changing hdd - Shift Development

sorry but, changing the hddyou will lose wm/vista recovery partition.
if i put a newer hdd how i can install vista and wm side?

pitt1983 said:
sorry but, changing the hddyou will lose wm/vista recovery partition.
if i put a newer hdd how i can install vista and wm side?
Click to expand...
Click to collapse
There is already a thread about upgrading the hard drive, a new thread wasn't needed.
There is also a thread (from Pof) about using Linux to access, and presumably copy, the recovery partition.

Pantaloonie said:
There is already a thread about upgrading the hard drive, a new thread wasn't needed.
There is also a thread (from Pof) about using Linux to access, and presumably copy, the recovery partition.
Click to expand...
Click to collapse
The recovery partition are in flash rom.. if you change the hd, at the boot press fn+f3 and you recover your vista in new hd.

killer_t said:
The recovery partition are in flash rom.. if you change the hd, at the boot press fn+f3 and you recover your vista in new hd.
Click to expand...
Click to collapse
fiigo, non sapevo! quindi noin occupa spazio su hdd.
cool, so recovery partition is not on hdd.
good.
thx for answer.
I suppose to close the tread.

killer_t said:
The recovery partition are in flash rom.. if you change the hd, at the boot press fn+f3 and you recover your vista in new hd.
Click to expand...
Click to collapse
I believe this statement is wrong - the recovery partition is just that, a hidden partition on the hard drive. But I'd be just as happy if someone proved you to be correct.
The Snapvue recovery files will be in flash, however.

Pantaloonie said:
I believe this statement is wrong - the recovery partition is just that, a hidden partition on the hard drive. But I'd be just as happy if someone proved you to be correct.
The Snapvue recovery files will be in flash, however.
Click to expand...
Click to collapse
so, you are saying that recovery partition is on hdd?
and if we change hdd how transfer or use recovery partion.

Become a linux expert. Or wait for Pof and/or the development team to figure it out.

i think that i must wait for a newer and compatible hdd..
then i became a linux expert

To keep everything from the original HDD
Hi,
Try to Proceed like a regular HDD, Use Ghost or other aplication to image the original HDD and later, dump the image in a new (and bigger one). So you preserve all. Thats all.
Best regards from ESPAÑA!
Armas.
Zapatero Vete Ya!

It's Armitas the Necromancer! Resurrection!

foxmeister said:
It's Armitas the Necromancer! Resurrection!
Click to expand...
Click to collapse
JAJAJA; Ghost never Die!
Por cierto: I have done my own backup of the full HD in a Image, so I have the restore partition, and my vista configured as I want (software included) to recover....And till now help me 2 times!. I recomend that. Is Easier than any Linux and give a LOT LESS work.
Armas.
Best regards, From ESPAÑA!
PD: I forgott: In Spain is Easy to find a bigger HDD, a 120HHD C&P:
Toshiba MK1214GAH - Disco duro - 120 GB - interno - 1.8" - ATA-100 - 4200 rpm - búfer: 8 MB
Toshiba Storage Device Division continúa ampliando su familia de unidades de disco duro líder del mercado presentando la MK1214GAH. Esta unidad de doble placa de 120 GB ha sido diseñada para portátiles de alto rendimiento y para dispositivos electrónicos que necesitan mucho espacio de almacenamiento. Ofrece una densidad de área de 295,1 Mbits/mm², la mayor que ofrece Toshiba hasta la fecha para unidades de disco duro de 1,8 para portátiles. Toshiba ha eliminado las barreras técnicas inherentes a la compresión de más datos en una unidad de disco duro. Puede almacenar hasta 30.0000 archivos MP3 de alta calidad o más de 150 horas de vídeo MPEG-4 con calidad DVD. Además del aumento de capacidad, este disco duro de 120 GB funciona a 4.200 rpm.La unidad emplea la nueva interfaz ATA-7 y consigue una velocidad de transferencia de datos de 100 MB/s. Además, gracias al uso de un nuevo conector Low Insertion Force (LIF), es 7 milímetros más fina que las unidades normales de 1,8 pulgadas y ofrece a los fabricantes la posibilidad de producir productos aún más pequeños sin perder rendimiento o capacidad de almacenamiento.
Click to expand...
Click to collapse

