Anyone know if this would be possible. I would luv to get this phone. Am using a tytn at the moment on softbank network. Considering purchasing a Kaiser from overseas on next business trip to bring back to Tokyo and give it a whirl.
Thanks,
Theoretically it is possible as the radios and sim cards should be compatible.
However, the Softbank AP for the flat rate data plan has not been cracked. Yet. There are a few people with Treo 750s that are also interested in seeing this password revealed - as well as me. I would like to try the Libra - or perhaps even the Omni or Wings (when and if they debut) if they have the right radios.
If you don't mind paying more for data, then the expensive/slow data connection to Softbank is possible.
RayB said:
Anyone know if this would be possible. I would luv to get this phone. Am using a tytn at the moment on softbank network. Considering purchasing a Kaiser from overseas on next business trip to bring back to Tokyo and give it a whirl.
Thanks,
Click to expand...
Click to collapse
Here's the interesting thing. Ordered a Kaiser from UK via DHL (delivered in 3 days!) and today when I stuck in my Softbank SIM, I found that the Kaiser (TytnII) software automatically detected that I was on Softbank and automatically installed the connection settings for Softbank. I am able to surf using that auto configured connection though I cannot confirm this is the connection that uses the flat rate 3G thing. More investigation needed.
There's been tonnes of posts on how people can setup a link using software/hacks/whatever to access the flat rate software package but haven't had enough time to check it out.
At the moment, except a direct HSDPA (as indicated by the icon) internet link, there's no MMS or SMS (!) so I need to figure out why; latter might be because MMS and SMS seems to share the same mailbox now so maybe because I've not setup mms as yet, even SMS won't come in
Boy, why has everything in Japan got to be so complicated...
Auto-configured the connection huh? Cool trick. It should be easy to check.
The access point name of the flat rate connection is open.softbank.ne.jp. I believe the non-flat rate connection is [email protected] (or something like that).
You should be able to check by looking at Settings>Connections>Manage my existing connections, then select edit to view the particulars for the Softbank connection.
As far as SMS/MMS, you hit the nail right on the head. I have had troubles with the integrated SMS/MMS mailbox here in Japan with various ROMs for my Hermes. It might (big might) be possible to overwrite your SMS/MMS software with a previous verson of Arcsoft MMS that has separate mailboxes. That might (again, big might, never tried it before) free up your SMS. If that succeeds, we can get you to try installing MMSlite.
Hi!
I know this is off topic, sorry about that.
But is there a recent 2007 'how to install Japanese support' on a TyTn II?
I have read a lot and some of it is scary !!
Sorry again to jump in on your thread !
Ofiaich
ofiaich said:
Hi!
I know this is off topic, sorry about that.
But is there a recent 2007 'how to install Japanese support' on a TyTn II?
I have read a lot and some of it is scary !!
Sorry again to jump in on your thread !
Ofiaich
Click to expand...
Click to collapse
Ofiaich - no, no, don't worry about the off-topic post.
And you don't ever need to be scared of modding your phone as long as you have a backup utility. I recommend SPB Backup, but some are fond of Sprite.
The Kaiser is a relatively new device so you are kind of flying blind. However, since both machines run WM6, many of the same packages should be viable. Let's start with the directions found in Make your X01HT a WM6 Device (for Gaijins)
Now time to have your Hermes speak Japanese
Japanese fonts
Use the excellent work from Asukal, that you can find here:
http://www.asukal.jp/WM5/LetsJapanNo5.zip
Japanese input
Not using for myself, but these work perfectly (I tried):
http://www.asukal.jp/WM5/BagojsINPUT.zip
If you prefer a Japanese input without the annoying "Floating bar", ie just the same input way as your original WM5 Softbank ROM, just downlaod and install the "MS IME31 J" link from Asukal's page:
http://hn801.hkes.com/Data/SIP/IME_31J_QVGA_F.zip
Click to expand...
