I saw the following url
http://pdadb.net/index.php?m=specs&id=1387
on PDAdb listed as new for Kaiser 140, describing what in essence is the existing Kaiser. I searched this forum for any relevant terms and cannot find anything about it. Is this a new version? Has anybody heard of it?
It is also posted on the main front page of PDAdb.net:
http://pdadb.net/index.php?m=main
You'd probably get more of a response if you posted this in Kaiser general, especially since this isn't software related...
Added UMTS 1700?
That must mean it's for T-Mobile US. I heard T-Mobile was supposed to be getting the Kaiser. and their 3G is 1700 band(in case you didn't already know).
I wonder if that means us AT&T people could buy one and use it roaming on TMO's 3g network.
My apologies for posting in the wrong place! I usually check only the software section, it did not occur to me.
As for cellular networks, they llist GSM850, GSM900, GSM1800, GSM1900, UMTS850, UMTS1700, UMTS1900, UMTS2100.
cbass said:
I wonder if that means us AT&T people could buy one and use it roaming on TMO's 3g network.
Click to expand...
Click to collapse
I wonder if this means it has an updated hardware radio transceiver, and the rest of us are out of luck?
Would this mean there is no way to actually get 1700 through a radio flash like how Emobile's radio works on the current Kaiser without locking it to 1700MHz only, and flashing a Kaiser radio to Emobile won't give it 850/1900/2100?
I don't know, but I'd sure like to see a date on its availability and make sure those specs are real-- I travel a lot to Japan, and I want to switch to T-Mobile here in the states the second 3G gets turned on.
See, I'm with Sprint now but my contract is up September 1st. I'm supposed to be back in Japan sometime in October. My plan was to get the unlocked unbranded TYTN II from NewEgg and put it on T-mobile's flex pay plan until I leave. While I wouldn't have access to the 3G bands, T-Mo gives access to Wi-fi hotspots if you have a certain data plan, and I also have AT&T DSL service-- that gives me access to AT&T's Wi-Fi spots already. So I'm pretty much covered in most places if I need a faster conncection than EDGE.
In Japan, I'd just go with Softbank or Docomo--whichever is easiest to hook up the TYTN II to and keep SMS,MMS, and Internet to.
But after reading Emobile's plans on their site along with knowing T-Mobile USA will flip the switch on 3G on 1700MHz here in Atlanta soon... I may wait.
So will this actually support quad-band GSM/EDGE(850, 900, 1800, 1900) and quad-band HSDPA 3G (850,1900,1700,2100)?
starrwulfe said:
In Japan, I'd just go with Softbank or Docomo--whichever is easiest to hook up the TYTN II to and keep SMS,MMS, and Internet to.
Click to expand...
Click to collapse
Softbank. They're the only ones that support SIMs for rental. So so rates, but you could try to negotiate to a flat-rate plan.
Otherwise, you need to do full-contract w new phone, pull the sim, and then use it in the Kaiser. But why, since Japanese phones are so much better when you're there.
Related
Hello everyone! I'm wondering will this device work with AT&T service since it's just a triband phone, and, afaik, AT&T uses 850MHz as their primary frequency for GSM calls (depends on location) in NYC area.
Coverage maps are here:
http://www.gsmworld.com/roaming/gsminfo/cou_us.shtml
Specifically the 1900Mhz map is here and you can zoom in to your area and see: http://www.gsmworld.com/cgi-bin/ni_map.pl?cc=us&net=be
[You can probably also find them some place on the AT&T website.]
Be aware tho that the diamond only does 3G at 900/2100, but AT&T use 850/1900. That means you won't be able to use 3G capabilities on AT&T anywhere.
I would either wait for the american version, or buy the 2G one they're selling in india for ~200$ less.
Thanks, man! Maybe i'll look at T-Mobile plans, looks like device will work with them
Well looking at the page it looks like T-Mobile have even less 1900 coverage (GSM). I don't know their current 3G situation, but they will be/are using 1700Mhz for 3G, which the diamond can't handle either
I couldn't help myself. This phone seems perfect so i ordered a diamond that will arrive tommorow. Now my question is if anyone thinks the bands for US are present and need to be unlocked or if this will end up on ebay . Thanks!
There's several topics about it there.
You won't get any 3G in the US with it, and you'll only be able to use the 1900 band for voice/GPRS/EDGE.
Actually you are incorrect. 1900 Mhz is supported w/3G w/AT&T in certain areas. Unfortunately my Diamond is not even getting an EDGE connection. From what I am hearing the Diamond is only supporting 2100Mhz frequency w/3G according to HTC. Which to me makes no sense.. I am blogging my experience with it as it is the first production unit in the USA.
