So, when I upgraded to WM5 I lost MediaNet.
This would have been in Start >> Settings >> Connection Tab >> Conection Icon. Then one of the Drop Downs along with My Work Network and My ISP.
I have no clue how to setup - of cource.
Edit: I think this is it below but I can not connect....
Code:
Tap on Advance tab > Select Networks
Select the drop down to My ISP and click on Edit... > New…
Enter a name for these settings : My GPRS
Select a modem: Cellular Line (GPRS)
Tap on Next
Access point name: wap.cingular or isp.cingular depending upon the plan you are entitled to use. (if not sure of the plan, try wap.cingular)
Username: [email][email protected][/email] or [email][email protected][/email] (depending upon the plan you have as above)
Password: CINGULAR1 (password is case sensitive)
Tap on FINISH > OK > OK > OK >X
here is a link to them all..
if you need help PM me..
http://www.mobilegadgetnews.com/index.php?showtopic=6790
That's the ticket! Thank You VERY MUCH
Code:
WAP Settings for GPRS Profile
Create new GPRS connection.
Description: Cingular WAP
Connects to: The Internet
Access point: WAP.CINGULAR
User name: [email][email protected][/email]
Password: ZJULDAGEN98810
well I think you can use the data acceleration version too.. not sure if you need the pda plan or not though.. glad you got it working..
Accerleration? I messed that on that page... I'll give it a try.
Thanks for you help.
Code:
[U]Data Connect Settings for GPRS Profile[/U]
Create new GPRS connection.
Description: Cingular GPRS
Connects to: The Internet
Access point: ISP.CINGULAR
User name: [email][email protected][/email]
Password: CINGULAR1
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address: (blank)
User name: [email][email protected][/email]
Password: ZXY203DC9K0402
Yep, the above does work and it is much faster! Thanks for pointing that out!
Does any of you know the GRPS configuration for the T-mobile MDA USA?
I lost them and i cannot connect to the internet
Please Help
Thanks
Settings I use . . .
T-Mobile settings
Internet:
Setup a GRPS modem using:
internet3.voicestream.com
or
wap.voicestream.com
I'm using internet 3 because I pay for the VPN service.
My Work Network
T-Mobile WAP
wap.voicestream.com
Proxy settings
Check this network connects to the Internet
Check this network uses proxy server
nothign in proxy server line
click on advanced
WAP 216.155.165.50:8080
MMS Configuration in Mail application
T-Mobile MMS
Gateway: 216.155.165.50
Port: 8080
Server address: http://216.155.174.84/servlets/mms
Connects to My Work Network
jt_armstrong posted the cabs for me in the Wizard forum. Is a little easier than doing it manually..
http://forum.xda-developers.com/viewtopic.php?t=55166
Steven
chow
if you have the t-mobile web plan, your APN is wap.voicestream.com
if you have total internet plan, your APN is internet2.voicestream.com
the t-mobile web is a lot cheaper, you can add the following proxy setting that allow you to get to most of the web, email, and sync with your company exchange.
Proxy setting: getmorespeed.voicestream.com port 8080.
no proxy if you pay for the total internet.
thank you. Worked for me as well.
Re: Settings I use . . .
Hi,
So did you get VPN to work on the phone? If yes, how?
telcontar said:
T-Mobile settings
Internet:
Setup a GRPS modem using:
internet3.voicestream.com
or
wap.voicestream.com
I'm using internet 3 because I pay for the VPN service.
My Work Network
T-Mobile WAP
wap.voicestream.com
Proxy settings
Check this network connects to the Internet
Check this network uses proxy server
nothign in proxy server line
click on advanced
WAP 216.155.165.50:8080
MMS Configuration in Mail application
T-Mobile MMS
Gateway: 216.155.165.50
Port: 8080
Server address: http://216.155.174.84/servlets/mms
Connects to My Work Network
Click to expand...
Click to collapse
I spent a long time with CYTA's customer service trying to get the correct mms settings. So, to save other Kaiser and P3600 owners in Cyprus from all the trouble, here they are:
MMS options
Servers
server name: cytamobile
gateway: 212.31.96.161
port number: 9201
server address: http://mmsc.cyta.com.cy
connect via my isp
settings
connections
connections
my isp
new isp
name: mms gprs
modem: cellular line (GPRS, 3G)
access point name: cytamobile
usename: user
password: pass
advanced
server
use specific server address: 195.14.130.186
I know I personally won't be using this, but I'll still thank you for providing this information to anyone who might need it!
