Recently whenever I turn my Kaiser on from standby it comes on with the keylock on. I don't think I changed anything to make it do this, and can't see how to stop it - so it comes on unlocked.
Can anyone help? I assume there's a registry setting somewhere, as the control panel doesn't seem to help.
Thanks
omk298 said:
Recently whenever I turn my Kaiser on from standby it comes on with the keylock on. I don't think I changed anything to make it do this, and can't see how to stop it - so it comes on unlocked.
Can anyone help? I assume there's a registry setting somewhere, as the control panel doesn't seem to help.
Thanks
Click to expand...
Click to collapse
did u try settings/personal/lock ?
Yes, that's all off/unchecked. When I turn the phone on I have to press the left soft button, which says unlock, then an on screen button saying unlock. That's what I'm trying to stop happening.
omk298 said:
Yes, that's all off/unchecked. When I turn the phone on I have to press the left soft button, which says unlock, then an on screen button saying unlock. That's what I'm trying to stop happening.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=2363545
#3 there is a suggestion, try it.
Thanks for your suggestion, but I've tried turning it off and on, and soft resetting the phone, and it doesn't make any difference. THe other thing I've noticed is that when I finish a phone call the phone locks as well.
omk298 said:
Thanks for your suggestion, but I've tried turning it off and on, and soft resetting the phone, and it doesn't make any difference. THe other thing I've noticed is that when I finish a phone call the phone locks as well.
Click to expand...
Click to collapse
Try to search for it here on xda via the search function, I am prety sure that it is solved somewhere here.
Hope u will find it. Need to go.
I've tried searching before posting, but didn't find anything to help. It's such a simple thing and I can't believe no-one knows what to do.
Any one else got an idea?
omk298 said:
I've tried searching before posting, but didn't find anything to help. It's such a simple thing and I can't believe no-one knows what to do.
Any one else got an idea?
Click to expand...
Click to collapse
I am back. Dont u have installed any software that can cause it?
Found it! Didn't think I had installed anything recently, but I've just uninstalled an image viewing program called XnView and it's sorted now.
Thanks for your help
omk298 said:
Found it! Didn't think I had installed anything recently, but I've just uninstalled an image viewing program called XnView and it's sorted now.
Thanks for your help
Click to expand...
Click to collapse
ur welcome,always happy to help.
Arrgh! On closer inspection when my phone is connected to the PC via usb the lock doesn't come on. When it's not connected it still does on turn on or at the end of calls. This is getting really irritating!
Any more ideas anyone? Please?
Related
I'm running the stock ROM for the AT&T Tilt and one thing I noticed as soon as I got the phone was that it would vibrate when someone picked up my call. I had an 8125 running WM6 so I was pretty familiar with all of the notification/alarm settings and had not ever seen this one. Sure enough I couldn't find that anywhere in Sounds/Notifications. After a little while it stopped doing it, but now it seems to do it off and on. It did it last night but I don't think it did it for all of the phone calls I made last night. I did a soft reset earlier yesterday some time I believe. It's quite annoying for the phone to vibrate when it's up against your head.
Any ideas what is causing this? I don't have any crazy programs installed, but even if I did it was doing this before I installed anything.
How about hard reset? See that fix the problem. I guess some program might be causing it.
PhoneAlarm for eg has an option to enable vibration when an outgoing call is connected, are you using it? If not, then check other programs for similar settings, even if it's programs in no way related to it
By chance, do you have Inesoft installed?
HKCU\Software\Inesoft\PIM\Settings VibroConnect = 0 (No vibrate on connect)
eskostar said:
PhoneAlarm for eg has an option to enable vibration when an outgoing call is connected, are you using it? If not, then check other programs for similar settings, even if it's programs in no way related to it
Click to expand...
Click to collapse
I am running PhoneAlarm and in the Adv. tab it was indeed checked! Thank you for this, I looked in the profile settings for Home and Work but saw nothing.
If this is an option somewhere else on the phone I'm not sure but it was definitely in the PhoneAlarm.
Thank you for the help!
Sorry to bring up a dead topic. But I'm having the same problem and I have none of the above mentioned programs D:
Kraize said:
Sorry to bring up a dead topic. But I'm having the same problem and I have none of the above mentioned programs D:
Click to expand...
Click to collapse
I have PocketMax Redial that has a setting to do that.
TNT PRO ROM I have that ROM. I don't see PocketMax Redial anywhere.
Kraize said:
TNT PRO ROM I have that ROM. I don't see PocketMax Redial anywhere.
