Im trying to flash my t-mobile wing and i keep getting an ERROR (270) Update Error? I have flashed rom before and it worked then went back to original t-mobile rom. I want to try a new rom, i did the exact same sets i did before but i keep getting 270 error?? Can anyone tell me what im doing wrong?
Thanks
what rom did you flash before?
what is your IPL/SPL?
what rom are you using now?
welcome to xda-devs
open touch v6.1 diamond SPB
ipl 4.10 spl 4.10
RUU Atlas TMO_US 4.10.531.3
I assume you used USPL to flash Open touch?
try flashing this RUU
http://www.mediafire.com/?clvw3cvyclo
it's newer than 4.10 and evidently the newer IPL and SPL give your device a "kick in the pants"
Hi,forgive me if this question is redundant,but,can you flash a custom rom with this tool.I have the 3.11.3.0 htc ruu.and I have the nbh.file of the rom I want to flash inside the folder with the ruu. the bat.exe.and dll.files that came with it.Really 2 seperate questions.The 2nd being is this correct.I'd rather measure twice and cut once.Any help on this first flash atempt would be great.Thank's
ok i flashed the newer tmo ruu and it worked then i tryed to to flash the open touch rom and it gave me the same 270 error? it gets to 3% then errors out? whats the deal?
Demize- you can not flash because your device is not cid-unlocked. none of ours are. You should use the USPL to flash the .nbh file that you wish.
Alaricmucino- Are you using USPL to flash or are you using the RUU that came with the rom?
Both of you- read this
http://forum.xda-developers.com/showthread.php?t=358615
Thank you fzzyrn for your reply.Believe me I've read it,over,and,over again.But until you do it it can be a bit confusing for a noob.I'm gonna go over it again.I think I got it though now.
Related
is there anyway to "shelltools" flash my radio rom? I've been missing a lot of calls lately and it really is becoming inconvenient. I havent unlocked my phone, but i am running wm6 using shelltools (mfrazzz's stuff) and i was wondering do i even need to have my phone unlocked to flash my radio? i dont want to lose my warranty so thats why this matters to me. Any ideas guys?
You may get the official (in your case, T-Mobile, I guess) ROM to flash your phone with the full set of WM5 ROM (e.g. IPL, SPL, OS and Radio). As you are using the official ROM, you do not have to CID-unlock your phone prior flashing this official ROM. After that, you may then use shelltool to update/upgrade/flash the WM6 in, while the radio is untouched (e.g. still using the one you've flashed with the official ROM).
i thin i have done what you said already. Before i flashed mfrazzz's wm6 rom i flashed the latest tmobile rom, then i proceeded to flash the wm6 rom. I didnt use shelltools to flash the official tmobile rom obviosuly, but i did use shelltools to flash mrazzz's wm6 rom.
these are my things from what i'm using now:
ipl 2.26
spl 2.26
gsm 02.25.11
os 2.18.0.0
Flash the t-mobile uk radio rom 2.19.11.. that'll work for u.
ur OS is wrong if ur running wm6...
2.18 is Crossbow Reloaded... or Faria's..
Madcap180 said:
Flash the t-mobile uk radio rom 2.19.11.. that'll work for u.
Click to expand...
Click to collapse
can i just flash that right now without being unlocked? i'm in boston, does that matter? lol
Madcap180 said:
2.18 is Crossbow Reloaded... or Faria's..
Click to expand...
Click to collapse
oh, my bad then lol.
and yes u can change ur radio without being unlocked
ok thanks guys for all the help, but i still have a couple small questions
first, in this post http://forum.xda-developers.com/showthread.php?t=253609&page=4
(post #34) he says that if you dont cid unlock before applying the radio rom you will brick the phone.
next im looking for that uk rom, but i really cant find it, can anyone point me in the right place? and even though im in the US it will still work right?
thank you guys so much! i really aappreciate it
There you go
jawnsixteen said:
ok thanks guys for all the help, but i still have a couple small questions
first, in this post http://forum.xda-developers.com/showthread.php?t=253609&page=4
(post #34) he says that if you dont cid unlock before applying the radio rom you will brick the phone.
next im looking for that uk rom, but i really cant find it, can anyone point me in the right place? and even though im in the US it will still work right?
thank you guys so much! i really aappreciate it
Click to expand...