You just said i was incorrect and correct in the same paragraph lol
This is where all the confusion starts.. For GSM/GPRS/EDGE it does 900/1800/1900 MHz - only 1900 would work in the US. For UMTS (3G) it only does 900/2100 - neither of these frequencies are used in the US.
The protocols and modulation used are completly different for GSM/GPRS/EDGE vs UMTS. The dispersal of uplink and downlink frequencies is completly different. Just because it can do 1900 for GSM doesnt mean it should do 1900 UMTS.
mobilitytoday said:
Actually you are incorrect. 1900 Mhz is supported w/3G w/AT&T in certain areas. Unfortunately my Diamond is not even getting an EDGE connection. From what I am hearing the Diamond is only supporting 2100Mhz frequency w/3G according to HTC. Which to me makes no sense.. I am blogging my experience with it as it is the first production unit in the USA.
Click to expand...
Click to collapse
So why wouldnt I get Edge? I have had triband phones before i.e HTC 8525 that worked ?
mobilitytoday said:
So why wouldnt I get Edge? I have had triband phones before i.e HTC 8525 that worked ?
Click to expand...
Click to collapse
You should get edge. Edge is an extention of GPRS but requires a different BTS (radio tower) setup. Its possible you don't have a strong enough signal, but it sounds like your confident you should have edge in that area.
The only thing i can suggest it to try in a different area - like the centre of town. Also, confirm your APN is setup corectly, the [G] may just be telling you GPRS is available, but not that you can attach.
I know with my elfin it takes a little stronger signal to initiate the Edge icon the first time (ie. after a hard reset). I can't get an edge signal inside my office but once I walk outside for a minute or two, bam I have it. Then when I go inside I still have it.
mobilitytoday said:
Actually you are incorrect. 1900 Mhz is supported w/3G w/AT&T in certain areas. Unfortunately my Diamond is not even getting an EDGE connection. From what I am hearing the Diamond is only supporting 2100Mhz frequency w/3G according to HTC. Which to me makes no sense.. I am blogging my experience with it as it is the first production unit in the USA.
Click to expand...
Click to collapse
Diamond had UMTS(2100)+GSM(900+1800),UMTS(850+1900)+GSM(850+1900),UMTS(800+2100),UMTS(850+2100)+GSM(900+1800),UMTS(850)+GSM(900+1800) and UMTS(1700) depend what rom you had in your Diamond and where you bought your Diamond , At&T should be show 3G in US and T-mobile used 3G (1700 Mhz) in New York area
The platform in the phone can support all those bands, so you might be able to see them (like in the test rom) but the antennas are not there. So you won't actually be able to pick up a signal.
mwang said:
Diamond had UMTS(2100)+GSM(900+1800),UMTS(850+1900)+GSM(850+1900),UMTS(800+2100),UMTS(850+2100)+GSM(900+1800),UMTS(850)+GSM(900+1800) and UMTS(1700) depend what rom you had in your Diamond and where you bought your Diamond , At&T should be show 3G in US and T-mobile used 3G (1700 Mhz) in New York area
Click to expand...
Click to collapse
I guess all of us US early adopters must hope the hardware is there and can be enabled with a future flash.
T-mobile in the US uses 1900mhz for GSM/Edge and only has 3g in NYC, so I'm figuring that it's a cool stop-gap device until something is available for T-mobile 3G.
so anyone have the rom that had thoose bands....
confused
so im a little confused.... If I buy a diamond on ebay, it wont work in the US? or 3g just wont work? does the diamond accept a sim card?
On AT&T it will give you only GPRS! On Tmobile (NEW) it shows EDGE!! I dont understand this at all!
Praygo said:
so im a little confused.... If I buy a diamond on ebay, it wont work in the US? or 3g just wont work? does the diamond accept a sim card?
Click to expand...
Click to collapse
Voice and EDGE will work just fine as long as you are in a major area that uses 1900 band. You might have weak or no signal when you are in smaller rural areas since those usually extend into the 850 band.
You will not be able to use 3G since the Diamond only supports 900/2100, neither of which are used by AT&T
It looks like if you have ATT you are hosed for both voice and data, as most of ATT voice and data (Edge) is 850mhz. Most if not all of T-mobile voice-data-Edge is 1900mhz so you will have at least Edge. If you're looking for 3g data you're SOL until the US version of the diamond is released.
this fn blows htc has really screwed us here in usa...i was willing to spend 800 for this device and htc doesnt even see this? by the time it comes out here in quadband ...the x1 will be out and not mention the 3g iphone...oh well
martyotaku said:
this fn blows htc has really screwed us here in usa...i was willing to spend 800 for this device and htc doesnt even see this? by the time it comes out here in quadband ...the x1 will be out and not mention the 3g iphone...oh well
Click to expand...
