Well i notice more and more people joining my clubb of having the trubble of bad sound in there cars or Bluetooth Headsets Sins Htc Diamond Fails with the Equalizer totaly exapt for when you have a cabel headset.
The the Audiobooster or as i would like to call it Retardbooster sins the guy that came upp with it must be an idiot when more and more uses Bluetooth connection to there headset or Cars..
I have tried Audiomanager, S2p among other players and none of them had a equlizer that would work against the Bluetooth.
Sins the others did either not have any effekt @ all OR they only worked with a cabel headset.
I went and buyed Coreplayer sins i was going to use that anyway for watching movies when ever im not using my car. And WOLA!
Coreplayers Equalizer works in the Bluetooth sets ALLSO.
But here comes the but. It has its flaws. Skip and backwards command for cars of headsets does not work. And the buttons are so small theres no way i would try picking them when im driving my car. for others and mine safty.
BUT this Shows that a stand along Equalizing program thats using the inbuilt player should be np to make?
Why would i wanna use the one thats build in?
1. Skip and Backwards command works in cars and with BT headsets.
2. Toutch commands works
3. looks good.
I would have no problem using s2p if that would have a equalizing program that works towards BT sins its has about the same futures as the inbuilt one.
Please people Help me and the others with this problem. Cause if this problem would be gone then many of us would be less irritated by this problem.
it's my wishlist also, an equalizer which works with bluetooth headset and AVRCP which works with all media players, not only HTC music player and WMP.
I realy have been looking to solv this problem for a long time now. there are tons of program for other Htc phones but none will work on the diamonds BT problem sadly..
So is there no one that has a clue how to fix this problem with the diamond?
jimmyhawkin said:
W
Coreplayers Equalizer works in the Bluetooth sets ALLSO.
But here comes the but. It has its flaws. Skip and backwards command for cars of headsets does not work. And the buttons are so small theres no way i would try picking them when im driving my car. for others and mine safty.
Click to expand...
Click to collapse
if you need big buttons, use MortPlayer
or try this... http://www.pocketmind.com/pocketmusic.htm
Menneisyys said:
if you need big buttons, use MortPlayer
Click to expand...
Click to collapse
Well problem it that Mortplayer my or may not have toutch funktion. Im gonna check it out now.
The second one posted was not an option. Im not paying for a program that does the same things as coreplayer
If i am to pay again i will pay for getting a program that either can just emulate the sound for the inbuilt player.
Or a program that fits all the first options i was talking about.
Well Tried Mortplayer now and that one was worst then coreplayer.
It had bigger buttons and you could style it witch is a big +
But still its not paying any atentions to bluetooth commands like skip and backwards.
Both coreplayer and Mortplayer seems to be using another codec then the standard player in diamond (atleast that is what it seems like.)
Im more and more comming to the conclution that whats needed is just a EQUALIZER that equalizes the normal sound of the phone. Sins that is what the bluetooth is aiming it sounds towards....
So what we need is a stand alone equalizing program that can be activated without hearphones being connected.
im having the exact same issue with my touchpro and someone said come search in diamond forum and of course just problems no solutions
i will add mysalf behind the line, funny that there just a few replys...
also it woud be nice to use the htc radio over BT, jack sh**t, the EQ an RADIO to use with wired headset, i thought it is 2009?!?!!? microsoft?!?!
I use a program called pocket player. When you install it asks you if you want to install a plugin to work with bluetooth commands. I use it in my car and it works fine. Sound is great, fast buffering, bluetooth controls work fine. Give it a try. Maybe download the trial version first.
hope this helps.
