!!! USE THIS GUIDE ONLY IF YOU KNOW WHAT YOU ARE DOING !!!
!! READ THE END OF THE GUIDE FIRST(Very Importnat)
Aplication Unlock - lets you run unsigned software
SSPL - Software Second Program Loader is a boot loader after IPL (Initial Program Loader) often seen on smart phones and PDA:s.
- Lets you flash any rom on the phone
SPL 1.09 http://rapidshare.com/files/106089565/MTeoR_-_EUR1.09SPL.rar.html
[B]official HTC ROMS[/B]
RUS
http://rapidshare.com/files/106091396/RUU_MTeoR_1.34.261.1_1.38.00.10_HTCRUS_SHIP.rar.html
UNLOCK TOOLS
http://rapidshare.com/files/105133496/Unlock_HTC.rar.html
1. Folder "1"
put the file "SP_AllowCertificateInstall.cab" into the temp folder on you mobile phone (use active sync)
to connect. Execute the cab file on your phone.
2.Folder "2"
make sure you are connected to the phone threw active sync. Now run "EnableRAPI.bat" it will say if
it has succeded.
3.Folder "3"
make sure you are connected to your mobile phone through active sync. Start "MobileRegisteryEditor.exe"
Now go to SPV_C600 than HKEY_LOCAL_MACHINE than Security than Policies than Policies
so that you are in HKEY_LOCAL_MACHINE\Security\Policies\Policies
Now dubble click 00001001 (the first one after (Default)) and change the value to 1
Now dubble click 00001005 (the second one after (Default)) and change the value to 40
4.Folder "4"
put the file "Cert.cab" into the temp folder on you mobile phone (use active sync)
to connect. Execute the cab file on your phone.
5.Folder "5"
install and run HTC Security Manager.msi
select Security Off
Wait
YOUR PHONE IS APPLICATION UNLOCKED
6. Restart the phone
press and hold CAMERA+POWER while powering
you should see spl version
NOTE THAT VERSION
PULL OUT THE BATTERY AND POWER THE PHONE
7.1 Try to flash wwe rom directy
if you have wwe use sspl 1.01 http://forum.xda-developers.com/attachment.php?attachmentid=38680&d=1178637546
WWE rom
http://rapidshare.com/files/106091341/RUU_MTeoR_1.34.251.1_1.38.00.10_HTCEUR_SHIP.rar.html
after this you need to begin from step 1 till you see spl 1.10
now you have SPL 1.10 and CID HTC__Z12
jump to step 8
7.2 If 7.1 does not work try
7.2.1.SPL 1.09 http://rapidshare.com/files/106089565/MTeoR_-_EUR1.09SPL.rar.html
now you have SPL 1.10 and CID HTC__A07
7.2.2.you need to run the RUS update
RUS
http://rapidshare.com/files/106091396/RUU_MTeoR_1.34.261.1_1.38.00.10_HTCRUS_SHIP.rar.html
after this you need to begin from step 1 till you see spl 1.10
jump to step 8
8.flash any rom
now to flash an rom use SSPL 77.7 http://rapidshare.com/files/106072098/SSPL.rar.html
Copy the coresponding SSPL to the ROOT of the PHONE not the SD-CARD
run SSPL on the phone and immediatly press CAMERA+POWER
YOU SHOULD SEE TRI-COLOR SCREEN displaying spl 77.7
This SPL is allowing you to flash latest radio
or to Flash any rom usin sspl 77.7
Run the update from the PC
VERY IMPORTANT
i found a way to installl hardspl
1. unplug phone from usb
2. take out the battery/put it back
3. enter bootloader (press camera+power)
4. check for spl if it sais 2.05 you can go further if not read the fisrt guide
5. enter in windows
6. extract and copy to device root http://rapidshare.com/files/138396463/breeze_HARDSPL.rar.html
7. copy to storage card root BREEIMG.NBH
8. it should say SPL-1.01
9. follow onscreen instruction for the update
10.enter in windows and delete BREEIMG.NBH from card
11.enter bootloader (press camera+power)
12.it should say spl 7.77
13.be happy now you have hardspl and you can flash any rom (without sspl)
BEST REGARDS
i don't know whats the problem with appunlocking... there are 5 Regkeys that have to be set,... it stands all in wiki
http://wiki.xda-developers.com/index.php?pagename=Breeze_Registry
Application Unlock
http://wiki.xda-developers.com/uploads/Policies.reg
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"00001017"=dword:00000090"00001005"=dword:00000028"00001001"=dword:00000001after doing this run SDAunlock app (google for it) or
add:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"0000101b"=dword:00000001
Running unsigned Apps without confirmation!
add:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"0000101a"=dword:1
GREATLY APPRECIATED! finally some good explainations. so let me get this straight,
SSPL = application unlock? (im asking this because i already have my phone app unlocked using SDA security unlock software)
i have a dopod 595 and,
my IPL is 0.90 (do i need to update this?)
SPL is 2.05 (so i need to use the SPL>1.09)
radio is 1.06.00.10 (do i need to update this?)
RIL is 2.002
do i need to update anything before i try your WM6.1? which is the latest versions (IPL,Radio) you would recommend and can you please provide the links too. also, will the forward facing video call camera work with your ROM?
from wiki, it looks like there is the Radio:1.38.00.10 Protocol:32.71.7020.12H RIL:2.002 SPL:1.10.0000 ROM, and other older Radio ROMs but with newer SPL. so in order to update my radio, do i need to flash the entire ROM into my phone, or can i just use a Radio ONLY rom updater?
Please bear with me, because i really do not want to brick my phone.
Admin, please make this thread sticky. cheers
alexnvidia said:
GREATLY APPRECIATED! finally some good explainations. so let me get this straight,
SSPL = application unlock? (im asking this because i already have my phone app unlocked using XDA unlock software)
i have a dopod 595 and,
my IPL is 0.90 (do i need to update this?)
SPL is 2.05 (so i need to use the SPL>1.09)
radio is 1.06.00.10 (do i need to update this?)
RIL is 2.002
do i need to update anything before i try your WM6.1? which is the latest versions (IPL,Radio) you would recommend and can you please provide the links too. also, will the forward facing video call camera work with your ROM?
from wiki, it looks like there is the Radio:1.38.00.10 Protocol:32.71.7020.12H RIL:2.002 SPL:1.10.0000 ROM, and other older Radio ROMs but with newer SPL. so in order to update my radio, do i need to flash the entire ROM into my phone, or can i just use a Radio ONLY rom updater?
Admin, please make this thread sticky. cheers
Click to expand...
Click to collapse
i had 2.05 spl
i flashed the 1.09 spl from first topic
i flashed the latest wwe rom
now i have 1.10 spl
radio 1.38 from oficial rom
app unlocked
sspl
flashed wm6.1
jerpelea said:
i had 2.05 spl
i flashed the 1.09 spl from first topic
i flashed the latest wwe rom
now i have 1.10 spl
radio 1.38 from oficial rom
app unlocked
sspl
flashed wm6.1
Click to expand...
Click to collapse
im going to flash to WWE now with this version : HTC MUI BREE100 1.34.251.1 1.38.00.10 32.71.7020.12H 15673.3.3.1 3.3.1 2.002 1.10.0000 , then update to your WM6.1.
am i doing the steps right?
OK, i've done all the steps you provided in post no.1 (great instructions by the way). problem, when i run SSPL on the root of the device, the screen close blank and nothing happens even though im still pressing the camera+power button. what should i do now?
OK, i've done all the steps you provided in post no.1 (great instructions by the way). problem, when i run SSPL on the root of the device, the screen goes blank and nothing happens even though im still pressing the camera+power button. i had to unplug the battery to restart the device. am i doing anything wrong here?