Click to expand...
Click to collapse
Just looking at the first post of that thread I would say it's the Registry_Enable_sounds_on_call setting that does it. You need to ask on that thread.
Wow. I can't believe that I didn't see that.Thank you.
Is there a way to stop this? every time I get a text message, the phone turns itself on. I dont want this, I always push keys and end up calling someone.
Thanks
Just lock the device?
kilrah said:
Just lock the device?
Click to expand...
Click to collapse
I dont really consider this a solution... i have the same problem, so i installed s2u2 and still have the problem... it shouldn't automatically come on when i receive a text anyway.
I don't have a Tilt anymore, so I cannot test this, but the Fuze is set to keep the screen off by default when an SMS/MMS comes in. Try adding this registry key to your phone.
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableSMSWakeUpEvent"=dword:1
Don't forget to soft reset afterward.
Nope, still wakes up.
the0ne.john said:
it shouldn't automatically come on when i receive a text anyway.
Click to expand...
Click to collapse
Well... It does turn on so that it has a chance to notify you a message has arrived... makes sense no?
NotATreoFan said:
I don't have a Tilt anymore, so I cannot test this, but the Fuze is set to keep the screen off by default when an SMS/MMS comes in. Try adding this registry key to your phone.
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableSMSWakeUpEvent"=dword:1
Don't forget to soft reset afterward.
Click to expand...
Click to collapse
for the record, your suggestion did NOT work for me either. i'm running a HyperDragon ROM...details in my signature.
Try this thread:
http://forum.xda-developers.com/showthread.php?t=239044
I'm sure those settings should also apply to your device at least in part if not fully.
My phone does not suceed on aligning screen and therefore the set-up does not go through.
This happens with any rom I install. I assume is more a harwdware than a software problem, because I noticed some problems in the screen touch even before.
Is there a way to by-pass it and to force WinMo to complete the set-up process?
Thanks
tecmobility said:
My phone does not suceed on aligning screen and therefore the set-up does not go through.
This happens with any rom I install. I assume is more a harwdware than a software problem, because I noticed some problems in the screen touch even before.
Is there a way to by-pass it and to force WinMo to complete the set-up process?
Thanks
Click to expand...
Click to collapse
What problem do you have? Is the aling screen proces start all over again after finishing all five steps? Sometimes I do the screen alingnment over four times. You should press right in the center of + with your stylus, and do not shake even a little bit because it will start again when you finish.
If this isn't the problem, hope someone else could help you, even that I don't believe it is possible.
Good Luck!
Cheers!
tecmobility said:
My phone does not suceed on aligning screen and therefore the set-up does not go through.
This happens with any rom I install. I assume is more a harwdware than a software problem, because I noticed some problems in the screen touch even before.
Is there a way to by-pass it and to force WinMo to complete the set-up process?
Thanks
Click to expand...
Click to collapse
not sure if it will work on x1 but worth a shot.
turn off device
plug in usb cable with PC
start device
when active sync is loaded, go to main storage\windows\startup\ and delete welcome.lnk
lev phone on like that for a good tem min. then softrest
agent_47 said:
not sure if it will work on x1 but worth a shot.
turn off device
plug in usb cable with PC
start device
when active sync is loaded, go to main storage\windows\startup\ and delete welcome.lnk
lev phone on like that for a good tem min. then softrest
Click to expand...
Click to collapse
Should work, but if i'm not getting this wrong this will also not let you run auto customizations
killer8nl said:
Should work, but if i'm not getting this wrong this will also not let you run auto customizations
Click to expand...
Click to collapse
he din mention he did a hard rest. :S....sometimes it may ask for allignment all of a sudden....my x1 did once
but if he has already done a hard rest then he has to wait 10min....should work or he could use the app (whose name i 4got ) to go into reg and delete the reg that triggers customization
PS: ill give more details when i get home n check out the app n the reg
tried to delete as you instructed.
Unfortunately he tells that I "cannot delete file welcome: access is denied"
any way to overcame it? tried also to rename or move, but with no avail
tecmobility said:
tried to delete as you instructed.
Unfortunately he tells that I "cannot delete file welcome: access is denied"
any way to overcame it? tried also to rename or move, but with no avail
Click to expand...
Click to collapse
I had the same issue tried even deleting files via third party applications and skipping align screen but once u do it your screen doesn't react for any thing you do. you cannot configure neither ur buttons too sometimes doesnt work. the best way which I found that you try any of the original ROM version ..either UK or NAM which actually resets the radio and brings back in normal stage...hope it works for you.. then you may tryu doing hard SPL and install any of the cooked rom.