Related
I have the ATT tilt version of the kaiser
the rom is dutty's dual touch v1
that rom or possibly the iphone theme had given me an issue with the camera and some other glitchy issues like speakephone speaker not working so i installed a differrent radio which pretty much fixed those but i cant get mortplayer to play the music out of my headphones and if i use windows mp or htc audio manager it playes great through the heaphones (insignia ns-bthdp) but i want to use mortplayer because it has the equalizer built in solving the whole no equalizer for kaiser issue...
also the audio only outputted through the speakerphone (in mortplayer) for a couple of songs after re-pairing the headset and such it would no longer play throught the speakerphoner anymore ieither
so im still really new to al this stuff and am pretty much winging in in most places. i just wanted to know if anyone can make sense of these things but primarily i just want to use mortplayer + BT headphones
so far i have tried :
all forms of resetting headphones/re-pairing
every menu and settings i could find within mortplayer
lol i was used to modding my ipod with linux but this stuff.. is a new ballgame
and im not a programmer of any sorts
ps. so sorry if this has been answered a million times but i swear i looked for a good while but im at the point where my brain is fryed
have you tried btaudio?
Another day, another bug..
We tout a2dp as a killer feature, but whats the point when after listening to music you take or make a call, only for the music to resume by blaring from your PHONE SPEAKER afterwards, prompting you to soft reset just to get your headphones working again. This is very embarassing and did NOT Happen with my old HTC Touch.
What gives HTC?
darthbane2k said:
Another day, another bug..
We tout a2dp as a killer feature, but whats the point when after listening to music you take or make a call, only for the music to resume by blaring from your PHONE SPEAKER afterwards, prompting you to soft reset just to get your headphones working again. This is very embarassing and did NOT Happen with my old HTC Touch.
What gives HTC?
Click to expand...
Click to collapse
i've heard about this bug.
use coreplayer (from my experience) or another civilized, technically advanced app. forget about the original prog. i can add that i am amazed by the quality of a2dp. i don't have any skip. the quality is the same as the wired headphones.
please don't give me the usual "but i bought...and i expected...". get used to it. diamond is strong in some fields and not so strong in others.
maybe they'll (xda-dev) find a cure. let's hope
Doesent happen with my phone ... works like a charm for me..
Even if I connect to bluetooth amplifire and someone is calling, it pauses and I take the call on the phone... and then it plays again when i hang up...
same thing here also as darth
KukurikU said:
please don't give me the usual "but i bought...and i expected...". get used to it. diamond is strong in some fields and not so strong in others.
maybe they'll (xda-dev) find a cure. let's hope
Click to expand...
Click to collapse
No im sorry. There is no excuse. This is poor quality control and id expect better from HTC.
Either the Diamond supports A2DP or it doesnt. There is no inbetween, thats slack.
I expect to be able to use the official player as its quick to launch and easy to jump to a specific album/artist.
Now I cannot walk out and about, fire up A2DP and enjoy music while being able to take calls.
Now I cant even accept calls on the train if I have been listening to music.
Its a joke and it needs to be sorted.
We mock iPhone for not having A2DP but whats the point - we dont have it (working) either!
darthbane2k said:
No im sorry. There is no excuse. This is poor quality control and id expect better from HTC.
Either the Diamond supports A2DP or it doesnt. There is no inbetween, thats slack.
I expect to be able to use the official player as its quick to launch and easy to jump to a specific album/artist.
Now I cannot walk out and about, fire up A2DP and enjoy music while being able to take calls.
Now I cant even accept calls on the train if I have been listening to music.
Its a joke and it needs to be sorted.
We mock iPhone for not having A2DP but whats the point - we dont have it (working) either!
Click to expand...
Click to collapse
here we go.....debating... anoother darthbane2k thread...here we go..
well, this time it seems to be my fault. i noticed too late the style: rhetorical questions/declaration. got sucked in and answered....give you a reason to fight...you brought already the iPhone....warning! warning! troubles!! and you didn't ask me, you ask HTC? why am i answering? ...fast, hitting the panic button!
i am running! bye!
KukurikU said:
here we go.....debating... anoother darthbane2k thread...here we go..
well, this time it seems to be my fault. i noticed too late the style: rhetorical questions/declaration. got sucked in and answered....give you a reason to fight...you brought already the iPhone....warning! warning! troubles!! and you didn't ask me, you ask HTC? why am i answering? ...fast, hitting the panic button!
i am running! bye!
Click to expand...