Update : Now i got it. i had to run the SPL link, not the SSPL.exe as written in the first post. must be a typo.
Update2 : Success!! flashed to WWE. now proceeding to your WM6.1!!
Update3 : Running WM6.1 B1 now! thanks jerpelea! you're the man!
Admins please make this thread sticky.
I have I-Mate SPJas. I have tried several unlock tools including HTC Unlock toll, resgistry edit, SDA Unlock....
My original SPL version was 2.05 and after I ran SPL file I had IPL=SPL by des and SPL=7......
I have also applied other methods and my phones seems to be application unlock. But when I try to upload a new rom the phone goes to blank. I could never prevent this condition.
Is there a way to update Imate SPJas to Win 6.1? Which ROM works?
caglar_altan said:
I have I-Mate SPJas. I have tried several unlock tools including HTC Unlock toll, resgistry edit, SDA Unlock....
My original SPL version was 2.05 and after I ran SPL file I had IPL=SPL by des and SPL=7......
I have also applied other methods and my phones seems to be application unlock. But when I try to upload a new rom the phone goes to blank. I could never prevent this condition.
Is there a way to update Imate SPJas to Win 6.1? Which ROM works?
Click to expand...
Click to collapse
all roms work
follow the guide and will work
rom
I have gone through all of the steps of ROM update.
When the rom update utility prepare for installing, after I press "ENTER" the device closes immediately and the connection with ActiveSync stops.
In three color screen I see:
IPL SSPL by des
SPL : 1.01
Enter
When I go through root directory and enter to SSPL.exe, the phone again shut down and I have to removE/install battery to start the phone.
Please help!!
caglar_altan said:
I have gone through all of the steps of ROM update.
When the rom update utility prepare for installing, after I press "ENTER" the device closes immediately and the connection with ActiveSync stops.
In three color screen I see:
IPL SSPL by des
SPL : 1.01
Enter
When I go through root directory and enter to SSPL.exe, the phone again shut down and I have to removE/install battery to start the phone.
Please help!!
Click to expand...
Click to collapse
Hi, I had the same issue. Try pressing camera & off' buttons AND Enter all together.
rom update
1- I have updated the current rom to origininal config by manufacturer's original ROM.
2- I applied HTC unlock tool..
3- My first attempt to update rom gave #262 error. Second attempt was succesful.
thanks.
futureshock said:
i don't know whats the problem with appunlocking... there are 5 Regkeys that have to be set,... it stands all in wiki
http://wiki.xda-developers.com/index.php?pagename=Breeze_Registry
Application Unlock
http://wiki.xda-developers.com/uploads/Policies.reg
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"00001017"=dword:00000090"00001005"=dword:00000028"00001001"=dword:00000001after doing this run SDAunlock app (google for it) or
add:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"0000101b"=dword:00000001
Running unsigned Apps without confirmation!
add:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"0000101a"=dword:1
Click to expand...
Click to collapse
there are 5 keys unless you have the official security configuration manager
that is setting the other keys for you
BR
HARDSPL
hy all
i found a way to flash hardspl to breeze
this will allow to flash any rom from any cid so that you will not break devices due to wrong cid
BR
is there anyway to hard spl without going into windows? my device is stuck at windows 2nd boot screen (windows mobile 5 logo)
jerpelea said:
hy all
i found a way to flash hardspl to breeze
this will allow to flash any rom from any cid so that you will not break devices due to wrong cid
BR
Click to expand...
Click to collapse
That sounds interesting..!
alexnvidia said:
is there anyway to hard spl without going into windows? my device is stuck at windows 2nd boot screen (windows mobile 5 logo)
Click to expand...
Click to collapse
no
you must get to windows
what is your current cid?
i have a dopod 595 device, the breeze with forward facing video call camera, so it's a breeze 160. it's a Qtek_Z12 device and the region is WWE.
before you posted the new herm radio, i successfully updated to your beta WM6.1 using your unlocking SSPL guide. i never upgraded the SPL though. the original phone's IPL and SPL are IPL0.9 and SPL2.05.
so what i did was first to upgrade to the latest WWE 1.38 using your unlocking/SSPL guide, then upgrade to your WM6.1 beta. everything worked fine. i do notice that only the IPL has been upgraded, and the SPL remains 2.05. so i ignored it.
it was when you posted the new herm radio upgrade i then decided to update my SPL as well. so as per your instructions in the unlocking guide, i first unlock the phone (WM6.1), perform the SPL1.09 update. it was successful. phone booted up just fine. then i run the official WWE 1.38 (the same one i used before upgrading to WM6.1 beta). and this time i did not run the DES soft SPL ( i must have forgotten and thought the phone is unlocked anyway). the RUU started, and the flashing failed at 1% giving an invalid vendor ID error message (as expected because my phone is not superCID and i forgot to run DES SSPL). after this little incident, i canot boot my phone anymore.
so i tried to recover it using various methods. and i successfully flashed back the original WM5 WWE dopod 595 ROM by using the latest RUU from 1.38 with old WWE WM5 nbh. the flashing completed 100%, the phone reboots, and still stuck at the second boot screen. IPL has been downgraded to 0.9 and SPL remains 1.09.
this is what i get
iinfo 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
alexnvidia said:
i have a dopod 595 device, the breeze with forward facing video call camera, so it's a breeze 160. it's a Qtek_Z12 device and the region is WWE.
before you posted the new herm radio, i successfully updated to your beta WM6.1 using your unlocking SSPL guide. i never upgraded the SPL though. the original phone's IPL and SPL are IPL0.9 and SPL2.05.
so what i did was first to upgrade to the latest WWE 1.38 using your unlocking/SSPL guide, then upgrade to your WM6.1 beta. everything worked fine. i do notice that only the IPL has been upgraded, and the SPL remains 2.05. so i ignored it.
it was when you posted the new herm radio upgrade i then decided to update my SPL as well. so as per your instructions in the unlocking guide, i first unlock the phone (WM6.1), perform the SPL1.09 update. it was successful. phone booted up just fine. then i run the official WWE 1.38 (the same one i used before upgrading to WM6.1 beta). and this time i did not run the DES soft SPL ( i must have forgotten and thought the phone is unlocked anyway). the RUU started, and the flashing failed at 1% giving an invalid vendor ID error message (as expected because my phone is not superCID and i forgot to run DES SSPL). after this little incident, i canot boot my phone anymore.
so i tried to recover it using various methods. and i successfully flashed back the original WM5 WWE dopod 595 ROM by using the latest RUU from 1.38 with old WWE WM5 nbh. the flashing completed 100%, the phone reboots, and still stuck at the second boot screen. IPL has been downgraded to 0.9 and SPL remains 1.09.
this is what i get
iinfo 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
Click to expand...
Click to collapse
you can not do anithing
your ipl does not know how to load spl1.09
send the phone to repair and flash hardspl when it returns
there are many people with your problem
till now we have found not found any solution
BR
my phone is out of warranty, so sending for repair will cost me a lot. we'lll keep our fingers crossed and hope you guys can find a solution for us soon. thank you
i think, SPL version is very confusing. 2.05 is older than 1.09?
Would be good to have compatibility list between SPL and IPL versions to not mess and brick device.
I guess i was lucky, because i updated my breeze to resently posted HardSPL (thanks to jerpelea) and device still alive.
I found that RUUUpdateUt.exe i've used for DES SoftSPL is not working with HardSPL anymore. It cost me a bunch of my nerves (no body mentioned this fact!). Again luckily i found that stock RUU upgrade utility works fine with HardSPL (i just removed all dialogs except first for convenient use).
Well, at last, now i don't need to flash stock firmware (with radio ROM update which is extremely dangerous) every time when one of my cooked ROM refuses to work normally.