Thank you Jackster if my MMS dont work i'll try it as you said here.
You from Cyprus?
ga41 said:
Thank you Jackster if my MMS dont work i'll try it as you said here.
You from Cyprus?
Click to expand...
Click to collapse
also need to activate the mms option either by calling customer services, or by sending an sms to 8000 number writing 'on mms', or by logging on to cytamobile-vodafone.
yeap from cy
Hi,
I have just purchased a web browsing bolt on for my O2 pay and go account. When I tried to get settings from O2 I was told by them that they have no settings for HTC mobiles - in fact that they didn't support any HTC models. Is this true or are any of you using 02 P&G to access web and email on the Diamond?
Any help would be much appreciated.
Thanks,
Richard
Its true! I cannot receive and send MMS and there is no GPRS conection.
O2 suxx! I'm going to change the operator.
Tesco Mobile do not have any problems with HTC
I am running my Diamond fine with GPRS etc on O2.
Also there are several O2 bundle deals for Diamonds at Expansys (http://www.expansys.com/nc.aspx?i=163250#o2).
When I set up my Diamond it offered an auto-configure settings after first booting which included O2 even though I bought this as standalone sim and contract free from play.com.
ACtually - not sure it will work with Pay & Go - didn't see that bit.
O2 connection settings are here BTW:
http://www.filesaveas.com/gprs.html
I am with o2 on simplicity, I also have the internet bolt on, didnt have to confirgure anything, it downloaded my settings (auto config) and havent had to do a thing. Upgraded firmware to Elite 3 and exactly the same. GPRS EDGE HSDPA all work fine and dandy. I'm in the uk and loving the combination.
Is there any way to run the auto-configure again without a hard reset?
Thanks,
Richard
ziggyred said:
I am running my Diamond fine with GPRS etc on O2.
Also there are several O2 bundle deals for Diamonds at Expansys (http://www.expansys.com/nc.aspx?i=163250#o2).
When I set up my Diamond it offered an auto-configure settings after first booting which included O2 even though I bought this as standalone sim and contract free from play.com.
Click to expand...
Click to collapse
They "don't support" HTC because they sell them under XDA name And o2 in Germany already got XDA Diamond.
Sorry to bump this, just got a Diamond, Im on o2 PAYG (UK)
Tried loads of the settings being banded about online.....
I can access o2's website on the Diamond but nothing else.
Im seriously considering changing provider, but.... I have £75 credit and its been my number for years, I like the extras I get with o2 (texts, rewards etc.)
Has anyone on UK o2 PAYG got it working?
Regards
After weeks of messing I managed to get a friends PDA working on O2 UK PAYG GPRS full internet not just O2 crap its all in the proxy setting i will get them off him and post later.
Tim
There is a way to fool the server into connecting to the web via the WAP APN. Possibly O2 have 'fixed' the workaround, possibly not. It may be worth a try! Be aware that this was published for a previous version of WM, but the settings ought to be similar still:
To setup the XDA on PAYG for internet:
Go to Settings, click on the Connections tab & click on "Connections"
In the first dropdown, "When needed, automatically connect to The Internet using these settings:" select "New..." and give the connection a name (Mine's O2 Wap)
On the "Modem" tab, click on "New..." to create a new modem specification. Give the specification a name (Mine's O2 PAYG GPRS). For the Modem selection, use Cellular Line (GPRS) and set the Baud Rate to 57600 and click on Next.
For the Access point name, use payandgo.o2.co.uk and click Finish
Next, click on the Proxy Settings, and put a check in both the boxes & click Advanced.
Use the following server addresses & ports:
HTTP: 193.113.200.195 port 8080
WAP: 193.113.200.195 port 8080
SOCKS: 193.113.200.195 port 1080 (not sure if this works as I've never had to use it)
OK your way back out to the today screen and launch Internet Explorer
When launching any website for the first time, you'll be asked for a username, password and domain.