Click to collapse
We will get the diamond, have to wait for the US version that does the different bands.... wich leads me to my next question. What carrier do you think will get the diamond??? AT&T seems to get all the cool stuff.
martyotaku said:
this fn blows htc has really screwed us here in usa...i was willing to spend 800 for this device and htc doesnt even see this? by the time it comes out here in quadband ...the x1 will be out and not mention the 3g iphone...oh well
Click to expand...
Click to collapse
I don't think HTC cares about America too much any more because it's iPhone territory. As they haven't used their own branding until recently, I think HTC are looking to gain market control and loyalty, and that's easiest where the iPhone hasn't been a huge success.
Praygo said:
We will get the diamond, have to wait for the US version that does the different bands.... wich leads me to my next question. What carrier do you think will get the diamond??? AT&T seems to get all the cool stuff.
Click to expand...
Click to collapse
Again, HTC seem to like doing exactly what Apple are not doing, so they may go for multiple carriers. As far as I'm aware the Touch Diamond, and its branded versions, are launching on every network in the UK. That's the complete opposite of Apple's 'one network per country' policy, and they consequently seem to have dropped it (for example, in Italy).
AGREED 100%!! I have been saying this on my podcast for quite a while.. It is a huge mistake. I am now saying since I just received my Diamond that I took one for the team.. I will post my review as the days go by...
SIGHHHH
Dark Fire said:
I don't think HTC cares about America too much any more because it's iPhone territory. As they haven't used their own branding until recently, I think HTC are looking to gain market control and loyalty, and that's easiest where the iPhone hasn't been a huge success.
Again, HTC seem to like doing exactly what Apple are not doing, so they may go for multiple carriers. As far as I'm aware the Touch Diamond, and its branded versions, are launching on every network in the UK. That's the complete opposite of Apple's 'one network per country' policy, and they consequently seem to have dropped it (for example, in Italy).
Click to expand...
Click to collapse
Has anyone been able to connect to Tmobile's USA 3G network in Dallas TX? Anywhere else in the US? Any settings need to be changed?
Search is good:
http://forum.xda-developers.com/showthread.php?t=390575
http://forum.xda-developers.com/showthread.php?t=417121
http://forum.xda-developers.com/showthread.php?t=390449
http://forum.xda-developers.com/showthread.php?t=403539
Search???? But it is some much better for the community to ask the question before searching.
Please close thread.
Before you start flaming, I suggest you read the question. Since you can search, I assume you can read...
The original question was about this service in Dallas TX, which according to multiple sources, the service was just launched on August 27.
Most posts available on Tmobile's 3G state the service is on the 1700 MHz (which the kaiser is not capable). However there are a few people that have stated it might also be in the 2100MHz band.
It is also possible that the Kaise is capable to hook to the 1700MHz band but not enabled by the radio rom. Take the Diamond for example, it was not supposed to support the 850MHz band...
Since Dallas service just started, it is possible 2100MHz is available.
Has anyone been able to prove Tmobile's 3G service is up an running IN DALLAS?
I stand corrected, kind sir. I jumped to a conclusion and was ignorant of the facts related to your specific part of the world. I am sorry.
Did you call TMobile customer service and ask the question? So none of the search results gave you any help. I guess wait and see if you get a reply. Good luck.
3g with tilt ?
smh
jayizzbakk said:
3g with tilt ?
smh
Click to expand...
Click to collapse
I just got 3G here in little old York, Pa. I guess I don't understand your question?
I think what he wants to know if 3g data will work with an at&T branded tilt on tmobile U.S. and if so I would like to know how it compares to the edge network they were using
i think T-Mobile uses 1700/2100 and one band is for uplink and the other is for downlink.
unlike AT&T or Rogers who can use 850 and 1900 independantly for uplink or downlink.
first of all, tmobile sim cards are not 3G compatbile, therefore even the correct settings probably wont pick up any 3G signal...keep in mind that tmobile never updated simcards since its voicestream transition...i remember when AT&T went 3G, they had to issue 3G enabled sim cards....