Related
hi,
i looked around for instructions on how to upgrade the ROM but i couldn't find any.
i have a very old ROM and i want to upgrade it to the latest ROM that includes the A2DP, etc.
how do i go about installing it? is it like installing a regular application? i have a Qtek 9100.
thanks,
Re: Simple guide - Unlock Vario and update to other ROMs
For anyone else who has had the same problem as we did, follow these simple instructions:
First download lokiwiz v2b. Don't use previous versions or you'll not get through this!!
Hard reset your device (not necessary, but it ensures you'll have no hassle with Activesync).
Done that? Good. Extract the lokiwiz v2b .zip folder and copy enablerapi.cab to your memory card or to 'My Documents' folder on your device. Then execute the 'enablerapi.cab'.
Done? Just switch off the device (power button; put it in standby mode).
If you have Activesync already installed, un-install it and re-install directly afterwards (ensure a brand new partnership).
Then when prompted by Activesync, plug in your USB cable PC-PPC and it should recognise as usual.
Then execute the lokiwiz.bat file (in the folder that was generated earlier when you extracted the lokiwiz02b.zip file) and when you see the MS Dos (black screen) choose the option CID Unlock (SuperCID) and wait for it to COMPLETELY finish. You'll know it's finished when your Wizard is re-booting. Plug out your USB cable at this stage.
Once re-booted and back into WM5, re-connect your cable and if all goes well it should re-connect to Active Sync (wait till it has finished syncing or says connected!).
Finally......double click the executable file, which should be:
RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
Hopefully it will now install the ROM without hiccups (about 10 minutes).
Sorry to you gurus for the lengthy explanation, but some of us are still relatively inexperienced to this and a thorough (if you can call it that) explanation of the processes will really be appreciated. I certainly have done when some of guys broke it down to me in the past.
I'm hoping this ROM will not dissapoint me as the others have done, as I've been getting quite frustrated and angry about the whole WM5 & HTC thing.
Good luck. :wink:
Last ROM:
Custom ROM: O2 ROM
Rom Version: 1.5.4.2 WWE
Rom Date: 11/8/05
Radio version: 01.12.10
Protocol version: 4.0.13.23
ExtRom: Removed by default (xtra 10 megs in extended ROM through total Commander)
Current ROM
Qtek ROM:
Rom Version: 1.6.7.1 WWE
Rom Date: 11/28/05
Radio version: 01.13.10
Protocol version: 4.0.13.24
ExtRom: 1.6.7.101[/quote]
Credit goes to machinagod, button and all you other guys who helped me. Cheers
thanks for finding the informaiton for me!
Thanks for the breakdown. I am new to all this, and not too au fait with all the developer terms, and it can be quite intimidating!
I have an O2 branded XDA Mini S and want to use it with Vodafone SIM card. The device is unlocked, so I can make and receive calls - good start!
However, I want to get rid of all the O2 branding and install the vodafone GPRS/SMS/MMS etc. settings. From what I've read on the forums, the O2 stuff slows the unit down, and it will all be irrelevant anyway. Does the extended ROM you refer to above then get the unit into an "unbranded" state?
Basically, I just want the unit without any trace of O2 (boot splach screen, O2 active etc.) and to be able to put the Vodafone settings in manually...
Thanks
Thanks mackaby007 - managed to update rom using your instructions, and got rid of O2 screen using aWizard!
Unlock to Lock
Hi,
Can anyone tell me how to lock the phone back so for example if I had to send it to T-Mobile.
Thanks
Msuk
Re: Simple guide - Unlock Vario and update to other ROMs
mackaby007 said:
For anyone else who has had the same problem as we did, follow these simple instructions:
First download lokiwiz v2b. Don't use previous versions or you'll not get through this!!
Hard reset your device (not necessary, but it ensures you'll have no hassle with Activesync).
Done that? Good. Extract the lokiwiz v2b .zip folder and copy enablerapi.cab to your memory card or to 'My Documents' folder on your device. Then execute the 'enablerapi.cab'.
Done? Just switch off the device (power button; put it in standby mode).
If you have Activesync already installed, un-install it and re-install directly afterwards (ensure a brand new partnership).
Then when prompted by Activesync, plug in your USB cable PC-PPC and it should recognise as usual.
Then execute the lokiwiz.bat file (in the folder that was generated earlier when you extracted the lokiwiz02b.zip file) and when you see the MS Dos (black screen) choose the option CID Unlock (SuperCID) and wait for it to COMPLETELY finish. You'll know it's finished when your Wizard is re-booting. Plug out your USB cable at this stage.
Once re-booted and back into WM5, re-connect your cable and if all goes well it should re-connect to Active Sync (wait till it has finished syncing or says connected!).
Finally......double click the executable file, which should be:
RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
Hopefully it will now install the ROM without hiccups (about 10 minutes).
Sorry to you gurus for the lengthy explanation, but some of us are still relatively inexperienced to this and a thorough (if you can call it that) explanation of the processes will really be appreciated. I certainly have done when some of guys broke it down to me in the past.
I'm hoping this ROM will not dissapoint me as the others have done, as I've been getting quite frustrated and angry about the whole WM5 & HTC thing.
Good luck. :wink:
Last ROM:
Custom ROM: O2 ROM
Rom Version: 1.5.4.2 WWE
Rom Date: 11/8/05
Radio version: 01.12.10
Protocol version: 4.0.13.23
ExtRom: Removed by default (xtra 10 megs in extended ROM through total Commander)
Current ROM
Qtek ROM:
Rom Version: 1.6.7.1 WWE
Rom Date: 11/28/05
Radio version: 01.13.10
Protocol version: 4.0.13.24
ExtRom: 1.6.7.101
Click to expand...
Click to collapse
Credit goes to machinagod, button and all you other guys who helped me. Cheers[/quote]
Hi,
Where do I download this lokiwiz v2b from ?????
Question I have is ... if after CID unlocked, and upgraded with different brand (DOPOD) ROM, When I upgrade again and use say and O2 ROM, do I need to CID unlock again?
ikkoku said:
Question I have is ... if after CID unlocked, and upgraded with different brand (DOPOD) ROM, When I upgrade again and use say and O2 ROM, do I need to CID unlock again?
Click to expand...
Click to collapse
No, you need to do CID unlock only once.
Cheers
hrb
Thanks for the help!
Hi,
I am try to replace the T-mob ROM to QTEK ROM on a Wizard Phone.
I tryed by using aWizard and lokiviz but notin to do.
All action are been performed (unlock CID, enable rapi).
My device have the latest T-mob ROM
OS:2.21.2.6
GSM:02.19.11
SPL:2.21.1.0001
Have I do downgrade the SW?
BR
Alex
squarna said:
Hi,
I am try to replace the T-mob ROM to QTEK ROM on a Wizard Phone.
I tryed by using aWizard and lokiviz but notin to do.
All action are been performed (unlock CID, enable rapi).
My device have the latest T-mob ROM
OS:2.21.2.6
GSM:02.19.11
SPL:2.21.1.0001
Have I do downgrade the SW?
BR
Alex
Click to expand...
Click to collapse
I have the exact same problem. Both Loki and aWizard don't work.
Typically when you want to downgrade your phone to an earlier (or shipped version) you need to first downgrade it to Button's 1.05, then you can "upgrade" to back to the desired 1.x or 2.x ROM.
Is that what you're asking?
Steven
chow
how is possible to downgrade the wizard phone to 1.05?
I have a T-mob wizard phone with inside IPL 2.21.0001,GSM 2.19.11, OS 2.21.2.6.
Have I to follow the below step?
1)dovngrade to 1.05 . Is necessary only OS or boot loader and ratio too?
2)perform again the flashing procedure.
Regards
Alex
squarna said:
how is possible to downgrade the wizard phone to 1.05?
I have a T-mob wizard phone with inside IPL 2.21.0001,GSM 2.19.11, OS 2.21.2.6.