Related

A question about MTTY

I have been trying to unbrick my 750 treo, apparently my Radio bootloader is corrupted. I have scoured this forum and the internet trying to find a solution.
I've used mtty to try to at least erase or use task 2a, but nothing happens. None of the commands seem to work. I tried the password 0000000000000000
which says its invalid.
I also tried BsaD5SeoA, and it says it passes, but rtask, erase or task 2a and lnb command don't do anything. I have tried mtty 1.11 and 1.42 and neither one will work.
Is there a special microsoft library that I need to install in order to access these commands? I am at a loss why everything I try doesn't work. There has got to be a solution for this. I've tried reflashing the ROM 10 times now, tried mtty, tried the AT&T rescue program.
Is the phone bricked beyond repair?
Any help would be appreciated
I guess it is a major brick, oh well, it'll cost me more to take it in for repair than it would to just buy another used one off eBay.
Keep it around for parts.
The Windows Mobile 6.5 made it a pretty worthwhile phone.
I'll be back...
Have you tried flashing Olipro's Hard-SPL just to see if it will work? I know for a fact his SPL will accept task 2a... task 28... etc. The OEM SPL won't accept those commands and I bet your phone is still stuck on it and that is why they won't work. How do you know that it is your radio that is corrupted and nothing else? You might be able to unbrick it through some trickery.
navenedrob said:
Have you tried flashing Olipro's Hard-SPL just to see if it will work? I know for a fact his SPL will accept task 2a... task 28... etc. The OEM SPL won't accept those commands and I bet your phone is still stuck on it and that is why they won't work. How do you know that it is your radio that is corrupted and nothing else? You might be able to unbrick it through some trickery.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=511763
Download the attachment in that post, disregard the files accept for the CHEEIMG.nbh (it is Hard-SPL 1.40). Load the NBH to your SD card and try to flash it. If you can flash it or jump through some loops and get a miracle then there is a chance to fix your phone.
Yeah, I've tried that, it just goes to 7% and then the phone reboots on its own. Also if I try to flash from the SD card it won't recognize anything but an official ROM. When I do a Mtty "checkimage" command, when it verifies the radio, it times out with 0x0 CRC.
With everything I've researched, the only thing that will repair this phone is the right security password for Mtty. So I took another route.
I just purchased a Treo with a broken screen for cheap, so I'm going to swap out the screen and start over. And am going to make sure I have Hard-SPL 1.40 on the phone this time.
Thanks for the help and all of your hard work.
We Treoites appreciate it.
Looking forward to trying the new ROM
Hola por favor necesito ayuda, tengo una treo 750 a la cual le instale una ROM de WM 6.5 q al parecer no era para mi movile, la cosa es q se me quedo con la pantalla en negro, me dijeron q con el programa MTTY.exe podia solucionarlo, pero no se como usarlo, cuando lo habro y selecciono el com 1 se abre como para escribir, pero en esa hoja no dice absolutament nada y no me deja escribir. Por favor se los ruego, ayudenme, me costo mucho conseguir este tipo de celular y ahora me paso esto y sincerament me pone demasiado mal ya q el equipo es caro. Gacias y espero una ayuda
The_hobbyt said:
Hola por favor necesito ayuda, tengo una treo 750 a la cual le instale una ROM de WM 6.5 q al parecer no era para mi movile, la cosa es q se me quedo con la pantalla en negro, me dijeron q con el programa MTTY.exe podia solucionarlo, pero no se como usarlo, cuando lo habro y selecciono el com 1 se abre como para escribir, pero en esa hoja no dice absolutament nada y no me deja escribir. Por favor se los ruego, ayudenme, me costo mucho conseguir este tipo de celular y ahora me paso esto y sincerament me pone demasiado mal ya q el equipo es caro. Gacias y espero una ayuda
Click to expand...
Click to collapse
I' m usando un traductor es esperanza de I que usted puede leer. Usted necesitará destellar con el unlocker del cheeta antes de que usted pueda utilizar mtty. Usted necesita encontrar que el puerto del USB el teléfono esté atado con a la sinc. activa de Microsoft. O el intento al reflash con ROM original 6.0 usando tarjeta del SD dio formato a la grasa 32