Click to collapse
I believe that these files are generic for WM5/6, and that they should work on any QVGA machine. The picture from Asukal's page shows them working on an Alpine, so they are not specific to Hermes.
The following directions however, might be specific to the Hermes, as they are registry settings for the keyboard. The above packages should actually automatically change the two HKCU registry entries below.
To map properly your Softbank Keyboard, do the following registry modifications:
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty] "Layout"= 30411 (Hexadecimal base)
[HKEY_CURRENT_USER\keyboard layout\Preload] "Default"= e0010411
[HKEY_CURRENT_USER\keyboard layout\Preload\1] "Default"= e0010411
More details here: http://forum.xda-developers.com/show...keyboard+x01HT
Click to expand...
Click to collapse
I am really interested in helping you (i.e. using you as a guinea pig) as I am also interested in importing different devices for use in Japan and need Japanese support.
thanks very much larsuck !
I sent you a PM !
I have found some of those pages before! I am an absolute beginner for Windows Mobile so some procedures are a bit daunting !
I hope to get a TyTn II very soon ! Saving up and trading old phones etc!
I will read your links again thoroughly and come back to you!
Ofiaich
I purchased Kaiser.
There was environment I displayed Japanese, and to be able to beat against Japanese with Atok.
I tested SB in Kaiser with usable ConnSBM_ORE2h.zip, but Password was not formed.
I think that Password is made if I do not understand that I make ORE2cert.cab for Kaiser, and it is possible for this.
Maro,
So, let me just make sure I understand: you have a Kaiser, and that the Kaiser can read Japanese, and that you can input Japanese using third-party software called ATOK.
That is good news for our friend ofiaich.
Now, I understand you tried to install Softbank's flat rate connection set up using ConnSBM.cab, ORE2cert.cab, Out.xml, and WIFIwake.exe, all four of these files being the ones used for the Hermes. (There is also a package for Universal called ConnSBM_ORE2u.zip.)
And you say that you can make a ORE2cert.cab for Kaiser and if you do that then the password will be made?
If that is so, then that is great! But I have a feeling that you don't need a new ORE2cert.cab. The ORE2cert.cab for the Hermes and the ORE2cert.cab for the Universal seem to be the exact same file.
larsuck said:
Auto-configured the connection huh? Cool trick. It should be easy to check.
The access point name of the flat rate connection is open.softbank.ne.jp. I believe the non-flat rate connection is [email protected] (or something like that).
You should be able to check by looking at Settings>Connections>Manage my existing connections, then select edit to view the particulars for the Softbank connection.
As far as SMS/MMS, you hit the nail right on the head. I have had troubles with the integrated SMS/MMS mailbox here in Japan with various ROMs for my Hermes. It might (big might) be possible to overwrite your SMS/MMS software with a previous verson of Arcsoft MMS that has separate mailboxes. That might (again, big might, never tried it before) free up your SMS. If that succeeds, we can get you to try installing MMSlite.
Click to expand...
Click to collapse
Ok, bit of progress. Can verify that the auto-configured connection (which works fine) is the non-flat rate connection so would strongly advise folks to be careful in using it.
Installed MMSlite and ended up having constant irritating reports that storage memory is full! No way MMSlite can occupy so much memory! Anyway, ended up having to hard reset. Once reset, this time I installed CE Star to provide japanese font support and then installed MMSlite. Worked a treat. Can confirm I can receive both MMS and SMS but at the moment can only send SMS; MMS is no go as that 'special S!Mail' mail box will not allow phone number as destination. I think the S!Mail MMS mail box is configured as a normal email mail box so is expecting an email address or something. Next is to find how to get access to the flat rate connection so time to dig the archives...
Any other fellow Japanese Kaiser users who can share some experiences?
Thanks Larsuck for the comments and tips....
dajtw said:
Ok, bit of progress. Can verify that the auto-configured connection (which works fine) is the non-flat rate connection so would strongly advise folks to be careful in using it.
Click to expand...