Have I to follow the below step?
1)dovngrade to 1.05 . Is necessary only OS or boot loader and ratio too?
2)perform again the flashing procedure.
Regards
Alex
Click to expand...
Click to collapse
looks to me that you have a "G4" chipset, I can tell because you are reporting the IPL 2.21.0001 and not just IPL 2.21 Maybe someone else can verify this???? If so please please DONT try to flash before you have researched "G4" chipset flashing first
Dear sir,
you true!!
I have just read a post were is explained that if you have G4 chip is not possible to downgrade or upgrade the ROM.
Bootloaders (IPL/SPL) with .0001 at the end of the version are G4 flash chips.
This info will be very halpefully for everybody need to perform any flashing action on wizard phone.
Do you confirm that is actually not possible to solve this issue?
Regards
Alex
Have a look here http://forum.xda-developers.com/viewtopic.php?t=55757
http://forum.xda-developers.com/viewtopic.php?t=54578
http://forum.xda-developers.com/viewtopic.php?t=55972
I am very confused...
OK.
My wizard have G4 chip inside.
I was been able to remove the SIM lock.
If I try to CID unlock the device I receive CID unlocked successfull but after a ROM update the device stuck at startup.
Now...if I pay on http://www.imei-check.co.uk/ 20£ will be possible to change the ROM?
JAFWM
Hi,
I discovered a SW named JAFWM that is able to flsh evry ROM.
Is this true?
@squarna - Sorry mate but TBH with myself not having a G4 chipset Ive not taken much notice of any post relating to them, if no one else jumps in soon try starting a new thread with the title like "G4 chipset What roms work?" or something and good luck!
I just upgraded my QTEK 9100 with the latest RIsidoro rom and have now a 2.26 OS but...always an ipl 1.03 and a spl 1.03.0000.
The device hangs and I can't have any activsync runnuing to reflash to an other version. How can I recuperate my PPC?
Thanks in advance
sailors_be said:
I just upgraded my QTEK 9100 with the latest RIsidoro rom and have now a 2.26 OS but...always an ipl 1.03 and a spl 1.03.0000.
The device hangs and I can't have any activsync runnuing to reflash to an other version. How can I recuperate my PPC?
Thanks in advance
Click to expand...
Click to collapse
To get you started have a look at these threads:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
http://forum.xda-developers.com/showthread.php?t=263116
http://forum.xda-developers.com/showthread.php?t=282498
http://forum.xda-developers.com/showthread.php?t=284292
More info required.
When having problems with Rom Upgrades you really need to provide as much information as possible about your situation.
Please state the following:
What Rom did you have prior to upgrading, include IPL/SPL numbers.
Do you know if your device is G3 or G4 flash chip?
Is your device CID Unlocked?
Have your read (thoroughly) the instructions provided for the Rom you attempted to upgrade?
My initial guess would be that the Rom you flashed doesn't include IPL/SPL (as Risidoro clearly states in the Original Post (http://forum.xda-developers.com/showthread.php?t=276700)
In this case, you need to flash one of the Operator provided AKU 2.x Roms to get your IPL/SPL up to 2.x BEFORE you flash Risidoro's Rom to your device.
Thank you for you reaction
Before flashing I had following situation
IPL 1.03
SPL 1.03.0000
GSM 1.410.0
OS 1.37.10
I didn't saw the thread wher it said that the isodoro flash wasn't a complete one. So I upgraded the device with this rom on the above config
After flashing with Isodoro I have same IPL and SPL no GSM anymore and OS 2.26...
I have no USB connection anymore, I supose I can not flash anymore. The device is extremely slow. The only rescue I see is eventualy to flash the device again with the mini SD.
Before I started the first flash I did a CID unlock. Actualy i don't now if it is locked again.
If tou need more info don't hesitate and thanks for helping.
I'm going to give you some general info but you will have to do your own leg work to put this together.
The Wizard Wiki will contain some of the information you need:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
Also see the stickied posts at the beginning of the Wizard upgrading forum.
I am assuming that your device is not properly CID Unlocked (although it may be doing it again will not harm your device).
First you will need to download an Operator Rom, I would suggest this one:
ftp://xda:[email protected]_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
as it is an official Qtek AKU 1.x Rom.
Second place your Device into Bootloader Mode (search on it) and run the update that you downloaded.
At this point you are pretty close to where you were when you started.
Now, CID Unlock your Phone! Use this thread:
http://forum.xda-developers.com/showthread.php?t=249474
If you have followed the instructions and everything went okay then you can now flash any of the Roms you (except one that are marked as G4 only since you appear to have a G3 Device).
sailors_be said:
Thank you for you reaction
Before flashing I had following situation
IPL 1.03
SPL 1.03.0000
GSM 1.410.0
OS 1.37.10
I didn't saw the thread wher it said that the isodoro flash wasn't a complete one. So I upgraded the device with this rom on the above config
After flashing with Isodoro I have same IPL and SPL no GSM anymore and OS 2.26...
I have no USB connection anymore, I supose I can not flash anymore. The device is extremely slow. The only rescue I see is eventualy to flash the device again with the mini SD.
Before I started the first flash I did a CID unlock. Actualy i don't now if it is locked again.
If tou need more info don't hesitate and thanks for helping.
Click to expand...
Click to collapse
Looks like you flashed a 2.xx rom with no bootloader into a 1.xx system.
First try a full 2.xx rom from a carrier (cingular 2.25 comes to mind) then reflash the rom you want. Be careful playing with the phone in the current state as the battery will drain and not re-charge. I had to have a friend charge my battery for me when I did this same thing.
many thanks
I followed the procedure you give and recuperated my phone.
Thanks a lot for the assistance.
Merry christmas and happy new year
Jean-Michel
Hi,
I accidentally flashed a not CID unlocked wizard with Black Diamond rom using a ShellTool - now it loads only till windows splash screen!
It is G3 device - it allows to flash Buton rom, also MiniSrom and others - process bar goes to 100% but windows doesn't boot anyway!
What options do I have?
PS. I guess I'm one of the guy who have bricked the most devices ever - this one, 3x HTC Tytn, S200, etc.
Need QTEK 9100 German Rom - the wiki links are dead!
Can anybody please advise where to look for Qtek 9100 german rom?!!!
It is G3 device - it allows to flash Buton rom, also MiniSrom and others - process bar goes to 100% but windows doesn't boot anyway!
What options do I have?
Click to expand...
Click to collapse
Suche hilft wie immer weiter
Es gibt bereits einige Threads zum Thema!
Have a look for the SD Card Backup method - see also in the wiki for reference/link.
hi, thanks for the replay!
How does the SD card method is supposed to work? Do I need a backup of the old rom? I don't have one!
The phone is NOT cid unlcoked!
After a while playing with the Wizards I have found some things - I got 4 wizards by now - and I have managed to brick 2 of them.
First thing to recommend to all - if your Wizard is running and everything is fine - then don't upgrade - you don't need that brick. Trough if you try to upgrade and you can't get from wm5 to wm6 - then probably you should stop trying unless you want to brick your device totally!!!!
Now I have one Wizard G3 probaby not CID unlocked with IPL 1.01 / SPL 1.03 and different OS versions - I can flash button Rom, Wizard Love etc. but nothing changes, just the version of the OS. I have no GSM and the IPL stays 0.01.
The second one - seems to be CID unlocked - allows to flash any rom, IPL changes, SPL stays at 3.08 - can't downgrade, OS changes - can't boot!
I can flash these units forever, I can change bootscreens - but I can't get back to windows!
This happened when I tried to use ShellTool to flash WM6 on my Wizards - don't do that!!!!
Can anybody tell me why I'm not able to boot OS if I have the Wizard Love rom, button rom and other full working roms on my wizards?
