Hi
Been searching for a way to disable the auto exposure feature when the camera is used in dark scenes. Any registry mod to turn this off?
Sorry if it's been posted before, but I've searched this forum for shutter, exposure etc and have not found any reference to it.
I know the Diamond camera quality is terrible, but would be nice to trade blur pictures with dark but sharp pictures.
Actually diamond camera isn't terrible. It's just bad when doing photos in the dark, like every camera without flash.
it would be worthwhile to have a fixed focus as an option...similar to the landscape modes in digital cams where u just point n click without focusing
of course, the focusing works great in the diamond...but sometimes u might want to take a pic very quickly without waiting for the focus to kick in
also in situations where u want the background and foreground to be equally focused
not sure if there's any reg tweak for this
Is there a tweak for quicker exposure? Everytime i try to take a pic of my baby its always blurred or she's looking the other way by the time its taken the pic!
nokmond said:
Is there a tweak for quicker exposure? Everytime i try to take a pic of my baby its always blurred or she's looking the other way by the time its taken the pic!
Click to expand...
Click to collapse
Do as i do, remove the sound of the shutter, take the picture and only say after
"Get ready ... 1...2...3! ok"
"ah.. but i wasnt ready..!?"
"Its good believe me "
IN advanced config you can set shutter to 0 seconds?
maybe this will help
http://forum.xda-developers.com/showthread.php?t=406442
anyone working on a fixed focus??
someone try this please!
Better Quality
Hi, To improve the quality on my phone i removed the back cover and popped the plastic cover on the back case. Wooow the quality is fantastic after that.
Only downsize is you have to be careful in cleaning the lens. A bit of a clean from your shirt or top does the trick
Related
if there is slight movement the pictures and film is blurry. any fix for this?
romagnus said:
if there is slight movement the pictures and film is blurry. any fix for this?
Click to expand...
Click to collapse
yeah ... hold your hand steady .. Lol unfortunately not really as far as i know. The kaiser suffered from the same problem.. a slight movement and the picture goes blurry.
romagnus said:
if there is slight movement the pictures and film is blurry. any fix for this?
Click to expand...
Click to collapse
remove the back cover before taking pictures. you'll be surprised!
KukurikU said:
remove the back cover before taking pictures. you'll be surprised!
Click to expand...
Click to collapse
on the dia100 you can remove the plastic lens on the battery cover. makes a good difference, but doesn't help with movement. i would like to know if you can adjust the shutter speed. i know nothing of how cameras work, but assume that would help with streaking/blur.
That's the kicker! If we can adjust shutter speed then all would be fixed. I own a few SLR and DSLR cameras and shutter speed changes everything, you can even make ghost pictures! could some one write a cab file for this? I am no programmer.
If you reduce the shutter speed then the picture will be too dark.... it stays open that long for a reason.
If you use the camera in daylight its 'fine' its becasue the apature/lens is soo small it cant get enough light... hence it has to stay open longer.
Try changing the settings (white balance) to see if that helps you.
If you use advanced config to get rid of all of the lag before the photo is taken and change the settings within the cameras white balance to something better (the 'light bulb' one works well) it shouldn't be too bad.
By simply changing the brightness level to -2.0 you will no longer have a blur - it's like changing the ISO on a camera and the FPS will jump by over 50%. check it out in full here: http://www.fuzemobility.com/decrease-the-blur-of-your-camera-really/
Hey thanks for that tip, works a treat, now can take pictures in low light a lot better...
yes, this makes a positive difference!
thanks that has made a big different to mine
cobbs said:
thanks that has made a big different to mine
Click to expand...
Click to collapse
glad I could help
THUDUK said:
Hey thanks for that tip, works a treat, now can take pictures in low light a lot better...
Click to expand...
Click to collapse
Good tip!! +1
What you are doing is shortening the shutter speed / exposure time in the camera thus you get the frame increase. It's not the camera app lagging or anything.
If shutter/exposure was set to auto and you try to take pictures in a dark room it gets slow as the camera needs to compensate and take more time to collect the light to make a viewable image.