Click to collapse
Well, that's a bummer, but as Softcrank keeps their flat-rate settings top top secret, it was also to be expected.
Can confirm I can receive both MMS and SMS but at the moment can only send SMS; MMS is no go as that 'special S!Mail' mail box will not allow phone number as destination. I think the S!Mail MMS mail box is configured as a normal email mail box so is expecting an email address or something.
Click to expand...
Click to collapse
This is how MMSlite normally works, unfortunately. It can't send to phone numbers (or at least I have never been able to do so). However, build 275 has a function that, when you try to send an MMS to a phone number, it looks up the phone number in your contacts list and gives you a list of 'real' email addresses to choose from. Of course, there have been stability issues reported with build 275.
Question here: did your Kaiser have the joined SMS/MMS inbox? Or were the inboxes separate before you installed MMSlite? I have had trouble with the joined SMS/MMS inbox on some Hermes ROMs on Softbank.
Next is to find how to get access to the flat rate connection so time to dig the archives...
Click to expand...
Click to collapse
Happy hunting! I (and a slew of other Japanese cell phone otaku) have been looking and digging and decoding and packet-sniffing and begging to try to get our hands on the password. The pre-April 1st connection informaiton is out there, but unfortunately they shut that connection down.
larsuck said:
This is how MMSlite normally works, unfortunately. It can't send to phone numbers (or at least I have never been able to do so). However, build 275 has a function that, when you try to send an MMS to a phone number, it looks up the phone number in your contacts list and gives you a list of 'real' email addresses to choose from. Of course, there have been stability issues reported with build 275.
Question here: did your Kaiser have the joined SMS/MMS inbox? Or were the inboxes separate before you installed MMSlite? I have had trouble with the joined SMS/MMS inbox on some Hermes ROMs on Softbank.
Happy hunting! I (and a slew of other Japanese cell phone otaku) have been looking and digging and decoding and packet-sniffing and begging to try to get our hands on the password. The pre-April 1st connection informaiton is out there, but unfortunately they shut that connection down.
Click to expand...
Click to collapse
Thanks for the info relating to MMSlite; think I have build 275 so could give it a shot I guess.
My Kaiser did indeed have the joined SMS/MMS box prior to installing MMSlite; post-installation they're still joined. What type of trouble did you have just out of curiosity? I've yet to have any issues.
Bummer, thought there existed some means of generating the password etc etc using some really convoluted means of installation in xda forums? So I take it there currently exists no means of accessing the Softbank flat rate connection outside of using the original Japanese mobile? I thought there was a post that would auto-populate the password field after the convoluted setup?
Yes, there is a convoluted process like that. Unfortunately, it depends on an .exe file called WIFIwake.exe that is device specific. There is an .exe for the Hermes and one for the Universal - none for the Kiaser yet. If you would like to try either of those links, they are
here
If you have the knowhow to delve into an .exe file and make the right changes (I have compared the files and there are only two changes to make it seems), I know you will make more than a few people happy. Needless to say, I don't have any idea how to even start editing programs.
I have been searching, trying to find a work around for a couple of months now. At first, I had been looking for the password itself, but I don't know that it is such a good idea for the password to get out. That's what happened before, and in response Softbank closed down that access point and switched to the current one.
So, now I'm looking for a solution in the form of a .cab or registry hack - one that can be used on a wider range of machines. If and when I succeed, I will post to this form and you can give it a shot.
I tried two ROMs with the SMS/MMS joined mailbox. The first one was Black Satin, and on that ROM the SMS wouldn't send or recieve. I didn't even keep that ROM long enough to check MMSlite. The second ROM was T-Lite by edhass. That ROM had no problems sending and recieving SMS, but when I installed MMSlite it created a separate mailbox called MMS1. So, everytime I would go to send a MMS, it would automatically try to send it using the joined SMS/MMS settings and it wouldn't go through. So, it wasn't that it didn't work, it was just kind of a pain in the ass.