Overclocking optimus black whit nova v8 corrected

Pardon by the one of before I do not speak English.
Hello to all.
My problem is the following one:
I yesterday made Overclock with terminal emulator and all correct one. I put that the Overclock remembered and here I made it bad, because I remained without battery and when arriving at to house I put it to load I ignited, it and nothing, I had left pillaged. I did recovery with wipes, I returned to install everything I tried and it again but no longer there was way to obtain it. With terminal emulator I have left myself pillaged when I have introduced the frequency and tlf does a reseteo to me but without going out. if I return it to try I must clear the battery because I have left myself colgadísimo. If I do with 0.5.6beta Nova app I pass the same to me has left myself pillaged at the end of doing overclock.
Somebody knows why happens this to me?
Will have been created some file that it must erase?
Some solution?
Thank you very much, I wait for your answers. A greeting.
Spanish
Hola a todos.
Mi problema es el siguiente:
Ayer hice Overclock con terminal emulator y todo correcto.
Puse que me recordase el Overclock y aquí la cagué, porque me quedé sin batería y al llegar a casa lo puse a cargar, lo encendí y nada, se me quedaba pillado.
Hice recovery con los wipes, volví a instalar todo y lo intenté de nuevo pero ya no había manera de conseguirlo.
Con terminal emulator se me queda pillado cuando he introducido la frecuencia y el tlf me hace un reseteo pero sin apagarse. si lo vuelvo a intentar tengo que quitar la batería porque se me queda colgadísimo.
Si lo hago con Nova app 0.5.6beta me pasa lo mismo se me queda pillado al final de hacer overclock.
¿Alguién sabe por qué me ocurre ésto?
¿Se habrá creado algún archivo que tenga que borrar?
¿Alguna solución?
Muchas gracias, espero vuestras respuestas.
Un saludo.
Excuse me, but your English language is less understandable for me...
Perhaps other 43 views of this thread doesn't understand either, so no reply yet..
CMIIW
It seems to be a translation, no ?
What's the original language ?
Because neither I understand your post.
Sent from my LG-P970 using xda premium
Sobralobo said:
It seems to be a translation, no ?
What's the original language ?
Because neither I understand your post.
Click to expand...
Click to collapse
I think it's translation. If you understand, perhaps you can give solution of those problem?
redy2006 said:
Excuse me, but your English language is less understandable for me...
Perhaps other 43 views of this thread doesn't understand either, so no reply yet..
CMIIW
Click to expand...
Click to collapse
or the text is corrected or that I create.
pelucaslee said:
or the text is corrected or that I create.
Click to expand...
Click to collapse
Well, it seems I (or someone who read this thread) still don't understand your 'edited' question... I am sorry...
What is your language? Perhaps you can also write it with your own language (add your original language below your question), so other's who had same language can understand and help.
CMIIW.
redy2006 said:
Well, it seems I (or someone who read this thread) still don't understand your 'edited' question... I am sorry...
What is your language? Perhaps you can also write it with your own language (add your original language below your question), so other's who had same language can understand and help.
CMIIW.
Click to expand...
Click to collapse
Ok, posted, thanks