So don't go thinking this is a bug or anything
ecidemon said:
What you are doing is shortening the shutter speed / exposure time in the camera thus you get the frame increase. It's not the camera app lagging or anything.
If shutter/exposure was set to auto and you try to take pictures in a dark room it gets slow as the camera needs to compensate and take more time to collect the light to make a viewable image.
So don't go thinking this is a bug or anything
Click to expand...
Click to collapse
I agree - if they just stated that brightness = shutter speed I think we all would have changed it. Instead, it sounds more like saturation (just software chanes and not frame rate). It's not a bug but it is something that's not obvious to the end user and changing this setting has a huge difference in low light settings.
no its not a bug, but its bad engineering.
It was embarrassing to me as an owner of a $700 phone.
Great tip +1
Thanks!
can anyone post some sample images? I'd like to see what my 'soon-to-have' diamond will be able to do with some tweaking
there are some non hi-res photos here: http://www.fuzemobility.com/got-yellow-photos-fix-it/
here's a 7meg panaramic photo: http://forum.xda-developers.com/showpost.php?p=3123629&postcount=12
The Touch Pro/Fuze/Diamond have almost identical hardware (except for the keyboard of course)
hm, not too spectacular :/
no samples with the fix from this thread?
e fix merely ensures that there are no blurs in your photos - not that they are better photos. The camera is a 3mp camera and it's pretty good in fact. Let me see if I have any photos that are friendly on my phone But this fix doesn't make photos better - it solves a problem with the camera (and many camera phones) by reducing the blurriness you often get from movement.
Take a look here: http://forum.xda-developers.com/showthread.php?t=448093
ah, cool thx dude
it's good enough for a little phone like the diamond
I have been very dissapointed with the performance of the X1 camera even after installing the R3 cab. It was imposiible to capture anything that moved because by the time it took the photo my subject had left the vicinity lol.
Following the advice of another poster (sorry, cant remeber who but thanks) I set my focus to infinity. Now, I can take full 3mp, fine quality pics, use the zoom function and capture crisp, clear images...even when the subject is moving. This combined with Resco Photo Viewer has been the final missing piece of the X1 jigsaw.......forget the X2 Ill now keep my X1 for as long as I can
Hah, I will check this out than!
Nice advice, works flawless! The pictures are not shaken anymore...
But tell me: how do you zoom? Does the x1 have the option to zoom?
Cheers
Zooming
Use the volume up and down button. Didnt work with 3mp and auto focus but works a treat now!!
just remember there is no optical zoom only digital zooma, so the more you zoom the worse the picture.
Well, even with infinity focus I can't zoom in 3mp mode. It says "cannot zoom in this quality mode". Man. Do you guys use R3A or has it nothing to do with it. Or is there a newer camera program?
oTToToTenTanz said:
Well, even with infinity focus I can't zoom in 3mp mode. It says "cannot zoom in this quality mode". Man. Do you guys use R3A or has it nothing to do with it. Or is there a newer camera program?
Click to expand...
Click to collapse
Yes, have installed R3A cab so maybe that's the difference with the zoom function. Well worth doing as it also has auto flash and GPS functionality.
You can zoom as long as the image is set to less than the max (3 mega pixels for the X1). Its always been like this on every WM and nonWM phone I've ever had.
i always thought infinity would be the worst option
thnx for the tip!
Still blurry indoors for me. Are y'all saying that this solves that issue for you? Only thing that works to get rid of blur for me is to change to action mode and keep flash on, but pictures are still pretty dim.
ring-bearer said:
Still blurry indoors for me. Are y'all saying that this solves that issue for you? Only thing that works to get rid of blur for me is to change to action mode and keep flash on, but pictures are still pretty dim.
Click to expand...
Click to collapse
The infinity "trick" doesnt effect the ability of camera to take good pics in poor light. It just lets you take good quality pics instantly rather than suffering the lag between button push and photo taken.
Sonus said:
You can zoom as long as the image is set to less than the max (3 mega pixels for the X1). Its always been like this on every WM and nonWM phone I've ever had.
Click to expand...
Click to collapse
I have my camera set for 3mp and fine quality, have just double checked and it seem that with the R3A cab installed the zoom function is available with all of the focus options.
hey thanks for the advice, it really helps.
biernes_atrece said:
i always thought infinity would be the worst option
thnx for the tip!