Click to collapse
Hold on.. lets get something straight, you think its UNREASONABLE for me to expect A2SP to actually work.... It worked just fine on my old HTC Touch and yet my Diamond cant seem to do the job properly.
Instead of sticking your head in the sand and being in flat out denial about the state of the Diamond, why dont you acknowlege the problem and work WITH people like me to try and find a solution.
lol
is it possible that it works on certain headsets than others...?
i have an i.tech and it works fine...however quality itself isnt too great...
but i dont have the music blaring via speakers problem after answering a phone call....
maybe release to us
rom version & headset model?
Same problem here using a BT Sony-Ericsson headset. Latest FR official ROM. And I agree it's very annoying.
Now I cannot walk out and about, fire up A2DP
Click to expand...
Click to collapse
"Fire up A2DP" ?, LOL. You make it sound like it happens in a push of a button.
The process of enabling A2DP takes some dozen clicks deep into the ancient parts of the WM interface.
darthbane2k said:
Another day, another bug..
We tout a2dp as a killer feature, but whats the point when after listening to music you take or make a call, only for the music to resume by blaring from your PHONE SPEAKER afterwards, prompting you to soft reset just to get your headphones working again. This is very embarassing and did NOT Happen with my old HTC Touch.
What gives HTC?
Click to expand...
Click to collapse
Nothing gives dude - I use Sony DS-970 and A2DP works great I use it all day, quality is great never had a single issue - phone and A2DP works flawlessly i.e jumping between call and music and vice-versa is flawless...
CutePinkSox said:
Nothing gives dude - I use Sony DS-970 and A2DP works great I use it all day, quality is great never had a single issue - phone and A2DP works flawlessly i.e jumping between call and music and vice-versa is flawless...
Click to expand...
Click to collapse
For me too btw, with DS-980...
So we have people claiming this problem does not exist and we have others saying it does.
Surely this needs to be investigated further right? Because If A2DP isnt working correctly then I conisder that a vital feature lost.
Im using the Sony DRBT30Q with the latest official UK WWE Diamond ROM and let me add that this worked FLAWLESSLY with my old original HTC Touch.
i don't know if htc alone is to be blamed for these issues....A2DP is a very volatile technology which needs support from all parties involved (i.e the Headset vendor, the Phone vendo and the OS vendor)...and in your case, any of these can be responsible for the problems ur facing
i've had a similar problem with my del bh200 bluetooth headset...the music sounds pretty decent (in fact, i distinctly feel it played better on my earlier HTC Touch elfin)...however, whenever a call comes in, the headset switches off and i have to pair it again...which means we can't use it in handsfree mode....
the same headset however works with several other models in both handsfree and wireless stereo mode
after searching a bit, i found that the problem lies with the microsoft bluetooth stack...so summing up, investigate a bit before naming your thread "diamond renders a2dp useless"
an123 said:
after searching a bit, i found that the problem lies with the microsoft bluetooth stack...so summing up, investigate a bit before naming your thread "diamond renders a2dp useless"
Click to expand...
Click to collapse
Erm.. same headphones operate flawlessly with my old HTC Touch
am using O2 Bluetooth Stereo Headset, same problem, yes, it;s embarrassing..
Noam23 said:
"Fire up A2DP" ?, LOL. You make it sound like it happens in a push of a button.
The process of enabling A2DP takes some dozen clicks deep into the ancient parts of the WM interface.
Click to expand...
Click to collapse
No such problems here.
SwBL's latest rom with Plantronics Voyager 855 headset
Just start media player and hit main button and A2DP starts up, Incoming calls work fine, music mutes and starts up as soon as the call ends.
Loving the new headset
Jules
Sprint Diamond Stock Firmware with Jabra BT8010 1.4 firmware (latest)
Music and calls work fine... Sprint TV doesn't play nice with A2DP and the headset randomly starts playing nothing at times.
I think HTC and Sprint fixed music playback with A2DP but left the other quirks of the Bluetooth Stack for later.
I remember a similar problem on my HTC Vogue, but that fixed right up after the GPS REV A Update.