from what I can make out of it, it's a portugese or spanish lang (he just posted it lol)...I think he's trying to say that he overclocked his phone making it unstable (if im not wrong) and he's saying it's like a brick now and wont turn on even with plugging it in and asking if he tinkered with the wrong file or somthing?
In order to repair a faulty overclock, you have to wipe /data only, and then reflash.
When you wipe all and then reflash everything... It continues failing?
---
Para solventar un problema de overclock fallido, basta con hace un wipe de /data y luego hacer un reflash. De todas formas, teniendo en cuenta que la Nova v8 solo la hay en versión wipe, no te queda otra que reflashear todo.
Cuando haces todos los wipes y reflasheas la nova 8... continua fallando el overclock? Detallame qué wipes haces, porque debería estar todo ok.
More text in spanish than in english? It's easier to me...
Huexxx said:
In order to repair a faulty overclock, you have to wipe /data only, and then reflash.
When you wipe all and then reflash everything... It continues failing?
---
Para solventar un problema de overclock fallido, basta con hace un wipe de /data y luego hacer un reflash. De todas formas, teniendo en cuenta que la Nova v8 solo la hay en versión wipe, no te queda otra que reflashear todo.
Cuando haces todos los wipes y reflasheas la nova 8... continua fallando el overclock? Detallame qué wipes haces, porque debería estar todo ok.
More text in spanish than in english? It's easier to me...
Click to expand...
Click to collapse
Yes, I think that he only made wipe, and not flashing.
you can try to make wipe and reflash again.
Huexxx said:
In order to repair a faulty overclock, you have to wipe /data only, and then reflash.
When you wipe all and then reflash everything... It continues failing?
hago el overclock con terminal y pongo 1,1 pero se cuelga
---
Para solventar un problema de overclock fallido, basta con hace un wipe de /data y luego hacer un reflash. De todas formas, teniendo en cuenta que la Nova v8 solo la hay en versión wipe, no te queda otra que reflashear todo.
Cuando haces todos los wipes y reflasheas la nova 8... continua fallando el overclock? Detallame qué wipes haces, porque debería estar todo ok.
More text in spanish than in english? It's easier to me...
Click to expand...
Click to collapse
Sent from my LG-P970 using XDA App
hago el overclock con terminal emulator. 1,1 hago los ajustes y se me cuelga.
pelucaslee said:
hago el overclock con terminal emulator. 1,1 hago los ajustes y se me cuelga.
Click to expand...
Click to collapse
Have you wiped all and reflashed?
¿Has hecho todos los wipes y reflasheado?
Hi, I work. seem silly but the keyboard has been changed and has come to first.
certainly never been clear to me what the phone reflash.
thank you very much everyone.
hug a friend.
Sent from my LG-P970 using XDA App
nada, se me queda pillado el teléfono, se reinicia sin apagarse del todo y ya no puedo hacer overclocking, se me cuelga.
Sent from my LG-P970 using XDA App
i do a full wipe and install nova 8 and aoverclock doesnt works, frezze phone or run very slow like 200 mhz :S, nova 8 have so many issues, i think rollback to stock from LG
hice full wipe e instale y nada, si overclockeo se cuelga o corre muy lento aparte de verle muchas fallas a nova q estoy a punto de irme a la stock mas estable
Only a comment: OVERCLOCK IS NOT MANDATORY
Enjoy your stock ROM overclock.
Huexxx said:
Only a comment: OVERCLOCK IS NOT MANDATORY
Enjoy your stock ROM overclock.
Click to expand...
Click to collapse
What's actually the purpose of overclock, perhaps those people doesn't know it (yet)...
CMIIW.