Hi!
ordered the TyTn II and, with luck, it should be with me tomorrow!
At the latest Monday before 1.00pm!
I am an absolute beginner with Windows Mobile, and yes, I will RTFM thoroughly and also search and search.....
But if anyone can help with like an Idiots Guide to Installing Japanese, I would be grateful!
larsuck, I have downloaded the files that you told me about, from the post on the 19th!
Good weekend for all!
Ofiaich
Patched WIFIwake from Chaimd
Huzzah! Huzzah!
Chaimd has apparently patched WIFIwake to work for Kaiser!
With this, Kaiser users should now be able to get the flat-rate Softbank connection working.
First, here is the thread where Chaimd first posted this info and the patched WIFIwake: http://forum.xda-developers.com/showthread.php?t=298031&page=11
Read it first, because there is something about CID-unlocking the Kaiser and memorizing the Pre-unlocked CID. I will alert Chaimd to this thread and hopefully he can answer questions.
Thank you, larsuck. I'll try to explain the working WIFIwake.exe on Kaiser, in my terribly poor English.
Now, we can connect to the flat-rate Softbank access point, to patch and sign WIFIwake.exe.
That WIFIwake works copmpletely on my Kaiser. But that method depends on;
Pre-Unlock CID must be known!
CID unlocked, I used Pof's Hard-SPL.
Patching WIFIWake.exe;
01C760h "KAIS1300KAIS1300", 16 chars in UTF-16.
01C784h Pre-Unlock CID, 8 chars in UTF-16.
01C798h Pre-Unlock CID, 8 chars in UTF-16.
Self-Signing WIFIwake.exe
To Install not only connSBM.cab, Out.xml ans WIFIwake.exe,
but also your Self-Signing CAB file.
If you understand Japanese, you can get some informations of Kaiser & WIFIwake in this blog;
http://d.hatena.ne.jp/chai99/20071008
Now if you don't mind me asking, how do you use a non-japanese sim based phone on softbank with a data contract (not technically) but actually like go about it? As i go back and forth between japan frequently and in ~6 months will be moving there again for a year or two. Last time i lived there, I never had a mobile. Times change and now i need one for sure while there. I'd love to use a Kaiser that I have on hold at AT&T (can get it completely unlocked...). I thought they don't give SIM cards on there pre-paid phones...
@Philz,
If you get a cheap phone from softbank with a voice plan, you can use the sim card from that in your Kaiser. If your Kaiser is unlocked, the sim card should allow text and voice without messing with any settings. There is also a .cab program called Carrier Settings Wizard (or some such) that is floating around in the Hermes threads. It might be able to set up the (non-flat-rate) data settings for Softbank.
If you are a heavy data user and want a flat-rate data plan then, after signing up for one, you would need to apply the treatment that we are discussing here. However, from what chaimd says it doesn't sound easy.
Unfortunately, contracts from Softbank are usually for two years - not ideal for someone who is always traveling back and forth. Depending on how long you are in Japan, it might be cheaper just to roam here until you make the move.
@chaimd,
You said you used Pof's tool. Is your Kaiser Super-CID? It seems strange that the CID must be known if the device is Super-CID.
Also, you said:
"5. To Install not only connSBM.cab, Out.xml ans WIFIwake.exe,
but also your Self-Signing CAB file. "
What is this Self-Signing CAB file? Do you mean the patched WIFIwake?
Or perhaps ORE2Cert?
Will the ORE2Cert from the Hermes package work with the Kaiser?
Hi, larsuck! I'm writing on Kiser through the flat-rate Softbank connection, now.
First: Is my Kaiser Super-CID?
Yes, my Kaiser is Super-CID. First, I checked "info 2" command, after the installation of pof's Hard-SPL. As WIFIwake works on my unlocked Treo750, and I jumped and thought "Yes! Super-CID! WIFIwake will work without patches!", ..... but it does'nt generate the password in real. Indeed, it is strange. I was confused.