Click to expand...
Click to collapse
As a photographer I can hopefully shed some light on this - the percieved 'shutter lag' that most people experience on consumer grade cameras and cellphone cameras has nothing to do with shutters (actually nearlly all of these don't have shutters, but 'hot' shutters where the imaging sensor is just sampled for 1/x seconds), but to do with focus acquisition. On a DSLR, focus is performed using phase-detection using a seperate and extremely quick method (also hence why DSLRs have reflex mirrors).
On cellphones, where there's a far smaller sensor, and no room to beamsplit with mirrors, autofocus is done by measuring contrast on the main sensor, focus is moved in increments from MFD to Infinity, contrast of the image measured, until the sensor detects the maximum available contrast, then focus locked at that point. Because this has to essentially traverse the entire focus range (which admittedly isn't that huge), and is performed on a small sensor with fairly low contrast, the process isn't fast. It is decently accurate though.
By setting the focus to Infinity, the camera doesn't focus, as focus is just fixed at the further possible focal point. This would usually present an out-of-focus issue, (and it still would), but due to the depth of field relationship to sensor size, a camera with a small sensor has a large given depth of field, and, the hyperfocal (the point after which all distances are in acceptable focus) is relatively close, and the depth of field at infinity also encompasses a large slice of distance. Because of this, a large amount of the image will always likely be in focus, especially for stuff that's not right in front of the camera, and the delay of focusing is eliminated, so when you hit the shutter release, the photo just takes, and it's likely in focus just fine
flashpanda said:
As a photographer I can hopefully shed some light on this - the percieved 'shutter lag' that most people experience on consumer grade cameras and cellphone cameras has nothing to do with shutters (actually nearlly all of these don't have shutters, but 'hot' shutters where the imaging sensor is just sampled for 1/x seconds), but to do with focus acquisition. On a DSLR, focus is performed using phase-detection using a seperate and extremely quick method (also hence why DSLRs have reflex mirrors).
On cellphones, where there's a far smaller sensor, and no room to beamsplit with mirrors, autofocus is done by measuring contrast on the main sensor, focus is moved in increments from MFD to Infinity, contrast of the image measured, until the sensor detects the maximum available contrast, then focus locked at that point. Because this has to essentially traverse the entire focus range (which admittedly isn't that huge), and is performed on a small sensor with fairly low contrast, the process isn't fast. It is decently accurate though.
By setting the focus to Infinity, the camera doesn't focus, as focus is just fixed at the further possible focal point. This would usually present an out-of-focus issue, (and it still would), but due to the depth of field relationship to sensor size, a camera with a small sensor has a large given depth of field, and, the hyperfocal (the point after which all distances are in acceptable focus) is relatively close, and the depth of field at infinity also encompasses a large slice of distance. Because of this, a large amount of the image will always likely be in focus, especially for stuff that's not right in front of the camera, and the delay of focusing is eliminated, so when you hit the shutter release, the photo just takes, and it's likely in focus just fine
Click to expand...
Click to collapse
Thanks for the mini lecture. I've been trying to get good bokeh/DOF blur on my X1 and K850, this helps in telling me which settings to focus on (no pun intended)
harveydent said:
Thanks for the mini lecture. I've been trying to get good bokeh/DOF blur on my X1 and K850, this helps in telling me which settings to focus on (no pun intended)
Click to expand...
Click to collapse
Heh, you're welcome. If you're trying to get narrow DOF/bokeh effects on your X1 and K850, I'm afraid to say you're pretty much out of luck, the (tiny) imaging sensors on phones leads them to have a very large depth of field at any given aperture. Your best chances for getting the smallest depth of field and best bokeh possible is to have a subject extremely close to the X1, focus near, and have the background seperated and relatively far away.
flashpanda said:
Heh, you're welcome. If you're trying to get narrow DOF/bokeh effects on your X1 and K850, I'm afraid to say you're pretty much out of luck, the (tiny) imaging sensors on phones leads them to have a very large depth of field at any given aperture. Your best chances for getting the smallest depth of field and best bokeh possible is to have a subject extremely close to the X1, focus near, and have the background seperated and relatively far away.
