. It was called CE Star. The newest version does not have the connection problem.
Im glad to help you guys. Want anymore cabs ??
ElProempie said:
Im glad to help you guys. Want anymore cabs ??
Click to expand...
Click to collapse
well..... if u insist, the newest Office with one note would be great!
Thanks!
flatcoke said:
never mind. I googled aggressively and found that it was an older version of software conflicting with Windows Live Mobile. It was called CE Star. The newest version does not have the connection problem.
Click to expand...
Click to collapse
I'm glad that you were able to resolve your issue with the Windows Live Mesanger but unfortunately im unable too. I am able to connect via WiFi but im not able to connect GPRS, are you able to connect w/o WiFi? If so, do you have a .cab file or a website that you can direct me too. Any help on this issue would be great. Thanx
It still does not work for me
flatcoke said:
never mind. I googled aggressively and found that it was an older version of software conflicting with Windows Live Mobile. It was called CE Star. The newest version does not have the connection problem.
Click to expand...
Click to collapse
After uninstall ce-star, I had same problem:
I setup both wi-fi and bluetooth dialup through my cellphone. Even when wi-fi is connected, windows live insist on dialing through bluetooth. And the worst of it, it will keep on dialing until soft reset and nothing else can stop it.
Any idea?
Thanks

TomTom 930 SMS and profiles in Bluetooth

I see in CommManager Settings>Bluetooth>Profiles>Supported Profiles, alot of profiles. I have TomTom GO 930 with hands-free by bluetooth where I can make and receive calls...with 3G enable I can use the TomTom services (like weather, etc) but I have in TTom an option to read and send a sms and is not allowed because (maybe) fault another profile. Can you people say something about my request?!
Thanks
I would also like to be able to get my messages off my Diamond onto my TomTom, I have the GO 530 though.
Anyone able to help with this?
I have this same problem with car-ser Blue&Me (Fiat Bravo) - it cannot load sms from phone with windows mobile?
Can anybody help this (jetwaremobile nothing change). Mayby sombody can modify some settings to view effect?
I think nobody say 'I do...this' and we have a profile to read/send SMS in TomTom GPS
anything...?
http://www.tomtom.com/phones/compatibility/phones.php?brandId=22
It is not possible.....the full tomtom compatibility with bluetooth is only for few phones models
It's hard to tell what is or isn't compatible. Their list is ridiculously out of date!
evilskanker said:
It's hard to tell what is or isn't compatible. Their list is ridiculously out of date!
Click to expand...
Click to collapse
And where are your updated list?
i know for some years how works tomtom's pna and i can tell you the list is have a year old, if you read the small letter tt only test a little part of phones models, but the features not change so much........if you want have a hope, you can, sure.....
Bump! Kaiser and GO730
would love a fix for this if there is one yet
How you guys got your Diamond working with go930 ?
Hi Guys
I also have HTC Diamond and ToTom go930. I can not get them working together as a hands free. They paired together first time and after i maid my first call go930 rebooted and after that it does not want to dicsover or connect to my phone properly (or at all). Deleting and recreating profiles on both devices did not help.
Any suggestions ?
Thanks

[ROM] French snapvue liberated +gps

Hi,
As promished, the french version of my rom. Cab install is working, and opera is removed on popular demand. Got usbtools, and taskmanager, even if the icon is not here now. Exe is in windows folder.
This one also has d3d software dll linked.
http://rapidshare.com/files/142052168/snapfrench4.rar.html
yes
again a big thanks to you
sorry for havent seen it before
thanks
too early? but thxs !
great!! thank you very much for the time and work you spend for the shift communoty!
i m very happy to flash this rom cause french is my native linguage, and it gives to me more compatiblity with french software.
maybe its to early to cook french rom, because htc shift is not easy to finf in french shops... orange is selling it with origami data plans, but its not very popular , finally the best way to get it is to make special order, or to by it from internet .
you should focus your time on english rom, and maybe spanish as its seconf or third language used in the world
Anyway thank you very much fr this rom !!!
by the way i love opera but there are so many release and a few are working well on the htc shift
c u,
The one I have included in rom works pretty well. I might release it also infrench (my native language too )
any progress on phone feature?
thaihugo said:
The one I have included in rom works pretty well. I might release it also infrench (my native language too )
Click to expand...
Click to collapse
thaihugo
I compared the registry files of both Tilt and Shift (I don't have Diamond or Ralpheal) and found some interesting differences in the case of BT, WiFi and SD card. I am going to publish those here in a few hours.
I have not seen much differences in the phone area (registry settings) except missing settings for phone and relevant skin settings under Machine and Current User.
thanks
Ram
saiweb said:
thaihugo
I compared the registry files of both Tilt and Shift (I don't have Diamond or Ralpheal) and found some interesting differences in the case of BT, WiFi and SD card. I am going to publish those here in a few hours.
I have not seen much differences in the phone area (registry settings) except missing settings for phone and relevant skin settings under Machine and Current User.
thanks
Ram
Click to expand...
Click to collapse
Problem is not to find registry settings. These are pretty easy to add. This registry can be usefull anyway, but the main problem is that the bios is locking the SD and BT for vista, and even with the right drivers, they will not be activated on WM side. One think that would improve the dev here is to find how this mecanic works.
As for the phone, using a full phone dll and registry doesn't help, as it seems the dll provided with the shift are voice disabled, and using new depend on the radio.
thaihugo said:
Problem is not to find registry settings. These are pretty easy to add. This registry can be usefull anyway, but the main problem is that the bios is locking the SD and BT for vista, and even with the right drivers, they will not be activated on WM side. One think that would improve the dev here is to find how this mecanic works.
As for the phone, using a full phone dll and registry doesn't help, as it seems the dll provided with the shift are voice disabled, and using new depend on the radio.
Click to expand...
Click to collapse
Regarding BT, WiFi and SD that is what I guessed. Since they are shared, only one of them would work at a given time with the given architecture. Regarding phone, my guess also coincides with you. I think we need to have a different radio, but I may be wrong too.
Thanks
Ram
RIL proxy, driver and client support Phone Calls
thaihugo said:
Problem is not to find registry settings. These are pretty easy to add. This registry can be usefull anyway, but the main problem is that the bios is locking the SD and BT for vista, and even with the right drivers, they will not be activated on WM side. One think that would improve the dev here is to find how this mecanic works.
As for the phone, using a full phone dll and registry doesn't help, as it seems the dll provided with the shift are voice disabled, and using new depend on the radio.
Click to expand...
Click to collapse
Finger's crossed, the RIL client (celltsp.dll) is same as the one you will find in Kaiser. The RIL proxy, RIL Client etc. are same you will find in Kaiser, only question left for now is whether the Radio i.e. underlying supports voice calls or not.
Thanks
Ram
Nice rom thks.
But so bad that the keyboard become an qwerty.
With registry it's fine but you may include it in your update...
BTW, very nice rom. No problem.
Hello
I don't like to act like a noob (especially in the HTC world in which I had a lot of phones without any real problems...), but here I can't make it...
I put the ROM, perfect. But here the things I can't understand :
- can't open the sound from the today view
- usbtool (I really had hard time to find the soft!!!), I can't do nothing with it, there is a sentence "Please plug in cable firest" and I tried "USB_cable_in" but nothing happened... So I can't connect to Vista... Where am I wrong?
I think I can manage the others things, like buttons, qwerty, ... but for the usbtool thing I am really lost... so I use "Internet share" when it is working...

Categories

Resources