Username: payandgo
Password: password
Domain: <empty>
Cheers Tim, that'd be fantastic.
Johnston4111 - Ill give that a shot shortly - menues are pretty similar.
Johnston411 said:
There is a way to fool the server into connecting to the web via the WAP APN. Possibly O2 have 'fixed' the workaround, possibly not. It may be worth a try! Be aware that this was published for a previous version of WM, but the settings ought to be similar still:
To setup the XDA on PAYG for internet:
Go to Settings, click on the Connections tab & click on "Connections"
In the first dropdown, "When needed, automatically connect to The Internet using these settings:" select "New..." and give the connection a name (Mine's O2 Wap)
On the "Modem" tab, click on "New..." to create a new modem specification. Give the specification a name (Mine's O2 PAYG GPRS). For the Modem selection, use Cellular Line (GPRS) and set the Baud Rate to 57600 and click on Next.
For the Access point name, use payandgo.o2.co.uk and click Finish
Next, click on the Proxy Settings, and put a check in both the boxes & click Advanced.
Use the following server addresses & ports:
HTTP: 193.113.200.195 port 8080
WAP: 193.113.200.195 port 8080
SOCKS: 193.113.200.195 port 1080 (not sure if this works as I've never had to use it)
OK your way back out to the today screen and launch Internet Explorer
When launching any website for the first time, you'll be asked for a username, password and domain.
Username: payandgo
Password: password
Domain: <empty>
Click to expand...
Click to collapse
Looks like it worked, you can set the username and password in Proxy settings on the Diamond Menaing no need to enter it at first connection.
This will use my bolt on. correct?
BTW, THANKS!!!!
As far as i know it does.
If not you'll soon notice your credit evaporating.
OggyUK said:
This will use my bolt on. correct?
Click to expand...
Click to collapse
yep it just uses your bolt-on my mates been using these settings for 3 months now with no problems.
Tim
Yeah, bolt on.
Are you lot able to use Remote Desktop? I cant use Live services, Youtube or RD.
This close to taking a contract out with another provider that suport this phone
XDA Ignito is listed as a future handset on O2 UK intranet - all I can say.
So yes, we do support it.
I've got a Diamond and can use picture messages and the internet as well as Live Messenger and Youtube. I don't use RD but I presume it'll work.
I'm on a staff simplicity tariff with the unlimited web bolt on and it all works fine.
Care to share details? do you have different logins?
Youtube loads but videos dont play, I get a synchronisation failed error on Windows Live.
Connection name: mobile web
Modem: Celluar Line (GPRS, 3G)
Access point name: mobile.o2.co.uk
Username: O2web
Password: password
Those work for me, create a new connection in Connection settings. The auto setup tool did it all for me though.
That works for you as you are on a contract.
You won't get wlm etc... on the wap work around on pay as you go. Not sure about remote desktop but i guess it's all related to the proxy.
Remote desktop and messenger both use secure connections so how about trying entering 193.113.200.195 in the WAP Secure section in proxy and try it the following ports numbers 8080,9201,443.
Its only a guess but worth a try I think
Tim
I have Hyperdragon IV IOLite on my at&t tilt with radio 1.65.21.18. I am having troubling getting a solid internet connection though. My current settings:
Name: Media Net
Modem: Cellular Line (GPRS, 3G)
Access point: wap.cingular
Username/password/domain - blank
Advanced: user server assigned IP, use IP header compression, use specific server addresses - 4.2.2.1, 4.2.2.2
When I turn on my data connection it looks like it makes a successfully connection, but when I load up PIE and try to get to google it just sits on 'Locating...' and eventually times out with "The page cannot be found. Check the name and try again."
Did I miss a setting somewhere? I don't think I've got a proxy set anywhere. Skyfire also fails to load and minimo isn't working either.
ETA: I can make/receive calls, and send/recieve SMS and MMS messages. Just the internets are failing me!
look for the att settings cab file and run that. This will insure that you have all the right settings, also you might want to uncheck the proxy, where ever that is.
Lordy, I finally found that old AT&T internet settings thread. Someone should really add this info to the AT&T Wiki:
Connects to: The Internet
Access point: wap.cingular
Username: [email protected]
Password: CINGULAR1
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address: (blank)