And my Tilt has a 3G SIM but it's an ATT SIM.
you cant get on tmobiles network with an att sim
Hi everyone--
I have an unmodded, "unlocked" at&t tilt that has a t-mobile gsm sim chip in it. I'm still running the WM6 that came in it, and can't seem to get access to the 3G speeds I know this thing is capable of. I've tried numerous software apps to "force" the phone to go 3G, to no avail. T-Mobile customer "support"--HAA! tells me I need a t-mobile phone to be able to take advantage of the 3G speeds. Needles to say, I feel this is a bunch of malarkey. T-Mobile put out this phone, did they not, and called it the "MDA Vario III"? Is there a rom for the mda that I could flash this thing with so I could get the 3G speeds? Or another rom perhaps? Any suggestions would be most appreciated. Thanks!
tripp
mods: if this post is in the wrong place, please move it where it should be (sorry!)
trippster said:
Hi everyone--
I have an unmodded, "unlocked" at&t tilt that has a t-mobile gsm sim chip in it. I'm still running the WM6 that came in it, and can't seem to get access to the 3G speeds I know this thing is capable of. I've tried numerous software apps to "force" the phone to go 3G, to no avail. T-Mobile customer "support"--HAA! tells me I need a t-mobile phone to be able to take advantage of the 3G speeds. Needles to say, I feel this is a bunch of malarkey. T-Mobile put out this phone, did they not, and called it the "MDA Vario III"? Is there a rom for the mda that I could flash this thing with so I could get the 3G speeds? Or another rom perhaps? Any suggestions would be most appreciated. Thanks!
tripp
mods: if this post is in the wrong place, please move it where it should be (sorry!)
Click to expand...
Click to collapse
Unfortunately, the malarkey is the truth! Because T-Mobile runs its 3G network on a different band than the Tilt is capable of! Sorry, this also effects me as I am a T-Mobile customer using a Tilt as well! My advice is to use Opera mini 4.2 for your internet browsing it is very fast on the Edge network!
The T-Mobile you refer to is European
It does not run on the same 3G as the US T-Mobile. The US T-Mobile uses 1700 Mhz and 2100 Mhz, I believe. The Tilt does not use the 1700 Mhz band. There was a rumor going around that there would be a new version of the Kaiser (KAIS140) that would use the US T-Mobile 3G bands but it was never released for sale. I don't think it will since it is pretty much at the end of the life cycle of the phone. They (HTC) have moved on to newer models with more features. If you would like to use the US 3G and live in an area with 3G, The T-Mobile G1 (HTC Dream) uses T-Mo 3G and has its own section on this forum.
bleh. newer models should still freaking tilt. that is the coolest thing about this phone. and it's pretty solid construction. my friend has had his over a year and its still going strong.
dashmaster1000 said:
Unfortunately, the malarkey is the truth! Because T-Mobile runs its 3G network on a different band than the Tilt is capable of! Sorry, this also effects me as I am a T-Mobile customer using a Tilt as well! My advice is to use Opera mini 4.2 for your internet browsing it is very fast on the Edge network!
Click to expand...
Click to collapse
I thought the Tilt accessed 3G through it's tri band frequencies 850/1900/2100Mhz so that it could connect to most 3G networks worldwide, making it a world business tool for users?
denco7 said:
I thought the Tilt accessed 3G through it's tri band frequencies 850/1900/2100Mhz so that it could connect to most 3G networks worldwide, making it a world business tool for users?
Click to expand...
Click to collapse
True but T-Mobile uses the 1700 for upload and 2100 for download. ATT uses 1900 for both.
I can't tell, 3 different places 3 different freqs for UMTS.
Can someone tell me if this phone can use 3G with AT&T in US?
The X1a will get 3G practically everywhere it exists for AT&T. The X1a tends to be a bit more expensive than the X1i.
The X1i will only get it in certain areas where there is 1900MHz 3G. AT&T is moving towards 850MHz, so it wouldn't be very wise to use the X1i unless you're sure there is strong 1900MHz 3G in your area.
If you are interested in purchasing an X1a, you can also gets the Rogers (Canadian) version which supports AT&T's 3G network. You can find a couple of offers on HowardForums.com. If you're lucky, you can get one of these brand new for under $500. This version is also said not to have the common 'cracking' issue of the X1, but only time will tell.
gsvnet said:
The X1a will get 3G practically everywhere it exists for AT&T. The X1a tends to be a bit more expensive than the X1i.
The X1i will only get it in certain areas where there is 1900MHz 3G. AT&T is moving towards 850MHz, so it wouldn't be very wise to use the X1i unless you're sure there is strong 1900MHz 3G in your area.
If you are interested in purchasing an X1a, you can also gets the Rogers (Canadian) version which supports AT&T's 3G network. You can find a couple of offers on HowardForums.com. If you're lucky, you can get one of these brand new for under $500. This version is also said not to have the common 'cracking' issue of the X1, but only time will tell.
Click to expand...
Click to collapse
Thanks for the info, found an X1a unlocked open box $395.