I have installed indeed the uK offical version...
Hi guys..need help here..my tytn here can't start and stuck in a white screen and seems jammed for hours...there is no buttons active except power and reset button is wrking..when i connect the device to the pc,it connects normally..but i can't see anything in the screen..it's blank..help me please...
p/s : i never chnged the ROMs..it suddenly happened..
thanks in advnce..
Get into bootloader and flash stock ROM, know you said can't use buttons but maybe camera and reset is
May be blind doing so but worth a shot.
stylez said:
Get into bootloader and flash stock ROM, know you said can't use buttons but maybe camera and reset is
May be blind doing so but worth a shot.
Click to expand...
Click to collapse
thanks for your advice stylez...but i've tried all that...couldn't see anything working..i searched on follow the steps on the wiki,but only white screen appears..still blank...any other suggestions?thnks...
I have the same problem, unable to access the bootloader or flash another ROM. Is there a means to flash a new bootloader onto it?
brat1475 said:
I have the same problem, unable to access the bootloader or flash another ROM. Is there a means to flash a new bootloader onto it?
Click to expand...
Click to collapse
is there any other ways guys??help please...i'm bored without using my tytn..
I've had a problem lately too where my screen will go white, while apps still seem to continue running.
Sometimes, just turning off the screen, then sliding it open will fix it. Other times I have to pull the battery.
As of yesterday, I can also no longer read any memory card in the phone. I think its time for a new phone. I just passed that 2 year expiration date.
man...still no answer yet..i have no idea what is going on with this phne..warranty also expired..any help guys???please....
smcb said:
Sometimes, just turning off the screen, then sliding it open will fix it. Other times I have to pull the battery.
QUOTE]
I think the problem are the 2 screen connectors. You must open the screen part of the cover and tighten the conectors.
Good luck.
Click to expand...
Click to collapse
Anyone experiencing this? My start menu continuous showing up without pressing the start button. Ex. when im using internet explorer the start menu automatically show up and it will lead my phone to hang. I try reflashing my phone but the problem still exist. I really appreciate all the help that i can get. . thanks in advance.
kastamorog said:
Anyone experiencing this? My start menu continuous showing up without pressing the start button. Ex. when im using internet explorer the start menu automatically show up and it will lead my phone to hang. I try reflashing my phone but the problem still exist. I really appreciate all the help that i can get. . thanks in advance.
Click to expand...
Click to collapse
try to hard reset your device first so that the device returns to the default settings - the way it is when you first buy and turn it on, after that you can reflash again
to guide how to do a hard reset on htc Herald you can see it in http://www.hardreset.eu/htc_herald_(p4350)_hard_reset_soft_reset.html
Thanks a lot on your advice. I done doing what you have say but still the problem exist. Im wondering if the problem of my phone is in the hardware. Any Idea?
kastamorog said:
Thanks a lot on your advice. I done doing what you have say but still the problem exist. Im wondering if the problem of my phone is in the hardware. Any Idea?
Click to expand...
Click to collapse
to be sure it, you should take it to the HTC service
hi kastamorog ,
I have the extact same problem since yesterday...really annoying...is ur issue resolved...was it the hardware? plz reply..thanks
iyerharri said:
hi kastamorog ,
I have the extact same problem since yesterday...really annoying...is ur issue resolved...was it the hardware? plz reply..thanks
Click to expand...
Click to collapse
try to reflash with stock ROM first
I dont know if the problem is the hardware. I do not bring my phone to the technician for my HTC has not been sold here in our country. My problem still in here. .But it is now less active. I try re-aligning my screen every time the start button clicking continues. Don't stop re-aligning while holding the start button on the key pad until the continues clicking stops. Holding down the start button at the keypad pervent the start menu on continues clicking that's why you need to hold it down while re-aligning the screen.
thanks
thanks a lot..will try it and let u know
kastamorog said:
Anyone experiencing this? My start menu continuous showing up without pressing the start button. Ex. when im using internet explorer the start menu automatically show up and it will lead my phone to hang. I try reflashing my phone but the problem still exist. I really appreciate all the help that i can get. . thanks in advance.
Click to expand...
Click to collapse
You go to link here Sory ,I'm don't send link over here !)
You can Repair hardware T-mobile Wings folow VIDEO in You Tobe
Good luck