[Q] Swaping SDCards

Hi, first of thanks to this community, it was a big help for mi whit my old Lg P500, now i got an Razr i, and trying to swap the internal and external sdcards like this mod, http://forum.xda-developers.com/showthread.php?t=2022727 , but i cant get it, i us this method, the Moto Tool, enable the init.d by terminal and zip, but only thing i can get its the dpi change deforming the screen, and/or a lot of things stop working, like main screen, adjustements and more.
Searching for help in the forum i find this, http://forum.xda-developers.com/showthread.php?t=2046178 , my questions are:
1.- Im from Mexico, it is safe to flash any of the boot.img in the last post?
2.- Its there another way to get swap sdcards, or something to use my 32gb sd to instal apps?
My equip is the Razr i stock rom, rooted, unlocked bootloader, thnaks.
gzki said:
Hi, first of thanks to this community, it was a big help for mi whit my old Lg P500, now i got an Razr i, and trying to swap the internal and external sdcards like this mod, http://forum.xda-developers.com/showthread.php?t=2022727 , but i cant get it, i us this method, the Moto Tool, enable the init.d by terminal and zip, but only thing i can get its the dpi change deforming the screen, and/or a lot of things stop working, like main screen, adjustements and more.
Searching for help in the forum i find this, http://forum.xda-developers.com/showthread.php?t=2046178 , my questions are:
1.- Im from Mexico, it is safe to flash any of the boot.img in the last post?
2.- Its there another way to get swap sdcards, or something to use my 32gb sd to instal apps?
My equip is the Razr i stock rom, rooted, unlocked bootloader, thnaks.
Click to expand...
Click to collapse
Que tal Gzki, le cuento que yo tengo un Moto Razr I con Rom Retail de Brazil ,Rooteado y con el bootloader desbloqueado, he intentado todos los metodos propuestos por Rickwyatt y con la App directory bind y desafortunadamente nada ha servido, si quiere intentarlo le aconsejo hacer un backup con el CWR, el flashear el Boot.img siempre me causa cierre de las apps del sistema y un cambio en el DPI de la ROM, yo me he resignado a esperar un poco si encuentra algo que le funcione me cuenta :good:
Saludo desde Colombia!
_______________________________________________________________________________________________________
Hi! Gzki, I have a Moto Razr I with Brazil Retail Rom, Rooted and unlocked bootloader, I tried all the methods proposed by Rickwyatt and App directory bind and unfortunately nothing has helped, if you want to try advise make a backup with CWR, flash the boot.img always close apps system and a change the DPI of the ROM, I have resigned myself to wait a bit if you find something that works tell me please! : good:
Greetings from Colombia!
NI hablar, solo nos queda esperar, ya me canse de seguir intentando, me llevo todo el domingo y para nada, lo mas molesto es que solamente hice el root, y el bootloader para esto. Mañana buscare otras opciones, si encuentro algo te lo comentare.
Saludos
-----------------------------------------------------------------------------------------
Well, we only have to wait, im tired from trying, it took me all Sunday and for nothing, the anoying is that i only root and unlock bootloader for this. Tomorrow will search for other options, if i find something i will tell you.
Greetings
guys, this is international forum, please post only in inglish..
Sorry but im a big noob, just want to know if it´s safe for my to flash any of the boot imges, especially the JB one, made by ryckwyatt in this post?
http://forum.xda-developers.com/showthread.php?t=2046178
Im from Mexico, Stock Rom, Unlocked Bootloader and Root
Thnxs

