Propblems with speakerphone after AT&T WM 6.1 upgrade - Tilt, TyTN II, MDA Vario III General

Hi all,
Sorry if this has been noted as one of the bugs with the official 6.1 upgrade, but after a bit of searching I was unable to find anything. Everything seemed to be fine until a couple hours ago. I was at work and hence had not used the phone itself for a while. I was setting up my email accounts again. then a hour or so later, the phone started vibrating for a notification of new emails and would not stop. I had to do a reboot. Now, every time I try to place a call, it uses the speakerphone, and will not switch back no matter what I do. I hit the button for speakerphone and there it says it has changed, and the icon in the status bar on the top also changes, but it still uses the speakerphone. I've not tried with my bluetooth in my car yet to see if that is working ok...
Any suggestions? This is a real problem for me and one that I need an answer to sooner rather than later.
Thanks in advance for your help.

Solved - the problem was with SRS Wow HD audio driver
Just FYI - incase anyone else is having the same problem.
I worked backwards and unintsalled each program I had put on one by one and tested the phone. Turned out that I forgot I had installed SRS Wow HD sound driver. Once I uninstalled that and rebooted, everything has worked fine since.
Sad that this does not work with 6.1 as it was a really nice piece of software.

Related

Buggy damned Tilt official 6.1...