Thanks!
PS. I'm starting to consider to donate a few devices to someone who could try to solve this - I could donate: 3 HTC Tytn, 2 Wizards, 2 Prophets, 2 Alpine etc. - is anybody interested?
karlux - I'd be willing to take a crack at the devices you have and get some good documentation going for everyone. I have successfully revived Wizards, Apache, Wallaby, and the Hurricane so far.
PM/Email me if you want my address to send the victims ...er ... I mean "patients".
donate? how about sending one my way?
karlux said:
After a while playing with the Wizards I have found some things - I got 4 wizards by now - and I have managed to brick 2 of them.
First thing to recommend to all - if your Wizard is running and everything is fine - then don't upgrade - you don't need that brick. Trough if you try to upgrade and you can't get from wm5 to wm6 - then probably you should stop trying unless you want to brick your device totally!!!!
Now I have one Wizard G3 probaby not CID unlocked with IPL 1.01 / SPL 1.03 and different OS versions - I can flash button Rom, Wizard Love etc. but nothing changes, just the version of the OS. I have no GSM and the IPL stays 0.01.
The second one - seems to be CID unlocked - allows to flash any rom, IPL changes, SPL stays at 3.08 - can't downgrade, OS changes - can't boot!
I can flash these units forever, I can change bootscreens - but I can't get back to windows!
This happened when I tried to use ShellTool to flash WM6 on my Wizards - don't do that!!!!
Can anybody tell me why I'm not able to boot OS if I have the Wizard Love rom, button rom and other full working roms on my wizards?
Thanks!
PS. I'm starting to consider to donate a few devices to someone who could try to solve this - I could donate: 3 HTC Tytn, 2 Wizards, 2 Prophets, 2 Alpine etc. - is anybody interested?
Click to expand...
Click to collapse
How come you have that many devices ? What's your job ?
Your "dead" wizard is not dead. Only stuck. Get it into bootloader and re-flash .
karlux said:
After a while playing with the Wizards I have found some things - I got 4 wizards by now - and I have managed to brick 2 of them.
First thing to recommend to all - if your Wizard is running and everything is fine - then don't upgrade - you don't need that brick. Trough if you try to upgrade and you can't get from wm5 to wm6 - then probably you should stop trying unless you want to brick your device totally!!!!
Now I have one Wizard G3 probaby not CID unlocked with IPL 1.01 / SPL 1.03 and different OS versions - I can flash button Rom, Wizard Love etc. but nothing changes, just the version of the OS. I have no GSM and the IPL stays 0.01.
The second one - seems to be CID unlocked - allows to flash any rom, IPL changes, SPL stays at 3.08 - can't downgrade, OS changes - can't boot!
I can flash these units forever, I can change bootscreens - but I can't get back to windows!
This happened when I tried to use ShellTool to flash WM6 on my Wizards - don't do that!!!!
Can anybody tell me why I'm not able to boot OS if I have the Wizard Love rom, button rom and other full working roms on my wizards?
Thanks!
PS. I'm starting to consider to donate a few devices to someone who could try to solve this - I could donate: 3 HTC Tytn, 2 Wizards, 2 Prophets, 2 Alpine etc. - is anybody interested?
Click to expand...
Click to collapse
Shelltool isn't dangerous if you use it properly, meaning you can't flash WM6 if the IPL/SPl are still in 1.xx
To use the SD card method and the phone is CID locked then i recommend using imeicheck's tool to CID unlock (must pay) and then try that method.
As for the donation, i wouldn't mind geeting a Prophet as they are related to the Wizard and in case it could be recovered i could try to make a similar tool to WST: the Prophet Service Tool
let me know if you'd like PM or other means of contact...
cheers
sorry-thread hijacking-
I have a similar problem, i (thought) i had CID unlocked my wizard, followed all the instructions, about reflashing the rom's went to 1.05 the to 2.26 & then IPL & SPL to 3.08 in an attempt to flash WM6..
all went well until the last step & it got to 99% of flashing WM6 & came up with a communication error (battery is fully charged!)
Now im stuck in bootloader, & can't re flash any other roms, tried the wizard with love & 1.05 again ...noting doing... have i made a complete brick ??
HELP!!!!!!!
edit, just tried with the O2 offical upgrade...it started to load on but came up with Error 296 Upgrade Only, the NBF file could not be used...
TRY THIS .... I just recovered from a similar stuck in BootLoader issue.
Steps to recovery:
1. Fully charge your phone (VIA Power Cord ... NOT USB)
2. Get the phone to bootloader (three color mode) - by soft resetting and holding the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Download your providers ROM (The "real" rom provided by Cingular/ATT). You can get the one for the 8125 from HTCAmerica here: http://www.htcamerica.net/support/8125/software-downloads.html
5. Stop ActiveSync (from Task Manager)
6. Run the program downloaded in step 4. This will reflash your phone with the ROM. This seems to be the ONLY WAY possible to reload a ROM from BootLoader.
Enjoy!
Thanks, i;ve tried that with this software & the o2 software....i get the same error message both times...
Error296 UPGRADE ONLY,
This NBF File cannot be used on you PDA Phone,
Please get a newer NBF file.
WTF is a NBF file, where do i get a newer one from & how do i get it on the device!!!
thanks
Zpyro said:
TRY THIS .... I just recovered from a similar stuck in BootLoader issue.
Steps to recovery:
1. Fully charge your phone (VIA Power Cord ... NOT USB)
2. Get the phone to bootloader (three color mode) - by soft resetting and holding the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Download your providers ROM (The "real" rom provided by Cingular/ATT). You can get the one for the 8125 from HTCAmerica here: http://www.htcamerica.net/support/8125/software-downloads.html
5. Stop ActiveSync (from Task Manager)
6. Run the program downloaded in step 4. This will reflash your phone with the ROM. This seems to be the ONLY WAY possible to reload a ROM from BootLoader.
Enjoy!
Click to expand...
Click to collapse
What is the make/model of your phone?
A nbf file is the file that gets flashed onto the phone (nk.nbf)
it was an xda mini s....i tried loading WM6 & came unstuck.....
huhu
karlux said:
Hi,
I accidentally flashed a not CID unlocked wizard with Black Diamond rom using a ShellTool - now it loads only till windows splash screen!
It is G3 device - it allows to flash Buton rom, also MiniSrom and others - process bar goes to 100% but windows doesn't boot anyway!
What options do I have?
PS. I guess I'm one of the guy who have bricked the most devices ever - this one, 3x HTC Tytn, S200, etc.
Click to expand...
Click to collapse
me too....!
markm2 said:
Thanks, i;ve tried that with this software & the o2 software....i get the same error message both times...
Error296 UPGRADE ONLY,
This NBF File cannot be used on you PDA Phone,
Please get a newer NBF file.
WTF is a NBF file, where do i get a newer one from & how do i get it on the device!!!
thanks
Click to expand...
Click to collapse
Hey!
I believe,as u have mentioned in ur earlier post that u have upgraded to ipl/spl 3.08,therefore all the official roms r not flashing.Well its not necessary to upgrade to ipl/spl 3.08 to go for wm6.All the experts & cooks in all their threads have mentioned to upgrade to ipl/spl 2.26 to have a stable/strong working plateform, so now I wud suggest u to plz try to flash Buttons's rom 1.05 and get back to ipl/spl 1.05 than onward upgrade to ipl/spl 2.26 by flashing t_mobile 2.26.
If u r able to get back to ipl/spl 1.05,than again use lokiwiz to confirm CID unlock,hope this works out. U can also use the latest WST tool by mestrini to check the status of ur wizzard as if its cid locked or unlocked.it can also be used to unlock cid,goodluck
zabardast_1 said:
Hey!