We tried many many patterns of patching WIFIwake, but WIFIwake did'nt generate the pass, and we spent a few days. Finally, one of us found the right way! and we've got to the flat-rate Softbank connection. We found pre-unlocked CID was known to work WIFIwake on Hard-SPL Kaiser. I don't know why?
2nd: What is self-siging cab file?
The itamae's WIFIwake has already been signed by him to work without a ROM cooking. ORE2Cert, ore-ore-certification means self-sign certification in Japanese, is his signature to allow execute a previllaged code for WindowsMobile devices. But, if you patch the WIFIwake, WindowsMobile rejects it as a illeagal modified code. Then, you must re-sign WIFIwake, and install yor own Self-Sign-Cert.cab with your WIFIwake. You need to make your own Self-Sign-Cert CAB file. ORE2Cert.cab from the Hermes package does'nt work on Kaiser.
I described how to make Self-Sign files without VisualStudio in my blog. It's almost the minimum procedure of self-siging, but it's in Japanese.
Hi,
I need a little help.
I've not had my Diamond for long and new to WinMo and I'm trying to put TT7 on it, but I need to get the DeviceID, but don't know where to locate it?
Any help much appreciated!
Thanks,
DG.
If you already installed TT then connect your phone to PC and locate navigator.bif file! openit with Notepad and there you find a lots of info, and your device ID
Also, device ID should popup when you launch the program with directions to activate the installed map. ( at leat with Tom Tom 6
If you had be using a purchased version of TT then you would not need to locate the DeviceID
DanGlee said:
Hi,
I need a little help.
I've not had my Diamond for long and new to WinMo and I'm trying to put TT7 on it, but I need to get the DeviceID, but don't know where to locate it?
Any help much appreciated!
Thanks,
DG.
Click to expand...
Click to collapse
Hey, had the same problem m8
heres what you do
open tomtom7, on the map in the botton right hand corner is the time and right below is satelite connecton indicator. Tap that and then tap ''version'', also botton right hand corner. And BAM there is your DeviceID.
Deeds.
Thanks guys!
I'm going to try that tonight... hope I don't have too much trouble with it... after readying here, it seems people are having a bit of a mare with it!
Windoze9t8, I know I should be using a purchased one, but after coughing up 350 queens heads on a phone, another 200 on a piece of software if a little extreme! (well, thats the cost on the tomtom site!)
I got tt7, it says its for HTC, hope it works!
Wish me luck!
Windoze9t8 said:
If you had be using a purchased version of TT then you would not need to locate the DeviceID
Click to expand...
Click to collapse
Yes but where to buy TT7?
Indeed you wont need a device ID when you have purchased and or use tomtom maps legally you can see your device ID.
You cant buy tt7 (yet) tt6 will work
No joy with TT7 anyway!
The Home2Go or whatever it is could not install / run after I copied it to the phone? I'm either doing something totally wrong or I got the wrong file.
It was the legal one you get from tomtom website, then you install that and then the maps... apparently!
Any other free apps? I tried google maps, but it uses a data connection and I just want to use the GPS so it doesn't be costing me anymore monies!
Just out of interest (legal copy or not) when I connect to the phone via ActiveSync, do I just generally copy apps there and run them, or is there a way to install them from my machine to the phone via ActiveSync? For TT7 I created a folder called 'Navigation' and put it in there (obviously from reading above, it didn't work!)
If only it a drag and drop hey...
DG
sorry if i am wrong, but nobody here know that the device id is in:
settings/system/device information/identity ? are you speaking about IMEI? isn't this the device identity? i think there is also a key combination you "dial" and the phone will return you the IMEI..i don't remember which.
Windoze9t8 said:
If you had be using a purchased version of TT then you would not need to locate the DeviceID
Click to expand...
Click to collapse
This is not true. If you'd previously been using TT on a different device then you will need to give the DeviceID to TomTom (direct or via www.ttcode.com) in order to reactivate your maps on the new device. I had to do this when moving from a C500 to an M600.