I didn't want to open a new thread, but this does have to do with bluetooth. Does any body know, when the SE IS-800 are coming out, because the release date of "late 2008" is a bit vague...
Can this have something to do with radio rom version?
I use Sony DS-980.
I had v1.00.25.05 and upgraded to v1.00.25.08 and last time I received a phone call I had to answer the call from my Diamond and after the call the sound came from the phone speaker. I can't remember this happened when I used .05 version
Hello everyone...sorry for bothering, but I'm so frustrated that I'm about to scream...I really need some help here.
I have an AT&T Tilt (Kaiser) running their standard ROM. I just bought a Motorola H780 bluetooth headset for it. The salesperson said that he knew of some people who connected this model to their Tilts and was able to listen to music through it...and even on earpiece box it says that the H780 supports both the Hands Free and Headset profiles. However, I have not been able to accomplish this: it pairs for normal use (phone calls, etc), but nothing else. The "wireless headset" option is greyed out for me; the earpiece only gives me the option to connect using "Hands Free" profile.
I have looked...and looked...and looked for how to do this. The best I found from Google was for people who have Windows Mobile 5 (I have 6)...and even so, I tried a couple of those registry tweaks. On here, I keep running into countless forums that tell you, not how to enable A2DP, but how to improve it (using modified bitpool value in the registry, etc). Can SOMEBODY PLEASE tell me how in the world to get this working? I would really appreciate it...THANKS!
Well this is how i do it. I downloaded this http://www.teksoftco.com/index.php?section=freeware
that is the page then you get a2dp toggle
and then when my bluetooth is on the the headset is on i then go to this program and double click it and it puts another icon by the bluetooth icon and i get sound that way for my music and also calls still come threw too. I am not saying this is the right way but it works great for me...
bluetooth toggle
bluetooth toggle turns on the headset (single ear normal everyday talking sets) like a speakerphone.
all audio will get directed to it, im, e-mail, meeting announcements.
I had a sony headset model, with 12 talk time, nice because it will eat your battery while on ( tilt and headsets rated for talktime will apply to this ) . my plantronics only does 4 hours, so at lunch or when not in use I charge it and phone via usb cable.
I am in IT and most peaple are ok with me wearing bt headset (plantronics 655) and write me off on the gadget side when I wear it 24/7. In reality I listen to music (10% volume on audiomanager) all day (literally) from my 8 gig card.
I have streaming and resco radio, and podcasts. Mostly I converted my common mp3s to wma to have more on the phone and high audio cd quality is not to be expected over bluetooth. The right rom and radio are very helpful and the ability to tun off screen but still play music are all important or battery will suffer even more. using the stock rom and radio will work, just not a good balance team.
duttys roms and a few others had it included btw. I found a way to use audiomanager 1.2 on the new roms with 1 registry setting change to allow suspend mode.
I use a very simple version of it. I attached it because, I searched a bit to find a link, (still recommended for education on the subject) but didn't find it or in the chefs and mods downloads either.
Thanks to both of you for your responses! I appreciate someone taking the time out to help.
Blinkste21957, I tried your solution and it didn't work...for some reason, it saw my headset as being "unusable" (my term) with regards to headset mode. I don't quite know why; my headset clearly says on the box that it is. (Motorola H780). This is why I think that there must be something missing on my phone that will enable the "headset" option for my earpiece.
Acehole, I tried your solution a while back...but it was with the 8525, not the tilt, and with my (previous) plantronics headset. I was less-than-impressed with the problems I had to deal with last time...but I could give it a whirl again with this phone/headset and see what happens.
If anyone knows of anything else I'm missing in terms of "activating" the headset capabilities of my phone (which I thought was supposed to have A2DP), let me know. I'm just very puzzled why, for an earpiece that supports headset mode, my phone would have that option unavailable.