Click to expand...
Click to collapse
That's what I do, actually I usually include a secondary subject in the background to make the DOF blur easily appreciated.
Plus, I have a modded camdriver for the k850 which allows manual focus. No luck finding one for the X1, though.
Thanks Crank1.
I was getting peeved about the quality of the pics and the lag.
No I get perfect pics every time! (well for a phone camera)
manual focus would be so awesome
hi all,
im not able to understand why all the pictures taken by my Xperia are hazy..... even in daylight. please see the attached images for sample. which are taken in different lighting conditions, in "Auto" settings.
Bright Outdoor:-
, Sunny:-
, Indoor :-
i tested almost every settings but all reproduces the same, where as Xperia is quite capable of taking quality pictures (http://www.flickr.com/groups/xperia/pool/)
Im using the stock ROM, with stock camera software.
i tried the instruction in the threads (http://forum.xda-developers.com/showthread.php?p=5087670#post5087670 & http://forum.xda-developers.com/showthread.php?t=577364) but not able to solve my problem.
The Quality of video is good & i don't have any problem with that.
I might be missing some setting in Still image. can some one guide me or share their settings to get bright & vivid images.
netant said:
hi all,
im not able to understand why all the pictures taken by my Xperia are hazy..... even in daylight. please see the attached images for sample. which are taken in different lighting conditions, in "Auto" settings.
Bright Outdoor:-
, Sunny:-
, Indoor :-
i tested almost every settings but all reproduces the same, where as Xperia is quite capable of taking quality pictures (http://www.flickr.com/groups/xperia/pool/)
Im using the stock ROM, with stock camera software.
i tried the instruction in the threads (http://forum.xda-developers.com/showthread.php?p=5087670#post5087670 & http://forum.xda-developers.com/showthread.php?t=577364) but not able to solve my problem.
The Quality of video is good & i don't have any problem with that.
I might be missing some setting in Still image. can some one guide me or share their settings to get bright & vivid images.
Click to expand...
Click to collapse
Well I'm not sure.
But once I experienced some effect of this kind and was surprised too.
Than I looked at the camera eye cover
and observed that this invisible cover is scrached.
And discovered that the camera eye cover has a little invisible
layer on. So I removed this by strong scraching with a cloth.
Once I removed this layer and made the cover clean again
I never experienced this problem again.
As for settings - I almost always use Sports mode
which gives crisp and sharp photos..
Touch zoom works great with far/close object effect.
Usually I have unfinished ∞ zoom
or automatic.
doministry said:
As for settings - I almost always use Sports mode
which gives crisp and sharp photos...
Click to expand...
Click to collapse
Thanks for your reply, but my problem is not related to shutter-speed or grainy thingy...
my problem is about the colors & brightness, i noticed the moment i click the image an additional amount of brightness has been added to the image before saving.
Please see this image to know my problem better.
See the unwanted glow around bright / white objects
netant said:
Thanks for your reply, but my problem is not related to shutter-speed or grainy thingy...
my problem is about the colors & brightness, i noticed the moment i click the image an additional amount of brightness has been added to the image before saving.
Please see this image to know my problem better.
See the unwanted glow around bright / white objects
Click to expand...
Click to collapse
---------------------
I think you may have the problem described here - http://forum.xda-developers.com/showthread.php?t=493732
I had the same issue - disappeared on it's own after a week or two...
I still believe it's just a lens problem,
where camera sensor badly interprets visual input.
Remember it's a DIGITAL camera,
so all the light/picture information is digitally interpreted.
There's nothing optical about it...
photo quality is good of my xperia....may be brightness control (adjusted through keys around dpad, up down ) may be high or the camera is in multishot in shoot mode...just a guess...
Hazy pictures
I had the same problems, my lens was scratched from dust and other...
I polished it with a Display-Polish (you get it in a cellular accessory store, or search at amazon for displex) and the pictures are nice and clear again.
But take care: Don't use it on the Touch-Screen!!!