Click to collapse
I have flashed my RADIO ONLY several times with no consequences for my CID LOCKED G4 Wizard, here´s the link for the RADIO ONLY
ftp://xda:[email protected]_Thread/T-Mobile-UK_2.19.11_Radio_Only.zip
You have flashed RADIO only on you G4? HOW? I am having the following problem:
I had to flash a T-Mobile German ROM to use the shelltool for the latest WM6 ROM, it worked but unforunately I have got Radio 2.69 and IPL 3.08.XXX1. (from the latest official MDA Vario ROM flash before)
After the Hardreset everything went fine - I've got WM6, but after i had changed the Clock settings and restarted my device i simply have NO SIGNAL anymore. I am currently in australia maybe thats the reason???
I tried to install the offical T-Mobile AKU 2.0, but the RUU shows me error 296 as I have installed a later ROM AKU3.3 bevor my WM6 flash.
Which tools have y used? And how is the procedure?
Cheers!!!
irm
4irm said:
You have flashed RADIO only on you G4? HOW? I am having the following problem:
I had to flash a T-Mobile German ROM to use the shelltool for the latest WM6 ROM, it worked but unforunately I have got Radio 2.69 and IPL 3.08.XXX1. (from the latest official MDA Vario ROM flash before)
After the Hardreset everything went fine - I've got WM6, but after i had changed the Clock settings and restarted my device i simply have NO SIGNAL anymore. I am currently in australia maybe thats the reason???
I tried to install the offical T-Mobile AKU 2.0, but the RUU shows me error 296 as I have installed a later ROM AKU3.3 bevor my WM6 flash.
Which tools have y used? And how is the procedure?
Cheers!!!
irm
Click to expand...
Click to collapse
No, we can´t flash a ROM with bootloader other than the one you have if you have a G4 CID locked device. Unless you use a RUU with no ID (see next paragraph) and the nb.nkf file lacks of IPL/SPL, such is the case of the Wizard Love which I use before to flash any other ROM with the Shell Tool.
Read post #2 of this thread
http://forum.xda-developers.com/showthread.php?t=310954
Read carefully where talks about Splash Screens and Splash Only RUU for G4, same procedure for splash screen applies to RADIO. This doesn´t work for OS, for OS you have to use Shell Tool.
Good luck!
Sorry for Offtopic but, i cant install official wm5 rom cause.
The ruu with wm5 doesnt work> connection error
The .nkb doesnt work with ruu mun> file read error
What to do???
LOLOLOLOL
Are you sure it is .nkb? Wizard doesn't use that kind of ROM...
What?? Of course he uses. I extracted the RUU and rom file from .exe instaler.
What could i do? I tried also flash it with softspl and i didnt work.
Well,which rom you are trying to flash and which rom is at present running on the phone,plz be specific ?This problem usually occurs when trying to flash a rom in a language different then already present on the phone.Are you running a Russian or some other language OS on the phone and trying to flash with a rom in some other language ?
zabardast_1 said:
Well,which rom you are trying to flash and which rom is at present running on the phone,plz be specific ?This problem usually occurs when trying to flash a rom in a language different then already present on the phone.Are you running a Russian or some other language OS on the phone and trying to flash with a rom in some other language ?
Click to expand...
Click to collapse
I have T mobile mda vario g4 and i want to install official wizard wm5 rom in german language. And i cant.
No i am running wm6.1 with english language. I had never, after the hardspl, problem with flashing g4 roms. Everithing worked perfect with muunˇs RUU.