Actually, I think that it is the phone and not the headset. When I had a nokia I was able to listen to music via my bluetooth with no issues. The tilt will not allow you to do this without the use of a third party application. The following is what many people have used and are using as a work around. BTAudio, BlueMusic, A2DPToggle. Tech soft makes BlueMusic and the A2DPToggle and can be found here: http://www.teksoftco.com/index.php?section=products. Unless one of the bright developers here on XDA takes this on, I fear that it will never truly be resolved.
Thanks ACEHOLE.. I was struggling with my iMate.
Someone on here recommended the Sony DR-BT22 some time ago. I bought a pair and they link up and sound is impressive on the Tilt with Windows 6.1
http://www.bestbuy.com/site/olspage.jsp?skuId=8458466&st=bluetooth&type=product&id=1184369168158
I can also control forward and reverse functions of the player with them too.
Bluetooth - especially compatibility - is still one temperamental beast! My car's built-in hand-free made me and the poor guy from AT&T a believer. They can plaster A2DP, HSF, HDP, ESP, JMDP, whatever on the box and it it means squat as to whether it will work or not. Only ones that do are manufacturer-to-manufacturer....sometimes.
Mack
If you have WM 6.1, and if you have a headset with the A2DP profile (NOTE this is not the same as the "headset" profile) then you can listen to music without any problem. If you don't have both, then you need to mess with the software add-ons mentioned earlier in this thread .
As for me, I got the excellent Jabra BT8040 and it works great with My Kaiser with stock 6.1. Only about $30 too.
Anyone tried this hands free device? I am interested in its use as a hands free calling device as well as the ability to play mp3's via bluetooth to an fm transmitter...
I am interested to know how it works with the X1
djglenn1337 said:
Anyone tried this hands free device? I am interested in its use as a hands free calling device as well as the ability to play mp3's via bluetooth to an fm transmitter...
I am interested to know how it works with the X1
Click to expand...
Click to collapse
why waste money on bad quality FM transmitter instead of BT? Get a header that support bluetooth (e.g. JVC BT-1, some models from Sony and others). If you header has aux input and you want to do it in a cheaper way, get an Sony DS-205 and connect that to yr header.
jackleung is rigth.
I have the sp 700 and the FM is bad,but if you need a good portable carkit it's ok.
The sound of the internal speaker and the mic is good.
Still one minus, i had to install this http://www.freewarepocketpc.net/ppc-download-zoa2dp.html
to get it to pair rigth.
Only got the systeemsound over bt but after installing the cab everything works great.
No more bt trouble
This could be a alternertive http://www.motorola.com/Consumers/XW-EN/Consumer-Products-and-Services/Mobile+Phone+Accessories/Car-Accessories/Speakerphones/T505-Bluetooth-In-Car-Speakerphone-with-Digital-FM-Transmitter-XW-EN
I don't now about the fm and bt kwality,but as far as i know it suports multipairing and thats a big + if you have more than 1 device
talbas said:
jackleung is rigth.
I have the sp 700 and the FM is bad,but if you need a good portable carkit it's ok.
The sound of the internal speaker and the mic is good.
Still one minus, i had to install this http://www.freewarepocketpc.net/ppc-download-zoa2dp.html
to get it to pair rigth.
Only got the systeemsound over bt but after installing the cab everything works great.
No more bt trouble
This could be a alternertive http://www.motorola.com/Consumers/XW-EN/Consumer-Products-and-Services/Mobile+Phone+Accessories/Car-Accessories/Speakerphones/T505-Bluetooth-In-Car-Speakerphone-with-Digital-FM-Transmitter-XW-EN
I don't now about the fm and bt kwality,but as far as i know it suports multipairing and thats a big + if you have more than 1 device
Click to expand...
Click to collapse
Would there be a way for you to record a sample of the stream through FM transmitter? I'd REALLY appreciate that as i'm looking to buy the SP700 as well. The only thing that's holding me back is your comment.
I really want the FM option and this one was the only one that i could find that had a nice design and good features.
kareem9nba said:
Would there be a way for you to record a sample of the stream through FM transmitter? I'd REALLY appreciate that as i'm looking to buy the SP700 as well. The only thing that's holding me back is your comment.