KukurikU said:
are you speaking about IMEI? isn't this the device identity?
Click to expand...
Click to collapse
The DeviceID is a 'TomTom-ism' - a code that TomTom uses to uniquely identify your device. It must be obtained through some process involving fixed identities of the device and so whilst it could well be derived from IMEI it is not actually the IMEI itself.
Mathew
MJNewton said:
This is not true. If you'd previously been using TT on a different device then you will need to give the DeviceID to TomTom (direct or via www.ttcode.com) in order to reactivate your maps on the new device. I had to do this when moving from a C500 to an M600.
Click to expand...
Click to collapse
Give the ID yes, but you dont have to locate it as the code splash screen appears with the code on - which you then provide to the site ttcode.com, if one is trying to find the code in the bif file then that method is being used as a hacked version of TT - repacked
Although you have the ability to activate TT on other devices every six months TTs agreement indicates you may only use the product once on one device.
DanGlee said:
Thanks guys!
I'm going to try that tonight... hope I don't have too much trouble with it... after readying here, it seems people are having a bit of a mare with it!
Windoze9t8, I know I should be using a purchased one, but after coughing up 350 queens heads on a phone, another 200 on a piece of software if a little extreme! (well, thats the cost on the tomtom site!)
I got tt7, it says its for HTC, hope it works!
Wish me luck!
Click to expand...
Click to collapse
it is £50 for the Western Europe version of TT 7.** maps and the application is around on the net.
Dont get me wrong I'm not having a go - just making a point. I am really P*Off with TT as they do not offer an upgrade policy for people who have early version maps like myself.
Good Luck
omaga said:
Yes but where to buy TT7?
Click to expand...
Click to collapse
AFAIK the only official way to get TT7 is by purchasing a Diamond with it pre-installed like the German XDA form O2 (maybe other countries too) then you can get the 7.2 version maps from the TT website.
KukurikU said:
sorry if i am wrong, but nobody here know that the device id is in:
settings/system/device information/identity ? are you speaking about IMEI? isn't this the device identity? i think there is also a key combination you "dial" and the phone will return you the IMEI..i don't remember which.
Click to expand...
Click to collapse
For the IMEI dial *#06# works on all phones
im trying to install tt7 on my tilt i can install the free one city map it comes with but when i try to install the usa map it says invalid activation code. So, indeed i too need find how to install.
I have been looking around XDA's Raphael and Diamond forums for threads on tracking and security software for the Fuze. So far I haven't found a lot of solid information. Here are the most popular anti-theft software I have found so far:
Remote Tracker - Searched the thread and haven't found anything on if it works for the Fuze.
Mobile Justice - No parent site, no support. No idea if it works.
Smartprotect - Not sure if it works on the fuze, saw a comment saying it doesn't.
Ultimate Theft Alert v35 - doesn't work with VGA from what I hear.
W.I.M.P. - I tried this and the SMS does not work
Sprite Terminator - I tried the demo too and the SMS also didn't work. And yes, I use GPS test.
Could someone confirm they have successfully used a tracking software on their Fuze? I understand it may not be possible to get the exact coordinates of the phone, but I think getting the coordinates within a hundred yards is good enough for me to get some sort of idea on who might have stolen it. There is also triangulation which is used by law enforcement, but I am not sure if normal people can actually use it to get their phone's location.
If there isn't a tracking device out there that's accurate enough, what would be the best software for securing a stolen Fuze, or even a non-GPS locating software that has been confirmed to work on the Fuze? I'd really like input from Raphael and Diamond users. Thanks
i don't have a fuze, but i have a sprint tp.. i put smartphonetracker on my friend's phone and it works everytime, but i use sprite terminator. it doesn't work with aim very well, but yahoo it does. i can query the phone with aim, but not get gps info, but i can do both on yahoo. i'm sorry i can't be of any more assistance.. maybe somebody with a gsm will chime in. i know that sprite definitely has sim card change notification, so it definitely is designed for gsm.