I believe,as u have mentioned in ur earlier post that u have upgraded to ipl/spl 3.08,therefore all the official roms r not flashing.Well its not necessary to upgrade to ipl/spl 3.08 to go for wm6.All the experts & cooks in all their threads have mentioned to upgrade to ipl/spl 2.26 to have a stable/strong working plateform, so now I wud suggest u to plz try to flash Buttons's rom 1.05 and get back to ipl/spl 1.05 than onward upgrade to ipl/spl 2.26 by flashing t_mobile 2.26.
If u r able to get back to ipl/spl 1.05,than again use lokiwiz to confirm CID unlock,hope this works out. U can also use the latest WST tool by mestrini to check the status of ur wizzard as if its cid locked or unlocked.it can also be used to unlock cid,goodluck
Click to expand...
Click to collapse
I just want to add that you MUST stop at 2.xx bootloader when downgrading from 3.08 to 1.xx, otherwise you might end up with a 'locked' SPL in 3.08
you need donate the device ....
I just want to add that you MUST stop at 2.xx bootloader when downgrading from 3.08 to 1.xx, otherwise you might end up with a 'locked' SPL in 3.08
YUP!!
Thanks Mestrini
very wise & valuable advise
Btw, very valuable tool it is WST TOOL,made our lives soooo simple
zabardast_1 said:
I just want to add that you MUST stop at 2.xx bootloader when downgrading from 3.08 to 1.xx, otherwise you might end up with a 'locked' SPL in 3.08
YUP!!
Thanks Mestrini
very wise & valuable advise
Btw, very valuable tool it is WST TOOL,made our lives soooo simple
Click to expand...
Click to collapse
Tx m8, that's why i made it and i'm glad you like it.
Needed
1.an BREEZE device[The phone must be able to enter bootloader (3color screen)]
2.TerraTermPro http://rapidshare.de/files/39206549/TeraTermPro.rar.html
3.An rom matching to your device
GUIDE
1.Disable active sync - uncheck
file->connection settings->allow usb connection
2.Put the phone in bootloader mode
power the phone pressing power and camera keys
read and note all displayed info
3.Launch TerraTermPro on the pc
un the connection window check serial and choose USB
in the new open window type
info 2
and note the information
RIGHT - HTCSQTEK_A07„§m»HTCE
WRONG - HTCSF kEØ(HTCE
close terra term
4.Figure out wich rom you need
till now i have roms for
Russian Rom
QTEK_A07
HTC__A07
http://rapidshare.com/files/109782599/RUU_BREE100_1.34.261.1_1.38.00.10_HTCRUS_SHIP.rar.html
WWE Rom (QTEK,HTC,Dopod,OCH)
QTEK_Z12
HTC__Z12
http://rapidshare.de/files/39206931/RUU_MTeoR_1.34.251.1_1.38.00.10_HTCEUR_SHIP.rar.html
DOPOD001 - Chinese Rom
http://www.megaupload.com/se/?d=YD49L7JD
5.
Flash the rom corresponding to your CID
6.
Boot the phone and application unlock it
7.
Run SSPL and UPGRADE to 6.1 rom and latest radio version
8.
Save the rom that saved you for latter - it colud help you again
IF YOU CANT FIND THE CID AND ROM HERE WAIT TILL SOMEBODY POSTS IT.
IN CASE OF "HTCSF kEØ(HTCE" IN TERRATERM IS VERY HARD TO REPAIR DUE TO DAMAGED BOOTLOADER
you can repair it using this guide
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
wich requires some advanced skills
OTHER ROMS - wich i dont have
i_mate_SP_JAS_1.15.301.0.exe
RUU_BREE100_1.15.71.6_1.06.00.00_OCH_Ship.exe
ruu_bree100_1.15.707.3_dopodwwe_ship.exe
ruu_bree100_1.15.709.3_dopodcht_ship.exe
Please help me to improve this list sending me CID's and ROM's
this is what i get
iinfo 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
what do you mean by very hard to repair? it's impossible?
this is the ROM i flashed back to my phone (although the flashing is 100% completed successfully, it is still stuck at 2nd boot WM logo screen)
RUU_BREE100_1.15.707.3_DopodWWE_SHIP.exe
i just uploaded th dopod rom in case anyone needs it
http://rapidshare.com/files/109798242/RUU_BREE100_1.15.707.3_DopodWWE_SHIP.exe
alexnvidia said:
this is what i get
iinfo 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
what do you mean by very hard to repair? it's impossible?
this is the ROM i flashed back to my phone (although the flashing is 100% completed successfully, it is still stuck at 2nd boot WM logo screen)
RUU_BREE100_1.15.707.3_DopodWWE_SHIP.exe
i just uploaded th dopod rom in case anyone needs it
http://rapidshare.com/files/109798242/RUU_BREE100_1.15.707.3_DopodWWE_SHIP.exe
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
use this wisely
jerpelea said:
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
use this wisely
Click to expand...
Click to collapse
how do i put breeze into KITL Mode? is it the camera+power button tri-colour thing?
reads what stands on hermes wiki page...
maybe i'm talking ****, but i think too enter kitl mode you must have a running windows mobile...
just find the kitl mode "reset" on hermes its "now for your Hermes: hold the Comm button and soft reset and wait for the KITL dialog to appear, now is the CRITICALLY missed step; you need to press the small OK button on the LEFT of the device to activate USB KITL. "
futureshock said:
reads what stands on hermes wiki page...
maybe i'm talking ****, but i think too enter kitl mode you must have a running windows mobile...
just find the kitl mode "reset" on hermes its "now for your Hermes: hold the Comm button and soft reset and wait for the KITL dialog to appear, now is the CRITICALLY missed step; you need to press the small OK button on the LEFT of the device to activate USB KITL. "
Click to expand...
Click to collapse
exactly.. that's the worrying part for me now. i have no idea how do i enter KITL mode in breeze. any ideas?
alexnvidia said:
exactly.. that's the worrying part for me now. i have no idea how do i enter KITL mode in breeze. any ideas?
Click to expand...
Click to collapse
no
i did this on my hermes once
having the same problem as you have on breeze
hermes and breeze share the same platform
we have to find the answer
How did you manage to screw the bootloader
can you provide us a list of what you have flashed on the device?
what is the brand,model(herm 100/herm160),vendor,region of your device
i am triing to figure an solution
all others upgraded succesfully to 1.34 rus getting HTC__A07 CID and after that radio and wm 6.1
what did you do ?
BR
jerpelea said:
no
i did this on my hermes once
having the same problem as you have on breeze
hermes and breeze share the same platform
we have to find the answer
How did you manage to screw the bootloader
can you provide us a list of what you have flashed on the device?
what is the brand,model(herm 100/herm160),vendor,region of your device
i am triing to figure an solution
all others upgraded succesfully to 1.34 rus getting HTC__A07 CID and after that radio and wm 6.1
what did you do ?
BR
Click to expand...