I really want the FM option and this one was the only one that i could find that had a nice design and good features.
Click to expand...
Click to collapse
I try ,give me a day or 2 to do this.
soundfiles
First of all ,this is very subjective.
I don't have a kwality recording device. This is recorded with a mp3 player.
It's done in my car(no engine) and it's hard to hear the high tones and the static of the fm transmission.
So don't kill me if you do something and regret it later.
I have recorded speech and music. For reference i have 1 empty soundfile from the recording device so you can hear the static from it.
I stand to what i sayed before ,the sp700 is a great handfree device for calls and navigation,but the fm performances for music is on it's best tolerable but not good enough.
If you don't have 1 and you want it for the music...., i wouldn't buy it,for handfree , great!!!!!!!!!!!, even over fm
alternertive http://www.motorola.com/Consumers/XW-EN/Consumer-Products-and-Services/Mobile+Phone+Accessories/Car-Accessories/Speakerphones/T505-Bluetooth-In-Car-Speakerphone-with-Digital-FM-Transmitter-XW-EN
Kudos. I actually got mine last week and love them so far. I'm having a problem in that after the first pairing when it automatically connects, music will play through the device, not the SP700s, i have to sometimes repair to get it going or do some weird stuff. I've tried A2DP toggle with no success and it seems like a lot have this issue, find a remedy for this?
kareem9nba said:
Kudos. I actually got mine last week and love them so far. I'm having a problem in that after the first pairing when it automatically connects, music will play through the device, not the SP700s, i have to sometimes repair to get it going or do some weird stuff. I've tried A2DP toggle with no success and it seems like a lot have this issue, find a remedy for this?
Click to expand...
Click to collapse
This cab solved all my BT problems.
Read about it hire:http://www.freewarepocketpc.net/ppc-download-zoa2dp.html
Just installed it (didn't find an icon so i'm guessing it runs in the background). I deleted my connection with the SP700 and i'll check how it works out tomorrow (after the first pair).
Is this only good for WM 5? Does this do anything for WM 6.1 phones which supports A2DP?
I've been using A2DP toggle with success, but if this works with the toggling it sounds great.
Update: loaded it on my Tilt. Works GREAT!! Switches between BT headset & SP700 with any toggling or pairing
megatec45 said:
Is this only good for WM 5? Does this do anything for WM 6.1 phones which supports A2DP?
I've been using A2DP toggle with success, but if this works with the toggling it sounds great.
Update: loaded it on my Tilt. Works GREAT!! Switches between BT headset & SP700 with any toggling or pairing
Click to expand...
Click to collapse
Nice to see you here and to have found the thread
@ Talbas, it's working wonders. Thanks a lot, this is a life-saver for those who own the SP700s.
kareem9nba said:
Nice to see you here and to have found the thread
@ Talbas, it's working wonders. Thanks a lot, this is a life-saver for those who own the SP700s.
Click to expand...
Click to collapse
thank you,
you make me
@kareem9nba You use ATT. Have you experienced any problems with your Internet connection after installing zoA2dp? It seems that after I use BT and access the Internet, I get a 403 Forbidden error on my screen. I've tried enabling and disabling the hidden proxy, but I can only get access restored with a soft reset. Anyone else experience this problem?
Another minor glitch. I use Resco radio to stream music through the SP700, after a phone call, the radio has to be manually enabled again.
Don't have a data package so i wouldn't be able to try that. I don't use Resco Radio either. When you uninstall it, does your internet work again?
kareem9nba said:
Don't have a data package so i wouldn't be able to try that. I don't use Resco Radio either. When you uninstall it, does your internet work again?
Click to expand...
Click to collapse
I can't seem to find what is causing the problem. If the problem gets worse, I'm sure a Hard Reset will fix it.