Agent Blair said:
I have been looking around XDA's Raphael and Diamond forums for threads on tracking and security software for the Fuze. So far I haven't found a lot of solid information. Here are the most popular anti-theft software I have found so far:
Remote Tracker - Searched the thread and haven't found anything on if it works for the Fuze.
Mobile Justice - No parent site, no support. No idea if it works.
Smartprotect - Not sure if it works on the fuze, saw a comment saying it doesn't.
Ultimate Theft Alert v35 - doesn't work with VGA from what I hear.
W.I.M.P. - I tried this and the SMS does not work
Sprite Terminator - I tried the demo too and the SMS also didn't work. And yes, I use GPS test.
Could someone confirm they have successfully used a tracking software on their Fuze? I understand it may not be possible to get the exact coordinates of the phone, but I think getting the coordinates within a hundred yards is good enough for me to get some sort of idea on who might have stolen it. There is also triangulation which is used by law enforcement, but I am not sure if normal people can actually use it to get their phone's location.
If there isn't a tracking device out there that's accurate enough, what would be the best software for securing a stolen Fuze, or even a non-GPS locating software that has been confirmed to work on the Fuze? I'd really like input from Raphael and Diamond users. Thanks
Click to expand...
Click to collapse
Hi,
Why dont you give SmartProtect a try using Emulated mode to see if it works or not ? From the log itself you will know if the software is working before you use it. On emulation mode, the software will not run the protection but will log everything (for example you can simulate a sim change and check the log or send SMS to your phone and see how the phone responded)
You can check the forum here :
http://forum.xda-developers.com/showthread.php?t=464336
thanks!!
I installed Smartphone Tracker and followed the set-up instructions.
My problem is that I don't know how to actually use it to find my phone. I'm not an SMS person, so I have it set up to receive an email.
Can someone help? The developers instructions only talk about installation and set up.
mayo98 said:
Hi,
Why dont you give SmartProtect a try using Emulated mode to see if it works or not ? From the log itself you will know if the software is working before you use it. On emulation mode, the software will not run the protection but will log everything (for example you can simulate a sim change and check the log or send SMS to your phone and see how the phone responded)
You can check the forum here :
http://forum.xda-developers.com/showthread.php?t=464336
thanks!!
Click to expand...
Click to collapse
Yea I can pretty much say that this works. I've tried it out with a 'partnerphone' and works like a charm. GPS Coordinates, Locking, Blackout Screen, making phone unusable. All kinds of good stuff. I have a Fuze btw and using EnergyRom.
Sprite terminator works with Fuze
No problem whatsoever.
Hi, i came accross some sofware for kaiser, i thought it was called Field engineer or field software but ive searched but cant find it now.
Basically it showed you signal strength, connection type how far from the cell you were and much much more.
anyone job my memory at tell me what its called? or where its from..
Thank you.
Actually I think its hidden mostly inside the WM software.
Have a search in the windows folder on your phone, if I remember correct there is a field test program.
oh is there something ther? ok cool, i have a look, i definatly saw something on a forum about it as well though.
Enable "Show All Files" in file explorer, go to \Windows\fieldtest.exe, and then you can tap and hold, copy it, then go to \Windows\Start Menu\Programs\ and tap and hold, and select "Paste Shortcut", then you have a convenient shortcut to Field Test Mode. And usually, you can also enter *#*#364#*#* into the device's dialer, and it will enter field test mode.
Dave
A7mag3ddon said:
Hi, i came accross some sofware for kaiser, i thought it was called Field engineer or field software but ive searched but cant find it now.
Basically it showed you signal strength, connection type how far from the cell you were and much much more.
anyone job my memory at tell me what its called? or where its from..
Thank you.
Click to expand...
Click to collapse
Is this what You were looking for Sir : http://forum.xda-developers.com/showthread.php?t=274269
It's called FieldTest