I've flashed my 8925 twice and hard reset it once, I've tried with and without having allowed the ATT customizations, and still there's a bunch of stupid little crap that is driving me nuts. Please note: these bugs are with no additional software installed.
Can't keep the backlight from timing out. I've always disliked the default of having the screen auto dim: if the screen is on I'm probably *looking* at it, otherwise I'd have turned it off... I've tried everything, setting no backlight time out, leaving it checked but matched to the screen shutoff, it shows the right thing in the control panel and stays on after I leave that screen, but usually within minutes or especially after I've used the phone it'll start dimming at 10 seconds again--even though turn off backlight is still unchecked in the backlight control panel.
Missed calls / call log badly broken: I'll get the missed call notification but when I try to see the caller it shows the log as empty, and when I go into the log manually from the phone app it also shows empty--doesn't even have my outgoing calls.
Voicemail notification got stuck on. I can probably call ATT and have them fix this on their end in minutes but it's bloody annoying that my phone's been notifying me of a long deleted voicemail message for days.
Anybody else having any of these problems?
Anybody know a fix for any of them?
I've already tried advanced_configuration, no great help there.
What's the latest/best cooked ROM? I like that the official has stuff like Voice Command and Sprite Backup, would like to keep them...
I haven't noticed any of those problems. I have however had problems with the phone being really sluggish at times. Still testing with no apps installed. I don't have the backlight problem. I have just used the settings in Kaiser Tweak and everything is working. Not sure that I will keep using it though. I will probably go back to Hyperdragon's newest ROM's. Those always seem to work really well for me.
No issues with the official AT&T ROM either.
wmg76 said:
I have however had problems with the phone being really sluggish at times.
Click to expand...
Click to collapse
Are you using the right SPL?
I did not try the rom. But I heard cleartype w/ landscape problem still exist w/ this rom (like the official HTC 6.1 rom). It could be fix by replacing the ddi.dll but will probably break Opera mini 9.5.
Problems??? Pull up a chair! First I installed the ROM and none of my would work. I couldn't connect to the internet. I downloaded the ROM again and reflashed it. This time icons started disappearing on my phone. I did a soft reset. Nothing. Did a hard reset. Nothing. I reflashed. Loaded my apps, they actually worked. I set up my email, and I could connect to the internet. Great! Finally! One hour later, I got a phone call, but my phone didn't ring. Huh?Anyway, answered it, when the other party spoken it came out the speakerphone. I checked my device and there was no sound: ringtones,music games,alarms. Soft reset...Startup sound played..loaded up and no sound. Call ATT for a help, they decided to send me a replacement. Bad device, I guess. So I redownloaded the ROM and tried a different phone( i know, i know), can't get email to work, can't get MMetrics work. I quit!I will be going to custom ROM! I have a lot of reading to do.
Been using the new AT&T Rom since it was released and not having any issues. The only minor problem I have is that I'm seeing some compatibility issues with the version of S2U2 that I am using. Otherwise, good to go.
I don't get how people are having problems with this. Everything works flawlessly with me.
Except threaded messaging sucks, but with Kaiser Tweak, I turned it off.
I have had only 3 major issues with this rom.
1: Camera works, but doesn't show anything on the screen. I have a black screen, press the capture button, and I get a picture, but I can't tell what I am looking at until I take the picture. Working on this issue now. [Update] I just installed HTC Camera v5.04 b29195.00 http://rapidshare.com/files/99227062/HTC_Camera_v5.04_b29195.00__PPC_.CAB . Works Perfect now!
2. Battery life was HORRID! After 10 minutes I was down to 90%, while it sat on the desk, screen off, nothing running. After switching from 1.65.21.18 to 1.65.21.14, life was peachy. 8 hours with normal usage and only down to 80%.
3. Blue Tooth drops erratically. I connected my bt headset to the phone, made a call, after 10 or 15 minutes, it dropped the headset. BT stayed turn on, but headset couldn't be found. Turned off headset, turned back on, magically found. Haven't figured out what is causing this, but am researching that as well. OK, So I got on HTC's website to see if there was an update. There is no update for BT for the Tilt WM6.1. However, there is a fix for TYTN II WM6.0. http://www.htc.com/europe/SupportDownload.aspx?p_id=13&cat=0&dl_id=60. I decided to try this fix, installed thinking I would get the whole "this program was built for a previous version" garbage, but I didn't get that. Anyway, I am going to try this tomorrow when I make my calls. I will update if I notice it fixes my issues.
Otherwise, it's fast, good signal, good sound quality, etc. Overall I am pretty happy. Will be happier when I finally get the BT to stop dropping, as I travel a lot and it's illegal to talk on the phone w/o a hands free on any military installation.... Sorry if I didn't answer any problems others are having on this actual forum, but maybe someone else will be having the same issue and see my posts for my fixes. Thanks!
zip, zero, nada.......UI is faster, apps are faster, threaded SMS is really nice to have, MSVC works as advertised with my JB2.
Different Alarm Sounds!!
I have a small WAV file that I use as an alarm sound but now can't get the sound listing in the alarm setup. I use to put it in application data/sounds. It now doesn't show up if I put it there or anywhere else (/windows, /my documents/my ringtones). Anyone else have this problem?
eltrebor said:
I have a small WAV file that I use as an alarm sound but now can't get the sound listing in the alarm setup. I use to put it in application data/sounds. It now doesn't show up if I put it there or anywhere else (/windows, /my documents/my ringtones). Anyone else have this problem?
Click to expand...
Click to collapse
All my WAV and MIDI files in the root of Windows show up fine. How small is the file? 600kb is the size limit for sounds on AT&T ROMs unless you modify the registry key that restricts it. 600k may be large for an mp3 file, but that's only mere seconds of a WAV file.