I will say that if I keep the power cord plugged in it works like a antenna and actually will get a better signal. I love how the SP700 works with calls, transmitting and music (when you get it to work). As of now when I want to play music over the SP700 I need to turn off the wireless stereo on the phone and then re-enable it for it to work. Or just re-pair the unit to my phone. A lot of people are say to use zoa2dp to fix this. While it does work and allows music to be played with no re-pairing necessary, the sound quality seems to be greatly reduce. Is anyone having the same issue? Is there a ROM for the Tilt that can fix this bug?
cpedroson said:
As of now when I want to play music over the SP700 I need to turn off the wireless stereo on the phone and then re-enable it for it to work. Or just re-pair the unit to my phone. A lot of people are say to use zoa2dp to fix this. While it does work and allows music to be played with no re-pairing necessary, the sound quality seems to be greatly reduce. Is anyone having the same issue?
Click to expand...
Click to collapse
I have a Fuze and the same problem. It sucks. zoa2dp is automatic, but the sound quality is degraded a bit. To maintain the sound quality I have to manually turning off and then on the Wireless Stereo setting. Another option is you can install the a2dptoggle app. It seems to do the same thing but in 1 click.
http://www.teksoftco.com/index.php?section=freeware
I can't seem to find a program which will route ALL audio to my mono bt earpiece. If there is such an app pls pst. If not, I'd like to help in the dev of such an app. Basicly, whenever the phone sees any audio bt device it will start routing all audio to that device. And it should have a built in audio mixer to control the different programs' volume levels separately.
Let me know what you think
Thanks.
Sent from my T-Mobile myTouch 3G using the XDA mobile application powered by Tapatalk
bumping in hopes for some help on the subject
Agreed, I ride a motorcycle, and music without the chords would be nice.
------------------------------------
Sent via the XDA Tapatalk App
shameless bump or remove this thread
Check if any of those listed apps works for you
http://forum.xda-developers.com/showthread.php?t=547604
Bumpity...bump
As a bike commuter this feature would be great. I typically listen to streams and podcasts where fidelity is not priority one. I use a cheap pair of corded headphones where I chop one ear bud off so that I can keep my left ear, traffic side, open. It would be sweet to have the ability to make/take calls on my commute and listen to audio as well. I know that there are BT earpieces that are a2dp, but should I really have to drop another 40 clams to get one, hells no this is android we get what we want right? That said I would develop a prog to do this but it will take me 6 mos as I have no background. So, to kind devs, myself and several others that I have seen scouring for this sol'n would gladly help test and pay for this functionality.
I have been looking also. Have not found anything to even mention. I used to have it on my old MinMo phone, but that's the ONLY damn thing I miss about it. Anyone have a recomendation.
theres a bunch of cheap A2DP headsets at dealextreme.com just do a search for a2dp
But I do mean cheap dont expect miracles for sound quality or battery life . . . but did I mention cheap?
We're not trying to solve our problems by purchasing MORE hardware, we're trying to make do with what we have and find new uses for old stuff. We want to send ALL the audio from the device to a mono NON a2dp earpiece. It can't honestly be that hard, Please devs. And don't forget your donate buttons.
Sound Route Switcher
http://www.androlib.com/android.application.com-omercade-headsetprojectii-jmiw.aspx
shadow_empire1 said:
Sound Route Switcher
http://www.androlib.com/android.application.com-omercade-headsetprojectii-jmiw.aspx
Click to expand...
Click to collapse
This is not working for me, and I have 3.0. Doubt that 4.0 is working on the G1.
Hello!
Sorry to up this "old" topic, but I'm a biker too and i have a scala rider Q2 bluetooth device. This device does not support the bluetooth A2AP x-(
The phone calls trough bluetooth is ok but no music or GPS....
I found a solution : Bluetooth Audio Widget (i could not post the link but you can find it on the android market)
This Widget/application route all the sounds from your device to the bluethoot headphones!
@++
I have been using "Super BT Mono Pro" on my T-Mobile G2. It is working better than a few of the other apps that I have tried. It is also available on the Market.
http://www.androidzoom.com/android_developer/sinwidget_itzo.html
How do you like that Q2? Does it work well on FM, or is its radio coverage spotty like the other units? I still think they have awesome audio when you are talking to someone. I gave up the Scala Rider FM for a Parrot SK4000.