Delete... No interest taken

Delete...
Alex_XV6700 said:
Ok guys so I'm a complete noob in developing roms and that stuff but I managed to update the Rom made by @justinswidebody (ATTFLEXROM JB) to Kitkat D95020b stock rom.
The process is pretty simple (always keep a backup of your EFS partitions it could be by FREEDOMFLEX app or a TWRP backup of it)
1. Return to stock with the flashable zip or ZV3 TOT with LG Flash tool.
2. Root - TWRP
3. Flash Justins ATTFLEX Rom.
4. From here you just have to set up the rom, Power OFF and go to DOWNLOAD MODE.
5. Flash ATTs Stock 20b TOT with LG Flash Tool.
6. Root (ioroot didnt work for me, but I used Towelroot app ) - TWRP
7. Flash a TWRP backup of the LS995ZV7 modem (M8974A-AAAANAZM-2.0.20049)
And thats it. You got KK D95020b rom on your LS995.
Mine is unlocked for GSM and I'm using it out of the US, so someone would have to test it over there.
I will upload my TWRP "modem only " backup if anyone needs it.
Will upload screenshots in a while I'm setting it up.
P.S. I have only found that NFC doesnt work.
What works?
DATA, RIL, WIFI, BT, TWRP - ROOT... KNOCK ON/OFF
Click to expand...
Click to collapse
Thank you,
I am going to give this a shot shortly
23bobbyg said:
Thank you,
I am going to give this a shot shortly
Click to expand...
Click to collapse
Just a quick question. If I make a backup of my current modem with TWRP ( currently I am running the att rom on my sprint Flex and just want to update to KK) and flash it after I update to the KK rom will that work?
I personally used my twrp backup of LS995ZV7 Modem. You could try that but probably it will not boot. Or just show "radio off"
OK
I will wait and download the one you post. As this is my everyday phone I do not want to mess it up
THanks
Check your PM.
Help
Hi friend, i did all but i lost my modem backup, can you upload a backup of your modem?, another question, i cant flash stock of sprint rom cause flash tools said me to isnt same models, have another way to return to sprint rom?
@bto001 use towelroot + supersu + freedomflex. Download the ls995 zip found in this guide made by @kintwofan http://forum.xda-developers.com/lg-g...de-to-t2814158
Remember to always hit the "thanks" button if my post helped you.
This way you can return to stock without the need to use flashtool.
I will PM you the link to my twrp modem backup.
Hablas español?
i didnt see thanks button =)
If I speak Spanish .
You send the link by PM .
Let me know if it works or if you have any problems .
Si hablo español.
Te envie el link por PM.
Me avisas si no funciona o si tienes algun problema.
xD
Yes, I saw that you live in Honduras , I pedia key decryption file , but I tell you that I could already solved , thanks, now I have another problem , that v20 gives me no signal is off radius ( the search signal ) not achieving turn it in any way , and modify multiple files and nothing , achievement let me choose the type of networks ( CDMA , lte , gsm) but I can not do that search , I jump error immediately and the * # * # 4636 # * # * sends me to the features of the phone , and let me see that the radio is turned off but will not let me pin , I click and do nothing, you will have some idea ?, I restore efs but still nothing , I put simunlock folder and nothing gives me problems postscript rom with usb connections , as they sometimes do not recognize the cell pc (only this rom) and second postscript: as it is over there ? I never left Mexico eh =). Thanks in advance. Nothing again eh version of justin but I do not like because I do not properly knock on , just do it in the center of the screen and it does kk wherever.
I solve That just installing root explorer and change into carpet system / build.prop the model and restart , then a flashing back tot With stock rom.
Si, vi que eres de honduras, me pedia clave de desencriptacion el archivo, pero te cuento que ya lo pude solucionar, gracias, ahora tengo otro problema, que la v20 no me da señal, tiene apagado el radio (la busqueda de señal), no logro encenderla de ningun modo, ya modifique varios archivos y nada, logro que me deje elegir tipo de redes (cdma,lte,gsm) pero no puedo hacer que las busque, me salta error inmediatamente y con el *#*#4636#*#* me manda a las caracteristicas del telefono, y me deja ver que el radio esta apagado pero no me deja prenderlo, le doy click y no hace nada, tendras alguna idea?, le restaure la efs pero igual nada, le puse una carpeta de simunlock y nada, posdata me da problemas la rom con las conexiones del usb, como que a veces no reconoce el celular la pc (solo con esta rom) y segunda posdata: como es por alla? nunca eh salido de Mexico =). Gracias de antemano. Por el momento eh vuelto a la version de justin pero no me gusta porque no me funciona bien el knock on, solo lo hace en el centro de la pantalla y con kk lo hace donde sea.