I upgraded as soon as it was available and am seriously considering going back to the old WM6.0 ROM, which worked well. I have had several lockups and had to soft-reset. I have also had problems with calls. Once, it rang and shoed me the call, but wouldn't let me pick it up. Other times I have had echos. GPS lock time is also much longer. Oh, yes, the equalizer in TCPMP creates terrible distortion. It worked great in 6.0. And I am using the recompiled version.
It is great to get results of satisfaction with the new ROM, but I personally would like to know, for those who have been having problems and those, answers to some questions:
1 Which SPL
2 Which radio
3 Activesync or POP for email
4 Bloatware installed or not
5 PIE or other browser
I am sure that there are others, but those are what come to mind for the moment.
No Problems Here
FWIW, I think my Tilt is running much better with the new ROM. I've only had it (the new ROM) for a couple of days, but TT7 and Google Maps seem to run faster, and It seems to detect WIFI networks MUCH faster than with the old ROM. I'm a happy camper, at least for now.
I've noticed that its been alot slower and I don't like having a button devoted to the ringtone volume. The other HTC Tab I was using that was supposed to be an official use had Music allowing me to access Windows Media very easily now I can't. I also noticed my dialing pad is different and not the same as it was. I also don't like the threaded SMS on Windows Mobile it doesn't suit it. It makes it look very confusing and also I've noticed it has problems moving the screen upwards so that I can see what is being written in the space. Another thing I notice is randomly the HTC Home screen cuts itself off cutting off portions of the tab information. Its something to get used to but I don't see it happening cause I can't figure out what happened to some items on the phone like my GPS doesn't work, I am experiencing worse internet problems than before, Wifi dies frequently, and the dialer doesn't seem to work like it used to. Its a disappointment.
NotATreoFan said:
All my WAV and MIDI files in the root of Windows show up fine. How small is the file? 600kb is the size limit for sounds on AT&T ROMs unless you modify the registry key that restricts it. 600k may be large for an mp3 file, but that's only mere seconds of a WAV file.
Click to expand...
Click to collapse
Which key? I have been hunting... and no luck so far.
Backlight timeout linked to lock??
When I re-downloaded the software and re-flashed a *third* time things seemed to work better. The only thing I did differently was skip the 'setup a password' that last time I flashed.
The phone worked pretty well all weekend, and then this morning I finally put in owner info and set a pin password.
And I just noticed the backlight has started dimming after 10 seconds (or less) again. Restart didn't correct it, nor did changing the setting in advanced config so the screen doesn't dim for unlock screen.
For now I turned off lock and went into the backlight tab and it's stopped doing it. BLOODY ANNOYING. I've seen mention of the backlight timeout bug in other forums too...
Even while the phone was working well over the weekend I noticed that fairly often the first attempt to bring it out of standby flashes the screen on then it goes back off, comes on and stays on when I press power the second time.
I ran into the idiotic bug where text is white on white when in landscape mode, know I saw something about that being a cleartype bug or something and there being a fix, but why the hell would it be released like that?
Also, I can NOT get the 'message sent' notification to disable... does 'advanced config' not actually work?
Buggy is an understatement!
Having been unable to bear/ignore the bugs I reverted back to 6.0
Here's what I along with you guys have issues with.
1)Ringtones revert back to it's default tone whenever I open: Settings>Phone
2) Back-light reverts back to 10 seconds at random and often.
3) Google maps will not display letters when searching for places, but it'll invisibly type
4) Typical freezes on pages and things of that nature
5) Bloatware..
SeekerJBP said:
Which key? I have been hunting... and no luck so far.
Click to expand...
Click to collapse
I'll help you out here
Go into HKEY_CurrentUser --> ControlPanel --> Sounds --> FileSizeLimit ( it's a DWORD value)
Just delete the DWORD value, and bam, enjoy .
EDIT : wow, just realized this is my first post. I've been browsing the site since the Tilt came out, but I guess I've never found it necessary to post. haha!
TheCritic said:
Can't keep the backlight from timing out. I've always disliked the default of having the screen auto dim: if the screen is on I'm probably *looking* at it, otherwise I'd have turned it off... I've tried everything, setting no backlight time out, leaving it checked but matched to the screen shutoff, it shows the right thing in the control panel and stays on after I leave that screen, but usually within minutes or especially after I've used the phone it'll start dimming at 10 seconds again--even though turn off backlight is still unchecked in the backlight control panel.
Click to expand...
Click to collapse
I have the exact same problem with my 8925. My work buddy across the hall does not have this problem with his 8925. Running WM6.0 my screen has ALWAYS dimmed at boot, as well as after a call ended; his has never done so. Now, after we've both upgraded to WM6.1, I have all my same problems, as well as the additional 10 second auto dimming that I did not encounter with WM6.0, he still has none.
No matter what settings I change, no matter if connected to power, USB, or none, my screen dims after 10 seconds. I can get it to temporarily revert back to the setting of my choice, by going into the settings and then back out, but if I manually dim the phone, get a call, or pretty much anything, it defaults back to the automatic 10 second dimming. I'm so pissed off about this. S2U2 also automatically kicks in on every screen dim, so I can't use it while the dim prob is going on. Certainly someone within this HUGE base of geniuses has a definitive answer for this.
Lots of little bugs in this release.
Google maps doesn't like it.
Can't get TCPMP to work.
Gets sluggish.
MSVC doesn't notify.
Other things I can't think of now.
Pretty irritating to say the least.