Click to collapse
ok. i have no idea hoiw i screwed up the bootloader too. this is what happens.
i have a dopod 595 device, the breeze with forward facing video call camera, so it's a breeze 160. it's a Qtek_Z12 device and the region is WWE.
before you posted the new herm radio, i successfully updated to your beta WM6.1 using your unlocking SSPL guide. i never upgraded the SPL though. the original phone's IPL and SPL are IPL0.9 and SPL2.05.
so what i did was first to upgrade to the latest WWE 1.38 using your unlocking/SSPL guide, then upgrade to your WM6.1 beta. everything worked fine. i do notice that only the IPL has been upgraded, and the SPL remains 2.05. so i ignored it.
it was when you posted the new herm radio upgrade i then decided to update my SPL as well. so as per your instructions in the unlocking guide, i first unlock the phone (WM6.1), perform the SPL1.09 update. it was successful. phone booted up just fine. then i run the official WWE 1.38 (the same one i used before upgrading to WM6.1 beta). and this time i did not run the DES soft SPL ( i must have forgotten and thought the phone is unlocked anyway). the RUU started, and the flashing failed at 1% giving an invalid vendor ID error message (as expected because my phone is not superCID and i forgot to run DES SSPL). after this little incident, i canot boot my phone anymore.
so i tried to recover it using various methods. and i successfully flashed back the original WM5 WWE dopod 595 ROM by using the latest RUU from 1.38 with old WWE WM5 nbh. the flashing completed 100%, the phone reboots, and still stuck at the second boot screen. IPL has been downgraded to 0.9 and SPL remains 1.09.
what should i do now? i really appreciate you/anyone taking the time to look into this issue. thank you.
have you tryed a hardreset??
and did you cid is now screwed up??
alexnvidia said:
ok. i have no idea hoiw i screwed up the bootloader too. this is what happens.
i have a dopod 595 device, the breeze with forward facing video call camera, so it's a breeze 160. it's a Qtek_Z12 device and the region is WWE.
before you posted the new herm radio, i successfully updated to your beta WM6.1 using your unlocking SSPL guide. i never upgraded the SPL though. the original phone's IPL and SPL are IPL0.9 and SPL2.05.
so what i did was first to upgrade to the latest WWE 1.38 using your unlocking/SSPL guide, then upgrade to your WM6.1 beta. everything worked fine. i do notice that only the IPL has been upgraded, and the SPL remains 2.05. so i ignored it.
it was when you posted the new herm radio upgrade i then decided to update my SPL as well. so as per your instructions in the unlocking guide, i first unlock the phone (WM6.1), perform the SPL1.09 update. it was successful. phone booted up just fine.
Click to expand...
Click to collapse
here you needed the sspl to flash official rom
i think that i have this im my tread
then i run the official WWE 1.38 (the same one i used before upgrading to WM6.1 beta). and this time i did not run the DES soft SPL ( i must have forgotten and thought the phone is unlocked anyway). the RUU started, and the flashing failed at 1% giving an invalid vendor ID error message (as expected because my phone is not superCID and i forgot to run DES SSPL). after this little incident, i canot boot my phone anymore.
Click to expand...
Click to collapse
here you screwed the botloader
now you have an older ipl that does not know how to load the new SPL
so i tried to recover it using various methods. and i successfully flashed back the original WM5 WWE dopod 595 ROM by using the latest RUU from 1.38 with old WWE WM5 nbh. the flashing completed 100%, the phone reboots, and still stuck at the second boot screen. IPL has been downgraded to 0.9 and SPL remains 1.09.
what should i do now? i really appreciate you/anyone taking the time to look into this issue. thank you.
Click to expand...
Click to collapse
did you try to hard reset?
the two "-" keys and power
???
futureshock said:
have you tryed a hardreset??
and did you cid is now screwed up??
Click to expand...
Click to collapse
yes. i tried hard reset (two soft keys+power then press 0) many times. doesnt work. tried the mtty to format the phone, doesnt work.
here you screwed the botloader
now you have an older ipl that does not know how to load the new SPL
ok, firstly, when i loaded up the SPL1.09, the phone boots up fine. it only got stuck when the flashing to WWE1.38 failed. at this point i still have the new IPL.
the old IPL was flashed in during the recovery attempt when i tried to flash the old official WM5 ROM back hoping it would also downgrade the SPL, but it didnt. it only downgrade the IPL to 0.9. SPL remains 1.09
alexnvidia said:
here you screwed the botloader
now you have an older ipl that does not know how to load the new SPL
ok, firstly, when i loaded up the SPL1.09, the phone boots up fine. it only got stuck when the flashing to WWE1.38 failed. at this point i still have the new IPL.
the old IPL was flashed in during the recovery attempt when i tried to flash the old official WM5 ROM back hoping it would also downgrade the SPL, but it didnt. it only downgrade the IPL to 0.9. SPL remains 1.09
Click to expand...
Click to collapse
im my guide i wrote to use sspl
if you use sspl you finish the 1.34 upgrade from spl 1.09 and is everything fine
if not no
from here you had spl A07 so you could flash ONLY original htc Rus rom
you flashed an older ipl instead
an older ipl that does not load correctly the new spl
the spl can not be downgraded from 1.10(1.09) to 2.05
here is the problem
and as long as you dont have an rom with your CID od HARDSPL the phone can only be flashed using my hermes guide if we find the buton combination on breeze
BR
jerpelea said:
im my guide i wrote to use sspl
if you use sspl you finish the 1.34 upgrade from spl 1.09 and is everything fine
if not no
from here you had spl A07 so you could flash ONLY original htc Rus rom
you flashed an older ipl instead
an older ipl that does not load correctly the new spl
the spl can not be downgraded from 1.10(1.09) to 2.05
here is the problem
and as long as you dont have an rom with your CID od HARDSPL the phone can only be flashed using my hermes guide if we find the buton combination on breeze
BR
Click to expand...
Click to collapse
so what you mean now is my IPL 0.9 is WWE and my SPL is 1.09 Qtek A07? and this is causing the problem? so can i flash the IPL on the phone to the lastest one in tri-colour mode so that it can read the 1.09 SPL? can u please provide me with the SPL upgrade file and utility?
any solutions so far? guys?
alexnvidia said:
so what you mean now is my IPL 0.9 is WWE and my SPL is 1.09 Qtek A07? and this is causing the problem? so can i flash the IPL on the phone to the lastest one in tri-colour mode so that it can read the 1.09 SPL? can u please provide me with the SPL upgrade file and utility?
Click to expand...
Click to collapse
no
your problem is that ipl 0.9 cant load spl 1.09
the memory load address differs and it cant load it correctly
i havent found an solution
you need an valid spl loaded to flash
you can try all the original roms (don't edit them)
and see if any one of them tries to push ipl and spl before actualy flashing
also try the official 1.09 spl flash
BR
nowaday, I found this thread useful. thanks
what happened? I was upgrading to futureshock ver. 4 and during phone'd swiched off ... I was looking for original ROM posted here in Breeze forum, but I didn't find it ... after read this 1st post I recoginze, that Czech ROM official is RUS .. that news for me (of course good ).
KITL Hermes
I had ROM 6.1 from Futureshock...still problem with radio (my phone couldn´t accessble but signal icon shows good signal, radio version 1.38.0000), so I decided flash some original ROM. Aftet that my booting stuck on HTC logo or Windows Mobile logo. So I can´t use normal way to flashing. Only from SD card or first turn on phone to boot loader mode and than attach usb cable and start flashing. From SD card (where is renamed ROM BREEIMG.NBH) after enter into bootloader mode start loading and than just turn to trhreecolour menu where is BREE100 - IPL-0.90 and BREE100-1.10.0000 and doesn´t want continue. If I flash ROM via USB cable (first go to threecolour mode, than attach cable) than run ROMUpdateUtility.exe and flash process is being started but always die on 2%, than autoreboot and again stuck on HTC logo.
I tried hard reset, I tried lot of ROM versions HTCRUS, HTCEUR, QTEKEUR, FUTURESHOCK but still same problem during flash ROM stop on 2%...
I tried KITL Hermes unbrick method but same problems like had others on this forum, I don´t know how to turn my MTeoR to KITL debug mode because device is different like Hermes so key combination doesn´t matches with Breeze. MTTY - info 2 command show me CID: waiting interpreter failed...
Any ideas how to back life to my MTeoR?
Can I use application like MTTY? Could me help this program?
Thanks for any help...
DOPOD601
which RUS update rom can i use?thanks
HTCSDOPOD601in眘HTCE
which rom?
can somebody email to : [email protected] or [email protected] ?
thank you
Greetings all.