Just dirty from sweat and/or greasy hands. Just wipe it of. But depends on how long has it been there. You probably need few minutes to clean it. Mine was exactly the same
I have the same quality of pictures too...
ai think most of you guys don't get the situation... becuase i also experience the same issue..
when in viewfinder mode (when just about to take a picture. you know, the part where you are hunting and focusing on your subject), the picture quality is great. no smudges, the light balance is ok and the focus is just right.. but when you press the shutter button and it takes the picture, it like suddenly gets another hazy layer of over-exposed fog above your view finder preview.
as stated as well by the thread opener, the video quality is good.
if it is something to do with dirt and/or smudges on the camera's lens or lens cover, surely you would see the haze and the bad quality on all camera related stuff, including viewfinder mode and video. as another note, i have the HTC camera installed in my rom and it doesnt do the hazy, over-exposed picture on it..
ai think most of you guys don't get the situation... becuase i also experience the same issue..
when in viewfinder mode (when just about to take a picture. you know, the part where you are hunting and focusing on your subject), the picture quality is great. no smudges, the light balance is ok and the focus is just right.. but when you press the shutter button and it takes the picture, it like suddenly gets another hazy layer of over-exposed fog above your view finder preview.
as stated as well by the thread opener, the video quality is good.
if it is something to do with dirt and/or smudges on the camera's lens or lens cover, surely you would see the haze and the bad quality on all camera related stuff, including viewfinder mode and video. as another note, i have the HTC camera installed in my rom and it doesnt do the hazy, over-exposed picture on it..
ytsejam_ said:
ai think most of you guys don't get the situation... becuase i also experience the same issue..
when in viewfinder mode (when just about to take a picture. you know, the part where you are hunting and focusing on your subject), the picture quality is great. no smudges, the light balance is ok and the focus is just right.. but when you press the shutter button and it takes the picture, it like suddenly gets another hazy layer of over-exposed fog above your view finder preview.
as stated as well by the thread opener, the video quality is good.
if it is something to do with dirt and/or smudges on the camera's lens or lens cover, surely you would see the haze and the bad quality on all camera related stuff, including viewfinder mode and video. as another note, i have the HTC camera installed in my rom and it doesnt do the hazy, over-exposed picture on it..
Click to expand...
Click to collapse
Like I said - first try it, then write Mine had also great videos. Why? Well not hard to find out
And yeah, the lens seemed also OK to me.
Like I said - try to clean it first. Otherwise it's pointless to write here and complain, coz nothing else can fix it Had this on my Qtek 8310, 8500, W910.. Know what I am talking about
Mine takes great pics in automatic mode, I have not done anything in the settings. I am using R3 camera.
http://www.aijaa.com/v.php?i=5676896.jpg
http://www.aijaa.com/v.php?i=5676911.jpg
http://www.aijaa.com/v.php?i=5676914.jpg
http://www.aijaa.com/v.php?i=5676917.jpg
Must be the lens..
Has anyone found a solution for the lag/motion blur when taking photos? Stationary shots are fine, but any movement of the subject and it's likely to blur, even in reasonable light. On top of this is the clear delay between pressing the button and the photo taking (motion picture does help with this slightly but still not ideal).
GCAM appears to be able to take quick shots with less blur, so I feel like it's not a hardware limitation? I would stick with gcam but obviously lacks the depth of shooting options of the stock camera
Aware pro mode could be used but I feel like auto should do the job well enough
mtm1401 said:
Has anyone found a solution for the lag/motion blur when taking photos? Stationary shots are fine, but any movement of the subject and it's likely to blur, even in reasonable light. On top of this is the clear delay between pressing the button and the photo taking (motion picture does help with this slightly but still not ideal).
GCAM appears to be able to take quick shots with less blur, so I feel like it's not a hardware limitation? I would stick with gcam but obviously lacks the depth of shooting options of the stock camera
Aware pro mode could be used but I feel like auto should do the job well enough
Click to expand...
Click to collapse
Anyone?
it's a samsung thing. i have never had a samsung that did not do this. GCAM is a decent work around though. some people try the live picture setting, others try taking video and screenshotting the frame they want, there is a noticeable loss in quality doing that though.