VoIP and sleep during calls -> no call possible

Hi folks,
thought i write down my problem since i've been trying for quite a few months now to get rid of this problem:
First of all i need to tell that i am using dutty's v4 rom. I did not have the problem at all with some other roms, but i'd like to keep on using Dutty v4 since it is very fast, non-laggy with manila3D, and rock-stable.
So here is the deal:
After setting up my VoIP account, tweaking WLAN to keep attached to the AccessPoint even when the Diamond goes into sleep - I managed to make a VoIP test call to my provider via WLAN.
Everything works just fine - until the device falls into sleep after a couple of seconds.
Annoying thing is that it perfectly works with normal GSM calls even when it goes to sleep, but not with VoIP calls.
Not that i needed the display to work during the call - but audio as well as recorded audio - which gets lost as soon as the Diamond falls into sleep. I have to reactivate the display to hear/speak with the other person. So after i've done that it takes a random time until it falls asleep again. This takes about 2-10 seconds.
I've tried everything - DiamondTweak, Advanced Config, nosleep!!.cab, registry tweaks - nothing works. After i had that problem the first time with Dutty's rom v3.4, i also wrote him while ago. He fixed this issue in v3.7. Somebody got an idea what he did?
Now that v4 is out, the problem sometimes persists. It worked fine just after flashing the rom, then it suddenly stopped working after 3 Weeks. Now i made a hard reset, first thing afterwards i did: install all the voip stuff needed and it didn't work from the beginning.
It seems to be a problem affecting certain types of roms and their configuration, but i couldn't find out by now what's the exact matter. Even if the screen would turn off, but audio keeps on just to talk to each other (if i remember right, the Diamond is a phone too? this would be awesome!
After spending days with searching for it, the ultimate solution hasn't been posted on this forum so far. So if someone knows what to do about this, even if it means to recook a rom - please tell me!
Please read what i already tried before giving answers, and thanks in advance for any real help!

Incoming call screen disappears - can't answer call!