My Kjam G4 hangs on 2nd splash screen. After reading hundreds of posts over the last few days,
I am still not clear on my next step, without making phone any worse.
History.
Phone has HARD SPL.
ipl 2.21.0001
spl 2.21.olip
Used Molski wm6 rom last month or so. Flashed WizFlo 20273 v6.1.1.3 last week. Completed ok .But now hangs. Flashed wizard love and other roms via bootloader. completes ok. Still hangs on splash.
Hard rest results in "format is failed"
"r2sd all" completes ok. Pressing dial button does not start restore.
I have previous backup of different components using wst tool and also KJam official rom.
Questions:
1. With HARDSPL , is the phone CID unlocked ?
2. With the SD restore not working , does this imply phone still CID locked ?
3. Is there an official Kjam rom without ipl/spl ?
4. Hard reset is supposed to format "UA". Is it possible to flash a backup of UA (as made by wst )to the phone ?
Thanks in advance , and forgive me if I have not followed protocol this forum.
logank said:
Greetings all.
My Kjam G4 hangs on 2nd splash screen. After reading hundreds of posts over the last few days,
I am still not clear on my next step, without making phone any worse.
History.
Phone has HARD SPL.
ipl 2.21.0001
spl 2.21.olip
Used Molski wm6 rom last month or so. Flashed WizFlo 20273 v6.1.1.3 last week. Completed ok .But now hangs. Flashed wizard love and other roms via bootloader. completes ok. Still hangs on splash.
Hard rest results in "format is failed"
"r2sd all" completes ok. Pressing dial button does not start restore.
I have previous backup of different components using wst tool and also KJam official rom.
Questions:
1. With HARDSPL , is the phone CID unlocked ?
2. With the SD restore not working , does this imply phone still CID locked ?
3. Is there an official Kjam rom without ipl/spl ?
4. Hard reset is supposed to format "UA". Is it possible to flash a backup of UA (as made by wst )to the phone ?
Thanks in advance , and forgive me if I have not followed protocol this forum.
Click to expand...
Click to collapse
1.With HardSPL, Nopes! phone is not actually permanently CID unlocked like G3 device,Its semi-permanent CID unlocked by flashing patched IPL/SPL,thus tricking the Bootloaders in thinking its CID unlocked,whereas,its not actually CID unlocked.A G4 device can not be permanently CID unlocked (SuperCID),its just made to trick.
2. As the phone has HardSPL,Sdcard backup through mtty r2sd all command is not possible,coz the Bootloaders are patched,not original official.To carry out sdcard method,you'll have to first remove HardSPL,flash back the original official Bootloaders(IPL/SPL),only then its possible to perform sdcard method.
3. Nopes! there's no k-jam official rom without IPL/SPL,what you can do is to extract k-jam rom and remove the Bootloaders (IPL/SPL),repack the rom and can flash it,but without official IPL/SPL.The only way to flash the official k-jam rom is to first remove HardSPL,reflash original official k-jam Bootloaders and then flash official stock rom.
4.UA back up made by WST is again only possible to flash after removal of HardSPL.
5. Wizard_love or any other official rom with IPL/SPL in it will not flash,unless HardSPL is removed,infact,it might 'Brick' the phone,so avoid flashing any rom with IPL/SPL in it.
Try to flash any custom build wm6 or wm6.1 in Bootloaders and remove,if any, Sdcard inserted in the phone before flashing a rom and remember to have a fully charged battery before flashing.
BTW, send a PM to 'mestrini' the inventer of this magical tool WST_4.2.2,may be he can advise you better on this problem of 'Format is Failed'
zabardast_1 said:
1.With HardSPL, Nopes! phone is not actually permanently CID unlocked like G3 device,Its semi-permanent CID unlocked by flashing patched IPL/SPL,thus tricking the Bootloaders in thinking its CID unlocked,whereas,its not actually CID unlocked.A G4 device can not be permanently CID unlocked (SuperCID),its just made to trick.
2. As the phone has HardSPL,Sdcard backup through mtty r2sd all command is not possible,coz the Bootloaders are patched,not original official.To carry out sdcard method,you'll have to first remove HardSPL,flash back the original official Bootloaders(IPL/SPL),only then its possible to perform sdcard method.
3. Nopes! there's no k-jam official rom without IPL/SPL,what you can do is to extract k-jam rom and remove the Bootloaders (IPL/SPL),repack the rom and can flash it,but without official IPL/SPL.The only way to flash the official k-jam rom is to first remove HardSPL,reflash original official k-jam Bootloaders and then flash official stock rom.
4.UA back up made by WST is again only possible to flash after removal of HardSPL.
5. Wizard_love or any other official rom with IPL/SPL in it will not flash,unless HardSPL is removed,infact,it might 'Brick' the phone,so avoid flashing any rom with IPL/SPL in it.
Try to flash any custom build wm6 or wm6.1 in Bootloaders and remove,if any, Sdcard inserted in the phone before flashing a rom and remember to have a fully charged battery before flashing.
BTW, send a PM to 'mestrini' the inventer of this magical tool WST_4.2.2,may be he can advise you better on this problem of 'Format is Failed'
Click to expand...
Click to collapse
Thank you , zabardast_1 for your prompt and detailed response. I will PM "mestrini".
BTW, Is there any way to remove HardSPL without activesync ?
And thanks once again.
HARDSPL
How do i carry out HARDSPL on the phone which cannot boot becuase i am not able to connect using the microsft Activesync. Please assist my phone is a G4 and CID locked.
Hamid
Hi Everyone
My Kjam is also stuck on 2nd screen and i can not got any idea that how and what can I perform task to get its back original form. I read most of forums but still i am blank. please guide me what i do..........?
thanks in advance
Hi,
If your device is a G4 try this:
1- Download Wizard Love ROM.
2- Download ROMUpdate Utility V2.5.2 .
3- Try to enter to bootloader mode. The bootloader can be entered by holding the "Camera" button while resetting.
4- Copy the Wizard Love ROM's nk.'nbf' file to the ROMUpdate Utility V2.5.2 .
5- Run the 'romupdateutility.exe' and then follow the instructions of the application.
Best Regards.
Hi md_bluelily
Thanks buddy for your precious time.
1- Download Wizard Love ROM.
2- Download ROMUpdate Utility V2.5.2 .
Dear i try to find these, but there are lot of links i found
So please send me a suitable link of it. specialy Wizard Love Rom for IMATE KJAM G4 CID LOCKED DEVICE
thanks regards
Hamid
Here you can download Wizard Love ROM (G4 Only I think).
And here you can download ROMUpdate Utility V2.5.2 from attachment.
I was unable to get my PPC repaired myself so i took this paid favour from market with original and official WM5, details
IPL 2.26.0001
SPL 2.26.0001
OS 2.16.9.1
GSM 02.07.10
I was unable to use utilities and ROM provided by you cuz the PPC was not with me at that time. The guy who repaired my PPC said he was unable to install WM6 on my mobile. Now my mobile has following characteristics got using
Wizard Service Tool v4.2.2
29/09/09 18:59:40
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356xxxxxxxxxxxx
=> Bootloaders:
IPL: 2.26.0001 (G4 device)
SPL: 2.26.0001 (G4 device)
Built on Jun 7 2006 at 19:17:57
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14847.2.0.0)
ROM: 2.16
Registry AKU: .2.0.0
Radio: 02.07.1ò
Protocol: P413.1.03
=>Extended_ROM:
Version: 2.16.9.101
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
4ea09fda - 9.99M (0x9fd800)
8ea9e13a - 43.24M (0x2b3e000)
2fb25f92 - 50.95M (0x32f4000)
8fb25f3e - 2.94M (0x2f0000)
8fb25fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
000000009b1c01023b3b03ccxxxxxxxx
Key Index: 60
All Done.