I solve that just installing root explorer and change into system carpet/build.prop the model and restart, then flashing back with tot stock rom.
As it is full of spectacular landscapes and places beautiful country .
Ok I'll explain .
The process is returned to stock 4.2.2 unlock and be sure to use the lame q gsm signal.
After you install the rom 4.2.2 attsprint of justinswidebody .
Here you do the upgrade to kitkat d950 with tot and flashtool .
D950 use towelroot install TWRP Once in kk and you loads the backup of my modem. If you do not charge the backup never grabs modem signal.
And I also have the problem of including usb to charge no q restart . I 'm working on that I think could be the kernel.
regards
Pues es un pais hermoso lleno de paisajes y lugares espectaculares.
Ok te explico.
El proceso es regresar a stock 4.2.2 usar el unlock y asegurarte q coja señal gsm.
Despues instalas la rom 4.2.2 attsprint de justinswidebody.
Aqui haces el upgrade a kitkat d950 con el tot y flashtool.
Ya estando en kk d950 usas towelroot instalas twrp y le cargas el backup de mi modem. Si no cargas el backup del modem jamas coje señal.
Y yo tambien tengo el problema de los usb inclusive para cargarlo hay q reiniciarlo. Estoy trabajando en eso creo que podria ser por el kernel.
Saludos
Orale , pass me the key for decryption of your modem, mega asks me =)
Orale, pasame la clave de desencriptacion de tu modem, me la pide mega =)
Gracias, este no me pide, el que me mandaste por pm si, intentare a ver que tal, con la att de just si tengo señal bien, pero esta es la del problema, pruebo meterle tu modem y te comento que paso xD
---------- Post added at 07:57 PM ---------- Previous post was at 07:52 PM ----------
Me marca error al intentar meterlo con el t y con el cwm, aborta la instalacion.
Op updated
bto001 said:
Gracias, este no me pide, el que me mandaste por pm si, intentare a ver que tal, con la att de just si tengo señal bien, pero esta es la del problema, pruebo meterle tu modem y te comento que paso xD
---------- Post added at 07:57 PM ---------- Previous post was at 07:52 PM ----------
Me marca error al intentar meterlo con el t y con el cwm, aborta la instalacion.
Click to expand...
Click to collapse
Did it work? I had no answer from you again.
I´m using another boot img and charging and mtp are working normally now.
Testing NFC it turns on but I have no other phone to test it with.
Hit me back pal! @bto001
Hola
Sorry for not having answered before, the truth had to come back to the version of the other partner because the cel occupied much use for work and did not have much time to play with , if you have another image Might porfavor0¿ post it ? for download in the afternoon and re-do the test , I had a working revoltura why you do not answer before =).
Sry for not answer you , but i have too many work to do , i cant use esta en cause have any available lot of work and need my cellphone for it , i didnt Have time to play with it , if you Have the another image can you post it ?
You command in both languages ​​because I provides more obviously my native language , but just help page if anyone has the same problem, greetings and thank you very much for the help, postscript is different in this version of image you have ?
Perdon por no haberte contestado antes, la verdad tuve que volver a la version del otro compañero porque ocupaba usar mucho el cel para el trabajo y no tuve mucho tiempo de jugar con el, si tienes la otra imagen podrias postearla porfavor0¿? para descargarla en la tarde y volver a hacer el test, tuve una revoltura de trabajo por eso no te conteste antes =).
Sry for not answer you, but i have too many work to do, i cant use this version cause have a lot of work and need my cellphone for it, i didnt have time to play with it, if you have the another image can you post it?
Te mando en los dos idiomas porque se me facilita mas obviamente mi idioma natal, pero igual ayuda a la pagina si alguien tiene el mismo problema, saludos y muchas gracias por la ayuda, posdata que es lo diferente en esta version de imagen que tienes?
0o
o0
eng plz
two idioms
It was write in two lenguajes, but both speak spanish, for that cause i wrote in spanish and englis, cause i preffer explain in my mother lenguaje but repply on english for other users, search on middle paragraph its wrote in english.
OP UPDATED.
If this gets enough attention I will upload a full twrp backup and with help of some moderator we might make a flashable zip of this Rom.
I am also testing/replacing the system apps with the G3 ones so "we" (sprint) users can
have this GSM unlocked rom just as the D950 (att) model.