Hi all,
Friend and I both have the Incredible S, loving it! He has a slight issue and I can't for the life of me solve it. Everything was working fine but now when he has an incoming call and the screen is off the incoming call screen flashes up briefly then disappears and device shows normal 'desktop' - you can't answer the call!
If you call his phone and the screen is active, incoming call screen pops up as expected and you can answer call.
Any ideas peeps?
Thanks
Ant
Hmmm,
I'm having the exact same problem. Running Fresh Evo on HTC Evo. Would love to know why this is happening. Any ideas?
Sliphorn said:
Hmmm,
I'm having the exact same problem. Running Fresh Evo on HTC Evo. Would love to know why this is happening. Any ideas?
Click to expand...
Click to collapse
Never worked it out, friend did factory reset in the end to fix it.
Ant
Bummer. Here's some info:
Latest Fresh EVO
Rom Manager
Rom Manager Janitor
Juice Defender Ultimate Juice
Titanium Backup Pro
Cachemate for Root
ShootMe
Adfree Android
adbwireless
Call Control (problem before this, though)
Launcher Pro
Any hints?
Having the same exact issue. This sucks... This started today for me around noon ( no calls before then), and has persisted throughout the day. Yesterday was fine.
I use Google voice for all of my calls.
The only thing I've done today that I haven't done every other day was that I installed the Gtalk app this morning. In the past, I've used Gmail directly. However, my computer was off during at least one of the phone calls I received today, so I can't imagine this could be it...
Perhaps because I installed gAlwaysIdle (an addition to Gtalk that makes you never go idle or always be idle) as well?
Does this correspond with anyone else's experience?
I'll probably just reflash my phone
<Rooted Atrix 4g running GingerBlur>
hmm this sounds like a serious firmware problem tho..
all i could suggest is flash a firmware that the most of the ppl are using, and dont got probs with...
well doing a good reboot seems to help alot these days. So disable the fastboot option en turn it off, wait a while (10 secs should be enough) en start the device again.
Also had some of the trouble like crashing things and this solved it for me. Give it a try and hope it will fix it.
Otherwise there seems to be no other way than a factory reset (go htc!)

[Q] Phone kinda reboots with incoming call

I upgraded my Captivate to gingerbread/talon/continuum yesterday.
That went fine and everything was hunky dory.
Phone was working fine the whole day today, incoming/outgoing calls, data.
I came home and installed Skype and thats when all hell broke loose.
Now the phone part is dead (kinda!). I can make calls fine but if I get a incoming call, the call gets disconnected after 1 ring and I get a msg popup (like some error) but I cant really see what the message is.
I also noticed that it disconnects me from ATT network when a call comes in and then after a little bit it reconnects.
I also verified this by going to the About->Status screen and then making a call.
It normally says ATT but for a couple of secs after call drop it says 'Unknown'.
What did I do to screw it up and how can I fix it?
Thanks
Glaring obvious first question -- did you try uninstalling Skype to see if that resolved anything?
mK
mommehK said:
Glaring obvious first question -- did you try uninstalling Skype to see if that resolved anything?
mK
Click to expand...
Click to collapse
Sorry, I should have added that to my first post.
Yes, I did uninstall Skype and reboot the phone, just incase, but no difference.
Still the same.
Update:
After playing around with various things for a couple of hrs, I finally gave up and reflashed Continuum.
Everything started working again.
Applied my Ti backed up config and loaded Netflix. Same problem. Dialer died with an incoming call.
I reflashed Continuum again and everything started working as expected.
I then applied my Ti backup, still everything working.
I am in the process of updating all my apps and then lets see if everything is still working.
The only thing that is missing for now is the Netflix app.
I will keep everyone updated if its the Netflix app causing the issue or its the Skype.
activemind: Keep us posted if you find a cause. I am on a Samsung Vibrant (3g) via TMOB but have been having the same issue today with a completely different rom (simply honey). This is actually about the 6th thread I've found in the past two days having this same issue on Galaxy S phones.
I have had this problem before and what caused it was restoring system data with titanium. Make sure you are only restoring apps.
Sent from my GT-I9000 using XDA Premium App

[Q] Tilt to wake seems to have stopped working

For some reason, tilt to wake stopped working. I have no idea why. It was working fine yesterday morning in the metro, but stopped working during the day. The watch is paired with a HTC One M7, running a stock Sense ROM. I've converted the phone to GPE back in December and the watch worked well, but now I reinstalled a stock ROM because GPE was draining my battery real quick and, again, the watch worked well for a couple of days, but now, nope. I tried resetting the watch, but no result. Is there any other way to figure out what the problem is without reinstalling every piece of software? I mean, I'd like to test the sensors to see if they have a problem or smth and if they turn up to be good, well, I might contact Google cuz something's not working. Yes, the tilt to wake option is enabled in the companion app.
So, does anyone have an idea of what I can do? I couldn't find any info on any forum
Thanks in advance :3

Categories

Resources