I have english rom( all instaled roms were anglish) and i want to downgrade to official wm5 german rom. And tzhen upgrade to another wm6 or wm6.1 rom.
Why i cant??
Sorry. U are right. The rom file is. nbf , and yeah the official rom is like that.
If i try to flash it with ruu in official pack - i cant cause wrong update tool ( no connection)
And if i want to flash this official rom with munn ruu - file read error( something wrong with .nbf file)
sry, double post
and thanks for helping me out
Ok,I got your point. You are at present on wm6.1 latest custom build rom in english and you want to go back to your phones official wm5 rom,ok ?
Right,well,as you have done 'HardSPL' your phone and its IPL/SPL is patched to IPl 2.21.0001 and SPL 2.21.olip,right ?
ok,now as you have patched to ipl 2.21.0001 & spl 2.21 olip through 'HardSPL',its not possible to revert back to official rom,untill you remove the 'HardSPL' from your phone and flash the original/official IPL/SPL of your phones carrier Rom bootloaders.After only removing HardSPL and getting the official ipl/spl,it'll will be possible to flash the official wm5 rom,ok
Now,how to remove 'HardSPL', read and follow the method as instructed in the 'Sticky' in the G4 forum by dharvey "How To: Remove HardSPL"
Well,then again,if you want to upgrade to another wm6 rom,you'll have to either again use 'HardSPL' or 'SoftSPL',but,if at all,you want to flash with another wm6 rom,then why first downgrade to wm5,why not straight away flash the rom while with HardSPL still on the phone ?
Cheers!
Yeah, everything is soo as u wrote.
you: why not straight away flash the rom while with HardSPL still on the phone ?
I have very strange problem with wm6.1 rom that i would like to use, until the new paradox rom will come out. i will try it for sure.
U can read about problem in wm6 subforum in windows Mobile 6.1 slim editon thread.
So do i have any option unless to remove hardspl?
u are the king , i wouldn come in weeks to the "please remove hardspl, " solution. hahahaha thanks again
Ok, thanks
well,if you got a problem with the wm 6.1 slim,then just flash another wm6.1 latest rom e.g by 'it's right' 'TNT 19199 series Professional Rom' as I have personally used it and found it to be an excellent rom,without removing HardSPL and reverting back to official wm5 rom.Just give it a try,I'm pretty sure you'll like it and may sove all your problem,as it'll replace all the rom files of the previous wm6.1 slim rom.
Cheers!
Tooo late. hehe
To remove the hardspl u need 2 minutes. I removed it and tried to instalruu_vario_aku3.3_3822_382120_026911_tmo_de_ger_ship
Again once again i get the message from ruu = error file read.
Could somebody open that rom and look for problems.
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
First one on the site.
Right now i want to flash another official rom( from remove hardspl thread http://forum.xda-developers.com/showthread.php?t=342744) and it say again file read.
What could that mean??
EDIT:
I just succesfully instaled ruu_vario_aku3.3_3822_ rom with ruu in the rom` folder. I tried also the T-Mobile MDA Official WM5 Rom (old) with his ruu and it didnt worked. Also softspl didnt work on both roms.
I need quick answer
now i flashed wm5 rom aku 3.3 and the ipl/spl changed to 3.08 . Before was 2.26 which i got with instaling ipl/spl pack.
Is that bad for g4 with ipl/spl 3.08 , is it safe to install wm6.1 roms?????
Hi guys, I have an HTC wing and so far all the official RUU images I have give me that error message when trying to install them, currently have the Touch IT v 2.xxx
IPL and SPL are both higher than 4
Aby ideas?
i think u need to do hardSPL first. Then you can flash *ANY* suitable flash
then the error is that I got a Wing device and the update tool is looking for a Herald, anyone knows where can I get a RUU image for my Wing?
if you want to reflash an official rom, choose the appropriate rom from the xdadevs ftp site
if you want to flash a custom rom, use either USPL or HardSPL. look in the "Herald Mobile 6" or "Herald Rom Development" forums
Hey Guys,
sorry, I´m searching the whole time after how to flash just an spl, for an extracting I used the NBH util.