Question Help How to change Rom Stock Redmi Note 10S of Operadora Claro Colombia (Activate sim2)

Hi guys, I need help with my Redmi Note 10 purchased in Claro Colombia. This version has the SIM 2 locked.
I want to change the rom to the global version to enable the sim2 and remove all junk apps, but I don't know what software to use.
I would be very grateful if you could help me.
suarezfco said:
Hi guys, I need help with my Redmi Note 10 purchased in Claro Colombia. This version has the SIM 2 locked.
I want to change the rom to the global version to enable the sim2 and remove all junk apps, but I don't know what software to use.
I would be very grateful if you could help me.
Click to expand...
Click to collapse
Hola, I think first you must unlock your bootloader, and then, you can flash every rom that you like (always official MIUI from Mi) https://forum.xda-developers.com/t/firmware-redmi-note-10s-rosemary-auto-updated.4294971/
Authi said:
Hola, I think first you must unlock your bootloader, and then, you can flash every rom that you like (always official MIUI from Mi) https://forum.xda-developers.com/t/firmware-redmi-note-10s-rosemary-auto-updated.4294971/
Click to expand...
Click to collapse
Authi thanks for your reply
and for sharing your knowledge with others.
I used xiaomitools v2 changed the rom for me, but the logo still appears and did not enable the sim2.
I'm going to do what you tell me to unlock the bootloader and flash the rom to see if I can remove the logo and enable sim 2.
suarezfco said:
Hi guys, I need help with my Redmi Note 10 purchased in Claro Colombia. This version has the SIM 2 locked.
I want to change the rom to the global version to enable the sim2 and remove all junk apps, but I don't know what software to use.
I would be very grateful if you could help me.
Click to expand...
Click to collapse
Hi,
If you want to remove all the junk apps, then i would recommend using this tool
https://github.com/Szaki/XiaomiADBFastbootTools
Its a very simple and useful tool
All the instructions are given there as well.
For the list of bloatware, you can refer these websites:
https://rootmygalaxy.net/xiaomi-bloatware-list-remove-safely-from-miui/
https://selivan.github.io/2020/02/25/removing-bloatware-from-xiaomi-miui-android.html
https://technastic.com/xiaomi-bloatware-list-miui/
suarezfco said:
Authi thanks for your reply
and for sharing your knowledge with others.
I used xiaomitools v2 changed the rom for me, but the logo still appears and did not enable the sim2.
I'm going to do what you tell me to unlock the bootloader and flash the rom to see if I can remove the logo and enable sim 2.
Click to expand...
Click to collapse
@suarezfco para desbloquear el bootloader te recomiendo usar la herramienta MiFlashUnlock, recomendado al 100%, lo único con lo que podrías tener problemas son los drivers, comienza con este video:
me comentas como vas
dajohlopez said:
@suarezfco para desbloquear el bootloader te recomiendo usar la herramienta MiFlashUnlock, recomendado al 100%, lo único con lo que podrías tener problemas son los drivers, comienza con este video:
me comentas como vas
Click to expand...
Click to collapse
@dajohlopez saludos, gracias por responder, el bootloader lo realice como lo indicas con miflashunlock, pero para el proceso de cambio de rom fastboot utilicé xiaomitools v2 y me dio un error, ahora se queda pegado en el logo de redmi y de ahí no pasa
suarezfco said:
@dajohlopez saludos, gracias por responder, el bootloader lo realice como lo indicas con miflashunlock, pero para el proceso de cambio de rom fastboot utilicé xiaomitools v2 y me dio un error, ahora se queda pegado en el logo de redmi y de ahí no pasa
Click to expand...
Click to collapse
Hola, si te bajas una rom que sea compatible con fastboot, NO necesitas para nada ninguna aplicación adicional, ni xiaomitools ni nada. Descomprimes el archivo .tgz (con Winrar por ejemplo) en una carpeta lo mas cercana a la raiz de C:\ (yo uso C:\Temp) Acto seguido, allí dentro, encontrarás un archivo llamado "flash_all.bat". Simplemente, verifica que tu pc reconozca el móvil, si conseguiste desbloquear el bootloader, ya deberías reconocerlo sin problemas, entonces clica ese archivo, se abrirá una ventana de Ms-Dos, y con un poco de paciencia, deja trabajar el archivo por lotes, y en unos minutos, tendrás flaseado tu telf. sin problemas. No te deseperes, si pasa algún minuto sin que parezca que no avanza, déjalo trabajar, y si todo va bien, lo tendrás resuelto.
Saludos
--------------------------------------------------
Hello, if you download a ROM that is compatible with FastBoot, you do not need any additional application, or Xiaomitools or anything else. Unzip the .tgz file (with WinRAR for example) in a folder as close to the root of c: \ (I use c: \ temp) Then, there inside, you will find a file called "flash_all.bat". Simply, check that your PC recognizes the mobile, if you managed to unlock the bootloader, you should already recognize it without problems, then click on that file, an MS-DOS window will open, and with a little patience, let the batch file to work in a few minutes, you will be flaky of your tel. No problem. Do not desperate, if you spend some minute without it, it seems that it does not advance, let it work, and if everything goes well, you will have it resolved.
Greetings

Categories

Resources