My plan:
1) I want to flash my O2 branded Diamond, without flashing a hardSPL.
2) As I understood, it´s possible just to extract an SPL from the newest HTC rom, and flashing this with DiamondCustomRUU in the first step.
3) After this I should have the possibility to flash a full HTC Rom?
Are there any misunderstandings? because I can´t flash the extracted SPL with DiamondCustomRUU.exe.
What did I wrong, and what should I do?
Cheers, Chris
No one any idea???????????????????????
it might be possible to do this!
but you have to be careful not to get device ID/version different on both the OS or the SPL!
but why not just put hard spl and then revert back to stock SPL when you want to at a later stage! all versions of the stock SPL are availble on the rom developement forum
can anyone give me a step by step on how to flash my ROM back to STOCK?
if you want it for warranty reasons then you will need to flash the SPL also to stock. you can just download the latest ROM from HTC website and flash it. it will give you the stock ROM on the existing SPL.
End of the post http://forum.xda-developers.com/showpost.php?p=2710548&postcount=1.
Remember you will also need to go back to stock spl if for warranty purposes.
i have another problem, when in bootloader it wont change from serial to usb but was a week ago
7896zx said:
i have another problem, when in bootloader it wont change from serial to usb but was a week ago
Click to expand...
Click to collapse
nevermind what i said there, for sum reason it works again now
I've kinda got thesame question. I flashed a stock rom (latest EU rom from HTC site), then stock SPL (1.14) and then the stock rom again. Is this enough to be able to claim warranty without HTC finding out about custom roms/boatloaders?
Thanks
accountabc said:
I've kinda got thesame question. I flashed a stock rom (latest EU rom from HTC site), then stock SPL (1.14) and then the stock rom again. Is this enough to be able to claim warranty without HTC finding out about custom roms/boatloaders?
Thanks
Click to expand...
Click to collapse
That depends. What was your original rom and spl? Are you entitled (via location) to use the new EU rom, eg if you live in America then this may not be acceptable to HTC.
When you boot up the new rom, are the screen colours ok as this will tell you if you have the right spl for your rom? If you have the latest EU rom, I doubt that 1.14 spl would be the right one, but it could be I guess. With the stock rom, you should also get the stock radio. So provided you have the stock rom available to your area, with the correct matching spl and the radio, there is no way to tell of your exploits
Thanks for your reply
The problem is that the screen of my device won't turn on anymore (Device powers on, I can connect with activesync, digitizer works fine) so i have no way of checking if I have the right SPL or not...
I also have no idea what my stock rom/spl/radio version was.. I live in the Netherlands, and through the official HTC site i flashed the latest rom, which included a radio (a radio version was part of the filename). What I'm trying to find out is:
Could 1.14 have been my stock SPL, or was that version never used on any Dutch Blackstone?
If the spl doesn't match the rom (wrong colours) that isn't much of a problem; I can tell them I tried to update my rom because I thought maybe my screen would work again after I installed the latest ROM... But if I have a SPL that was never even used I don't think they will buy that
According to the wiki there are 2 Dutch roms - one would require a 1.14.0000 spl and the other a 1.54.0000 spl. So I guess either of those would do.
When you flashed the rom from the website, where you still using hspl or uspl? Depending on the rom you flashed you will need to flash the matching spl. Do you have the full notation/naming of the rom you flashed. This should give an indication of which spl you will need.
As much as I appreciate ClydeB1 for assisting you, I fail to see a reason for this thread. A thread already exists for flashing advice, i.e. the dummies guide. Also the HardSPL thread exists and has advice on how to flash back to stock. So depending on your query post in either of these.
The initial query and reason this thread was created has been answered, so no need for this thread to remain open. Thread closed